Untitled

mail@pastecode.io avatar
unknown
plain_text
2 months ago
55 kB
2
Indexable
Never
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x51df805e]
[    0.000000] Linux version 6.7.4-sm7150 (pmos@ThinPad) (aarch64-alpine-linux-musl-gcc (Alpine 13.2.1_git20231014) 13.2.1 20231014, GNU ld (GNU Binutils) 2.41) #6 SMP PREEMPT Fri Feb 16 17:44:32 UTC 2024
[    0.000000] KASLR enabled
[    0.000000] random: crng init done
[    0.000000] Machine model: Xiaomi Mi 11 Lite 4G
[    0.000000] efi: UEFI not found.
[    0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[    0.000000] OF: reserved mem: 0x0000000085700000..0x0000000085cfffff (6144 KiB) nomap non-reusable memory@85700000
[    0.000000] OF: reserved mem: 0x0000000085d00000..0x0000000085efffff (2048 KiB) nomap non-reusable memory@85d00000
[    0.000000] OF: reserved mem: 0x0000000085f00000..0x0000000085f1ffff (128 KiB) nomap non-reusable memory@85f00000
[    0.000000] OF: reserved mem: 0x0000000085f20000..0x0000000085f3ffff (128 KiB) nomap non-reusable memory@85f20000
[    0.000000] OF: reserved mem: 0x0000000085fff000..0x0000000085ffffff (4 KiB) nomap non-reusable memory@85fff000
[    0.000000] OF: reserved mem: 0x0000000086000000..0x00000000861fffff (2048 KiB) nomap non-reusable memory@86000000
[    0.000000] OF: reserved mem: 0x0000000086200000..0x0000000088efffff (46080 KiB) nomap non-reusable memory@86200000
[    0.000000] OF: reserved mem: 0x000000008ab00000..0x000000008affffff (5120 KiB) nomap non-reusable memory@8ab00000
[    0.000000] OF: reserved mem: 0x000000008b000000..0x00000000933fffff (135168 KiB) nomap non-reusable memory@8b000000
[    0.000000] OF: reserved mem: 0x0000000093400000..0x00000000938fffff (5120 KiB) nomap non-reusable memory@93400000
[    0.000000] OF: reserved mem: 0x0000000093900000..0x00000000956fffff (30720 KiB) nomap non-reusable memory@93900000
[    0.000000] OF: reserved mem: 0x0000000095700000..0x0000000097cfffff (38912 KiB) nomap non-reusable memory@95700000
[    0.000000] OF: reserved mem: 0x0000000097d00000..0x0000000097e7ffff (1536 KiB) nomap non-reusable memory@97d00000
[    0.000000] OF: reserved mem: 0x0000000097e80000..0x0000000097efffff (512 KiB) nomap non-reusable memory@97e80000
[    0.000000] OF: reserved mem: 0x0000000097f00000..0x0000000097f0ffff (64 KiB) nomap non-reusable memory@97f00000
[    0.000000] OF: reserved mem: 0x0000000097f10000..0x0000000097f14fff (20 KiB) nomap non-reusable memory@97f10000
[    0.000000] OF: reserved mem: 0x0000000097f15000..0x0000000097f16fff (8 KiB) nomap non-reusable memory@97f15000
[    0.000000] OF: reserved mem: 0x000000009c000000..0x000000009c9e33ff (10125 KiB) nomap non-reusable framebuffer_region@9c000000
[    0.000000] OF: reserved mem: 0x000000009d700000..0x000000009d7fffff (1024 KiB) nomap non-reusable memory@9e300000
[    0.000000] OF: reserved mem: 0x000000009d800000..0x000000009dbfffff (4096 KiB) map non-reusable ramoops@9d800000
[    0.000000] OF: reserved mem: 0x000000009e400000..0x000000009f7fffff (20480 KiB) nomap non-reusable memory@9e400000
[    0.000000] OF: reserved mem: 0x000000009f800000..0x00000000a15fffff (30720 KiB) nomap non-reusable memory@9f800000
[    0.000000] OF: reserved mem: 0x00000000fe201000..0x00000000fe800fff (6144 KiB) nomap non-reusable memory@fe201000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000001fcbfffff]
[    0.000000] NUMA: NODE_DATA [mem 0x1fc02e8c0-0x1fc030fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001fcbfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000856fffff]
[    0.000000]   node   0: [mem 0x0000000085700000-0x0000000085f3ffff]
[    0.000000]   node   0: [mem 0x0000000085f40000-0x0000000085ffefff]
[    0.000000]   node   0: [mem 0x0000000085fff000-0x0000000088efffff]
[    0.000000]   node   0: [mem 0x0000000088f00000-0x000000008aafffff]
[    0.000000]   node   0: [mem 0x000000008ab00000-0x0000000097f16fff]
[    0.000000]   node   0: [mem 0x0000000097f17000-0x000000009bffffff]
[    0.000000]   node   0: [mem 0x000000009c000000-0x000000009c9e2fff]
[    0.000000]   node   0: [mem 0x000000009c9e4000-0x000000009d6fffff]
[    0.000000]   node   0: [mem 0x000000009d700000-0x000000009d7fffff]
[    0.000000]   node   0: [mem 0x000000009d800000-0x000000009e3fffff]
[    0.000000]   node   0: [mem 0x000000009e400000-0x00000000a15fffff]
[    0.000000]   node   0: [mem 0x00000000a1600000-0x00000000fe200fff]
[    0.000000]   node   0: [mem 0x00000000fe201000-0x00000000fe800fff]
[    0.000000]   node   0: [mem 0x00000000fe801000-0x00000001fcbfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000001fcbfffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 13312 pages in unavailable ranges
[    0.000000] cma: Reserved 32 MiB at 0x00000000fc200000 on node -1
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] psci: OSI mode supported.
[    0.000000] psci: [Firmware Bug]: failed to set PC mode: -3
[    0.000000] percpu: Embedded 21 pages/cpu s45416 r8192 d32408 u86016
[    0.000000] pcpu-alloc: s45416 r8192 d32408 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: PMOS_NOSPLASH console=tty0 console=null androidboot.verifiedbootstate=orange androidboot.keymaster=1  androidboot.bootdevice=1d84000.ufshc androidboot.fstab_suffix=default androidboot.oled_wp=808081 androidboot.boot_devices=soc/1d84000.ufshc androidboot.serialno=86713ecc androidboot.ramdump=disable androidboot.secureboot=1 androidboot.cpuid=0x2a7f944a androidboot.hwversion=9.19.0 androidboot.cert=M2101K9AG androidboot.hwc=GLOBAL androidboot.hwlevel=MP androidboot.product.hardware.sku=courbet log_buf_len=2M loglevel=6 androidboot.baseband=msm msm_drm.dsi_display0=mdss_dsi_k9a_36_02_0a_mp_dsc_cmd: androidboot.dtb_idx=-1347440721 androidboot.dp=0x0
[    0.000000] Unknown kernel command line parameters "PMOS_NOSPLASH", will be passed to user space.
[    0.000000] printk: log_buf_len: 2097152 bytes
[    0.000000] printk: early log buf free: 124616(95%)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1535183
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 8.
[    0.000000] software IO TLB: mapped [mem 0x00000000f8200000-0x00000000fc200000] (64MB)
[    0.000000] Memory: 5635932K/6238204K available (13120K kernel code, 1410K rwdata, 4620K rodata, 2752K init, 467K bss, 569504K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: 928 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000192] Console: colour dummy device 80x25
[    0.000201] printk: legacy console [tty0] enabled
[    0.000371] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.000382] pid_max: default: 32768 minimum: 301
[    0.000444] LSM: initializing lsm=capability,integrity
[    0.000521] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000542] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.002044] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.002098] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.002302] rcu: Hierarchical SRCU implementation.
[    0.002308] rcu: 	Max phase no-delay instances is 1000.
[    0.002972] EFI services will not be available.
[    0.003205] smp: Bringing up secondary CPUs ...
[    0.004333] Detected VIPT I-cache on CPU1
[    0.004408] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
[    0.004464] CPU1: Booted secondary processor 0x0000000100 [0x51df805e]
[    0.005556] Detected VIPT I-cache on CPU2
[    0.005610] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
[    0.005651] CPU2: Booted secondary processor 0x0000000200 [0x51df805e]
[    0.006787] Detected VIPT I-cache on CPU3
[    0.006836] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
[    0.006874] CPU3: Booted secondary processor 0x0000000300 [0x51df805e]
[    0.008088] Detected VIPT I-cache on CPU4
[    0.008139] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[    0.008176] CPU4: Booted secondary processor 0x0000000400 [0x51df805e]
[    0.009491] Detected VIPT I-cache on CPU5
[    0.009546] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
[    0.009583] CPU5: Booted secondary processor 0x0000000500 [0x51df805e]
[    0.011670] CPU features: detected: Spectre-v2
[    0.011716] CPU features: detected: ARM erratum 1418040
[    0.011733] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
[    0.011741] Detected PIPT I-cache on CPU6
[    0.011868] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
[    0.011899] arch_timer: Enabling local workaround for ARM erratum 1418040
[    0.011937] CPU6: Booted secondary processor 0x0000000600 [0x51df804e]
[    0.013875] Detected PIPT I-cache on CPU7
[    0.014020] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
[    0.014051] arch_timer: Enabling local workaround for ARM erratum 1418040
[    0.014092] CPU7: Booted secondary processor 0x0000000700 [0x51df804e]
[    0.014246] smp: Brought up 1 node, 8 CPUs
[    0.014266] SMP: Total of 8 processors activated.
[    0.014270] CPU features: detected: 32-bit EL0 Support
[    0.014274] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.014278] CPU features: detected: Common not Private translations
[    0.014281] CPU features: detected: CRC32 instructions
[    0.014286] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.014289] CPU features: detected: LSE atomic instructions
[    0.014293] CPU features: detected: Privileged Access Never
[    0.014296] CPU features: detected: RAS Extension Support
[    0.014393] CPU features: detected: Hardware dirty bit management on CPU6-7
[    0.014401] CPU: All CPU(s) started at EL1
[    0.014404] alternatives: applying system-wide alternatives
[    0.019128] devtmpfs: initialized
[    0.038707] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.038738] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.039751] pinctrl core: initialized pinctrl subsystem
[    0.040323] DMI not present or invalid.
[    0.041177] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.042692] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.043202] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.043616] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.043684] audit: initializing netlink subsys (disabled)
[    0.043818] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.044355] thermal_sys: Registered thermal governor 'step_wise'
[    0.044366] thermal_sys: Registered thermal governor 'power_allocator'
[    0.044440] cpuidle: using governor menu
[    0.044950] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.045186] ASID allocator initialised with 32768 entries
[    0.045605] Serial: AMBA PL011 UART driver
[    0.047288] pstore: Using crash dump compression: deflate
[    0.047304] printk: legacy console [ramoops-1] enabled
[    0.047775] pstore: Registered ramoops as persistent store backend
[    0.047785] ramoops: using 0x400000@0x9d800000, ecc: 0
[    0.065186] platform 1d84000.ufshc: Fixed dependency cycle(s) with /soc@0/phy@1d87000
[    0.072568] platform ae00000.display-subsystem: Fixed dependency cycle(s) with /soc@0/clock-controller@af00000
[    0.078892] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[    0.078912] Modules: 0 pages in range for non-PLT usage
[    0.078920] Modules: 518656 pages in range for PLT usage
[    0.079807] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.079823] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.079836] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.079844] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.079854] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.079861] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.079871] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.079878] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.082922] iommu: Default domain type: Translated
[    0.082934] iommu: DMA domain TLB invalidation policy: strict mode
[    0.083284] SCSI subsystem initialized
[    0.083518] usbcore: registered new interface driver usbfs
[    0.083556] usbcore: registered new interface driver hub
[    0.083600] usbcore: registered new device driver usb
[    0.083728] pps_core: LinuxPPS API ver. 1 registered
[    0.083736] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.083757] PTP clock support registered
[    0.083804] EDAC MC: Ver: 3.0.0
[    0.084403] CPUidle PSCI: Initialized CPU PM domain topology using OSI mode
[    0.084807] scmi_core: SCMI protocol bus registered
[    0.084933] qcom_scm: convention: smc arm 64
[    0.085791] Advanced Linux Sound Architecture Driver Initialized.
[    0.086744] vgaarb: loaded
[    0.087292] clocksource: Switched to clocksource arch_sys_counter
[    0.087584] VFS: Disk quotas dquot_6.6.0
[    0.087657] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.095194] NET: Registered PF_INET protocol family
[    0.095571] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.106887] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.106957] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.106979] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.107498] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.108669] TCP: Hash tables configured (established 65536 bind 65536)
[    0.108794] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.108915] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.109153] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.109563] RPC: Registered named UNIX socket transport module.
[    0.109576] RPC: Registered udp transport module.
[    0.109583] RPC: Registered tcp transport module.
[    0.109590] RPC: Registered tcp-with-tls transport module.
[    0.109597] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.109615] PCI: CLS 0 bytes, default 64
[    0.109782] Trying to unpack rootfs image as initramfs...
[    0.116915] Initialise system trusted keyrings
[    0.117117] workingset: timestamp_bits=42 max_order=21 bucket_order=0
[    0.117528] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.117788] NFS: Registering the id_resolver key type
[    0.117839] Key type id_resolver registered
[    0.117862] Key type id_legacy registered
[    0.117900] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.117919] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.152478] Freeing initrd memory: 1652K
[    0.204613] Key type asymmetric registered
[    0.204647] Asymmetric key parser 'x509' registered
[    0.204668] Asymmetric key parser 'pkcs8' registered
[    0.204760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.204932] io scheduler mq-deadline registered
[    0.204944] io scheduler kyber registered
[    0.204992] io scheduler bfq registered
[    0.227991] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.230677] msm_serial: driver initialized
[    0.235789] arm-smmu 15000000.iommu: probing hardware configuration...
[    0.235837] arm-smmu 15000000.iommu: SMMUv2 with:
[    0.235888] arm-smmu 15000000.iommu: 	stage 1 translation
[    0.235926] arm-smmu 15000000.iommu: 	non-coherent table walk
[    0.235950] arm-smmu 15000000.iommu: 	(IDR0.CTTW overridden by FW configuration)
[    0.235982] arm-smmu 15000000.iommu: 	stream matching with 79 register groups
[    0.236058] arm-smmu 15000000.iommu: 	61 context banks (0 stage-2 only)
[    0.237374] arm-smmu 15000000.iommu: 	Supported page sizes: 0x61311000
[    0.237416] arm-smmu 15000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
[    0.237708] arm-smmu 15000000.iommu: 	preserved 0 boot mappings
[    0.255815] brd: module loaded
[    0.262369] loop: module loaded
[    0.263329] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
[    0.272631] tun: Universal TUN/TAP device driver, 1.6
[    0.272956] thunder_xcv, ver 1.0
[    0.272989] thunder_bgx, ver 1.0
[    0.273017] nicpf, ver 1.0
[    0.273047] e1000: Intel(R) PRO/1000 Network Driver
[    0.273056] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.273088] e1000e: Intel(R) PRO/1000 Network Driver
[    0.273094] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.273244] sky2: driver version 1.30
[    0.273689] VFIO - User Level meta-driver version: 0.3
[    0.274845] usbcore: registered new interface driver usb-storage
[    0.275784] i2c_dev: i2c /dev entries driver
[    0.277560] input: pm8941_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:pwrkey/input/input0
[    0.279013] input: pm8941_resin as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:resin/input/input1
[    0.293349] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    0.296244] sdhci: Secure Digital Host Controller Interface driver
[    0.296258] sdhci: Copyright(c) Pierre Ossman
[    0.296286] Synopsys Designware Multimedia Card Interface Driver
[    0.296450] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.298186] ledtrig-cpu: registered to indicate activity on CPUs
[    0.298965] hid: raw HID events driver (C) Jiri Kosina
[    0.302781] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.308813] NET: Registered PF_PACKET protocol family
[    0.308923] Key type dns_resolver registered
[    0.320500] registered taskstats version 1
[    0.320756] Loading compiled-in X.509 certificates
[    0.338961] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps5
[    0.339028] platform 18200000.rsc:regulators-0: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-0/smps4
[    0.339434] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/bob
[    0.339447] platform 18200000.rsc:regulators-1: Fixed dependency cycle(s) with /soc@0/rsc@18200000/regulators-1/smps8
[    0.340121] smps1: Setting 1000000-1200000uV
[    0.340360] smps8: Setting 1120000-1408000uV
[    0.340506] ldo1: Setting 1616000-1984000uV
[    0.340873] ldo2: Setting 1200000-1352000uV
[    0.341055] ldo3: Setting 1144000-1256000uV
[    0.341241] ldo4: Setting 1648000-2950000uV
[    0.341576] ldo5: Setting 1648000-2950000uV
[    0.341904] ldo6: Setting 1648000-3100000uV
[    0.342233] ldo7: Setting 3000000-3312000uV
[    0.342568] ldo8: Setting 1800000-1900000uV
[    0.342933] ldo9: Setting 2950000-3100000uV
[    0.343275] ldo10: Setting 3200000-3312000uV
[    0.343477] ldo11: Setting 2950000-3400000uV
[    0.343823] bob: Setting 3296000-3960000uV
[    0.347857] gpi 800000.dma-controller: Adding to iommu group 0
[    0.348790] gpi a00000.dma-controller: Adding to iommu group 1
[    0.359612] geni_se_qup 8c0000.geniqup: Adding to iommu group 2
[    0.361855] geni_se_qup ac0000.geniqup: Adding to iommu group 3
[    0.377933] smps4: Setting 824000-1120000uV
[    0.378128] smps5: Setting 1744000-2040000uV
[    0.378279] ldo1: Setting 1096000-1304000uV
[    0.378463] ldo2: Setting 944000-1056000uV
[    0.378655] ldo3: Setting 968000-1064000uV
[    0.378836] ldo4: Setting 824000-920000uV
[    0.379016] ldo5: Setting 2600000-2800000uV
[    0.379141] cpu cpu0: EM: created perf domain
[    0.379473] ldo6: Setting 1096000-1304000uV
[    0.380065] ldo9: Setting 624000-760000uV
[    0.380500] ldo10: Setting 1720000-1832000uV
[    0.380987] ldo11: Setting 1696000-1984000uV
[    0.381598] ldo12: Setting 1696000-1952000uV
[    0.382144] ldo13: Setting 1696000-1904000uV
[    0.382455] ldo14: Setting 1720000-1856000uV
[    0.382625] ldo15: Setting 1696000-1904000uV
[    0.382934] ldo16: Setting 1800000-1800000uV
[    0.383262] ldo17: Setting 3000000-3232000uV
[    0.383652] cpu cpu6: EM: created perf domain
[    0.383655] ldo18: Setting 3000000-3000000uV
[    0.383994] ldo19: Setting 2944000-3304000uV
[    0.388055] qcom-qusb2-phy 88e2000.phy: Registered Qcom-QUSB2 phy
[    0.389012] 88c000.serial: ttyHS0 at MMIO 0x88c000 (irq = 123, base_baud = 0) is a MSM
[    0.389407] serial serial0: tty port ttyHS0 registered
[    0.390846] a88000.serial: ttyMSM0 at MMIO 0xa88000 (irq = 125, base_baud = 0) is a MSM
[    0.391951] arm-smmu 5040000.iommu: probing hardware configuration...
[    0.391976] arm-smmu 5040000.iommu: SMMUv2 with:
[    0.392006] arm-smmu 5040000.iommu: 	stage 1 translation
[    0.392016] arm-smmu 5040000.iommu: 	address translation ops
[    0.392026] arm-smmu 5040000.iommu: 	non-coherent table walk
[    0.392036] arm-smmu 5040000.iommu: 	(IDR0.CTTW overridden by FW configuration)
[    0.392048] arm-smmu 5040000.iommu: 	stream matching with 5 register groups
[    0.392074] arm-smmu 5040000.iommu: 	5 context banks (0 stage-2 only)
[    0.392097] arm-smmu 5040000.iommu: 	Supported page sizes: 0x63315000
[    0.392108] arm-smmu 5040000.iommu: 	Stage-1: 48-bit VA -> 36-bit IPA
[    0.392330] arm-smmu 5040000.iommu: 	preserved 0 boot mappings
[    0.393720] msm-mdss ae00000.display-subsystem: Adding to iommu group 4
[    0.393861] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c8c9400, fsynr=0x140020, cbfrsynra=0xc40, cb=4
[    0.393892] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c8d7f00, fsynr=0x140020, cbfrsynra=0xc40, cb=4
[    0.393916] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c8dfc00, fsynr=0x140020, cbfrsynra=0xc40, cb=4
[    0.393941] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c8e8000, fsynr=0x140020, cbfrsynra=0x800, cb=4
[    0.393965] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c8ef600, fsynr=0x140020, cbfrsynra=0xc40, cb=4
[    0.393990] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c8f7300, fsynr=0x140020, cbfrsynra=0x800, cb=4
[    0.394013] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c8fef00, fsynr=0x140020, cbfrsynra=0xc40, cb=4
[    0.394037] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c906200, fsynr=0x140020, cbfrsynra=0x800, cb=4
[    0.394061] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c90e000, fsynr=0x140020, cbfrsynra=0x800, cb=4
[    0.394086] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9c915600, fsynr=0x140020, cbfrsynra=0xc40, cb=4
[    0.395731] platform ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/panel@0/port/endpoint
[    0.395749] platform ae94000.dsi: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/display-controller@ae01000/ports/port@0/endpoint
[    0.403668] dwc3 a600000.usb: Adding to iommu group 5
[    0.409428] ufshcd-qcom 1d84000.ufshc: Adding to iommu group 6
[    0.410407] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[    0.410496] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[    0.412295] scsi host0: ufshcd
[    0.421542] sdhci_msm 8804000.mmc: Adding to iommu group 7
[    0.421875] sdhci_msm 8804000.mmc: Got CD GPIO
[    0.423534] adreno 5000000.gpu: Adding to iommu group 8
[    0.425772] msm_dsi ae94000.dsi: supply refgen not found, using dummy regulator
[    0.426335] mipi-dsi ae94000.dsi.0: Fixed dependency cycle(s) with /soc@0/display-subsystem@ae00000/dsi@ae94000/ports/port@1/endpoint
[    0.426854] msm_dpu ae01000.display-controller: bound ae94000.dsi (ops dsi_ops)
[    0.427629] adreno 5000000.gpu: supply vdd not found, using dummy regulator
[    0.427722] adreno 5000000.gpu: supply vddcx not found, using dummy regulator
[    0.430678] platform 506a000.gmu: Adding to iommu group 9
[    0.431693] msm_dpu ae01000.display-controller: bound 5000000.gpu (ops a3xx_ops)
[    0.433279] [drm:dpu_kms_hw_init:1075] dpu hardware revision:0x50020000
[    0.434896] [drm] Initialized msm 1.10.0 20130625 for ae01000.display-controller on minor 0
[    0.435035] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a630_sqe.fw from new location
[    0.435103] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a630_gmu.bin from new location
[    0.438319] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a615_zap.mbn from new location
[    0.455121] adreno 5000000.gpu: error -22 initializing firmware qcom/a615_zap.mbn
[    0.455163] msm_dpu ae01000.display-controller: [drm:adreno_load_gpu] *ERROR* gpu hw init failed: -22
[    0.456107] mmc2: SDHCI controller on 8804000.mmc [8804000.mmc] using ADMA 64-bit
[    0.522681] scsi 0:0:0:49488: Well-known LUN    MICRON   MT128GASAO4U21   0605 PQ: 0 ANSI: 6
[    0.527799] scsi 0:0:0:49476: Well-known LUN    MICRON   MT128GASAO4U21   0605 PQ: 0 ANSI: 6
[    0.532388] scsi 0:0:0:49456: Well-known LUN    MICRON   MT128GASAO4U21   0605 PQ: 0 ANSI: 6
[    0.534354] scsi 0:0:0:0: Direct-Access     MICRON   MT128GASAO4U21   0605 PQ: 0 ANSI: 6
[    0.537529] scsi 0:0:0:1: Direct-Access     MICRON   MT128GASAO4U21   0605 PQ: 0 ANSI: 6
[    0.540655] scsi 0:0:0:2: Direct-Access     MICRON   MT128GASAO4U21   0605 PQ: 0 ANSI: 6
[    0.543664] scsi 0:0:0:3: Direct-Access     MICRON   MT128GASAO4U21   0605 PQ: 0 ANSI: 6
[    0.546593] scsi 0:0:0:4: Direct-Access     MICRON   MT128GASAO4U21   0605 PQ: 0 ANSI: 6
[    0.549511] scsi 0:0:0:5: Direct-Access     MICRON   MT128GASAO4U21   0605 PQ: 0 ANSI: 6
[    0.553191] sd 0:0:0:0: [sda] 30922752 4096-byte logical blocks: (127 GB/118 GiB)
[    0.553424] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
[    0.553464] sd 0:0:0:1: [sdb] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
[    0.553495] sd 0:0:0:0: [sda] Write Protect is off
[    0.553496] sd 0:0:0:2: [sdc] Write Protect is off
[    0.553501] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
[    0.553501] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
[    0.553555] sd 0:0:0:1: [sdb] Write Protect is off
[    0.553560] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
[    0.553686] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    0.553694] sd 0:0:0:2: [sdc] Preferred minimum I/O size 131072 bytes
[    0.553699] sd 0:0:0:2: [sdc] Optimal transfer size 131072 bytes
[    0.553775] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    0.553782] sd 0:0:0:0: [sda] Preferred minimum I/O size 131072 bytes
[    0.553786] sd 0:0:0:0: [sda] Optimal transfer size 131072 bytes
[    0.553926] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    0.553941] sd 0:0:0:1: [sdb] Preferred minimum I/O size 131072 bytes
[    0.553952] sd 0:0:0:1: [sdb] Optimal transfer size 131072 bytes
[    0.553985] sd 0:0:0:3: [sdd] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
[    0.554276] sd 0:0:0:3: [sdd] Write Protect is off
[    0.554283] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
[    0.554931] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    0.554941] sd 0:0:0:3: [sdd] Preferred minimum I/O size 131072 bytes
[    0.554946] sd 0:0:0:3: [sdd] Optimal transfer size 131072 bytes
[    0.554948] sd 0:0:0:4: [sde] 262144 4096-byte logical blocks: (1.07 GB/1.00 GiB)
[    0.555039] sd 0:0:0:4: [sde] Write Protect is off
[    0.555043] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
[    0.555201] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    0.555207] sd 0:0:0:4: [sde] Preferred minimum I/O size 131072 bytes
[    0.555210] sd 0:0:0:4: [sde] Optimal transfer size 131072 bytes
[    0.556834] sd 0:0:0:5: [sdf] 40960 4096-byte logical blocks: (168 MB/160 MiB)
[    0.557085] sd 0:0:0:5: [sdf] Write Protect is off
[    0.557092] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
[    0.557794] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    0.557806] sd 0:0:0:5: [sdf] Preferred minimum I/O size 131072 bytes
[    0.557812] sd 0:0:0:5: [sdf] Optimal transfer size 131072 bytes
[    0.557992]  sdc: sdc1 sdc2
[    0.558498] sd 0:0:0:2: [sdc] Attached SCSI disk
[    0.559327]  sdb: sdb1 sdb2
[    0.559554] sd 0:0:0:1: [sdb] Attached SCSI disk
[    0.559930]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34
[    0.560197]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52
[    0.560884]  sdd: sdd1 sdd2 sdd3 sdd4 sdd5
[    0.561868]  sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8
[    0.562103] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.562116] sd 0:0:0:4: [sde] Attached SCSI disk
[    0.562626] sd 0:0:0:3: [sdd] Attached SCSI disk
[    0.564038] sd 0:0:0:5: [sdf] Attached SCSI disk
[    0.564586] mmc2: new ultra high speed SDR104 SDHC card at address 1234
[    0.565132] mmcblk2: mmc2:1234 SA16G 14.5 GiB
[    0.566383]  mmcblk2: p1 p2
[    0.710797] Console: switching to colour frame buffer device 135x150
[    0.816959] msm_dpu ae01000.display-controller: [drm] fb0: msmdrmfb frame buffer device
[    0.819032] input: gpio-keys as /devices/platform/gpio-keys/input/input2
[    0.819872] clk: Disabling unused clocks
[    0.820418] ALSA device list:
[    0.820425]   No soundcards found.
[    0.821298] Freeing unused kernel memory: 2752K
[    0.832376] Run /init as init process
[    0.832383]   with arguments:
[    0.832384]     /init
[    0.832385]     PMOS_NOSPLASH
[    0.832387]   with environment:
[    0.832388]     HOME=/
[    0.832389]     TERM=linux
[    8.797472] configfs-gadget.g1 gadget.0: HOST MAC 7e:a6:38:55:54:90
[    8.797491] configfs-gadget.g1 gadget.0: MAC 66:a9:e5:45:23:f1
[   12.479239] EXT4-fs (mmcblk2p1): mounting ext2 file system using the ext4 subsystem
[   12.481040] EXT4-fs (mmcblk2p1): mounted filesystem d4c3080b-882b-4bef-8bbf-84a6820a0cac ro without journal. Quota mode: none.
[   17.001694] EXT4-fs (mmcblk2p2): orphan cleanup on readonly fs
[   17.003346] EXT4-fs (mmcblk2p2): mounted filesystem afb3dd5e-3483-4ac6-a5b2-f357ff44040d ro with ordered data mode. Quota mode: none.
[   17.013374] EXT4-fs (mmcblk2p1): unmounting filesystem d4c3080b-882b-4bef-8bbf-84a6820a0cac.
[   18.626947] EXT4-fs (mmcblk2p1): mounting ext2 file system using the ext4 subsystem
[   18.742389] EXT4-fs (mmcblk2p1): mounted filesystem d4c3080b-882b-4bef-8bbf-84a6820a0cac r/w without journal. Quota mode: none.
[   18.912095] qnoc-sm7150 1500000.interconnect: sync_state() pending due to 1e40000.ipa
[   18.912243] qnoc-sm7150 1620000.interconnect: sync_state() pending due to 1e40000.ipa
[   18.912344] qnoc-sm7150 1380000.interconnect: sync_state() pending due to 1e40000.ipa
[   18.912444] qnoc-sm7150 1700000.interconnect: sync_state() pending due to 1e40000.ipa
[   18.912551] qnoc-sm7150 1380000.interconnect: sync_state() pending due to 90cd000.pmu
[   18.912654] qnoc-sm7150 9680000.interconnect: sync_state() pending due to 90b6300.pmu
[   18.912755] qnoc-sm7150 9680000.interconnect: sync_state() pending due to 1e40000.ipa
[   18.912879] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to 4080000.remoteproc
[   18.912995] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to 8300000.remoteproc
[   18.913108] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to 62400000.remoteproc
[   18.913232] qnoc-sm7150 1380000.interconnect: sync_state() pending due to 888000.i2c
[   18.913330] qnoc-sm7150 9680000.interconnect: sync_state() pending due to 888000.i2c
[   18.913427] qnoc-sm7150 1500000.interconnect: sync_state() pending due to 888000.i2c
[   18.913527] qnoc-sm7150 16e0000.interconnect: sync_state() pending due to 888000.i2c
[   18.913625] qcom-rpmhpd 18200000.rsc:power-controller: sync_state() pending due to 888000.i2c
[   20.806748] udevd[4409]: starting version 3.2.14
[   20.905735] udevd[4409]: starting eudev-3.2.14
[   21.023135] ipa 1e40000.ipa: Adding to iommu group 10
[   21.024184] ipa 1e40000.ipa: IPA driver initialized
[   21.047694] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   21.057541] ipa 1e40000.ipa: Direct firmware load for qcom/sm7150/courbet/ipa_fws.mbn failed with error -2
[   21.057553] ipa 1e40000.ipa: error -2 requesting "qcom/sm7150/courbet/ipa_fws.mbn"
[   21.083613] ipa: probe of 1e40000.ipa failed with error -2
[   21.087328] Bluetooth: Core ver 2.22
[   21.087405] NET: Registered PF_BLUETOOTH protocol family
[   21.087409] Bluetooth: HCI device and connection manager initialized
[   21.087423] Bluetooth: HCI socket layer initialized
[   21.087428] Bluetooth: L2CAP socket layer initialized
[   21.087438] Bluetooth: SCO socket layer initialized
[   21.104261] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   21.104786] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   21.110582] NET: Registered PF_QIPCRTR protocol family
[   21.111108] remoteproc remoteproc0: 62400000.remoteproc is available
[   21.113013] remoteproc remoteproc1: 8300000.remoteproc is available
[   21.118485] remoteproc remoteproc2: 4080000.remoteproc is available
[   21.144118] nfc: nfc_init: NFC Core ver 0.1
[   21.144203] NET: Registered PF_NFC protocol family
[   21.174030] Bluetooth: HCI UART driver ver 2.3
[   21.174050] Bluetooth: HCI UART protocol H4 registered
[   21.174128] Bluetooth: HCI UART protocol LL registered
[   21.174321] Bluetooth: HCI UART protocol Broadcom registered
[   21.174365] Bluetooth: HCI UART protocol QCA registered
[   21.174706] Bluetooth: HCI UART protocol Marvell registered
[   21.222533] remoteproc remoteproc1: powering up 8300000.remoteproc
[   21.222557] remoteproc remoteproc1: Booting fw image qcom/sm7150/courbet/cdsp.mbn, size 2922004
[   21.238038] Bluetooth: hci0: setting up wcn399x
[   21.294126] remoteproc remoteproc1: remote processor 8300000.remoteproc is now up
[   21.341226] ath10k_snoc 18800000.wifi: Adding to iommu group 11
[   21.420213] qcom,fastrpc 8300000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
[   21.421348] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@1: Adding to iommu group 12
[   21.422067] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@2: Adding to iommu group 13
[   21.422823] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 14
[   21.423543] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 15
[   21.424284] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 16
[   21.425083] qcom,fastrpc-cb 8300000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 17
[   21.464309] remoteproc remoteproc0: powering up 62400000.remoteproc
[   21.464319] remoteproc remoteproc0: Booting fw image qcom/sm7150/courbet/adsp.mbn, size 19308740
[   21.593688] remoteproc remoteproc0: remote processor 62400000.remoteproc is now up
[   21.601132] Bluetooth: hci0: QCA Product ID   :0x0000000a
[   21.601142] Bluetooth: hci0: QCA SOC Version  :0x40020140
[   21.601144] Bluetooth: hci0: QCA ROM Version  :0x00000201
[   21.601146] Bluetooth: hci0: QCA Patch Version:0x00000001
[   21.602460] qcom,fastrpc 62400000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
[   21.603386] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 18
[   21.604379] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 19
[   21.605355] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 20
[   21.606150] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 21
[   21.607473] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 22
[   21.611657] Bluetooth: hci0: QCA controller version 0x01400201
[   21.611668] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
[   21.622137] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 23
[   21.635993] fuse: init (API version 7.39)
[   21.681568] NET: Registered PF_INET6 protocol family
[   21.683346] Segment Routing with IPv6
[   21.683368] In-situ OAM (IOAM) with IPv6
[   22.009871] EXT4-fs (mmcblk2p2): re-mounted afb3dd5e-3483-4ac6-a5b2-f357ff44040d r/w. Quota mode: none.
[   22.043756] EXT4-fs (mmcblk2p2): re-mounted afb3dd5e-3483-4ac6-a5b2-f357ff44040d r/w. Quota mode: none.
[   22.237255] EXT4-fs (mmcblk2p1): re-mounted d4c3080b-882b-4bef-8bbf-84a6820a0cac r/w. Quota mode: none.
[   22.439739] Bluetooth: hci0: QCA Downloading qca/crnv21.bin
[   22.475614] Bluetooth: hci0: QCA setup on UART is completed
[   22.972859] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3
[   22.973012] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4
[   22.973078] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7
[   22.973137] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8
[   23.016348] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 24
[   23.016561] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: No dais found in DT
[   23.016569] q6asm-dai: probe of 62400000.remoteproc:glink-edge:apr:service@7:dais failed with error -22
[   23.044452] remoteproc remoteproc2: powering up 4080000.remoteproc
[   23.974361] remoteproc remoteproc2: Booting fw image qcom/sm7150/courbet/modem.mbn, size 62296272
[   24.067210] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.067228] Bluetooth: BNEP filters: protocol multicast
[   24.067242] Bluetooth: BNEP socket layer initialized
[   24.075209] Bluetooth: MGMT ver 1.22
[   24.092954] NET: Registered PF_ALG protocol family
[   24.325156] remoteproc remoteproc2: remote processor 4080000.remoteproc is now up
[   26.168842] Bluetooth: hci0: setting up wcn399x
[   26.308628] Bluetooth: hci0: QCA Product ID   :0x0000000a
[   26.308650] Bluetooth: hci0: QCA SOC Version  :0x40020140
[   26.308654] Bluetooth: hci0: QCA ROM Version  :0x00000201
[   26.308658] Bluetooth: hci0: QCA Patch Version:0x00000001
[   26.320861] Bluetooth: hci0: QCA controller version 0x01400201
[   26.320887] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
[   26.629002] ath10k_snoc 18800000.wifi: qmi chip_id 0x140 chip_family 0x4002 board_id 0xff soc_id 0x40090000
[   26.629025] ath10k_snoc 18800000.wifi: qmi fw_version 0x301a80a5 fw_build_timestamp 2023-02-21 00:43 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.0.1.c3-00165-QCAHLSWMTPLZ-1
[   27.123321] Bluetooth: hci0: QCA Downloading qca/crnv21.bin
[   27.152010] Bluetooth: hci0: QCA setup on UART is completed
[   31.454678] ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
[   31.454704] ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[   31.454715] ath10k_snoc 18800000.wifi: firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
[   31.487606] ath10k_snoc 18800000.wifi: htt-ver 3.61 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
[   31.581259] ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
[   31.581623] ath: EEPROM regdomain: 0x406c
[   31.581645] ath: EEPROM indicates we should expect a direct regpair map
[   31.581669] ath: Country alpha2 being used: 00
[   31.581685] ath: Regpair used: 0x6c
[   35.687990] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   37.676368] zram: Added device: zram0
[   37.776171] zram0: detected capacity change from 0 to 5672960
[   37.835164] Adding 2836476k swap on /dev/zram0.  Priority:16383 extents:1 across:2836476k SSDsc
[   38.609996] msm_dpu ae01000.display-controller: [drm:adreno_request_fw] loaded qcom/a615_zap.mbn from new location
[   39.653689] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   40.844895] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   44.744739] Bluetooth: RFCOMM TTY layer initialized
[   44.744766] Bluetooth: RFCOMM socket layer initialized
[   44.744779] Bluetooth: RFCOMM ver 1.11
[   44.808992] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   45.946942] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   49.911334] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   52.904685] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   56.868721] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   61.656810] qcom_q6v5_pas 62400000.remoteproc: fatal error received: err_qdi.c:1040:EF:sensor_process:0x1:TMR_CLNT_1:0xe3:dog_virtual_user.c:240:USER-PD DOG detects stalled initialization, triage with IMAGE OWNER
[   61.656943] remoteproc remoteproc0: crash detected in 62400000.remoteproc: type fatal error
[   61.657786] remoteproc remoteproc0: handling crash #1 in 62400000.remoteproc
[   61.657799] remoteproc remoteproc0: recovering 62400000.remoteproc
[   61.788742] remoteproc remoteproc0: stopped remote processor 62400000.remoteproc
[   61.907767] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   61.951606] remoteproc remoteproc0: remote processor 62400000.remoteproc is now up
[   61.957036] qcom,fastrpc 62400000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
[   61.959116] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 18
[   61.963040] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 19
[   61.964612] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 20
[   61.966841] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 21
[   61.969115] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 22
[   61.970478] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 23
[   61.979422] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3
[   61.979655] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4
[   61.987600] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7
[   61.988998] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 24
[   61.990674] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: No dais found in DT
[   61.990691] q6asm-dai: probe of 62400000.remoteproc:glink-edge:apr:service@7:dais failed with error -22
[   61.991600] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8
[   65.873882] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   71.484593] rfkill: input handler disabled
[   75.906291] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   79.869291] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   94.906342] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[   98.871898] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[  102.012264] qcom_q6v5_pas 62400000.remoteproc: fatal error received: err_qdi.c:1040:EF:sensor_process:0x1:TMR_CLNT_1:0xe3:dog_virtual_user.c:240:USER-PD DOG detects stalled initialization, triage with IMAGE OWNER
[  102.012394] remoteproc remoteproc0: crash detected in 62400000.remoteproc: type fatal error
[  102.013242] remoteproc remoteproc0: handling crash #2 in 62400000.remoteproc
[  102.013256] remoteproc remoteproc0: recovering 62400000.remoteproc
[  102.180060] remoteproc remoteproc0: stopped remote processor 62400000.remoteproc
[  102.324375] remoteproc remoteproc0: remote processor 62400000.remoteproc is now up
[  102.329584] qcom,fastrpc 62400000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
[  102.332359] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 18
[  102.333839] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 19
[  102.335680] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 20
[  102.338129] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 21
[  102.341627] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 22
[  102.346931] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 23
[  102.351976] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3
[  102.352218] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4
[  102.354557] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7
[  102.355093] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 24
[  102.355228] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: No dais found in DT
[  102.355232] q6asm-dai: probe of 62400000.remoteproc:glink-edge:apr:service@7:dais failed with error -22
[  102.355271] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8
[  122.910483] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[  126.874786] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[  142.384881] qcom_q6v5_pas 62400000.remoteproc: fatal error received: err_qdi.c:1040:EF:sensor_process:0x1:TMR_CLNT_1:0xe3:dog_virtual_user.c:240:USER-PD DOG detects stalled initialization, triage with IMAGE OWNER
[  142.385013] remoteproc remoteproc0: crash detected in 62400000.remoteproc: type fatal error
[  142.385861] remoteproc remoteproc0: handling crash #3 in 62400000.remoteproc
[  142.385875] remoteproc remoteproc0: recovering 62400000.remoteproc
[  142.513703] remoteproc remoteproc0: stopped remote processor 62400000.remoteproc
[  142.677877] remoteproc remoteproc0: remote processor 62400000.remoteproc is now up
[  142.684494] qcom,fastrpc 62400000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
[  142.686551] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 18
[  142.688083] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 19
[  142.689915] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 20
[  142.691277] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 21
[  142.694697] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 22
[  142.700901] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 23
[  142.707691] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3
[  142.707864] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4
[  142.716366] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7
[  142.717349] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 24
[  142.717556] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: No dais found in DT
[  142.717563] q6asm-dai: probe of 62400000.remoteproc:glink-edge:apr:service@7:dais failed with error -22
[  142.717634] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8
[  164.941117] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[  168.905361] ath10k_snoc 18800000.wifi: chan info: invalid frequency 0 (idx 41 out of bounds)
[  182.739763] qcom_q6v5_pas 62400000.remoteproc: fatal error received: err_qdi.c:1040:EF:sensor_process:0x1:TMR_CLNT_1:0xe6:dog_virtual_user.c:240:USER-PD DOG detects stalled initialization, triage with IMAGE OWNER
[  182.739895] remoteproc remoteproc0: crash detected in 62400000.remoteproc: type fatal error
[  182.740736] remoteproc remoteproc0: handling crash #4 in 62400000.remoteproc
[  182.740749] remoteproc remoteproc0: recovering 62400000.remoteproc
[  182.904327] remoteproc remoteproc0: stopped remote processor 62400000.remoteproc
[  183.074519] remoteproc remoteproc0: remote processor 62400000.remoteproc is now up
[  183.080718] qcom,fastrpc 62400000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
[  183.083101] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 18
[  183.084519] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 19
[  183.086496] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 20
[  183.089773] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 21
[  183.092082] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 22
[  183.094367] qcom,fastrpc-cb 62400000.remoteproc:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 23
[  183.099367] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:3
[  183.099554] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:4
[  183.105146] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:7
[  183.106128] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 24
[  183.106335] q6asm-dai 62400000.remoteproc:glink-edge:apr:service@7:dais: No dais found in DT
[  183.106341] q6asm-dai: probe of 62400000.remoteproc:glink-edge:apr:service@7:dais failed with error -22
[  183.106411] qcom,apr 62400000.remoteproc:glink-edge.apr_audio_svc.-1.-1: Adding APR/GPR dev: aprsvc:service:4:8
[  188.931115] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  188.931138] Bluetooth: HIDP socket layer initialized
[  188.940014] hid-generic 0005:010F:107E.0001: unknown main item tag 0x0
[  188.940595] input: Phantom Guard Keyboard as /devices/platform/soc@0/8c0000.geniqup/88c000.serial/serial0/serial0-0/bluetooth/hci0/hci0:1/0005:010F:107E.0001/input/input3
[  188.940854] input: Phantom Guard Mouse as /devices/platform/soc@0/8c0000.geniqup/88c000.serial/serial0/serial0-0/bluetooth/hci0/hci0:1/0005:010F:107E.0001/input/input4
[  188.941348] hid-generic 0005:010F:107E.0001: input,hidraw0: BLUETOOTH HID v14.36 Keyboard [Phantom Guard] on 39:90:21:64:07:00
[  192.931874] panel-k9a-36-02-0a-mp-dsc ae94000.dsi.0: Failed to set display off: -22
[  192.931932] panel-k9a-36-02-0a-mp-dsc ae94000.dsi.0: Failed to un-initialize panel: -22
Leave a Comment