Untitled
unknown
plain_text
2 years ago
499 kB
13
Indexable
<6>[ 0.000000] [0: swapper: 0] Boot CPU: AArch64 Processor [517f803c]
<6>[ 0.000000] [0: swapper: 0] Machine: Samsung CROWNQLTE CHN PROJECT Rev10
<6>[ 0.000000] [0: swapper: 0] sec_hw_param:sec_hw_rev_setup() androidboot.revision c
<3>[ 0.000000] [0: swapper: 0] charging_mode() : 0x0(0)
<6>[ 0.000000] [0: swapper: 0] set_afc_mode: afc_mode is 0x00
<6>[ 0.000000] [0: swapper: 0] Reserved memory: created CMA memory pool at 0x00000000fd000000, size 32 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
<6>[ 0.000000] [0: swapper: 0] Reserved memory: created CMA memory pool at 0x00000000f4400000, size 140 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
<6>[ 0.000000] [0: swapper: 0] Reserved memory: created CMA memory pool at 0x00000000f3c00000, size 8 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node secure_sp_region, compatible id shared-dma-pool
<6>[ 0.000000] [0: swapper: 0] Reserved memory: created DMA memory pool at 0x00000000f3a00000, size 2 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node pil_mdata_buf_mem_region, compatible id shared-dma-pool
<6>[ 0.000000] [0: swapper: 0] Reserved memory: created CMA memory pool at 0x00000000f2800000, size 16 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
<6>[ 0.000000] [0: swapper: 0] Reserved memory: created CMA memory pool at 0x00000001fb000000, size 36 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000008dae9000, size 0 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node ipa_fw_region, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000008daf9000, size 0 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node ipa_gsi_region, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000008dafe000, size 0 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node gpu_region, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000008db00000, size 5 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node camera_region, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000008e000000, size 120 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node modem_region@8e000000, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000095800000, size 5 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node pil_video_region@95800000, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000095d00000, size 8 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node cdsp_regions@95d00000, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000096500000, size 2 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node pil_mba_region@0x96500000, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000096700000, size 16 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node pil_slpi_region, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000097700000, size 1 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node pil_spss_region, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000097800000, size 32 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node pil_adsp_region, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Reserved memory: created DMA memory pool at 0x0000000099c00000, size 32 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node qseecom_region, compatible id shared-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000009f800000, size 2 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node tima_region@9F800000, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000009fa00000, size 17 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node rkp_region@9FA00000, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x00000000a0b00000, size 1 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node ipa_fw_ld_region@a0b00000, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x00000000a1400000, size 4 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node sec_debug_low_region@0, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x00000000a1c00000, size 0 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node sec_debug_autocomment@0, compatible id removed-dma-pool
<6>[ 0.000000] [0: swapper: 0] Reserved memory: created CMA memory pool at 0x00000000c0000000, size 580 MiB
<6>[ 0.000000] [0: swapper: 0] OF: reserved mem: initialized node camera_mem_region, compatible id shared-dma-pool
<7>[ 0.000000] [0: swapper: 0] On node 0 totalpages: 1479016
<7>[ 0.000000] [0: swapper: 0] DMA zone: 6895 pages used for memmap
<7>[ 0.000000] [0: swapper: 0] DMA zone: 0 pages reserved
<7>[ 0.000000] [0: swapper: 0] DMA zone: 441256 pages, LIFO batch:31
<7>[ 0.000000] [0: swapper: 0] Normal zone: 16215 pages used for memmap
<7>[ 0.000000] [0: swapper: 0] Normal zone: 1037760 pages, LIFO batch:31
<6>[ 0.000000] [0: swapper: 0] psci: probing for conduit method from DT.
<6>[ 0.000000] [0: swapper: 0] psci: PSCIv1.0 detected in firmware.
<6>[ 0.000000] [0: swapper: 0] psci: Using standard PSCI v0.2 function IDs
<6>[ 0.000000] [0: swapper: 0] psci: MIGRATE_INFO_TYPE not supported.
<6>[ 0.000000] [0: swapper: 0] psci: SMC Calling Convention v1.0
<5>[ 0.000000] [0: swapper: 0] random: fast init done
<6>[ 0.000000] [0: swapper: 0] percpu: Embedded 24 pages/cpu @ffffffc17ac8c000 s57624 r8192 d32488 u98304
<7>[ 0.000000] [0: swapper: 0] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096
<7>[ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
<6>[ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1455906
<5>[ 0.000000] [0: swapper: 0] Kernel command line: rcupdate.rcu_expedited=1 console=null androidboot.hardware=qcom video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 service_locator.enable=1 swiotlb=20488 androidboot.selinux=permissive root=/dev/block/sda22 buildvariant=eng androidboot.bootdevice=1d84000.ufshc androidboot.serialno=0000000000000000 androidboot.baseband=sdm msm_drm.dsi_display0=ss_dsi_panel_S6E3HA8_AMB638RD01_WQHD: lcd_id=0x912047 androidboot.sec_atd.tty=/dev/ttyHS8 androidboot.revision=12 androidboot.ap_serial=0x00000000 ccic_info=1 fg_reset=0 batt_temp=365 sec_log=0x200000@0xA1600000 sec_dbg=0x1FF000@0xA1400000 sec_dbg_ex_info=0xFC0@0xA15FF000 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 softdog.soft_margin=100 softdog.soft_panic=1 watchdog_v2.ipi_en=1 androidboot.cp_reserved_mem=off androidboot.force_upload=0x0 androidboot.upload_offset=9438196 androidboot.boot_recovery=1 androidboot.carrierid.param.offset=9437644 androidboot.carrierid=KDI androidboot.sales.param.offset=9437648 androidboot.sales_code=KDI androidboot.prototype.param.offset=9437660 androidboot.verifiedbootstate=orange androidboot.warranty_bit=1 androidboot.wb.hs=A00 androidboot.wb.snapQB=27203482R androidboot.ucs_mode=0 androidboot.swp_config=0 androidboot.em.did=0000000000000000 androidboot.em.model=SCV40 androidboot.em.status=0x0 androidboot.sb.debug0=0x0 androidboot.bootloader=SCV40KDS1CVK1 charging_mode=0x00 afc_disable=0x00 androidboot.security_mode=1526595585 androidboot.kap.param.offset=100 androidboot.ddr_start_type=1 androidboot.dram_info=01,06,01,6G androidboot.usrf=9438192 sec_dqa=0818
<3>[ 0.000000] [0: swapper: 0] [SDE] get_lcd_attached : LCD_ID = 0x912047
<6>[ 0.000000] [0: swapper: 0] set_ccic_info: ccic_info: 0x0001
<6>[ 0.000000] [0: swapper: 0] sec_bat_get_fg_reset, fg_reset:0
<6>[ 0.000000] [0: swapper: 0] Boot batt_temp is 365
<6>[ 0.000000] [0: swapper: 0] sec_debug_sched_log:sec_dbg_setup: str=@0xA1400000
<6>[ 0.000000] [0: swapper: 0] sec_debug_sched_log:sec_dbg_setup: secdbg_paddr = 0xa1400000
<6>[ 0.000000] [0: swapper: 0] sec_debug_sched_log:sec_dbg_setup: secdbg_size = 0x1ff000
<6>[ 0.000000] [0: swapper: 0] sec_debug_user_reset:sec_debug_ex_info_setup() ex info phy=0xa15ff000, size=0x1000
<6>[ 0.000000] [0: swapper: 0] log_buf_len individual max cpu contribution: 131072 bytes
<6>[ 0.000000] [0: swapper: 0] log_buf_len total cpu_extra contributions: 917504 bytes
<6>[ 0.000000] [0: swapper: 0] log_buf_len min size: 524288 bytes
<6>[ 0.000000] [0: swapper: 0] log_buf_len: 2097152 bytes
<6>[ 0.000000] [0: swapper: 0] early log buf free: 513496(97%)
<6>[ 0.000000] [0: swapper: 0] PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 0.000000] [0: swapper: 0] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
<6>[ 0.000000] [0: swapper: 0] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>[ 0.000000] [0: swapper: 0] software IO TLB [mem 0xeffc0000-0xf2800000] (40MB) mapped at [ffffffc06ffc0000-ffffffc0727fffff]
<6>[ 0.000000] [0: swapper: 0] Memory: 4818008K/5916064K available (19966K kernel code, 3428K rwdata, 10968K rodata, 6144K init, 6774K bss, 860488K reserved, 237568K cma-reserved)
<5>[ 0.000000] [0: swapper: 0] Virtual kernel memory layout:
<5>[ 0.000000] [0: swapper: 0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
<5>[ 0.000000] [0: swapper: 0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
<5>[ 0.000000] [0: swapper: 0] .text : 0xffffff8008154000 - 0xffffff80094d4000 ( 19968 KB)
<5>[ 0.000000] [0: swapper: 0] .rodata : 0xffffff80094d4000 - 0xffffff800a0d4000 ( 12288 KB)
<5>[ 0.000000] [0: swapper: 0] .init : 0xffffff800a0d4000 - 0xffffff800a6d4000 ( 6144 KB)
<5>[ 0.000000] [0: swapper: 0] .data : 0xffffff800a6d4000 - 0xffffff800aa2d008 ( 3429 KB)
<5>[ 0.000000] [0: swapper: 0] .bss : 0xffffff800aa2d008 - 0xffffff800b0cabbc ( 6775 KB)
<5>[ 0.000000] [0: swapper: 0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
<5>[ 0.000000] [0: swapper: 0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
<5>[ 0.000000] [0: swapper: 0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
<5>[ 0.000000] [0: swapper: 0] 0xffffffbf00000000 - 0xffffffbf05f57000 ( 95 MB actual)
<5>[ 0.000000] [0: swapper: 0] memory : 0xffffffc000000000 - 0xffffffc17d5c0000 ( 6101 MB)
<6>[ 0.000000] [0: swapper: 0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.000000] [0: swapper/0: 0] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] [0: swapper/0: 0] RCU dyntick-idle grace-period acceleration is enabled.
<4>[ 0.000000] [0: swapper/0: 0]
<4>[ 0.000000] [0: swapper/0: 0] **********************************************************
<4>[ 0.000000] [0: swapper/0: 0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.000000] [0: swapper/0: 0] ** **
<4>[ 0.000000] [0: swapper/0: 0] ** trace_printk() being used. Allocating extra memory. **
<4>[ 0.000000] [0: swapper/0: 0] ** **
<4>[ 0.000000] [0: swapper/0: 0] ** This means that this is a DEBUG kernel and it is **
<4>[ 0.000000] [0: swapper/0: 0] ** unsafe for production use. **
<4>[ 0.000000] [0: swapper/0: 0] ** **
<4>[ 0.000000] [0: swapper/0: 0] ** If you see this message and you are not debugging **
<4>[ 0.000000] [0: swapper/0: 0] ** the kernel, report this immediately to your vendor! **
<4>[ 0.000000] [0: swapper/0: 0] ** **
<4>[ 0.000000] [0: swapper/0: 0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.000000] [0: swapper/0: 0] **********************************************************
<6>[ 0.000000] [0: swapper/0: 0] NR_IRQS:64 nr_irqs:64 0
<6>[ 0.000000] [0: swapper/0: 0] PDC SDM845 v2 initialized
<6>[ 0.000000] [0: swapper/0: 0] Offload RCU callbacks from all CPUs
<6>[ 0.000000] [0: swapper/0: 0] Offload RCU callbacks from CPUs: 0-7.
<6>[ 0.000000] [0: swapper/0: 0] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
<6>[ 0.000000] [0: swapper/0: 0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
<6>[ 0.000004] [0: swapper/0: 0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
<6>[ 0.000026] [0: swapper/0: 0] clocksource: Switched to clocksource arch_sys_counter
<6>[ 0.002519] [0: swapper/0: 0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
<6>[ 0.002542] [0: swapper/0: 0] pid_max: default: 32768 minimum: 301
<6>[ 0.002654] [0: swapper/0: 0] Security Framework initialized
<6>[ 0.002673] [0: swapper/0: 0] SELinux: Initializing.
<7>[ 0.002704] [0: swapper/0: 0] SELinux: Starting in permissive mode
<6>[ 0.002749] [0: swapper/0: 0] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.002758] [0: swapper/0: 0] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
<3>[ 0.003903] [0: swapper/0: 1] /cpus/cpu@0: Missing clock-frequency property
<3>[ 0.003922] [0: swapper/0: 1] /cpus/cpu@100: Missing clock-frequency property
<3>[ 0.003933] [0: swapper/0: 1] /cpus/cpu@200: Missing clock-frequency property
<3>[ 0.003942] [0: swapper/0: 1] /cpus/cpu@300: Missing clock-frequency property
<3>[ 0.003951] [0: swapper/0: 1] /cpus/cpu@400: Missing clock-frequency property
<3>[ 0.003960] [0: swapper/0: 1] /cpus/cpu@500: Missing clock-frequency property
<3>[ 0.003970] [0: swapper/0: 1] /cpus/cpu@600: Missing clock-frequency property
<3>[ 0.003980] [0: swapper/0: 1] /cpus/cpu@700: Missing clock-frequency property
<6>[ 0.004056] [0: swapper/0: 1] sched-energy: Sched-energy-costs installed from DT
<6>[ 0.004076] [0: swapper/0: 1] ASID allocator initialised with 32768 entries
<6>[ 0.020985] [0: swapper/0: 1] MSM Memory Dump base table set up
<6>[ 0.021012] [0: swapper/0: 1] MSM Memory Dump apps data table set up
<6>[ 0.030804] [1: swapper/1: 0] CPU1: Booted secondary processor [517f803c]
<6>[ 0.040222] [2: swapper/2: 0] CPU2: Booted secondary processor [517f803c]
<6>[ 0.049616] [3: swapper/3: 0] CPU3: Booted secondary processor [517f803c]
<6>[ 0.059634] [4: swapper/4: 0] CPU4: Booted secondary processor [516f802d]
<6>[ 0.069389] [5: swapper/5: 0] CPU5: Booted secondary processor [516f802d]
<6>[ 0.079417] [6: swapper/6: 0] CPU6: Booted secondary processor [516f802d]
<6>[ 0.089511] [7: swapper/7: 0] CPU7: Booted secondary processor [516f802d]
<6>[ 0.089687] [0: swapper/0: 1] Brought up 8 CPUs
<6>[ 0.089723] [0: swapper/0: 1] SMP: Total of 8 processors activated.
<6>[ 0.089732] [0: swapper/0: 1] CPU features: detected feature: GIC system register CPU interface
<6>[ 0.089736] [0: swapper/0: 1] CPU features: detected feature: Privileged Access Never
<6>[ 0.089742] [0: swapper/0: 1] CPU features: detected feature: User Access Override
<6>[ 0.089749] [0: swapper/0: 1] CPU features: detected feature: 32-bit EL0 Support
<6>[ 0.089756] [0: swapper/0: 1] CPU features: detected feature: Kernel page table isolation (KPTI)
<6>[ 0.273475] [0: swapper/0: 1] CPU: All CPU(s) started at EL1
<6>[ 0.273532] [0: migration/0: 13] alternatives: patching kernel code
<6>[ 0.352282] [1: swapper/0: 1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
<6>[ 0.352302] [1: swapper/0: 1] futex hash table entries: 2048 (order: 6, 262144 bytes)
<6>[ 0.371343] [1: swapper/0: 1] pinctrl core: initialized pinctrl subsystem
<6>[ 0.372120] [1: swapper/0: 1] NET: Registered protocol family 16
<6>[ 0.374197] [0: swapper/0: 1] schedtune: init normalization constants...
<6>[ 0.374213] [0: swapper/0: 1] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 17
<6>[ 0.374221] [0: swapper/0: 1] schedtune: CPU[0] min_pwr: 4 max_pwr: 160
<6>[ 0.374228] [0: swapper/0: 1] schedtune: CPU[1] min_pwr: 4 max_pwr: 160
<6>[ 0.374234] [0: swapper/0: 1] schedtune: CPU[2] min_pwr: 4 max_pwr: 160
<6>[ 0.374240] [0: swapper/0: 1] schedtune: CPU[3] min_pwr: 4 max_pwr: 160
<6>[ 0.374247] [0: swapper/0: 1] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 190
<6>[ 0.374254] [0: swapper/0: 1] schedtune: CPU[4] min_pwr: 40 max_pwr: 60000
<6>[ 0.374260] [0: swapper/0: 1] schedtune: CPU[5] min_pwr: 40 max_pwr: 60000
<6>[ 0.374267] [0: swapper/0: 1] schedtune: CPU[6] min_pwr: 40 max_pwr: 60000
<6>[ 0.374273] [0: swapper/0: 1] schedtune: CPU[7] min_pwr: 40 max_pwr: 60000
<6>[ 0.374279] [0: swapper/0: 1] schedtune: SYSTEM min_pwr: 178 max_pwr: 240847
<6>[ 0.374286] [0: swapper/0: 1] schedtune: using normalization constants mul: 383241808 sh1: 1 sh2: 17
<6>[ 0.374291] [0: swapper/0: 1] schedtune: verify normalization constants...
<6>[ 0.374298] [0: swapper/0: 1] schedtune: max_pwr/2^0: 240669 => norm_pwr: 1024
<6>[ 0.374304] [0: swapper/0: 1] schedtune: max_pwr/2^1: 120334 => norm_pwr: 511
<6>[ 0.374308] [0: swapper/0: 1] schedtune: max_pwr/2^2: 60167 => norm_pwr: 255
<6>[ 0.374313] [0: swapper/0: 1] schedtune: max_pwr/2^3: 30083 => norm_pwr: 127
<6>[ 0.374317] [0: swapper/0: 1] schedtune: max_pwr/2^4: 15041 => norm_pwr: 63
<6>[ 0.374321] [0: swapper/0: 1] schedtune: max_pwr/2^5: 7520 => norm_pwr: 31
<6>[ 0.374328] [0: swapper/0: 1] schedtune: configured to support 7 boost groups
<6>[ 0.376126] [1: swapper/0: 1] cpuidle: using governor menu
<6>[ 0.377334] [0: swapper/0: 1] cpuidle: using governor qcom
<6>[ 0.383240] [0: swapper/0: 1] vdso: 2 pages (1 code @ ffffff80094db000, 1 data @ ffffff800a6d8000)
<6>[ 0.383256] [0: swapper/0: 1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
<6>[ 0.384161] [1: swapper/0: 1] DMA: preallocated 2048 KiB pool for atomic allocations
<4>[ 0.384843] [1: swapper/0: 1] [HQM] sec_hqm_device_init
<6>[ 0.385100] [0: swapper/0: 1] exit: IPA_USB init success!
<6>[ 0.385619] [0: swapper/0: 1] pstore: using zlib compression
<6>[ 0.386447] [0: swapper/0: 1] console [pstore-1] enabled
<6>[ 0.386513] [0: swapper/0: 1] pstore: Registered ramoops as persistent store backend
<6>[ 0.386520] [0: swapper/0: 1] ramoops: attached 0x100000@0xa1300000, ecc: 0/0
<4>[ 0.389326] [0: swapper/0: 1] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
<4>[ 0.389420] [0: swapper/0: 1] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
<4>[ 0.389510] [0: swapper/0: 1] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
<4>[ 0.389764] [0: swapper/0: 1] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
<3>[ 0.391799] [0: swapper/0: 1] [rmem_dma_device_init] dev name : soc:pil_mdata_buf_dev
<6>[ 0.391814] [0: swapper/0: 1] platform soc:pil_mdata_buf_dev: assigned reserved memory node pil_mdata_buf_mem_region
<3>[ 0.394186] [0: swapper/0: 1] unable to find DT imem DLOAD mode node
<3>[ 0.396016] [0: swapper/0: 1] unable to find DT imem EDLOAD mode node
<3>[ 0.397041] [0: swapper/0: 1] set_dload_mode <1> ( ffffff8008dd6bc4 )
<6>[ 0.397538] [1: kworker/u16:1: 75] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
<6>[ 0.399689] [0: swapper/0: 1] platform 4080000.qcom,mss: assigned reserved memory node modem_region@8e000000
<6>[ 0.399798] [0: swapper/0: 1] platform 17300000.qcom,lpass: assigned reserved memory node pil_adsp_region
<6>[ 0.399922] [0: swapper/0: 1] platform 5c00000.qcom,ssc: assigned reserved memory node pil_slpi_region
<6>[ 0.400402] [0: swapper/0: 1] platform 188101c.qcom,spss: assigned reserved memory node pil_spss_region
<6>[ 0.400633] [0: swapper/0: 1] msm_watchdog 17980000.qcom,wdt: wdog absent resource not present
<6>[ 0.400657] [0: swapper/0: 1] msm_watchdog 17980000.qcom,wdt: No need to allocate memory for scandumps
<6>[ 0.402955] [1: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[0] PA:0x1f1eec000 @0xffffffc171eec000
<6>[ 0.402967] [1: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[1] PA:0x1f1eec800 @0xffffffc171eec800
<6>[ 0.402979] [1: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[2] PA:0x1f1eed000 @0xffffffc171eed000
<6>[ 0.402989] [1: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[3] PA:0x1f1eed800 @0xffffffc171eed800
<6>[ 0.403000] [1: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[4] PA:0x1f1eee000 @0xffffffc171eee000
<6>[ 0.403011] [1: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[5] PA:0x1f1eee800 @0xffffffc171eee800
<6>[ 0.403021] [1: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[6] PA:0x1f1eef000 @0xffffffc171eef000
<6>[ 0.403031] [1: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[7] PA:0x1f1eef800 @0xffffffc171eef800
<6>[ 0.403079] [1: swapper/0: 1] msm_watchdog 17980000.qcom,wdt: MSM Watchdog Initialized
<6>[ 0.403151] [1: swapper/0: 1] platform 8300000.qcom,turing: assigned reserved memory node cdsp_regions@95d00000
<6>[ 0.403397] [1: swapper/0: 1] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
<6>[ 0.403593] [1: swapper/0: 1] platform aae0000.qcom,venus: assigned reserved memory node pil_video_region@95800000
<3>[ 0.405473] [1: swapper/0: 1] <CORE> glink_mailbox_probe: unable to create log context for [spss:mailbox]
<6>[ 0.414427] [0: swapper/0: 1] sps:sps is ready.
<6>[ 0.415326] [0: swapper/0: 1] platform soc:qcom,ipa_fws: assigned reserved memory node ipa_fw_ld_region@a0b00000
<3>[ 0.420369] [0: swapper/0: 1] msm-dcc 10a2000.dcc_v2: DCC list passed 2
<6>[ 0.421070] [0: swapper/0: 1] msm-dcc 10a2000.dcc_v2: All values written to enable
<6>[ 0.421831] [0: swapper/0: 1] platform soc:mem_dump: assigned reserved memory node mem_dump_region
<6>[ 0.434678] [0: swapper/0: 1] pm8998_s9_level: supplied by pm8998_s6_level
<6>[ 0.434722] [0: swapper/0: 1] pm8998_s9_level: Bringing 1uV into 17-17uV
<6>[ 0.434857] [0: swapper/0: 1] pm8998_s9_level_ao: supplied by pm8998_s6_level_ao
<6>[ 0.434888] [0: swapper/0: 1] pm8998_s9_level_ao: Bringing 1uV into 17-17uV
<6>[ 0.443778] [0: swapper/0: 1] pm8998_l24: supplied by pm8998_l12
<6>[ 0.444120] [0: swapper/0: 1] pm8998_l25: Bringing 3000000uV into 3300000-3300000uV
<6>[ 0.445615] [0: swapper/0: 1] pm8998_lvs1: Bringing 1uV into 1800000-1800000uV
<6>[ 0.446011] [0: swapper/0: 1] pm8998_lvs2: Bringing 1uV into 1800000-1800000uV
<3>[ 0.459288] [0: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: invalid resource
<6>[ 0.468115] [0: swapper/0: 1] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region
<6>[ 0.472172] [0: swapper/0: 1] cpufreq_boot_limit_probe: It is for factory bin, skip it
<3>[ 0.472247] [0: swapper/0: 1] cpufreq_boot_limit_probe: skip thermal limit(-70)
<6>[ 0.473683] [0: swapper/0: 1] allocating 262144 bytes at ffffffc171a40000 (8078000000 physical) for avc log
<6>[ 0.473694] [0: swapper/0: 1] sec_avc_log_init: no old log found
<0>[ 0.474287] [0: swapper/0: 1] sec_debug:__sec_debug_dt_addr_init() restart_reason addr : 0xffffff800b5d965c(0x835d965c)
<0>[ 0.474574] [0: swapper/0: 1] sec_debug:__sec_debug_dt_addr_init() upload_cause addr : 0xffffff800b5db66c(0x835db66c)
<3>[ 0.474588] [0: swapper/0: 1] (sec_debug_set_upload_magic) 776655ee
<6>[ 0.474596] [0: swapper/0: 1] sec_debug:sec_debug_set_qc_dload_magic() on=1
<3>[ 0.474731] [0: swapper/0: 1] set_dload_mode <1> ( ffffff80090d4bdc )
<0>[ 0.474945] [0: swapper/0: 1] sec_debug:sec_debug_set_upload_cause() cafebabe
<6>[ 0.475126] [0: swapper/0: 1] sec_debug:create_ap_serial_node() create_ap_serial_node: Completed
<6>[ 0.475298] [0: swapper/0: 1] sec_crashkey:sec_debug_register_crash_key() keycrash registered.
<6>[ 0.475309] [0: swapper/0: 1] sec_crashkey:sec_debug_register_crash_key() tsp_dump registered.
<6>[ 0.475356] [0: swapper/0: 1] sec_debug_sched_log:sec_debug_sched_log_init: vaddr=0xffffff8010400000 paddr=0xa1400000 size=0x1ff000 sizeof(struct sec_debug_log)=0xe70d0
<6>[ 0.475564] [0: swapper/0: 1] sec_debug_sched_log:sec_debug_sched_log_init: init done
<6>[ 0.475603] [0: swapper/0: 1] sec_debug_user_reset:sec_debug_init_panic_extra_info() sec_debug_init_panic_extra_info: ex_info memory initialized size[3072]
<3>[ 0.486365] [0: swapper/0: 1] printk_remap_nocache: nocache_base printk virtual addrs 0xffffff8010600000 phy=0xa1600000
<6>[ 0.526832] [0: swapper/0: 1] printk_remap_nocache: saved old log at 27929@ffffffc171aa8000
<6>[ 0.537512] [1: swapper/0: 1] gpu_cx_gdsc: supplied by pm8998_s9_level
<6>[ 0.540488] [0: swapper/0: 1] clk: cam_cc_bps_clk_src: set OPP pair(19200000 Hz: 129 uV) on soc:qcom,bps
<6>[ 0.540822] [0: swapper/0: 1] clk: cam_cc_bps_clk_src: set OPP pair(600000000 Hz: 257 uV) on soc:qcom,bps
<6>[ 0.541064] [0: swapper/0: 1] clk: cam_cc_cci_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac4a000.qcom,cci
<6>[ 0.541291] [0: swapper/0: 1] clk: cam_cc_cci_clk_src: set OPP pair(100000000 Hz: 257 uV) on ac4a000.qcom,cci
<6>[ 0.541554] [0: swapper/0: 1] clk: cam_cc_csi0phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac65000.qcom,csiphy
<6>[ 0.541741] [0: swapper/0: 1] clk: cam_cc_csi0phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac65000.qcom,csiphy
<6>[ 0.541985] [0: swapper/0: 1] clk: cam_cc_csi1phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac66000.qcom,csiphy
<6>[ 0.542168] [0: swapper/0: 1] clk: cam_cc_csi1phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac66000.qcom,csiphy
<6>[ 0.542410] [0: swapper/0: 1] clk: cam_cc_csi2phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac67000.qcom,csiphy
<6>[ 0.542607] [0: swapper/0: 1] clk: cam_cc_csi2phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac67000.qcom,csiphy
<6>[ 0.542869] [0: swapper/0: 1] clk: cam_cc_csi3phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac68000.qcom,csiphy
<6>[ 0.543057] [0: swapper/0: 1] clk: cam_cc_csi3phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac68000.qcom,csiphy
<6>[ 0.543612] [0: swapper/0: 1] clk: cam_cc_icp_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac00000.qcom,a5
<6>[ 0.543894] [0: swapper/0: 1] clk: cam_cc_icp_clk_src: set OPP pair(600000000 Hz: 193 uV) on ac00000.qcom,a5
<6>[ 0.544273] [0: swapper/0: 1] clk: cam_cc_ife_0_clk_src: set OPP pair(19200000 Hz: 129 uV) on acaf000.qcom,vfe0
<6>[ 0.544597] [0: swapper/0: 1] clk: cam_cc_ife_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on acaf000.qcom,vfe0
<6>[ 0.544932] [0: swapper/0: 1] clk: cam_cc_ife_0_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acb3000.qcom,csid0
<6>[ 0.545168] [0: swapper/0: 1] clk: cam_cc_ife_0_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acb3000.qcom,csid0
<6>[ 0.545565] [0: swapper/0: 1] clk: cam_cc_ife_1_clk_src: set OPP pair(19200000 Hz: 129 uV) on acb6000.qcom,vfe1
<6>[ 0.545901] [0: swapper/0: 1] clk: cam_cc_ife_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on acb6000.qcom,vfe1
<6>[ 0.546261] [0: swapper/0: 1] clk: cam_cc_ife_1_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acba000.qcom,csid1
<6>[ 0.546487] [0: swapper/0: 1] clk: cam_cc_ife_1_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acba000.qcom,csid1
<6>[ 0.546855] [0: swapper/0: 1] clk: cam_cc_ife_lite_clk_src: set OPP pair(19200000 Hz: 129 uV) on acc4000.qcom,vfe-lite
<6>[ 0.547174] [0: swapper/0: 1] clk: cam_cc_ife_lite_clk_src: set OPP pair(600000000 Hz: 257 uV) on acc4000.qcom,vfe-lite
<6>[ 0.547564] [0: swapper/0: 1] clk: cam_cc_ife_lite_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acc8000.qcom,csid-lite
<6>[ 0.547795] [0: swapper/0: 1] clk: cam_cc_ife_lite_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acc8000.qcom,csid-lite
<6>[ 0.548329] [0: swapper/0: 1] clk: cam_cc_ipe_0_clk_src: set OPP pair(19200000 Hz: 129 uV) on soc:qcom,ipe0
<6>[ 0.548696] [0: swapper/0: 1] clk: cam_cc_ipe_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on soc:qcom,ipe0
<6>[ 0.549265] [0: swapper/0: 1] clk: cam_cc_ipe_1_clk_src: set OPP pair(19200000 Hz: 129 uV) on soc:qcom,ipe1
<6>[ 0.549624] [0: swapper/0: 1] clk: cam_cc_ipe_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on soc:qcom,ipe1
<6>[ 0.552561] [0: swapper/0: 1] cam_cc-sdm845 ad00000.qcom,camcc: Registered Camera CC clocks
<6>[ 0.553724] [0: swapper/0: 1] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP
<6>[ 0.554728] [0: swapper/0: 1] clk-rpmh soc:qcom,rpmhclk: Registered RPMh clocks
<6>[ 0.556490] [0: swapper/0: 1] disp_cc-sdm845 af00000.qcom,dispcc: Registered Display CC clocks
<6>[ 0.576288] [0: swapper/0: 1] gcc-sdm845 100000.qcom,gcc: Registered GCC clocks
<6>[ 0.577805] [0: swapper/0: 1] clk: gpu_cc_gmu_clk_src: set OPP pair(19200000 Hz: 49 uV) on 506a000.qcom,gmu
<6>[ 0.577996] [0: swapper/0: 1] clk: gpu_cc_gmu_clk_src: set OPP pair(500000000 Hz: 129 uV) on 506a000.qcom,gmu
<6>[ 0.578297] [0: swapper/0: 1] gpu_cc-sdm845 5090000.qcom,gpucc: Registered GPU CC clocks
<6>[ 0.579228] [0: swapper/0: 1] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(180000000 Hz: 49 uV) on 5000000.qcom,kgsl-3d0
<6>[ 0.579633] [0: swapper/0: 1] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(710000000 Hz: 417 uV) on 5000000.qcom,kgsl-3d0
<6>[ 0.579783] [0: swapper/0: 1] gfxcc-sdm845 5090000.qcom,gfxcc: Registered GFX CC clocks
<6>[ 0.581026] [0: swapper/0: 1] video_cc-sdm845 ab00000.qcom,videocc: Registered Video CC clocks
<6>[ 0.585843] [0: swapper/0: 1] KPI: Linux loader start count = 71117
<6>[ 0.585909] [0: swapper/0: 1] KPI: Kernel start count = 119764
<6>[ 0.585968] [0: swapper/0: 1] KPI: Bootloader load kernel count = 2451
<6>[ 0.586033] [0: swapper/0: 1] KPI: Kernel MPM timestamp = 148383
<6>[ 0.586092] [0: swapper/0: 1] KPI: Kernel MPM Clock frequency = 32768
<3>[ 0.586162] [0: swapper/0: 1] msm_bus_fabric_rpmh_init_driver
<3>[ 0.586440] [0: swapper/0: 1] msm_bus: Probe started
<4>[ 0.587133] [0: swapper/0: 1] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
<4>[ 0.587252] [0: swapper/0: 1] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
<4>[ 0.587338] [0: swapper/0: 1] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
<4>[ 0.587455] [0: swapper/0: 1] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
<3>[ 0.589622] [0: swapper/0: 1] msm_bus: DT Parsing complete
<3>[ 0.593070] [0: swapper/0: 1] msm_bus_fab_init_noc_ops: Invalid Bus type
<3>[ 0.593315] [0: swapper/0: 1] msm_bus_fab_init_noc_ops: Invalid Bus type
<3>[ 0.593416] [0: swapper/0: 1] msm_bus_fab_init_noc_ops: Invalid Bus type
<3>[ 0.593645] [0: swapper/0: 1] msm_bus_fab_init_noc_ops: Invalid Bus type
<6>[ 0.606977] [0: swapper/0: 1] s2mpb03:s2mpb03_i2c_init
<6>[ 0.607064] [0: swapper/0: 1] s2dos05:s2dos05_i2c_init
<6>[ 0.607134] [0: swapper/0: 1] s2abb01:s2abb01_i2c_init
<5>[ 0.608188] [0: swapper/0: 1] arm-smmu 5040000.arm,smmu-kgsl: (IDR0.CTTW overridden by dma-coherent property)
<5>[ 0.608347] [0: swapper/0: 1] arm-smmu 5040000.arm,smmu-kgsl: stream matching with 5 register groups, mask 0x7
<3>[ 0.608532] [0: swapper/0: 1] arm-smmu 5040000.arm,smmu-kgsl: found 8 context interrupt(s) but have 5 context banks. assuming 5 context interrupts.
<3>[ 0.610523] [0: swapper/0: 1] arm-smmu 5040000.arm,smmu-kgsl: Using nonsecure pools v1
<3>[ 0.611065] [0: swapper/0: 1] register_client_adhoc:find path.src 139 dest 627
<3>[ 0.611347] [0: swapper/0: 1] register_client_adhoc:Client handle 1 apps_smmu
<5>[ 0.611650] [0: swapper/0: 1] arm-smmu 15000000.apps-smmu: (IDR0.CTTW overridden by dma-coherent property)
<5>[ 0.611806] [0: swapper/0: 1] arm-smmu 15000000.apps-smmu: stream matching with 77 register groups, mask 0x7fff
<3>[ 0.612305] [0: swapper/0: 1] arm-smmu 15000000.apps-smmu: found 64 context interrupt(s) but have 46 context banks. assuming 46 context interrupts.
<3>[ 0.613035] [1: swapper/0: 1] register_client_adhoc:find path.src 139 dest 627
<3>[ 0.613232] [1: swapper/0: 1] register_client_adhoc:Client handle 2 apps_smmu
<3>[ 0.613543] [1: swapper/0: 1] register_client_adhoc:find path.src 139 dest 627
<3>[ 0.613733] [1: swapper/0: 1] register_client_adhoc:Client handle 3 apps_smmu
<3>[ 0.614028] [1: swapper/0: 1] register_client_adhoc:find path.src 22 dest 773
<3>[ 0.614164] [1: swapper/0: 1] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu
<3>[ 0.614441] [1: swapper/0: 1] register_client_adhoc:find path.src 22 dest 773
<3>[ 0.614567] [1: swapper/0: 1] register_client_adhoc:Client handle 5 mnoc_hf_1_tbu
<3>[ 0.614830] [1: swapper/0: 1] register_client_adhoc:find path.src 137 dest 772
<3>[ 0.614962] [1: swapper/0: 1] register_client_adhoc:Client handle 6 mnoc_sf_0_tbu
<3>[ 0.615179] [1: swapper/0: 1] register_client_adhoc:find path.src 139 dest 627
<3>[ 0.615379] [1: swapper/0: 1] register_client_adhoc:Client handle 7 apps_smmu
<3>[ 0.615634] [1: swapper/0: 1] register_client_adhoc:find path.src 139 dest 627
<3>[ 0.615826] [1: swapper/0: 1] register_client_adhoc:Client handle 8 apps_smmu
<3>[ 0.616113] [1: swapper/0: 1] register_client_adhoc:find path.src 139 dest 627
<3>[ 0.616301] [1: swapper/0: 1] register_client_adhoc:Client handle 9 apps_smmu
<6>[ 0.617117] [0: swapper/0: 1] iommu: Adding device ae00000.qcom,mdss_mdp to group 0
<6>[ 0.617365] [0: swapper/0: 1] iommu: Adding device 8c0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 1
<6>[ 0.617622] [0: swapper/0: 1] iommu: Adding device ac0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 2
<6>[ 0.617899] [0: swapper/0: 1] iommu: Adding device 1de0000.qcedev to group 3
<6>[ 0.618132] [0: swapper/0: 1] iommu: Adding device 1de0000.qcrypto to group 4
<6>[ 0.618363] [0: swapper/0: 1] iommu: Adding device 18800000.qcom,icnss to group 5
<6>[ 0.618596] [0: swapper/0: 1] iommu: Adding device 800000.qcom,gpi-dma to group 6
<6>[ 0.618825] [0: swapper/0: 1] iommu: Adding device a00000.qcom,gpi-dma to group 7
<6>[ 0.619059] [0: swapper/0: 1] iommu: Adding device 88a7000.msm_tspp to group 8
<6>[ 0.619291] [0: swapper/0: 1] iommu: Adding device soc:apps_iommu_test_device to group 8
<6>[ 0.619522] [0: swapper/0: 1] iommu: Adding device soc:apps_iommu_coherent_test_device to group 8
<6>[ 0.619775] [0: swapper/0: 1] iommu: Adding device soc:qcom,msm-audio-ion to group 9
<6>[ 0.620010] [0: swapper/0: 1] iommu: Adding device a600000.ssusb to group 10
<6>[ 0.620286] [0: swapper/0: 1] iommu: Adding device soc:usb_audio_qmi_dev to group 11
<3>[ 0.620384] [0: swapper/0: 1] arm-smmu 15000000.apps-smmu: Using nonsecure pools v1
<6>[ 0.621875] [0: swapper/0: 1] vgaarb: loaded
<6>[ 0.622543] [0: swapper/0: 1] argos_probe: Start probe
<6>[ 0.622686] [0: swapper/0: 1] argos_probe: parse dt done
<6>[ 0.622776] [0: swapper/0: 1] max77705:max77705_i2c_init
<6>[ 0.622861] [0: swapper/0: 1] sm5720:sm5720_i2c_init
<6>[ 0.622928] [0: swapper/0: 1] s2mpb02:s2mpb02_i2c_init
<5>[ 0.623221] [0: swapper/0: 1] SCSI subsystem initialized
<6>[ 0.623432] [0: swapper/0: 1] usbcore: registered new interface driver usbfs
<6>[ 0.623533] [0: swapper/0: 1] usbcore: registered new interface driver hub
<6>[ 0.623791] [0: swapper/0: 1] usbcore: registered new device driver usb
<4>[ 0.624227] [0: swapper/0: 1] soc:usb_nop_phy supply vcc not found, using dummy regulator
<4>[ 0.625889] [0: swapper/0: 1] [Input Booster] input_booster_init ndevice_in_dt : 10
<4>[ 0.625978] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : KEY
<4>[ 0.626057] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 1
<4>[ 0.626138] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : TOUCHKEY
<4>[ 0.626217] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 1
<4>[ 0.626295] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : TOUCH
<4>[ 0.626371] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 3
<4>[ 0.626455] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MULTITOUCH
<4>[ 0.626536] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
<4>[ 0.626619] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : KEYBOARD
<4>[ 0.626699] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
<4>[ 0.626782] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MOUSE
<4>[ 0.626858] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
<4>[ 0.626938] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MOUSE WHEEL
<4>[ 0.627018] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
<4>[ 0.627098] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : PEN HOVER
<4>[ 0.627176] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
<4>[ 0.627256] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : PEN
<4>[ 0.627332] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
<4>[ 0.627413] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : KEY_TWO
<4>[ 0.627491] [0: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 1
<3>[ 0.628016] [0: swapper/0: 1] register_client_adhoc:find path.src 1 dest 512
<3>[ 0.628445] [0: swapper/0: 1] register_client_adhoc:Client handle 10 touch_bw
<6>[ 0.628788] [0: swapper/0: 1] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
<6>[ 0.628941] [0: swapper/0: 1] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
<6>[ 0.629185] [0: swapper/0: 1] (NULL device *): switch_powerkey is set for 116
<6>[ 0.629418] [0: swapper/0: 1] input: qpnp_pon as /devices/virtual/input/input0
<6>[ 0.630186] [0: swapper/0: 1] [sec_input] PMIC input: code=114, sts=0x0
<0>[ 0.630395] [0: swapper/0: 1] sec_debug:sec_debug_set_upload_cause() cafebabe
<6>[ 0.630498] [0: swapper/0: 1] [sec_input] PMIC input: code=116, sts=0x0
<0>[ 0.630566] [0: swapper/0: 1] sec_debug:sec_debug_set_upload_cause() 85
<6>[ 0.630649] [0: kworker/0:1: 73] cpufreq_limit_get: touch min same values(1132800,0) entered. just return.
<0>[ 0.630742] [0: swapper/0: 1] sec_debug:sec_debug_set_upload_cause() cafebabe
<6>[ 0.631952] [0: swapper/0: 1] s2abb01:s2abb01_pmic_probe
<6>[ 0.639888] [0: swapper/0: 1] s2abb01_pmic_probe: 0x06:0x23, 0x09:0xb2, 0x05:0x6a
<6>[ 0.640089] [0: swapper/0: 1] s2mpb02:s2mpb02_i2c_probe
<6>[ 0.640617] [0: swapper/0: 1] s2mpb02_i2c_probe: device id 0x1 is found
<4>[ 0.640684] [0: swapper/0: 1] s2mpb02:s2mpb02_irq_init No interrupt specified.
<6>[ 0.640944] [0: swapper/0: 1] s2mpb02-regulator s2mpb02-regulator: s2mpb02_pmic_probe
<6>[ 0.641635] [0: swapper/0: 1] s2mpb02-ldo1: Bringing 900000uV into 950000-950000uV
<6>[ 0.646744] [0: swapper/0: 1] s2mpb02-ldo4: Bringing 1200000uV into 1050000-1050000uV
<6>[ 0.650287] [0: swapper/0: 1] s2mpb02-ldo5: Bringing 1200000uV into 1050000-1050000uV
<6>[ 0.660832] [0: swapper/0: 1] s2mpb02-ldo13: Bringing 2900000uV into 2800000-2800000uV
<6>[ 0.663916] [0: swapper/0: 1] s2mpb02-ldo14: Bringing 2800000uV into 3300000-3300000uV
<6>[ 0.669019] [0: swapper/0: 1] s2mpb02-ldo17: Bringing 2950000uV into 2800000-2800000uV
<6>[ 0.673137] [0: swapper/0: 1] s2mpb02-buck1: Bringing 1600000uV into 1300000-1300000uV
<6>[ 0.677675] [0: swapper/0: 1] s2mpb02-buck2: Bringing 800000uV into 1300000-1300000uV
<6>[ 0.682962] [0: swapper/0: 1] i2c-gpio soc:i2c@1: using pins 23 (SDA) and 24 (SCL)
<6>[ 0.683247] [0: swapper/0: 1] s2dos05:s2dos05_pmic_probe
<6>[ 0.701056] [0: swapper/0: 1] s2dos05_powermeter_init: s2dos05 power meter init start
<6>[ 0.702757] [0: swapper/0: 1] s2dos05_powermeter_init: power mode enable (0x90)
<6>[ 0.702899] [0: swapper/0: 1] s2dos05_powermeter_init: s2dos05 power meter init end
<6>[ 0.704107] [0: swapper/0: 1] s2dos05_pmic_probe : dp_irq = 283
<6>[ 0.704486] [1: swapper/0: 1] i2c-gpio soc:i2c@21: using pins 127 (SDA) and 128 (SCL)
<6>[ 0.704763] [1: swapper/0: 1] s2mpb03:s2mpb03_pmic_probe
<6>[ 0.705530] [1: swapper/0: 1] s2mpb03-ldo1: Bringing 1050000uV into 1000000-1000000uV
<6>[ 0.714519] [1: swapper/0: 1] s2mpb03-ldo5: Bringing 2150000uV into 3200000-3200000uV
<6>[ 0.719092] [1: swapper/0: 1] s2mpb03-ldo6: Bringing 2800000uV into 2850000-2850000uV
<6>[ 0.724522] [1: swapper/0: 1] s2mpb03:s2mpb03_pmic_probe: additional register init
<6>[ 0.727976] [1: swapper/0: 1] i2c-gpio soc:i2c@2: using pins 11 (SDA) and 74 (SCL)
<6>[ 0.728287] [1: swapper/0: 1] i2c-gpio soc:i2c@20: using pins 103 (SDA) and 104 (SCL)
<6>[ 0.728557] [1: swapper/0: 1] i2c-gpio soc:i2c@18: using pins 62 (SDA) and 63 (SCL)
<6>[ 0.728859] [1: swapper/0: 1] [pcal6524_gpio_probe]
<6>[ 0.729014] [1: swapper/0: 1] [pcal6524_parse_dt] Pull reg P0[0x0000] P1[0x0000] P2[0x0000]
<6>[ 0.729094] [1: swapper/0: 1] [pcal6524_parse_dt] initialize reg 0x7fffff 0x000000 0x000000 0x000000
<6>[ 0.729179] [1: swapper/0: 1] [pcal6524_parse_dt]gpio_start=[300]ngpio=[24]reset-gpio=[69]
<6>[ 0.729264] [1: swapper/0: 1] pcal6524_power_ctrl: gpio expander 1.8V on is finished.
<3>[ 0.729336] [1: swapper/0: 1] [pcal6524 gpio expander] pcal6524_power_ctrl enable(1)
<6>[ 0.729532] [1: swapper/0: 1] pcal6524-gpio 22-0022: gpios 300..323 on a gpio-expander
<6>[ 0.729664] [1: swapper/0: 1] i2c-gpio soc:i2c@22: using pins 123 (SDA) and 124 (SCL)
<6>[ 0.729869] [1: swapper/0: 1] i2c-gpio soc:i2c@17: using pins 114 (SDA) and 115 (SCL)
<6>[ 0.730118] [1: swapper/0: 1] i2c-gpio soc:i2c@14: using pins 91 (SDA) and 92 (SCL)
<6>[ 0.730243] [1: swapper/0: 1] media: Linux media interface: v0.10
<6>[ 0.730338] [1: swapper/0: 1] Linux video capture interface: v2.00
<6>[ 0.739324] [1: kworker/1:1: 74] tsens[1:459][2:453][3:449][4:449][7:453][8:446][9:446][10:449][5:456][6:459][11:426][12:430]
<6>[ 0.742110] [1: swapper/0: 1] EDAC MC: Ver: 3.0.0
<6>[ 0.744908] [0: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
<3>[ 0.745122] [0: swapper/0: 1] [rmem_dma_device_init] dev name : soc:qcom,ion:qcom,ion-heap@27
<6>[ 0.745205] [0: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
<6>[ 0.745452] [0: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node secure_sp_region
<6>[ 0.745621] [0: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
<6>[ 0.745878] [0: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@30: assigned reserved memory node camera_mem_region
<6>[ 0.746128] [0: swapper/0: 1] ION heap system created
<6>[ 0.746345] [1: swapper/0: 1] ION heap adsp created at 0x00000000f2800000 with size 1000000
<6>[ 0.746433] [1: swapper/0: 1] ION heap qsecom created at 0x0000000099c00000 with size 2000000
<6>[ 0.749763] [1: swapper/0: 1] ION heap qsecom_ta created at 0x00000000ff000000 with size 1000000
<6>[ 0.749985] [0: swapper/0: 1] ION heap spss created at 0x00000000f3c00000 with size 800000
<6>[ 0.750091] [0: swapper/0: 1] ION heap secure_display created at 0x00000000f4400000 with size 8c00000
<6>[ 0.750178] [0: swapper/0: 1] ION heap secure_heap created
<6>[ 0.750487] [0: swapper/0: 1] ION heap camera_preview created at 0x00000000c0000000 with size 24400000
<3>[ 0.751554] [0: swapper/0: 1] ipa ipa3_tz_unlock_reg:4884 Bad parameters
<3>[ 0.751625] [0: swapper/0: 1] ipa ipa3_pre_init:5084 Failed to unlock memory region using TZ
<3>[ 0.751844] [0: swapper/0: 1] register_client_adhoc:find path.src 90 dest 512
<3>[ 0.752341] [0: swapper/0: 1] register_client_adhoc:find path.src 90 dest 585
<3>[ 0.752531] [0: swapper/0: 1] register_client_adhoc:find path.src 1 dest 676
<3>[ 0.752818] [0: swapper/0: 1] register_client_adhoc:find path.src 143 dest 777
<3>[ 0.752949] [0: swapper/0: 1] register_client_adhoc:Client handle 11 ipa
<3>[ 0.753512] [0: swapper/0: 1] ipa ipa3_uc_state_check:284 uC interface not initialized
<3>[ 0.754296] [1: swapper/0: 1] ipa ipa3_uc_state_check:284 uC interface not initialized
<6>[ 0.754933] [1: swapper/0: 1] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_ap to group 12
<6>[ 0.755275] [1: swapper/0: 1] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_wlan to group 13
<6>[ 0.755632] [0: swapper/0: 1] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_uc to group 14
<6>[ 0.757162] [0: swapper/0: 1] PMIC@SID0: PM8998 v2.0 options: 0, 0, 0, 0
<6>[ 0.757364] [0: swapper/0: 1] PMIC@SID4: PM8005 v2.0 options: 0, 0, 0, 0
<6>[ 0.758018] [0: swapper/0: 1] msm_ext_disp_extcon_register: extcon registration done
<6>[ 0.758203] [0: swapper/0: 1] msm_ext_disp_probe: msm_ext_disp_probe: Added child devices.
<6>[ 0.758989] [0: swapper/0: 1] muic_notifier_header_init
<6>[ 0.759123] [0: swapper/0: 1] [SENSORS CLASS] sensors_class_init
<6>[ 0.759407] [0: swapper/0: 1] input: meta_event as /devices/virtual/input/input1
<6>[ 0.759500] [0: swapper/0: 1] [SENSORS CLASS] sensors_class_init succcess
<6>[ 0.759580] [0: swapper/0: 1] fingerprint_class_init
<6>[ 0.759696] [0: swapper/0: 1] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.760391] [0: swapper/0: 1] Bluetooth: Core ver 2.22
<6>[ 0.760477] [0: swapper/0: 1] NET: Registered protocol family 31
<6>[ 0.760550] [0: swapper/0: 1] Bluetooth: HCI device and connection manager initialized
<6>[ 0.760645] [0: swapper/0: 1] Bluetooth: HCI socket layer initialized
<6>[ 0.760722] [0: swapper/0: 1] Bluetooth: L2CAP socket layer initialized
<6>[ 0.760821] [0: swapper/0: 1] Bluetooth: SCO socket layer initialized
<4>[ 0.761088] [0: swapper/0: 1] regulatory is not upadted via queue_regulatory_request.
<6>[ 0.761369] [1: swapper/0: 1] NetLabel: Initializing
<6>[ 0.761434] [1: swapper/0: 1] NetLabel: domain hash size = 128
<6>[ 0.761502] [1: swapper/0: 1] NetLabel: protocols = UNLABELED CIPSOv4
<6>[ 0.761625] [1: swapper/0: 1] NetLabel: unlabeled traffic allowed by default
<1>[ 0.761761] [1: swapper/0: 1] pcie:pcie_init.
<4>[ 0.763278] [2: swapper/0: 1] 1c00000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
<4>[ 0.763627] [2: swapper/0: 1] 1c00000.qcom,pcie supply gdsc-smmu not found, using dummy regulator
<3>[ 0.764041] [2: swapper/0: 1] register_client_adhoc:find path.src 45 dest 512
<3>[ 0.764632] [2: swapper/0: 1] register_client_adhoc:Client handle 12 pcie0
<3>[ 0.764806] [2: swapper/0: 1] msm_pcie_get_resources: PCIe: RC0 can't get iatu resource.
<3>[ 0.765020] [2: swapper/0: 1] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
<6>[ 0.767171] [2: kworker/2:0: 27] spmi spmi-1: SPMI PMIC arbiter debug bus controller added
<6>[ 0.767520] [2: kworker/2:0: 27] gpu_gx_gdsc: supplied by pm8005_s1_level
<6>[ 0.769414] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (300000000 Hz, 584000 uv) on cpu0
<6>[ 0.770338] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (1766400000 Hz, 836000 uv) on cpu0
<6>[ 0.770513] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (300000000 Hz, 584000 uv) on cpu1
<6>[ 0.771369] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (1766400000 Hz, 836000 uv) on cpu1
<6>[ 0.771540] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (300000000 Hz, 584000 uv) on cpu2
<6>[ 0.772369] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (1766400000 Hz, 836000 uv) on cpu2
<6>[ 0.772531] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (300000000 Hz, 584000 uv) on cpu3
<6>[ 0.773405] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (1766400000 Hz, 836000 uv) on cpu3
<6>[ 0.773556] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (825600000 Hz, 612000 uv) on cpu4
<6>[ 0.774846] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (2803200000 Hz, 1048000 uv) on cpu4
<6>[ 0.775016] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (825600000 Hz, 612000 uv) on cpu5
<6>[ 0.776292] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (2803200000 Hz, 1048000 uv) on cpu5
<6>[ 0.776444] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (825600000 Hz, 612000 uv) on cpu6
<6>[ 0.777735] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (2803200000 Hz, 1048000 uv) on cpu6
<6>[ 0.777885] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (825600000 Hz, 612000 uv) on cpu7
<6>[ 0.779117] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (2803200000 Hz, 1048000 uv) on cpu7
<6>[ 0.779550] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on soc:qcom,l3-cpu0
<6>[ 0.779652] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on soc:qcom,l3-cpu4
<6>[ 0.779751] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on soc:qcom,l3-cdsp
<6>[ 0.779850] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on 5000000.qcom,kgsl-3d0
<6>[ 0.782193] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (1478400000 Hz, 824000 uv) on soc:qcom,l3-cpu0
<6>[ 0.782290] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (1478400000 Hz, 824000 uv) on soc:qcom,l3-cpu4
<6>[ 0.782384] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (1478400000 Hz, 824000 uv) on soc:qcom,l3-cdsp
<6>[ 0.782480] [2: kworker/2:0: 27] clk: add_opp: Set OPP pair (1478400000 Hz, 824000 uv) on 5000000.qcom,kgsl-3d0
<6>[ 0.783505] [2: kworker/2:0: 27] cpufreq_limit_set_table: freq table is ready, update config
<6>[ 0.783595] [2: kworker/2:0: 27] cpufreq_limit_set_table: updated: little(150000-883200), big(902400--1)
<6>[ 0.783947] [2: kworker/2:0: 27] cpufreq: driver osm-cpufreq up and running
<6>[ 0.784057] [2: kworker/2:0: 27] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
<6>[ 0.784954] [2: kworker/2:0: 27] sched-energy energy-costs: cpu=0 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
<6>[ 0.785137] [2: kworker/2:0: 27] CPU0: update cpu_capacity 381
<6>[ 0.785259] [2: kworker/2:0: 27] sched-energy energy-costs: cpu=1 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
<6>[ 0.785433] [2: kworker/2:0: 27] CPU1: update cpu_capacity 381
<6>[ 0.785553] [2: kworker/2:0: 27] sched-energy energy-costs: cpu=2 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
<6>[ 0.785727] [2: kworker/2:0: 27] CPU2: update cpu_capacity 381
<6>[ 0.785848] [2: kworker/2:0: 27] sched-energy energy-costs: cpu=3 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
<6>[ 0.786023] [2: kworker/2:0: 27] CPU3: update cpu_capacity 381
<6>[ 0.786143] [2: kworker/2:0: 27] sched-energy energy-costs: cpu=4 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
<6>[ 0.786311] [2: kworker/2:0: 27] CPU4: update cpu_capacity 1024
<6>[ 0.786428] [2: kworker/2:0: 27] sched-energy energy-costs: cpu=5 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
<6>[ 0.786598] [2: kworker/2:0: 27] CPU5: update cpu_capacity 1024
<6>[ 0.786716] [2: kworker/2:0: 27] sched-energy energy-costs: cpu=6 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
<6>[ 0.786895] [2: kworker/2:0: 27] CPU6: update cpu_capacity 1024
<6>[ 0.787017] [2: kworker/2:0: 27] sched-energy energy-costs: cpu=7 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
<6>[ 0.787193] [2: kworker/2:0: 27] CPU7: update cpu_capacity 1024
<6>[ 0.791000] [2: kworker/2:0: 27] sched-energy energy-costs: Sched-energy-costs capacity updated
<6>[ 0.791857] [4: swapper/0: 1] sec_debug_summary:sec_debug_summary_init: SMEM_ID_VENDOR0=0x88 size=0x4540
<6>[ 0.792011] [4: swapper/0: 1] sec_debug_summary:sec_debug_summary_init: apss(860083d8) rpm(86009978) modem(8600a938) dsps(8600b918)
<6>[ 0.792145] [4: swapper/0: 1] sec_debug_summary:summary_init_core_reg: sec_debug_core_reg_paddr = 0x8216bb10
<6>[ 0.792252] [4: swapper/0: 1] sec_debug_summary:sec_debug_summary_set_msm_dump_info: cpu_data_paddr = 0x1f1ebde00
<6>[ 0.792362] [4: swapper/0: 1] sec_debug_summary:sec_debug_summary_set_msm_dump_info: cpu_buf_paddr = 0x1f1eec000
<6>[ 0.792477] [4: swapper/0: 1] summary_set_lpm_info_cluster : 0x82a35c78
<6>[ 0.792553] [4: swapper/0: 1] summary_set_lpm_info_cluster : offset 0x58
<6>[ 0.792630] [4: swapper/0: 1] summary_set_lpm_info_runqueues : 0x8216d300
<6>[ 0.792709] [4: swapper/0: 1] summary_set_msm_memdump_info : 0x1f3af4000
<6>[ 0.794113] [4: swapper/0: 1] clocksource: Switched to clocksource arch_sys_counter
<5>[ 0.824169] [4: swapper/0: 1] VFS: Disk quotas dquot_6.6.0
<6>[ 0.824309] [4: swapper/0: 1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 0.825097] [4: swapper/0: 1] debugcc-sdm845 soc:qcom,cc-debug@100000: Registered debug mux successfully
<6>[ 0.825962] [4: swapper/0: 1] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
<6>[ 0.826048] [4: swapper/0: 1] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
<4>[ 0.826223] [4: swapper/0: 1] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
<4>[ 0.826326] [4: swapper/0: 1] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
<4>[ 0.826426] [4: swapper/0: 1] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
<4>[ 0.826525] [4: swapper/0: 1] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
<4>[ 0.826623] [4: swapper/0: 1] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
<6>[ 0.827154] [4: swapper/0: 1] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=0, clocks successfully
<6>[ 0.827274] [4: swapper/0: 1] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
<6>[ 0.827355] [4: swapper/0: 1] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
<4>[ 0.827507] [4: swapper/0: 1] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
<4>[ 0.827608] [4: swapper/0: 1] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
<4>[ 0.827709] [4: swapper/0: 1] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
<4>[ 0.827807] [4: swapper/0: 1] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
<4>[ 0.827906] [4: swapper/0: 1] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
<3>[ 0.833082] [4: swapper/0: 1] dsi_pll_10nm_lock_status: DSI PLL(1) lock failed, status=0x00000000
<6>[ 0.833361] [4: swapper/0: 1] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=1, clocks successfully
<6>[ 0.833484] [4: swapper/0: 1] mdss_pll_probe: MDSS pll label = MDSS DP PLL
<6>[ 0.836967] [4: swapper/0: 1] __init_sec_tsp_raw_data: vaddr=0xffffffc171290000 size=0xc800
<6>[ 0.837058] [4: swapper/0: 1] __init_sec_tsp_raw_data: init done
<6>[ 0.837132] [4: swapper/0: 1] __init_sec_tsp_log: vaddr=0xffffffc1712c0000 size=0x40000
<6>[ 0.837218] [4: swapper/0: 1] __init_sec_tsp_log: init done
<6>[ 0.837391] [4: swapper/0: 1] NET: Registered protocol family 2
<6>[ 0.837883] [4: swapper/0: 1] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
<6>[ 0.838241] [4: swapper/0: 1] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>[ 0.838984] [4: swapper/0: 1] TCP: Hash tables configured (established 65536 bind 65536)
<6>[ 0.839107] [4: swapper/0: 1] UDP hash table entries: 4096 (order: 5, 131072 bytes)
<6>[ 0.839313] [4: swapper/0: 1] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
<6>[ 0.839666] [4: swapper/0: 1] NET: Registered protocol family 1
<7>[ 0.839757] [4: swapper/0: 1] PCI: CLS 0 bytes, default 128
<6>[ 0.840411] [4: swapper/0: 1] Trying to unpack rootfs image as initramfs...
<6>[ 1.103178] [4: swapper/0: 1] Freeing initrd memory: 14892K
<7>[ 1.103277] [4: swapper/0: 1] initcall populate_rootfs+0x0/0x188 returned 0 after 256879 usecs
<6>[ 1.104220] [4: swapper/0: 1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
<3>[ 1.105022] [4: swapper/0: 1] kvm [1]: HYP mode not available
<6>[ 1.110320] [4: swapper/0: 1] audit: initializing netlink subsys (enabled)
<5>[ 1.111434] [4: swapper/0: 1] Initialise system trusted keyrings
<6>[ 1.112318] [4: swapper/0: 1] workingset: timestamp_bits=46 max_order=21 bucket_order=0
<6>[ 1.114381] [4: swapper/0: 1] [SDFAT] Filesystem version 2.1.8
<6>[ 1.114926] [4: swapper/0: 1] Registering sdcardfs 0.1
<6>[ 1.115063] [4: swapper/0: 1] fuse init (API version 7.26)
<6>[ 1.115209] [4: swapper/0: 1] ss_platform_log:ss_plog_probe: attached 0x200000x@0xa1100000
<6>[ 1.115369] [4: swapper/0: 1] ss_platform_log:ss_plog_probe: logger buffer alloc address: 0x0000000000000000
<7>[ 1.115783] [4: swapper/0: 1] SELinux: Registering netfilter hooks
<4>[ 1.116008] [4: swapper/0: 1] key_dump feature not available
<4>[ 1.116070] [4: swapper/0: 1] dek: initialized
<4>[ 1.116121] [4: swapper/0: 1] SDP_MM: entering************************************************
<4>[ 1.116232] [4: swapper/0: 1] SDP_PUB_CRYPTO[1] : pub_crypto_mod_init netlink socket is created successfully!
<4>[ 1.116355] [4: swapper/0: 1] SDP_FS_HANDLER[1] : sdp_fs_handler_mod_init netlink socket is created successfully!
<4>[ 1.116465] [4: swapper/0: 1] DLP: dlp_ioctl initialized
<3>[ 1.116520] [4: swapper/0: 1] [MST] mst_drv_init
<4>[ 1.116778] [4: swapper/0: 1] [MST] mst_ldo_device_probe init start
<6>[ 1.117603] [4: swapper/0: 1] pcal6524_gpio_request gpio 4
<6>[ 1.117665] [4: swapper/0: 1] pcal6524_gpio_direction_output(off=[4], val=[0])
<3>[ 1.118793] [4: swapper/0: 1] [MST] sec_mst_gpio_init : Send Output
<7>[ 1.118877] [4: swapper/0: 1] [MST] MST drv driver (mst_drv) is initialized.
<3>[ 1.118969] [4: swapper/0: 1] [MST] MST_LDO_DRV]]] init , ret val : 0
<6>[ 1.119338] [4: swapper/0: 1] iccc_init:
<6>[ 1.119385] [4: swapper/0: 1] iccc_init: registered /proc/iccc_ready interface
<5>[ 1.131697] [4: swapper/0: 1] Key type asymmetric registered
<5>[ 1.131759] [4: swapper/0: 1] Asymmetric key parser 'x509' registered
<6>[ 1.131835] [4: swapper/0: 1] io scheduler noop registered
<6>[ 1.131960] [4: swapper/0: 1] io scheduler cfq registered (default)
<6>[ 1.135692] [4: swapper/0: 1] vbus_notifier_init
<6>[ 1.136356] [4: swapper/0: 1] fb0: Virtual frame buffer device, using 3000K of video memory
<6>[ 1.137132] [4: swapper/0: 1] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5b00: Registered qpnp_clkdiv_1 successfully
<6>[ 1.137298] [4: swapper/0: 1] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5c00: Registered qpnp_clkdiv_2 successfully
<6>[ 1.137460] [4: swapper/0: 1] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5d00: Registered qpnp_clkdiv_3 successfully
<3>[ 1.149586] [4: swapper/0: 1] register_client_adhoc:find path.src 125 dest 512
<3>[ 1.149906] [4: swapper/0: 1] register_client_adhoc:Client handle 13 scm_pas
<3>[ 1.149990] [4: swapper/0: 1] minidump-id not found for adsp
<3>[ 1.150343] [4: swapper/0: 1] minidump-id not found for slpi
<3>[ 1.150473] [4: swapper/0: 1] minidump-id not found for spss
<6>[ 1.150584] [4: swapper/0: 1] subsys-pil-tz 188101c.qcom,spss: for spss segments only will be dumped.
<3>[ 1.150864] [4: swapper/0: 1] minidump-id not found for cdsp
<3>[ 1.151207] [4: swapper/0: 1] register_client_adhoc:find path.src 63 dest 512
<3>[ 1.151416] [4: swapper/0: 1] register_client_adhoc:Client handle 14 pil-venus
<3>[ 1.151491] [4: swapper/0: 1] minidump-id not found for venus
<6>[ 1.151558] [4: swapper/0: 1] subsys-pil-tz aae0000.qcom,venus: for venus segments only will be dumped.
<3>[ 1.151760] [4: swapper/0: 1] minidump-id not found for ipa_fws
<6>[ 1.151826] [4: swapper/0: 1] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
<3>[ 1.152053] [4: swapper/0: 1] minidump-id not found for a630_zap
<6>[ 1.152121] [4: swapper/0: 1] subsys-pil-tz soc:qcom,kgsl-hyp: for a630_zap segments only will be dumped.
<6>[ 1.152660] [4: swapper/0: 1] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
<6>[ 1.155071] [4: swapper/0: 1] msm_geni_serial 898000.qcom,qup_uart: Wakeup byte 0xfd
<6>[ 1.155169] [4: swapper/0: 1] msm_geni_serial 898000.qcom,qup_uart: No wakeup IRQ configured
<6>[ 1.155265] [4: swapper/0: 1] msm_geni_serial 898000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
<6>[ 1.155458] [4: swapper/0: 1] 898000.qcom,qup_uart: ttyHS0 at MMIO 0x898000 (irq = 8, base_baud = 0) is a MSM
<3>[ 1.155700] [4: swapper/0: 1] msm_geni_serial a84000.qcom,qup_uart: qcom,msm-geni-console: Console is null.
<3>[ 1.155881] [4: swapper/0: 1] msm_geni_serial a90000.qcom,qup_uart: qcom,msm-geni-console: Console is null.
<6>[ 1.157010] [4: swapper/0: 1] msm_geni_serial a84000.qcom,qup_hsuart: No wakeup IRQ configured
<6>[ 1.157108] [4: swapper/0: 1] msm_geni_serial a84000.qcom,qup_hsuart: Serial port8 added.FifoSize 64 is_console0
<6>[ 1.157307] [4: swapper/0: 1] a84000.qcom,qup_hsuart: ttyHS8 at MMIO 0xa84000 (irq = 15, base_baud = 0) is a MSM
<6>[ 1.157501] [4: swapper/0: 1] msm_geni_serial_init: Driver initialized
<3>[ 1.157722] [4: swapper/0: 1] register_client_adhoc:find path.src 1 dest 618
<3>[ 1.157927] [0: hwrng: 187] register_client_adhoc:Client handle 15 msm-rng-noc
<5>[ 1.159300] [0: hwrng: 187] random: crng init done
<6>[ 1.171435] [4: swapper/0: 1] [drm] Initialized
<3>[ 1.171578] [4: swapper/0: 1] register_client_adhoc:find path.src 20003 dest 20515
<3>[ 1.171719] [4: swapper/0: 1] register_client_adhoc:find path.src 20004 dest 20515
<3>[ 1.171843] [4: swapper/0: 1] register_client_adhoc:Client handle 16 disp_rsc_mnoc
<3>[ 1.171937] [4: swapper/0: 1] register_client_adhoc:find path.src 20001 dest 20513
<3>[ 1.172067] [4: swapper/0: 1] register_client_adhoc:Client handle 17 disp_rsc_llcc
<3>[ 1.172162] [4: swapper/0: 1] register_client_adhoc:find path.src 20000 dest 20512
<3>[ 1.172287] [4: swapper/0: 1] register_client_adhoc:Client handle 18 disp_rsc_ebi
<6>[ 1.172541] [4: swapper/0: 1] [sde_rsc_hw:rsc_hw_init:693]: sde rsc init successfully done
<6>[ 1.172638] [4: swapper/0: 1] [sde_rsc:sde_rsc_probe:1435]: sde rsc index:0 probed successfully
<6>[ 1.173087] [4: swapper/0: 1] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
<6>[ 1.173236] [4: swapper/0: 1] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-1
<3>[ 1.173789] [4: swapper/0: 1] AXI: get_pdata(): Error: Client name not found
<3>[ 1.173866] [4: swapper/0: 1] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
<6>[ 1.173976] [4: swapper/0: 1] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0
<3>[ 1.174151] [4: swapper/0: 1] AXI: get_pdata(): Error: Client name not found
<3>[ 1.174227] [4: swapper/0: 1] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
<6>[ 1.174335] [4: swapper/0: 1] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-1
<3>[ 1.175256] [4: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_reset_sequence:2212] RESET SEQ LENGTH = 24
<6>[ 1.175368] [4: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_misc_features:2261] dsi_panel_parse_misc_features: ulps feature enabled
<6>[ 1.175486] [4: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_misc_features:2267] dsi_panel_parse_misc_features: ulps during suspend feature disabled
<6>[ 1.175648] [4: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_esd_config:3369] ESD enabled with mode: register_read
<6>[ 1.175754] [4: swapper/0: 1] msm-dsi-panel:[dsi_panel_get:3466] ESD enabled with mode: (null)
<3>[ 1.176227] [4: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: function 'ub_detect' not supported
<3>[ 1.176325] [4: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: invalid function ub_detect in map table
<3>[ 1.176434] [4: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: function 'ub_detect' not supported
<3>[ 1.176527] [4: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: invalid function ub_detect in map table
<3>[ 1.176727] [4: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_reset_sequence:2212] RESET SEQ LENGTH = 24
<6>[ 1.176833] [4: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_misc_features:2261] dsi_panel_parse_misc_features: ulps feature enabled
<6>[ 1.176952] [4: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_misc_features:2267] dsi_panel_parse_misc_features: ulps during suspend feature disabled
<6>[ 1.177105] [4: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_esd_config:3369] ESD enabled with mode: (null)
<6>[ 1.177204] [4: swapper/0: 1] msm-dsi-panel:[dsi_panel_get:3466] ESD enabled with mode: irq_check
<3>[ 1.177351] [4: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: function 'ub_detect' not supported
<3>[ 1.177444] [4: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: invalid function ub_detect in map table
<3>[ 1.177550] [4: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: function 'ub_detect' not supported
<3>[ 1.177643] [4: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: invalid function ub_detect in map table
<3>[ 1.178432] [4: swapper/0: 1] msm-dsi-display:[dsi_display_get_boot_display] index = 0
<3>[ 1.178517] [4: swapper/0: 1] msm-dsi-display:[dsi_display_get_boot_display] index = 1
<6>[ 1.178810] [4: swapper/0: 1] [mdss] ss_spi_init : ++
<6>[ 1.178884] [4: swapper/0: 1] [mdss] ss_spi_init : --
<6>[ 1.181098] [4: swapper/0: 1] iommu: Adding device 506a000.qcom,gmu:gmu_user to group 15
<6>[ 1.181429] [4: swapper/0: 1] iommu: Adding device 506a000.qcom,gmu:gmu_kernel to group 16
<3>[ 1.183148] [4: swapper/0: 1] register_client_adhoc:find path.src 26 dest 512
<3>[ 1.183342] [4: swapper/0: 1] register_client_adhoc:Client handle 19 grp3d
<3>[ 1.183430] [4: swapper/0: 1] register_client_adhoc:find path.src 26 dest 10036
<3>[ 1.183624] [4: swapper/0: 1] register_client_adhoc:Client handle 20 cnoc
<3>[ 1.183696] [4: swapper/0: 1] query_client_usecase_all: query_start
<3>[ 1.183796] [4: swapper/0: 1] query_client_usecase_all: query_start
<6>[ 1.184830] [4: swapper/0: 1] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 17
<6>[ 1.185184] [4: swapper/0: 1] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 18
<6>[ 1.214061] [4: swapper/0: 1] brd: module loaded
<6>[ 1.218000] [4: swapper/0: 1] loop: module loaded
<6>[ 1.218074] [4: swapper/0: 1] lkdtm: No crash points registered, enable through debugfs
<4>[ 1.218459] [4: swapper/0: 1] CHRDEV "msm_hdcp" major number 233 goes below the dynamic allocation range
<4>[ 1.219006] [4: swapper/0: 1] CHRDEV "qseecom" major number 232 goes below the dynamic allocation range
<6>[ 1.219225] [4: swapper/0: 1] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1400000
<4>[ 1.219325] [4: swapper/0: 1] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
<6>[ 1.219411] [4: swapper/0: 1] QSEECOM: qseecom_probe: no-clock-support=0x1
<4>[ 1.219486] [4: swapper/0: 1] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
<4>[ 1.219597] [4: swapper/0: 1] QSEECOM: qseecom_probe: secure app region addr=0x86d00000 size=0x4800000
<3>[ 1.219965] [4: swapper/0: 1] register_client_adhoc:find path.src 125 dest 512
<3>[ 1.220375] [4: swapper/0: 1] register_client_adhoc:Client handle 21 qseecom-noc
<4>[ 1.220511] [4: swapper/0: 1] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
<6>[ 1.220945] [4: swapper/0: 1] QSEECOM: qseecom_probe: created debugfs file
<6>[ 1.221816] [4: swapper/0: 1] drb: dev_ril_bridge_probe: +++
<6>[ 1.221906] [4: swapper/0: 1] drb: dev_ril_bridge_probe: ---
<6>[ 1.222064] [4: swapper/0: 1] sec_param:sec_param_work_init() start
<6>[ 1.222133] [4: swapper/0: 1] sec_param:sec_param_work_init() end
<3>[ 1.222364] [4: swapper/0: 1] sec_smem:sec_smem_probe() sec_smem_probe vendor1->apps_stat.clk = 000000008276f288
<6>[ 1.222524] [4: swapper/0: 1] init tzic
<4>[ 1.222570] [4: swapper/0: 1] CHRDEV "tzic" major number 231 goes below the dynamic allocation range
<6>[ 1.222741] [4: swapper/0: 1] sec_ap_pmic_init: ap_pmic successfully inited.
<3>[ 1.222938] [4: swapper/0: 1] register_client_adhoc:find path.src 125 dest 512
<3>[ 1.223220] [4: swapper/0: 1] register_client_adhoc:Client handle 22 qcedev-noc
<6>[ 1.225765] [4: swapper/0: 1] qce 1de0000.qcedev: QTI Crypto 5.4.1 device found @0x1de0000
<6>[ 1.225978] [4: swapper/0: 1] qce 1de0000.qcedev: CE device = 0x0 IO base, CE = 0000000000000000 Consumer (IN) PIPE 6,
<6>[ 1.225978] [4: swapper/0: 1] Producer (OUT) PIPE 7 IO base BAM = 0000000000000000
<6>[ 1.225978] [4: swapper/0: 1] BAM IRQ 83 Engines Availability = 0x2011073
<6>[ 1.226925] [4: swapper/0: 1] sps:BAM 0x0000000001dc4000 is registered.
<6>[ 1.227357] [4: swapper/0: 1] sps:BAM 0x0000000001dc4000 (va:0x0000000000000000) enabled: ver:0x27, number of pipes:16
<6>[ 1.228033] [4: swapper/0: 1] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 83
<6>[ 1.233063] [4: swapper/0: 1] iommu: Adding device 1de0000.qcedev:qcom_cedev_ns_cb to group 19
<6>[ 1.234279] [4: swapper/0: 1] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_ns_cb and create mapping
<6>[ 1.234530] [4: swapper/0: 1] qcedev_setup_context_bank Context Bank name:ns_context, is_secure:0, start_addr:0x60000000
<6>[ 1.234789] [4: swapper/0: 1] qcedev_setup_context_bank size:0x40000000, dev:0000000000000000, mapping:0000000000000000
<6>[ 1.235133] [4: swapper/0: 1] iommu: Adding device 1de0000.qcedev:qcom_cedev_s_cb to group 20
<6>[ 1.237541] [4: swapper/0: 1] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_s_cb and create mapping
<6>[ 1.237789] [4: swapper/0: 1] qcedev_setup_context_bank Context Bank name:secure_context, is_secure:1, start_addr:0x60200000
<6>[ 1.238050] [4: swapper/0: 1] qcedev_setup_context_bank size:0x40000000, dev:0000000000000000, mapping:0000000000000000
<3>[ 1.239431] [4: swapper/0: 1] register_client_adhoc:find path.src 125 dest 512
<3>[ 1.239856] [4: swapper/0: 1] register_client_adhoc:Client handle 23 qcrypto-noc
<6>[ 1.242037] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: QTI Crypto 5.4.1 device found @0x1de0000
<6>[ 1.242252] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: CE device = 0x0 IO base, CE = 0000000000000000 Consumer (IN) PIPE 4,
<6>[ 1.242252] [4: swapper/0: 1] Producer (OUT) PIPE 5 IO base BAM = 0000000000000000
<6>[ 1.242252] [4: swapper/0: 1] BAM IRQ 83 Engines Availability = 0x2011073
<6>[ 1.243364] [4: swapper/0: 1] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 83
<6>[ 1.248727] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
<6>[ 1.249311] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
<6>[ 1.249849] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
<6>[ 1.250441] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
<6>[ 1.251009] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
<6>[ 1.251560] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
<6>[ 1.252130] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
<6>[ 1.252675] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
<6>[ 1.253224] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-sha1
<6>[ 1.253754] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-sha256
<6>[ 1.254305] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
<6>[ 1.254880] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
<6>[ 1.255456] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
<6>[ 1.256029] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
<6>[ 1.256620] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
<6>[ 1.257172] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
<6>[ 1.257749] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
<6>[ 1.258276] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
<6>[ 1.258817] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
<6>[ 1.259337] [4: swapper/0: 1] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
<4>[ 1.260199] [4: swapper/0: 1] CHRDEV "iceufs" major number 230 goes below the dynamic allocation range
<6>[ 1.261813] [4: swapper/0: 1] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
<6>[ 1.264623] [4: swapper/0: 1] qcom_ice_get_pdevice: found ice device 0000000000000000
<6>[ 1.264815] [4: swapper/0: 1] qcom_ice_get_pdevice: matching platform device 0000000000000000
<3>[ 1.265421] [4: swapper/0: 1] register_client_adhoc:find path.src 123 dest 512
<3>[ 1.265844] [4: swapper/0: 1] register_client_adhoc:find path.src 1 dest 757
<3>[ 1.266209] [4: swapper/0: 1] register_client_adhoc:Client handle 24 ufshc_mem
<6>[ 1.267450] [4: swapper/0: 1] scsi host0: ufshcd
<3>[ 1.268191] [4: swapper/0: 1] ufshcd-qcom 1d84000.ufshc: UFS Assert is done
<3>[ 1.268433] [4: swapper/0: 1] ufshcd-qcom 1d84000.ufshc: UFS Deassert is done
<6>[ 1.273153] [4: swapper/0: 1] qcom_ice 1d90000.ufsice: QC ICE 3.1.75 device found @0x0000000000000000
<6>[ 1.291338] [4: swapper/0: 1] SCSI Media Changer driver v0.25
<6>[ 1.299340] [4: swapper/0: 1] [SDE] ss_spi_probe : chip select(0), bus number(15)
<3>[ 1.299533] [4: swapper/0: 1] [SDE] ss_spi_probe : np name : /soc/spi@a9c000
<6>[ 1.299713] [4: swapper/0: 1] [SDE] ss_spi_probe : max speed (1200000), bpw (9), mode (0)
<6>[ 1.299918] [4: swapper/0: 1] [mdss] ss_spi_probe : --
<6>[ 1.300664] [4: swapper/0: 1] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>[ 1.302983] [4: swapper/0: 1] libphy: Fixed MDIO Bus: probed
<6>[ 1.303140] [4: swapper/0: 1] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.303311] [4: swapper/0: 1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 1.303579] [4: swapper/0: 1] PPP generic driver version 2.4.2
<6>[ 1.303802] [4: swapper/0: 1] PPP BSD Compression module registered
<6>[ 1.303967] [4: swapper/0: 1] PPP Deflate Compression module registered
<6>[ 1.304171] [4: swapper/0: 1] PPP MPPE Compression module registered
<6>[ 1.304340] [4: swapper/0: 1] NET: Registered protocol family 24
<6>[ 1.304748] [4: swapper/0: 1] usbcore: registered new interface driver rtl8150
<6>[ 1.304952] [4: swapper/0: 1] usbcore: registered new interface driver r8152
<6>[ 1.305166] [4: swapper/0: 1] usbcore: registered new interface driver asix
<6>[ 1.305371] [4: swapper/0: 1] usbcore: registered new interface driver ax88179_178a
<6>[ 1.305582] [4: swapper/0: 1] usbcore: registered new interface driver cdc_ether
<6>[ 1.305786] [4: swapper/0: 1] usbcore: registered new interface driver cdc_eem
<6>[ 1.305996] [4: swapper/0: 1] usbcore: registered new interface driver smsc75xx
<6>[ 1.306232] [4: swapper/0: 1] usbcore: registered new interface driver smsc95xx
<6>[ 1.306436] [4: swapper/0: 1] usbcore: registered new interface driver net1080
<6>[ 1.306638] [4: swapper/0: 1] usbcore: registered new interface driver cdc_subset
<6>[ 1.306850] [4: swapper/0: 1] usbcore: registered new interface driver zaurus
<6>[ 1.307059] [4: swapper/0: 1] usbcore: registered new interface driver cdc_ncm
<6>[ 1.307263] [4: swapper/0: 1] usbcore: registered new interface driver cdc_mbim
<4>[ 1.307451] [4: swapper/0: 1] CHRDEV "uio" major number 229 goes below the dynamic allocation range
<6>[ 1.308987] [4: kworker/4:1: 120] msm_sharedmem: sharedmem_register_qmi: qmi init successful
<3>[ 1.313706] [0: kworker/u16:1: 75] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
<6>[ 1.315024] [4: swapper/0: 1] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
<3>[ 1.316681] [4: swapper/0: 1] msm-usb-ssphy-qmp 88e8000.ssphy: no FPC re-drive ldo regulator
<3>[ 1.320327] [4: swapper/0: 1] msm-dwc3 a600000.ssusb: USB core frequency = 133333333
<3>[ 1.320738] [4: swapper/0: 1] msm-dwc3 a600000.ssusb: setting lpm_to_suspend_delay to zero.
<3>[ 1.322430] [1: swapper/0: 1] msm-dwc3 a600000.ssusb: missing TCSR memory resource
<3>[ 1.322876] [1: swapper/0: 1] msm-dwc3 a600000.ssusb: unable to get dbm device
<6>[ 1.324833] [0: swapper/0: 1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.325037] [0: swapper/0: 1] ehci-pci: EHCI PCI platform driver
<6>[ 1.325222] [0: swapper/0: 1] ehci-platform: EHCI generic platform driver
<6>[ 1.325816] [0: swapper/0: 1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.326036] [0: swapper/0: 1] ohci-pci: OHCI PCI platform driver
<6>[ 1.326224] [0: swapper/0: 1] ohci-platform: OHCI generic platform driver
<6>[ 1.327513] [0: swapper/0: 1] usbcore: registered new interface driver cdc_acm
<6>[ 1.327695] [0: swapper/0: 1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 1.327960] [0: swapper/0: 1] usbcore: registered new interface driver usblp
<6>[ 1.328159] [0: swapper/0: 1] usbcore: registered new interface driver cdc_wdm
<6>[ 1.328387] [0: swapper/0: 1] usbcore: registered new interface driver usb-storage
<6>[ 1.328655] [0: swapper/0: 1] usbcore: registered new interface driver usbserial
<6>[ 1.328860] [0: swapper/0: 1] usbcore: registered new interface driver ftdi_sio
<6>[ 1.329067] [0: swapper/0: 1] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 1.329303] [0: swapper/0: 1] usbcore: registered new interface driver pl2303
<6>[ 1.329500] [0: swapper/0: 1] usbserial: USB Serial support registered for pl2303
<6>[ 1.329720] [0: swapper/0: 1] usbcore: registered new interface driver usb_ehset_test
<4>[ 1.330155] [0: swapper/0: 1] CHRDEV "ttyGS" major number 228 goes below the dynamic allocation range
<6>[ 1.332079] [0: swapper/0: 1] usb_notify: external_notifier_init
<6>[ 1.332237] [0: swapper/0: 1] usb_notify: create_external_notify
<6>[ 1.332563] [0: swapper/0: 1] mousedev: PS/2 mouse device common for all mice
<6>[ 1.333058] [0: swapper/0: 1] usbcore: registered new interface driver xpad
<6>[ 1.333262] [0: swapper/0: 1] usbcore: registered new interface driver usb_acecad
<6>[ 1.333473] [0: swapper/0: 1] usbcore: registered new interface driver aiptek
<6>[ 1.333675] [0: swapper/0: 1] usbcore: registered new interface driver gtco
<6>[ 1.333886] [0: swapper/0: 1] usbcore: registered new interface driver hanwang
<6>[ 1.334091] [0: swapper/0: 1] usbcore: registered new interface driver kbtab
<3>[ 1.334273] [0: swapper/0: 1] [sec_input] sec_ts_init
<6>[ 1.335281] [0: swapper/0: 1] sapa_load_alarm: alarm_reg=01, pmic=1580518861
<6>[ 1.335747] [0: swapper/0: 1] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: rtc core: registered qpnp_rtc as rtc0
<6>[ 1.336453] [0: swapper/0: 1] power_on_alarm driver init
<6>[ 1.336598] [0: swapper/0: 1] i2c /dev entries driver
<6>[ 1.337601] [0: swapper/0: 1] i2c_geni 88c000.i2c: Bus frequency not specified, default to 400KHz.
<6>[ 1.339654] [0: swapper/0: 1] i2c_geni 890000.i2c: Bus frequency not specified, default to 400KHz.
<6>[ 1.340830] [0: swapper/0: 1] i2c_geni 89c000.i2c: Bus frequency not specified, default to 400KHz.
<6>[ 1.341879] [0: swapper/0: 1] i2c_geni a88000.i2c: Bus frequency not specified, default to 400KHz.
<6>[ 1.343311] [0: swapper/0: 1] i2c_geni a8c000.i2c: Bus frequency not specified, default to 400KHz.
<6>[ 1.344200] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_probe
<3>[ 1.344389] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_parse_dt: Failed to get tsp-icid gpio
<6>[ 1.344675] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_parse_dt: irq_type property:2008, 8200
<3>[ 1.344910] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_parse_dt: Failed to get tsp-id gpio
<6>[ 1.345149] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_parse_dt: lcdtype 0x00912047
<6>[ 1.345452] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_parse_dt: force_sensor_version : 1
<6>[ 1.345695] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_parse_dt : zone's size - indicator:133, navigation:266, edge:341
<3>[ 1.345978] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_parse_dt: Failed to get model_info-hw_rev property
<3>[ 1.346243] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_parse_dt: i2c buffer limit: 64, lcd_id:912047, bringup:0, FW:tsp_sec/y771_crown.fw(3), id:-2,-2, mis_cal:1 dex:1, gesture:0 pressure:Y max(4095/4095)
<3>[ 1.346685] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_tclm_parse_dt: tclm_level 2, sec_afe_base 770
<6>[ 1.346967] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_probe: init resource
<6>[ 1.347169] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_pinctrl_configure: ACTIVE
<3>[ 1.354177] [1: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_power: on: avdd:on, dvdd:on
<6>[ 1.358762] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_wait_for_ready: 09, 00, 10, 00, 00, 00, 00, 00 [0]
<6>[ 1.359017] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_probe: power enable
<6>[ 1.359739] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_probe: TOUCH DEVICE ID : 53, 45, 37, 71, 00
<6>[ 1.375908] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_probe: TOUCH STATUS : 20 || 00, 03, 00, 00
<6>[ 1.376657] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_read_calibration_report: count:12, pass count:12, fail count:0, status:0xA2
<6>[ 1.376959] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_firmware_update_on_probe: initial firmware update tsp_sec/y771_crown.fw, cal:A2
<6>[ 1.377273] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_firmware_update_on_probe: request firmware done! size = 186764
<6>[ 1.377554] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_save_version_of_bin: img_ver of bin = 17.49.3.11
<6>[ 1.377804] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_save_version_of_bin: core_ver of bin = 17.49.3.7
<6>[ 1.378053] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_save_version_of_bin: config_ver of bin = 17.49.3.2
<6>[ 1.379232] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_save_version_of_ic: IC Image version info : 17.49.3.13
<6>[ 1.379990] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_save_version_of_ic: IC Core version info : 17.49.3.7,
<6>[ 1.380940] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_save_version_of_ic: IC config version info : 17.49.3.2
<6>[ 1.381245] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_firmware_update_on_probe: skip - fw update
<6>[ 1.382132] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_read_information: AC, 37, 71
<6>[ 1.383229] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_read_information: nTX:17, nRX:35, rX:4095, rY:4095, dX:1439, dY:2959
<6>[ 1.384098] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_read_information: STATUS : 20
<6>[ 1.384966] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_read_information: TOUCH STATUS : 00, 03, 00, 00
<6>[ 1.385805] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_read_information: Functions : 61
<6>[ 1.386422] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_probe: set force sensor version 1
<6>[ 1.387599] [0: swapper/0: 1] input: sec_touchscreen as /devices/platform/soc/a8c000.i2c/i2c-30/30-0048/input/input2
<3>[ 1.387906] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_input_open not finished info work
<6>[ 1.388496] [0: swapper/0: 1] input: sec_touchpad as /devices/platform/soc/a8c000.i2c/i2c-30/30-0048/input/input3
<6>[ 1.388943] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_probe: request_irq = 351
<6>[ 1.389798] [1: swapper/0: 1] sec_ts 30-0048: [sec_input] secure_touch_init
<6>[ 1.390277] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 3 0 0 0
<6>[ 1.390528] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: Normal changed
<6>[ 1.391056] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_check_custom_library: (2) N960, || 00, 04, 00, 0B, || 10, 00
<3>[ 1.391350] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_check_custom_library: use SPONGE
<3>[ 1.391585] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_set_custom_library: Sponge (0x40)
<6>[ 1.395309] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_read_evt_info: evt:1, [0x06080603 0D0AFFFF]
<3>[ 1.395650] [0: swapper/0: 1] sec_ts 30-0048: [sec_input] sec_ts_probe: done
<6>[ 1.396283] [0: swapper/0: 1] i2c_geni a90000.i2c: Bus frequency not specified, default to 400KHz.
<6>[ 1.397378] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] boot_addr: 0x9, origin: (0,0), max_coords: (14563,7085), max_pressure: 4095, max_height: 255, max_tilt: (63,63) project_name: (CROWN,N960), invert: (1,0,1), fw_path: epen/w9018_crown.fw, ic_type: 9018, enabled virtual softkey, enabled garage, support_dex:1, dex_rate:10, table_swap:1
<6>[ 1.398251] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] power enabled
<3>[ 1.398590] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] wacom_power: 3.3V is enabled FALSE
<3>[ 1.399145] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] wacom_power: vddo is enabled[OK]
<3>[ 1.418037] [0: kworker/u16:1: 75] ufshcd-qcom 1d84000.ufshc: LT: 0xaa
<3>[ 1.431458] [0: kworker/u16:1: 75] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
<5>[ 1.433926] [2: kworker/u16:1: 75] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0002 PQ: 0 ANSI: 6
<5>[ 1.437857] [0: kworker/u16:1: 75] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0002 PQ: 0 ANSI: 6
<6>[ 1.440244] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] get_tsp_nvm_data_by_size: offset:0, length:29, size:8
<5>[ 1.442443] [0: kworker/u16:1: 75] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0002 PQ: 0 ANSI: 6
<5>[ 1.448291] [1: kworker/u16:0: 6] scsi 0:0:0:0: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0002 PQ: 0 ANSI: 6
<5>[ 1.451703] [1: kworker/u16:0: 6] scsi 0:0:0:1: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0002 PQ: 0 ANSI: 6
<5>[ 1.454809] [2: kworker/u16:0: 6] scsi 0:0:0:2: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0002 PQ: 0 ANSI: 6
<5>[ 1.458357] [2: kworker/u16:0: 6] scsi 0:0:0:3: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0002 PQ: 0 ANSI: 6
<6>[ 1.462256] [0: kworker/u16:2: 304] sd 0:0:0:0: [sda] sd_revalidate_disk
<6>[ 1.465074] [3: kworker/u16:4: 322] sd 0:0:0:1: [sdb] sd_revalidate_disk
<6>[ 1.469446] [1: kworker/u16:0: 6] sd 0:0:0:2: [sdc] sd_revalidate_disk
<6>[ 1.470206] [0: kworker/u16:3: 317] sd 0:0:0:3: [sdd] sd_revalidate_disk
<6>[ 1.501979] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] wacom_i2c_query: 0th ret of wacom query=29
<6>[ 1.502199] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] F, 38, E3, 1B, AD, F, FF, 40, 29, 42, 3, 3F, 3F, FF, 2
<6>[ 1.502428] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] use_dt_coord=0, max_x=14563 max_y=7085, max_pressure=4095
<6>[ 1.502713] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] fw_version=0x4029
<6>[ 1.502885] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] mpu 0x42, bl 0x3, tx 63, ty 63, h 255
<6>[ 1.504219] [0: swapper/0: 1] input: sec_e-pen as /devices/platform/soc/a90000.i2c/i2c-31/31-0056/input/input4
<6>[ 1.504526] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] wacom_i2c_input_open(sec_e-pen)
<3>[ 1.504894] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] wacom_i2c_input_open : not finished probing
<6>[ 1.506072] [0: swapper/0: 1] input: sec_e-pen-pad as /devices/platform/soc/a90000.i2c/i2c-31/31-0056/input/input5
<6>[ 1.506380] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] wacom_i2c_input_open(sec_e-pen-pad)
<3>[ 1.506661] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] wacom_i2c_input_open : not finished probing
<6>[ 1.507652] [0: swapper/0: 1] input: sec_virtual-e-pen as /devices/platform/soc/a90000.i2c/i2c-31/31-0056/input/input6
<6>[ 1.507968] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] wacom_i2c_input_open(sec_virtual-e-pen)
<3>[ 1.508258] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] wacom_i2c_input_open : not finished probing
<6>[ 1.509488] [1: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] init irq 271
<6>[ 1.510439] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] init pdct 344
<6>[ 1.511081] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] wacom_fw_update
<6>[ 1.511354] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] load_fw_built_in: load_fw_built_in (1)
<6>[ 1.511663] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] wacom fw ver : 0x4029, new fw ver : 0x4029
<6>[ 1.511961] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] pass fw update
<6>[ 1.512692] [0: swapper/0: 1] wacom_w90xx 31-0056: [sec_input] probe done
<6>[ 1.514408] [0: swapper/0: 1] i2c_geni a98000.i2c: Bus frequency not specified, default to 400KHz.
<6>[ 1.516348] [0: swapper/0: 1] max77705:max77705_i2c_probe
<6>[ 1.516607] [0: swapper/0: 1] of_max77705_dt: irq-gpio: 2037
<6>[ 1.524830] [0: kworker/0:0: 4] usb: [M] manager_notifier_register: listener=27 register
<6>[ 1.525073] [0: kworker/0:0: 4] usb: [M] manager_notifier_init
<6>[ 1.525253] [0: kworker/0:0: 4] ccic_notifier_init
<6>[ 1.525409] [0: kworker/0:0: 4] ccic_core_init
<6>[ 1.525766] [0: kworker/0:0: 4] usb_notify: usb_external_notify_register: listener=(undefined)3 register
<6>[ 1.526033] [0: kworker/0:0: 4] vbus_notifier_register: listener=2 register
<6>[ 1.526245] [0: kworker/0:0: 4] usb: [M] manager_handle_vbus_notification: cmd=0, vbus_type=LOW, WATER DET=0 ATTACH=DETATCH (0)
<6>[ 1.526543] [0: kworker/0:0: 4] ccic_notifier_register: listener=6 register
<6>[ 1.526757] [0: kworker/0:0: 4] usb: [M] manager_handle_ccic_notification: src:INITIAL dest:INITIAL id:ID_INITIAL attach/rid:0
<6>[ 1.527060] [0: kworker/0:0: 4] usb: [M] manager_notifier_notify: src:INITIAL dest:INITIAL id:ID_INITIAL sub1:00 sub2:00 sub3:00
<6>[ 1.527410] [0: kworker/0:0: 4] usb_notify: register_usblog_proc size=22592
<6>[ 1.527617] [0: kworker/0:0: 4] usb: [M] manager_notifier_notify: notify done(0x0)
<6>[ 1.527835] [0: kworker/0:0: 4] muic_notifier_register: listener=7 register
<6>[ 1.528041] [0: kworker/0:0: 4] usb: [M] manager_handle_muic_notification: attach:0, cable_type:69
<6>[ 1.528287] [0: kworker/0:0: 4] usb: [M] manager_handle_muic_notification:attach:0, ccic_drp_state=0, ccic_rid_state:0
<6>[ 1.528569] [0: kworker/0:0: 4] usb: [M] manager_handle_muic_notification: Cable(69) Detached
<6>[ 1.528806] [0: kworker/0:0: 4] usb: [M] manager_notifier_notify: src:MUIC dest:BATTERY id:ID_ATTACH sub1:00 sub2:00 sub3:45
<6>[ 1.529099] [0: kworker/0:0: 4] usb: [M] manager_notifier_notify: notify done(0x0)
<6>[ 1.529315] [0: kworker/0:0: 4] manager_notifier_init : result of register = 0!
<6>[ 1.529522] [0: kworker/0:0: 4] manager_notifier_init : done!
<6>[ 1.529695] [0: kworker/0:0: 4] usb: [M] manager_notifier_init end
<6>[ 1.529876] [0: kworker/0:0: 4] ccic_notifier_init
<3>[ 1.530086] [0: kworker/0:0: 4] ccic_notifier_init already registered
<3>[ 1.530289] [0: kworker/0:0: 4] wacom_w90xx 31-0056: [sec_input] wacom_usb_typec_nb_register_work: success
<6>[ 1.533390] [0: swapper/0: 1] max77705:max77705_i2c_probe device found: rev.0x3, ver.0x0
<6>[ 1.537551] [0: swapper/0: 1] max77705: max77705_usbc_fw_update: chip : 32.00, FW : 31.00
<6>[ 1.537791] [0: swapper/0: 1] max77705: max77705_usbc_fw_update: Don't need to update!
<6>[ 1.538231] [0: swapper/0: 1] max77705:max77705_irq_init irq=42, irq->gpio=2037
<6>[ 1.602632] [2: swapper/0: 1] max77705:max77705_irq_init max77705_PMIC_REG_INTSRC_MASK=0xfe
<7>[ 1.607826] [2: swapper/0: 1] initcall geni_i2c_driver_init+0x0/0x20 returned 0 after 264156 usecs
<6>[ 1.617586] [1: swapper/0: 1] iommu: Adding device aa00000.qcom,vidc:non_secure_cb to group 21
<6>[ 1.619854] [2: swapper/0: 1] iommu: Adding device aa00000.qcom,vidc:secure_bitstream_cb to group 22
<6>[ 1.624194] [1: swapper/0: 1] iommu: Adding device aa00000.qcom,vidc:secure_pixel_cb to group 23
<6>[ 1.627930] [2: swapper/0: 1] iommu: Adding device aa00000.qcom,vidc:secure_non_pixel_cb to group 24
<3>[ 1.637024] [1: swapper/0: 1] [cam_req_mgr_probe] name : crm_timer
<6>[ 1.640599] [1: swapper/0: 1] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_ife to group 25
<6>[ 1.641335] [1: swapper/0: 1] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_jpeg to group 26
<6>[ 1.641921] [1: swapper/0: 1] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved memory node camera_region
<6>[ 1.642742] [1: swapper/0: 1] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_icp to group 27
<3>[ 1.643300] [1: swapper/0: 1] CAM_ERR: CAM-SMMU: cam_smmu_get_memory_regions_info: 3161 Incorrect region id present in DT file: 5
<6>[ 1.643765] [1: swapper/0: 1] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm to group 28
<6>[ 1.644885] [1: swapper/0: 1] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_fd to group 29
<6>[ 1.645578] [1: swapper/0: 1] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_lrme to group 30
<3>[ 1.649105] [0: swapper/0: 1] register_client_adhoc:find path.src 1 dest 589
<3>[ 1.650486] [0: swapper/0: 1] register_client_adhoc:Client handle 25 cam_ahb
<3>[ 1.651150] [0: swapper/0: 1] register_client_adhoc:find path.src 136 dest 512
<3>[ 1.651907] [0: swapper/0: 1] register_client_adhoc:Client handle 26 cam_hf_1_mnoc
<3>[ 1.652630] [0: swapper/0: 1] register_client_adhoc:find path.src 146 dest 778
<3>[ 1.652992] [0: swapper/0: 1] register_client_adhoc:Client handle 27 cam_hf_1_camnoc
<3>[ 1.653302] [0: swapper/0: 1] register_client_adhoc:find path.src 145 dest 512
<3>[ 1.654005] [0: swapper/0: 1] register_client_adhoc:Client handle 28 cam_hf_2_mnoc
<3>[ 1.654695] [0: swapper/0: 1] register_client_adhoc:find path.src 147 dest 778
<3>[ 1.655031] [0: swapper/0: 1] register_client_adhoc:Client handle 29 cam_hf_2_camnoc
<3>[ 1.655339] [0: swapper/0: 1] register_client_adhoc:find path.src 137 dest 512
<3>[ 1.656072] [0: swapper/0: 1] register_client_adhoc:Client handle 30 cam_sf_1_mnoc
<3>[ 1.656795] [0: swapper/0: 1] register_client_adhoc:find path.src 148 dest 778
<3>[ 1.657126] [0: swapper/0: 1] register_client_adhoc:Client handle 31 cam_sf_1_camnoc
<6>[ 1.673088] [0: swapper/0: 1] CAM_INFO: CAM-ISP: cam_vfe_init_hw: 262 cam_vfe_init_hw:Enter RefCnt: 1, vfe_hw: 0xffffffc167808000
<6>[ 1.673088] [0: swapper/0: 1]
<6>[ 1.675951] [0: swapper/0: 1] CAM_INFO: CAM-ISP: cam_vfe_reset: 415 calling RESET on vfe 0
<6>[ 1.676149] [0: swapper/0: 1] CAM_INFO: CAM-ISP: cam_vfe_reset: 415 calling RESET on vfe 0
<6>[ 1.677636] [0: swapper/0: 1] CAM_INFO: CAM-ISP: cam_vfe_init_hw: 262 cam_vfe_init_hw:Enter RefCnt: 1, vfe_hw: 0xffffffc167809000
<6>[ 1.677636] [0: swapper/0: 1]
<6>[ 1.680462] [0: swapper/0: 1] CAM_INFO: CAM-ISP: cam_vfe_reset: 415 calling RESET on vfe 1
<6>[ 1.680638] [0: swapper/0: 1] CAM_INFO: CAM-ISP: cam_vfe_reset: 415 calling RESET on vfe 1
<3>[ 1.682322] [0: swapper/0: 1] CAM_ERR: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 256 No clk named ife_dsp_clk found. Dev acc4000.qcom,vfe-lite
<4>[ 1.682684] [0: swapper/0: 1] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 107 option clk get failed
<6>[ 1.683291] [0: swapper/0: 1] CAM_INFO: CAM-ISP: cam_vfe_init_hw: 262 cam_vfe_init_hw:Enter RefCnt: 1, vfe_hw: 0xffffffc16780a000
<6>[ 1.683291] [0: swapper/0: 1]
<6>[ 1.686030] [0: swapper/0: 1] CAM_INFO: CAM-ISP: cam_vfe_reset: 415 calling RESET on vfe 2
<6>[ 1.686202] [0: swapper/0: 1] CAM_INFO: CAM-ISP: cam_vfe_reset: 415 calling RESET on vfe 2
<3>[ 1.688577] [0: swapper/0: 1] CAM_ERR: CAM-ISP: cam_tasklet_dequeue_cmd: 161 Tasklet is not active!
<3>[ 1.688855] [0: swapper/0: 1] CAM_ERR: CAM-ISP: cam_tasklet_dequeue_cmd: 161 Tasklet is not active!
<3>[ 1.689139] [0: swapper/0: 1] CAM_ERR: CAM-ISP: cam_tasklet_dequeue_cmd: 161 Tasklet is not active!
<3>[ 1.689413] [0: swapper/0: 1] CAM_ERR: CAM-ISP: cam_tasklet_dequeue_cmd: 161 Tasklet is not active!
<3>[ 1.689688] [0: swapper/0: 1] CAM_ERR: CAM-ISP: cam_tasklet_dequeue_cmd: 161 Tasklet is not active!
<3>[ 1.689958] [0: swapper/0: 1] CAM_ERR: CAM-ISP: cam_tasklet_dequeue_cmd: 161 Tasklet is not active!
<3>[ 1.690486] [0: swapper/0: 1] CAM_ERR: CAM-ISP: cam_tasklet_dequeue_cmd: 161 Tasklet is not active!
<3>[ 1.691054] [0: swapper/0: 1] CAM_ERR: CAM-ISP: cam_tasklet_dequeue_cmd: 161 Tasklet is not active!
<6>[ 1.691689] [0: swapper/0: 1] CAM_INFO: CAM-ISP: cam_isp_dev_probe: 156 Camera ISP probe complete
<6>[ 1.693498] [0: swapper/0: 1] Success to find SVC_sd : 0x0000000000000000 SVC : 0x0000000000000000
<6>[ 1.693744] [0: swapper/0: 1] Success to create sys/devices/svc/Camera : 0x0000000000000000
<3>[ 1.694712] [0: swapper/0: 1] cam_mipi_register_ril_notifier: [dynamic_mipi] register ril notifier
<6>[ 1.697781] [0: swapper/0: 1] CAM_INFO: CAM: cam_res_mgr_probe: 673 Enable shared gpio support.
<4>[ 1.705104] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: actuator
<4>[ 1.705376] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: actuator
<6>[ 1.705672] [0: swapper/0: 1] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 58 No GPIO found
<4>[ 1.706229] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: actuator
<4>[ 1.706498] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: actuator
<6>[ 1.706782] [0: swapper/0: 1] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 58 No GPIO found
<4>[ 1.707103] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: actuator
<4>[ 1.707370] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: actuator
<6>[ 1.707654] [0: swapper/0: 1] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 58 No GPIO found
<4>[ 1.708768] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: ac4a000.qcom,cci:qcom,cam-sensor@0
<4>[ 1.709086] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: ac4a000.qcom,cci:qcom,cam-sensor@0
<4>[ 1.709904] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: ac4a000.qcom,cci:qcom,cam-sensor@1
<4>[ 1.710273] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: ac4a000.qcom,cci:qcom,cam-sensor@1
<4>[ 1.710754] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: ac4a000.qcom,cci:qcom,cam-sensor@2
<4>[ 1.711073] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: ac4a000.qcom,cci:qcom,cam-sensor@2
<4>[ 1.711728] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: ac4a000.qcom,cci:qcom,cam-sensor@4
<4>[ 1.712045] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: ac4a000.qcom,cci:qcom,cam-sensor@4
<4>[ 1.712906] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: cam-sensor
<4>[ 1.713180] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: cam-sensor
<4>[ 1.714395] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: 0.qcom,camera-flash
<4>[ 1.714868] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: 0.qcom,camera-flash
<6>[ 1.715213] [0: swapper/0: 1] CAM_INFO: CAM-FLASH: cam_flash_get_dt_data: 221 No GPIO found
<4>[ 1.715865] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: 1.qcom,camera-flash
<4>[ 1.716174] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: 1.qcom,camera-flash
<6>[ 1.716507] [0: swapper/0: 1] CAM_INFO: CAM-FLASH: cam_flash_get_dt_data: 221 No GPIO found
<3>[ 1.716895] [0: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: pin GPIO_21 already requested by 0.qcom,camera-flash; cannot claim for 1.qcom,camera-flash
<3>[ 1.717273] [0: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: pin-21 (1.qcom,camera-flash) status -22
<3>[ 1.717546] [0: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: could not request pin 21 (GPIO_21) from group gpio21 on device 3400000.pinctrl
<3>[ 1.717890] [0: swapper/0: 1] CAM-FLASH-DRIVER 1.qcom,camera-flash: Error applying setting, reverse things back
<3>[ 1.718174] [0: swapper/0: 1] CAM_ERR: CAM-FLASH: cam_flash_platform_probe: 407 Cannot set pin to suspend state
<4>[ 1.718480] [0: swapper/0: 1] CAM-FLASH-DRIVER: probe of 1.qcom,camera-flash failed with error -22
<4>[ 1.718895] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: 2.qcom,camera-flash
<4>[ 1.719211] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: 2.qcom,camera-flash
<6>[ 1.720662] [0: kworker/0:2: 315] wacom_w90xx 31-0056: [sec_input] received checksum 1f, b1, c5, cc, 69
<6>[ 1.720934] [0: kworker/0:2: 315] wacom_w90xx 31-0056: [sec_input] crc ok, do not update
<4>[ 1.721441] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: eeprom
<4>[ 1.721728] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: eeprom
<3>[ 1.722051] [0: swapper/0: 1] CAM_ERR: CAM-EEPROM: cam_eeprom_parse_dt: 243 VR:: MM Support 1
<6>[ 1.722292] [0: swapper/0: 1] CAM_INFO: CAM-EEPROM: cam_eeprom_parse_dt: 258 eepromName: (null)
<3>[ 1.722531] [0: swapper/0: 1] CAM_ERR: CAM-EEPROM: cam_eeprom_parse_dt: 261 kernel probe is not enabled
<6>[ 1.722791] [0: swapper/0: 1] CAM_INFO: CAM-EEPROM: cam_eeprom_parse_dt: 266 VR:: Cell Index: 0 Userspace_probe: 1
<6>[ 1.723076] [0: swapper/0: 1] CAM_INFO: CAM-EEPROM: cam_eeprom_get_dt_data: 150 No GPIO found
<4>[ 1.723487] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: eeprom
<4>[ 1.723776] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: eeprom
<3>[ 1.724060] [0: swapper/0: 1] CAM_ERR: CAM-EEPROM: cam_eeprom_parse_dt: 243 VR:: MM Support 0
<6>[ 1.724278] [0: swapper/0: 1] CAM_INFO: CAM-EEPROM: cam_eeprom_parse_dt: 258 eepromName: (null)
<3>[ 1.724496] [0: swapper/0: 1] CAM_ERR: CAM-EEPROM: cam_eeprom_parse_dt: 261 kernel probe is not enabled
<6>[ 1.724729] [0: swapper/0: 1] CAM_INFO: CAM-EEPROM: cam_eeprom_parse_dt: 266 VR:: Cell Index: 1 Userspace_probe: 1
<6>[ 1.724981] [0: swapper/0: 1] CAM_INFO: CAM-EEPROM: cam_eeprom_get_dt_data: 150 No GPIO found
<4>[ 1.725843] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: ois
<4>[ 1.726100] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: ois
<4>[ 1.727040] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: aperture
<4>[ 1.727304] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: aperture
<6>[ 1.727589] [0: swapper/0: 1] CAM_INFO: CAM-APERTURE: cam_aperture_parse_dt: 57 No GPIO found
<4>[ 1.729290] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: soc:qcom,ipe0
<4>[ 1.729566] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: soc:qcom,ipe0
<4>[ 1.730111] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: soc:qcom,ipe1
<4>[ 1.730384] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: soc:qcom,ipe1
<4>[ 1.731361] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 864 no reg-names found for: soc:qcom,bps
<4>[ 1.731635] [0: swapper/0: 1] CAM_WARN: CAM-UTIL: cam_soc_util_get_dt_properties: 901 No interrupt line preset for: soc:qcom,bps
<3>[ 1.738026] [1: swapper/0: 1] CAM_ERR: CAM-SMMU: cam_smmu_create_add_handle_in_table: 607 Error: cam-secure already got handle 0x42cb0
<3>[ 1.738606] [1: swapper/0: 1] CAM_ERR: CAM-ICP: msm_bus_dbg_mas_set: 83 Set DCD: 0
<6>[ 1.742420] [0: swapper/0: 1] CAM_INFO: CAM-JPEG: cam_jpeg_dev_probe: 119 Camera JPEG probe complete
<6>[ 1.752787] [0: swapper/0: 1] I2C radio driver for rtc6213n FM Tuner, Version 1.0.1
<6>[ 1.753002] [0: swapper/0: 1] I2C radio driver for rtc6213n FM Tuner, Version 1.0.1
<6>[ 1.974536] [1: kworker/u16:2: 304] sd 0:0:0:0: [sda] sd_revalidate_disk
<6>[ 1.974719] [2: kworker/u16:4: 322] sd 0:0:0:1: [sdb] sd_revalidate_disk
<6>[ 1.981697] [3: kworker/u16:3: 317] sd 0:0:0:3: [sdd] sd_revalidate_disk
<6>[ 1.981947] [1: kworker/u16:0: 6] sd 0:0:0:2: [sdc] sd_revalidate_disk
<6>[ 1.984082] [2: kworker/u16:4: 322] sdb: sdb1 sdb2
<6>[ 1.986580] [1: kworker/u16:4: 322] sd 0:0:0:1: [sdb] sd_revalidate_disk
<6>[ 1.987088] [2: kworker/u16:2: 304] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29
<6>[ 1.990896] [3: kworker/u16:0: 6] sdc: sdc1 sdc2
<6>[ 1.992516] [0: kworker/u16:3: 317] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15 sdd16 sdd17 sdd18 sdd19 sdd20 sdd21 sdd22 sdd23 sdd24 sdd25 sdd26
<6>[ 1.993156] [1: kworker/u16:0: 6] sd 0:0:0:2: [sdc] sd_revalidate_disk
<5>[ 1.995602] [2: kworker/u16:2: 304] sd 0:0:0:0: [sda] UFS data logging enabled
<5>[ 1.995835] [2: kworker/u16:2: 304] sd 0:0:0:0: [sda] UFS system partition, from : 1022016, to 11663424
<6>[ 1.996520] [2: kworker/u16:2: 304] sd 0:0:0:0: [sda] sd_revalidate_disk
<3>[ 2.000322] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_tclm_data_read: 1 775 2 1
<6>[ 2.000789] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_tclm_check_cal_case: cal_count value [1]
<6>[ 2.001072] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] get_tsp_nvm_data_by_size: offset:0, length:29, size:8
<6>[ 2.005584] [3: kworker/u16:3: 317] sd 0:0:0:3: [sdd] sd_revalidate_disk
<3>[ 2.560196] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_tclm_data_read: 1 775 2 1
<6>[ 2.560482] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_tclm_get_nvm_all: cal_count:1, pos:4(LCIA), hist_count:2, lastp:1
<6>[ 2.560832] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_tclm_position_history: [Now] LCIA1
<6>[ 2.561101] [0: kworker/0:1: 73] [sec_input] sec_tclm_position_history: [Old] F1O4
<6>[ 2.561368] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_read_info_work: sec_tclm_check_cal_case ret: 0
<6>[ 2.565171] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 1
<6>[ 2.565474] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: Normal changed
<6>[ 2.565750] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 2 0 0
<6>[ 2.566041] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: sleep changed
<4>[ 2.630128] [4: swapper/0: 1] rtc6213n: probe of 20-0064 failed with error -5
<7>[ 2.630447] [4: swapper/0: 1] initcall rtc6213n_init+0x0/0x20 returned 0 after 857066 usecs
<3>[ 2.631841] [4: swapper/0: 1] sec_therm_probe: ret(-517)
<6>[ 2.631979] [4: swapper/0: 1] sec_therm_probe: qpnp_get_vadc is fail : ret(-517)
<3>[ 2.632203] [4: swapper/0: 1] sec_therm_probe: ret(-517)
<6>[ 2.632341] [4: swapper/0: 1] sec_therm_probe: qpnp_get_vadc is fail : ret(-517)
<3>[ 2.632779] [4: swapper/0: 1] sec_therm_probe: ret(-517)
<6>[ 2.632916] [4: swapper/0: 1] sec_therm_probe: qpnp_get_vadc is fail : ret(-517)
<4>[ 2.647303] [4: swapper/0: 1] 17d41000.qcom,cpucc:qcom,limits-dcvs@0 supply isens_vref not found, using dummy regulator
<3>[ 2.647634] [4: swapper/0: 1] msm_lmh_dcvs:limits_isens_vref_ldo_init Regulator:isens_vref settings read error:-22
<6>[ 2.682077] [4: swapper/0: 1] device-mapper: uevent: version 1.0.3
<6>[ 2.682689] [4: swapper/0: 1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
<6>[ 2.682969] [4: swapper/0: 1] device-mapper: req-crypt: dm-req-crypt successfully initalized.
<6>[ 2.682969] [4: swapper/0: 1]
<3>[ 2.683306] [4: swapper/0: 1] [BT] bcm4361_bluetooth_init
<3>[ 2.684045] [4: swapper/0: 1] [BT] bcm4361_bluetooth_probe
<3>[ 2.684205] [4: swapper/0: 1] [BT] bcm4361 dt_info
<3>[ 2.684391] [4: swapper/0: 1] [BT] bt_en pin is 2029
<6>[ 2.684893] [4: swapper/0: 1] Bluetooth: BlueSleep Mode Driver Ver 1.1
<3>[ 2.685512] [4: swapper/0: 1] bluesleep probe
<3>[ 2.685512] [4: swapper/0: 1] [BT]
<3>[ 2.685798] [4: swapper/0: 1] [BT] hostwake gpio is 108 [BT]
<3>[ 2.685977] [4: swapper/0: 1] [BT] btwake gpio is 136 [BT]
<3>[ 2.686156] [4: swapper/0: 1] [BT] hostwake irq is 339 [BT]
<3>[ 2.686425] [4: swapper/0: 1] [BT] Bluesleep probe success
<6>[ 2.687106] [4: swapper/0: 1] EDAC DEVICE0: Giving out device to module soc:kryo3xx-erp controller cache: DEV soc:kryo3xx-erp (INTERRUPT)
<6>[ 2.688949] [4: swapper/0: 1] sdhci: Secure Digital Host Controller Interface driver
<6>[ 2.689160] [4: swapper/0: 1] sdhci: Copyright(c) Pierre Ossman
<6>[ 2.689332] [4: swapper/0: 1] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 2.689606] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_init
<6>[ 2.690269] [4: swapper/0: 1] [LED] s2mpb02_led_probe 2 leds
<6>[ 2.690444] [4: swapper/0: 1] s2mpb02_led_probe led0 setup ...
<4>[ 2.693862] [1: kworker/u16:3: 317] sdhci_msm 8804000.sdhci: sdhci_msm_probe: ICE device is not enabled
<6>[ 2.694179] [1: kworker/u16:3: 317] pcal6524_gpio_direction_output(off=[0], val=[1])
<3>[ 2.700341] [1: kworker/u16:3: 317] sdhci_msm 8804000.sdhci: tflash is enabled(300).
<3>[ 2.701437] [1: kworker/u16:3: 317] register_client_adhoc:find path.src 81 dest 512
<3>[ 2.703554] [1: kworker/u16:3: 317] register_client_adhoc:find path.src 1 dest 608
<3>[ 2.704715] [4: swapper/0: 1] register_client_adhoc:Client handle 32 sdhc2
<6>[ 2.711051] [4: swapper/0: 1] [s2mpb02_ir_led_current] led current value : 4 [current_value::5]
<6>[ 2.712275] [4: swapper/0: 1] [s2mpb02_ir_led_pulse_width] led pulse_width value : 240
<6>[ 2.712470] [4: swapper/0: 1] [s2mpb02_ir_led_pulse_width] IRON1(0x3c), IRON2(0x0b)
<6>[ 2.714703] [4: swapper/0: 1] [s2mpb02_ir_led_pulse_delay] led pulse_delay value : 0
<6>[ 2.714894] [4: swapper/0: 1] [s2mpb02_ir_led_pulse_delay] IRD1(0x00), IRD2(0x2c)
<6>[ 2.717210] [4: swapper/0: 1] [s2mpb02_ir_led_max_time] led max_time value : 0
<6>[ 2.720753] [1: kworker/u16:3: 317] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using 64-bit ADMA in legacy mode
<6>[ 2.721649] [1: kworker/u16:3: 317] mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 18 width 1 timing 0
<6>[ 2.722035] [4: swapper/0: 1] s2mpb02_led_probe led1 setup ...
<6>[ 2.739261] [4: swapper/0: 1] [s2mpb02_ir_led_current] led current value : 4 [current_value::5]
<6>[ 2.740509] [4: swapper/0: 1] [s2mpb02_ir_led_pulse_width] led pulse_width value : 240
<6>[ 2.740709] [0: kworker/u16:3: 317] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 1 timing 0
<6>[ 2.740961] [4: swapper/0: 1] [s2mpb02_ir_led_pulse_width] IRON1(0x3c), IRON2(0x0b)
<6>[ 2.743085] [4: swapper/0: 1] [s2mpb02_ir_led_pulse_delay] led pulse_delay value : 0
<6>[ 2.743274] [4: swapper/0: 1] [s2mpb02_ir_led_pulse_delay] IRD1(0x00), IRD2(0x2c)
<6>[ 2.745410] [4: swapper/0: 1] [s2mpb02_ir_led_max_time] led max_time value : 0
<3>[ 2.750184] [4: swapper/0: 1] <s2mpb02_led_probe> end
<6>[ 2.750360] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_init
<6>[ 2.750786] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_probe
<6>[ 2.750993] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt
<6>[ 2.753302] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, led_b
<6>[ 2.753527] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, led_r
<6>[ 2.753757] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, led_g
<6>[ 2.753989] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, led_w
<6>[ 2.754222] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, led_device_type = 0
<6>[ 2.754493] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, normal_powermode_current = a
<6>[ 2.754771] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, low_powermode_current = a
<6>[ 2.755053] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, brightness_ratio_r = 226
<6>[ 2.755325] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, brightness_ratio_g = 3c
<6>[ 2.755600] [0: kworker/0:3: 327] mmc0: mmc_rescan: disable0, entered0, bus OK, card not present.
<6>[ 2.755869] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, brightness_ratio_b = 5a
<6>[ 2.756147] [0: kworker/0:3: 327] mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 18 width 1 timing 0
<6>[ 2.756430] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, brightness_ratio_r_low = 46
<6>[ 2.756715] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, brightness_ratio_g_low = a
<6>[ 2.756986] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_parse_dt, brightness_ratio_b_low = a
<6>[ 2.757257] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_probe : octa_color=0 led_device_type=0
<6>[ 2.757584] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_get
<3>[ 2.757797] [4: swapper/0: 1] leds led_b: max77705_rgb_number() returns -19.
<6>[ 2.758017] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_get
<3>[ 2.758222] [4: swapper/0: 1] leds led_r: max77705_rgb_number() returns -19.
<6>[ 2.758431] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_get
<3>[ 2.758618] [4: swapper/0: 1] leds led_g: max77705_rgb_number() returns -19.
<6>[ 2.758810] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_get
<3>[ 2.758997] [4: swapper/0: 1] leds led_w: max77705_rgb_number() returns -19.
<6>[ 2.759207] [4: swapper/0: 1] leds-max77705-rgb: leds-max77705-rgb: max77705_rgb_probe done
<4>[ 2.759520] [4: swapper/0: 1] CHRDEV "hidraw" major number 227 goes below the dynamic allocation range
<6>[ 2.759765] [4: swapper/0: 1] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 2.760127] [0: kworker/0:3: 327] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 1 timing 0
<4>[ 2.760594] [4: swapper/0: 1] CHRDEV "roccat" major number 225 goes below the dynamic allocation range
<4>[ 2.761003] [4: swapper/0: 1] CHRDEV "ovr" major number 224 goes below the dynamic allocation range
<4>[ 2.761742] [4: swapper/0: 1] CHRDEV "tvr" major number 223 goes below the dynamic allocation range
<6>[ 2.762114] [4: swapper/0: 1] Successfully registered hid_synaptics_driver
<6>[ 2.762389] [4: swapper/0: 1] usbcore: registered new interface driver usbhid
<6>[ 2.762563] [4: swapper/0: 1] usbhid: USB HID core driver
<6>[ 2.762831] [4: swapper/0: 1] ashmem: initialized
<3>[ 2.763040] [4: swapper/0: 1] nf_register_hooks(freecess hooks) success
<6>[ 2.763208] [4: swapper/0: 1] [sec_abc] sec_abc_init
<6>[ 2.763584] [4: swapper/0: 1] [sec_abc] sec_abc_probe
<6>[ 2.763736] [4: swapper/0: 1] sec_abc_probe: parse dt done
<6>[ 2.764298] [4: swapper/0: 1] abc_hub_init
<6>[ 2.764733] [4: swapper/0: 1] abc_hub soc:abc_hub: abc_hub_probe
<6>[ 2.764890] [4: swapper/0: 1] [ABC_COND] ABC_HUB_COND DT Parsing start.
<6>[ 2.765056] [4: swapper/0: 1] [ABC_COND] gpio cnt = : 2
<6>[ 2.765245] [4: swapper/0: 1] [ABC_COND] index[0] : gpio number / name: 51 / ub
<6>[ 2.765442] [4: swapper/0: 1] [ABC_COND] i = [0] gpio level [51] = 0
<6>[ 2.765604] [4: swapper/0: 1] [ABC_COND] index[1] : gpio number / name: 102 / sub
<6>[ 2.765793] [0: kworker/0:3: 327] mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 18 width 1 timing 0
<6>[ 2.766059] [4: swapper/0: 1] [ABC_COND] i = [1] gpio level [102] = 0
<6>[ 2.766219] [4: swapper/0: 1] [ABC_COND] pm gpio cnt = : 1
<6>[ 2.766462] [4: swapper/0: 1] [ABC_COND] gpio_total_count = 3
<6>[ 2.766623] [4: swapper/0: 1] [ABC_COND] index[2] : pm gpio number / name: 2030 / cam
<6>[ 2.766833] [4: swapper/0: 1] [ABC_COND] i = [2], gpio level [2030] = 0
<6>[ 2.766997] [4: swapper/0: 1] [ABC_COND] gpio irq gpio = [2030], irq = [60]
<6>[ 2.767168] [4: swapper/0: 1] [ABC_COND] ABC_HUB_COND DT Parsing done.
<6>[ 2.767335] [4: swapper/0: 1] parse_bootc_data: time_spec(user binary user build) - 100000
<6>[ 2.767530] [4: swapper/0: 1] abc_hub_probe: parse dt done
<6>[ 2.768718] [4: swapper/0: 1] abc_hub_bootc_init: success
<6>[ 2.768859] [4: swapper/0: 1] abc_hub soc:abc_hub: abc_hub_probe success!
<6>[ 2.769716] [0: kworker/0:3: 327] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 1 timing 0
<6>[ 2.769962] [4: swapper/0: 1] ipa_ut ipa_ut_module_init:1044 Loading IPA test module...
<6>[ 2.770325] [4: swapper/0: 1] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
<4>[ 2.773151] [4: swapper/0: 1] CHRDEV "seemplog" major number 222 goes below the dynamic allocation range
<3>[ 2.773708] [4: swapper/0: 1] seemp: seemp_logk_init: SCM call failed with ret val = 0 -3 0
<6>[ 2.774322] [4: swapper/0: 1] bimc-bwmon 1436400.qcom,cpu-bwmon: BW HWmon governor registered.
<6>[ 2.774565] [4: swapper/0: 1] bimc-bwmon 114a000.qcom,llcc-bwmon: BW HWmon governor registered.
<6>[ 2.775689] [4: swapper/0: 1] arm-memlat-mon soc:qcom,cpu0-memlat-mon: Memory Latency governor registered.
<6>[ 2.775946] [4: swapper/0: 1] arm-memlat-mon soc:qcom,cpu4-memlat-mon: Memory Latency governor registered.
<6>[ 2.776202] [4: swapper/0: 1] arm-memlat-mon soc:qcom,cpu0-l3lat-mon: Memory Latency governor registered.
<6>[ 2.776450] [4: swapper/0: 1] arm-memlat-mon soc:qcom,cpu4-l3lat-mon: Memory Latency governor registered.
<6>[ 2.776702] [4: swapper/0: 1] arm-memlat-mon soc:qcom,devfreq-compute: Compute governor registered.
<3>[ 2.777520] [4: swapper/0: 1] register_client_adhoc:find path.src 1 dest 770
<3>[ 2.777881] [4: swapper/0: 1] register_client_adhoc:Client handle 33 soc:qcom,cpubw
<3>[ 2.778707] [4: swapper/0: 1] register_client_adhoc:find path.src 129 dest 512
<3>[ 2.778874] [4: swapper/0: 1] register_client_adhoc:Client handle 34 soc:qcom,llccbw
<3>[ 2.780957] [4: swapper/0: 1] register_client_adhoc:find path.src 1 dest 512
<3>[ 2.781097] [4: swapper/0: 1] register_client_adhoc:Client handle 35 soc:qcom,memlat-cpu0
<3>[ 2.781602] [4: swapper/0: 1] register_client_adhoc:find path.src 1 dest 512
<3>[ 2.781744] [4: swapper/0: 1] register_client_adhoc:Client handle 36 soc:qcom,memlat-cpu4
<3>[ 2.782237] [4: swapper/0: 1] register_client_adhoc:find path.src 139 dest 627
<3>[ 2.782348] [4: swapper/0: 1] register_client_adhoc:Client handle 37 soc:qcom,snoc_cnoc_keepalive
<3>[ 2.782605] [4: swapper/0: 1] register_client_adhoc:find path.src 1 dest 512
<3>[ 2.782740] [4: swapper/0: 1] register_client_adhoc:Client handle 38 soc:qcom,mincpubw
<3>[ 2.783292] [4: swapper/0: 1] register_client_adhoc:find path.src 26 dest 512
<3>[ 2.783397] [4: swapper/0: 1] register_client_adhoc:Client handle 39 soc:qcom,gpubw
<6>[ 2.783949] [4: swapper/0: 1] muic_notifier_init
<6>[ 2.783994] [4: swapper/0: 1] create_coagent_thread:
<6>[ 2.784336] [4: swapper/0: 1] muic-universal:muic_init
<6>[ 2.784377] [0: coagent1: 365] coagent_thread: 1th thread is running...
<6>[ 2.784451] [0: coagent1: 365] init_fifo_test: fifo module insert
<6>[ 2.784522] [0: coagent1: 365] init_fifo_test: queue size:1024
<6>[ 2.784587] [0: coagent1: 365] init_fifo_test: queue_available1: 1024
<6>[ 2.784657] [0: coagent1: 365] init_fifo_test: queue len: 2
<6>[ 2.784742] [0: coagent1: 365] init_fifo_test: queue_available: 1022
<6>[ 2.784835] [0: coagent1: 365] coagent_thread: [ 0 - 1/1023] cmd=5, param=4
<6>[ 2.785071] [0: coagent1: 365] coagent_thread: [ 1 - 0/1024] cmd=6, param=5
<6>[ 2.785164] [0: coagent1: 365] coagent_thread: The copied item is not one(0)
<6>[ 2.785232] [4: swapper/0: 1] [sec-nfc] __sec_nfc_probe: start
<6>[ 2.785284] [4: swapper/0: 1] [sec-nfc] sec_nfc_parse_dt: irq : 39, ven : 306, firm : 307
<6>[ 2.785354] [4: swapper/0: 1] pcal6524_gpio_request gpio 6
<6>[ 2.785390] [4: swapper/0: 1] pcal6524_gpio_direction_output(off=[6], val=[1])
<6>[ 2.786191] [4: swapper/0: 1] pcal6524_gpio_request gpio 7
<6>[ 2.786229] [4: swapper/0: 1] pcal6524_gpio_direction_output(off=[7], val=[0])
<6>[ 2.787033] [4: swapper/0: 1] [sec-nfc] __sec_nfc_probe: success
<6>[ 2.787073] [4: swapper/0: 1] [sec-nfc] sec_nfc_i2c_probe: start
<6>[ 2.787437] [4: swapper/0: 1] [sec-nfc] sec_nfc_regulator_onoff: onoff = 1
<6>[ 2.788601] [4: swapper/0: 1] [sec-nfc] sec_nfc_i2c_probe: success
<6>[ 2.788681] [4: swapper/0: 1] [ESE-P3] : Entry : spip3_dev_init
<6>[ 2.788739] [4: swapper/0: 1] [ESE-P3] : spip3_probe chip select : 0 , bus number = 2
<6>[ 2.788787] [4: swapper/0: 1] p3_parse_dt success vdd:pm8998_lvs2
<6>[ 2.788826] [4: swapper/0: 1] p3_parse_dt: ap_vendor - qualcomm
<6>[ 2.788865] [4: swapper/0: 1] spip3_probe success alloc ctrl_data!
<6>[ 2.788920] [4: swapper/0: 1] [ESE-P3] : spip3_probe finished...
<4>[ 2.789018] [4: swapper/0: 1] CHRDEV "sensors" major number 221 goes below the dynamic allocation range
<6>[ 2.789252] [4: swapper/0: 1] [SX9320]: sx9320_probe - Probe Start!
<6>[ 2.789335] [4: swapper/0: 1] input: grip_sensor as /devices/virtual/input/input7
<3>[ 2.789415] [4: swapper/0: 1] [SX9320]: sx9320_read_setupreg - sx9320,normal_thd_ta: property read err 0x 4 (-22)
<6>[ 2.789476] [4: swapper/0: 1] [SX9320]: sx9320_parse_dt - dt has no TA thd
<6>[ 2.789519] [4: swapper/0: 1] [SX9320]: afeph0:0, afeph1:0, afeph2:0, afeph3:4
<6>[ 2.791179] [4: swapper/0: 1] usb: [M] manager_notifier_register: listener=26 register
<6>[ 2.791229] [4: swapper/0: 1] ccic_notifier_init
<3>[ 2.791261] [4: swapper/0: 1] ccic_notifier_init already registered
<6>[ 2.791301] [4: swapper/0: 1] [SX9320]: sx9320_probe - Probe done!
<7>[ 2.791403] [4: swapper/0: 1] HRM_dbg : max86915_probe - start
<7>[ 2.791460] [4: swapper/0: 1] HRM_dbg : max86915_parse_dt - hrm_threshold = 100000, prox_threshold = 100000
<7>[ 2.791515] [4: swapper/0: 1] HRM_dbg : max86915_parse_dt - init_curr = 0x46 0x41 0x28 0x3c
<6>[ 2.791568] [4: swapper/0: 1] pcal6524_gpio_request gpio 23
<7>[ 2.791605] [4: swapper/0: 1] HRM_dbg : max86915_power_ctrl - onoff : 1, state : 0
<6>[ 2.792206] [4: swapper/0: 1] pcal6524_gpio_direction_output(off=[23], val=[1])
<7>[ 2.796261] [4: swapper/0: 1] HRM_dbg : max86915_get_part_id - 0xC1 :b
<7>[ 2.796676] [4: swapper/0: 1] HRM_dbg : max86915_get_part_id - 0xFE :0xc2
<7>[ 2.798832] [4: swapper/0: 1] HRM_dbg : max86915_trim_check - isTrimmed :32, reg93_val : 32
<6>[ 2.798913] [4: swapper/0: 1] input: hrm_sensor as /devices/virtual/input/input8
<7>[ 2.799285] [4: swapper/0: 1] HRM_dbg : max86915_power_ctrl - onoff : 0, state : 1
<6>[ 2.799764] [4: swapper/0: 1] pcal6524_gpio_direction_input(off=[23])
<7>[ 2.800304] [4: swapper/0: 1] HRM_dbg : max86915_probe - success
<6>[ 2.800375] [4: swapper/0: 1] [FACTORY] factory_adsp_init
<6>[ 2.800436] [4: swapper/0: 1] [FACTORY] factory_adsp_init: Timer Init
<6>[ 2.800504] [4: swapper/0: 1] [FACTORY] adsp_factory_register - type:12 ptr:0000000000000000
<6>[ 2.800557] [4: swapper/0: 1] [FACTORY] core_factory_init
<6>[ 2.800618] [4: swapper/0: 1] [FACTORY] adsp_factory_register - type:0 ptr:0000000000000000
<6>[ 2.801286] [4: swapper/0: 1] [FACTORY] lsm6dsl_accel_factory_init
<6>[ 2.801349] [4: swapper/0: 1] [FACTORY] adsp_factory_register - type:1 ptr:0000000000000000
<6>[ 2.801403] [4: swapper/0: 1] [FACTORY] lsm6dsl_gyro_factory_init
<6>[ 2.801469] [4: swapper/0: 1] [FACTORY] adsp_factory_register - type:2 ptr:0000000000000000
<6>[ 2.801522] [4: swapper/0: 1] [FACTORY] ak09916c_factory_init
<6>[ 2.801578] [4: swapper/0: 1] [FACTORY] adsp_factory_register - type:3 ptr:0000000000000000
<6>[ 2.801631] [4: swapper/0: 1] [FACTORY] lps22hb_pressure_factory_init
<6>[ 2.801689] [4: swapper/0: 1] [FACTORY] adsp_factory_register - type:4 ptr:0000000000000000
<6>[ 2.801742] [4: swapper/0: 1] [FACTORY] tmd490x_light_factory_init
<6>[ 2.801814] [4: swapper/0: 1] [FACTORY] adsp_factory_register - type:5 ptr:0000000000000000
<6>[ 2.801868] [4: swapper/0: 1] [FACTORY] tmd490x_prox_factory_init
<6>[ 2.802221] [4: swapper/0: 1] [FACTORY] adsp_factory_register - type:10 ptr:0000000000000000
<6>[ 2.802274] [4: swapper/0: 1] [FACTORY] hh_hole_factory_init
<6>[ 2.802313] [4: swapper/0: 1] battery_notifier_init
<6>[ 2.802374] [4: swapper/0: 1] sm5720_fuelgauge_init:
<6>[ 2.802502] [4: swapper/0: 1] max77705_fuelgauge_init:
<6>[ 2.802624] [4: swapper/0: 1] max77705_fuelgauge_probe: max77705 Fuelgauge Driver Loading
<3>[ 2.803112] [4: swapper/0: 1] max77705_fuelgauge_parse_dt error reading capacity_max_hv -22
<6>[ 2.803168] [4: swapper/0: 1] max77705_fuelgauge_parse_dt : LOW TEMP LIMIT(100)
<6>[ 2.803219] [4: swapper/0: 1] max77705_fuelgauge_parse_dt : SW V Empty (3200)mV, SW V Empty recover (3480)mV
<3>[ 2.803287] [4: swapper/0: 1] max77705_fuelgauge_parse_dt len: 4416, length: 1104, 92
<6>[ 2.803538] [4: swapper/0: 1] max77705_fuelgauge_parse_dt : Full condition soc is Empty
<6>[ 2.803591] [4: swapper/0: 1] max77705_fuelgauge_parse_dt thermal: 2, fg_irq: 0, capacity_max: 1000
<6>[ 2.803591] [4: swapper/0: 1] qrtable20: 0x1002, qrtable30 : 0xa04
<6>[ 2.803591] [4: swapper/0: 1] capacity_max_margin: 300, capacity_min: 0
<6>[ 2.803591] [4: swapper/0: 1] calculation_type: 0x1c, fuel_alert_soc: 1,
<6>[ 2.803591] [4: swapper/0: 1] repeated_fuelalert: 1
<6>[ 2.803799] [4: swapper/0: 1] [max77705_fuelgauge_parse_dt][3753]
<7>[ 2.804316] [4: swapper/0: 1] max77705_fg_read_rawsoc: raw capacity (0.01%) (1791)
<7>[ 2.804363] [4: swapper/0: 1] max77705_fg_read_rawsoc: raw capacity (1791), data(0x11eb)
<6>[ 2.805326] [4: swapper/0: 1] max77705_check_jig_status ret(0)
<6>[ 2.805367] [4: swapper/0: 1] max77705_fg_init: jig_result : 0
<6>[ 2.805408] [4: swapper/0: 1] max77705_check_jig_status ret(0)
<6>[ 2.805961] [4: swapper/0: 1] max77705_fuelgauge_probe: SW/HW V empty init
<6>[ 2.806721] [4: swapper/0: 1] max77705_fg_set_vempty: HW V EMPTY Disable, SW V EMPTY Enable with 3200 mV (3200)
<6>[ 2.806833] [4: swapper/0: 1] [max77705_fuelgauge_probe]IRQ_BASE(697) FG_IRQ(708)
<6>[ 2.809041] [4: swapper/0: 1] [max77705_fg_alert_init] SALRT(0xff01), CONFIG(0x0314)
<6>[ 2.810325] [4: swapper/0: 1] max77705_fuelgauge_probe: max77705 Fuelgauge Driver Loaded
<6>[ 2.810414] [4: swapper/0: 1] sm5720_charger_init :
<6>[ 2.810552] [4: swapper/0: 1] max77705_charger_init:
<6>[ 2.810674] [4: swapper/0: 1] max77705_charger_probe: max77705 Charger Driver Loading
<6>[ 2.810823] [4: swapper/0: 1] max77705_charger_parse_dt: battery,chg_float_voltage is 4350
<6>[ 2.810969] [4: swapper/0: 1] max77705_charger_initialize
<6>[ 2.811296] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] get_tsp_nvm_data: offset:35 data:02
<6>[ 2.813150] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0
<6>[ 2.813294] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: Normal changed
<6>[ 2.815562] [4: swapper/0: 1] max77705_set_float_voltage: battery cv voltage 0x13
<6>[ 2.816982] [4: swapper/0: 1] max77705_chg_set_wdtmr_en: WDT en = 1
<6>[ 2.825463] [4: swapper/0: 1] max77705 : [0xb1]0xff, [0xb2]0x9f, [0xb3]0x80, [0xb4]0x78, [0xb5]0x00, [0xb6]0xff, [0xb7]0x15, [0xb8]0x38, [0xb9]0x40, [0xba]0x98, [0xbb]0x13, [0xbc]0x3c, [0xbd]0x6c, [0xbe]0x34, [0xbf]0x02, [0xc0]0x93, [0xc1]0x14, [0xc2]0x00, [0xc3]0x60,
<6>[ 2.826186] [4: swapper/0: 1] max77705_get_input_current_type: reg:(0x13), charging_current:(500)
<6>[ 2.826538] [4: swapper/0: 1] max77705_get_charge_current: reg:(0x0), charging_current:(100)
<6>[ 2.826895] [4: swapper/0: 1] max77705_charger_probe : device found : ver.0x3
<3>[ 2.827418] [4: swapper/0: 1] power_supply otg: driver failed to report `online' property: -11
<6>[ 2.833481] [5: swapper/0: 1] max77705_chg_set_wdtmr_kick: WDT Kick
<6>[ 2.834024] [5: swapper/0: 1] max77705_charger_probe: MAX77705 Charger Driver Loaded
<6>[ 2.834115] [5: swapper/0: 1] mfc_charger_init
<6>[ 2.834325] [5: swapper/0: 1] mfc-charger 27-003b: mfc_charger_probe: MFC Charger Driver Loading
<6>[ 2.834390] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 150
<6>[ 2.834437] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 52
<6>[ 2.834483] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 142
<6>[ 2.834527] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 44
<6>[ 2.834572] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 150
<6>[ 2.834615] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 30
<6>[ 2.834661] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 150
<6>[ 2.834704] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 27
<6>[ 2.834749] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 165
<6>[ 2.834792] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = -12
<6>[ 2.834838] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 156
<6>[ 2.834881] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 21
<6>[ 2.834930] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 150
<6>[ 2.834973] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 52
<6>[ 2.835019] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 142
<6>[ 2.835061] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 44
<6>[ 2.835107] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 150
<6>[ 2.835150] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 30
<6>[ 2.835195] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 150
<6>[ 2.835238] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 27
<6>[ 2.835283] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 165
<6>[ 2.835326] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = -12
<6>[ 2.835372] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 156
<6>[ 2.835415] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 21
<6>[ 2.835462] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 150
<6>[ 2.835506] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 52
<6>[ 2.835551] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 142
<6>[ 2.835595] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 44
<6>[ 2.835641] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 150
<6>[ 2.835684] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 30
<6>[ 2.835730] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 150
<6>[ 2.835773] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 27
<6>[ 2.835818] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 165
<6>[ 2.835862] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = -12
<6>[ 2.835908] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 156
<6>[ 2.835951] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 21
<6>[ 2.836001] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 150
<6>[ 2.836045] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 82
<6>[ 2.836092] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 142
<6>[ 2.836137] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 74
<6>[ 2.836184] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 150
<6>[ 2.836228] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 60
<6>[ 2.836275] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 150
<6>[ 2.836319] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 57
<6>[ 2.836365] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 165
<6>[ 2.836410] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 22
<6>[ 2.836456] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 156
<6>[ 2.836500] [5: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 51
<6>[ 2.836551] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 150
<6>[ 2.836595] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 82
<6>[ 2.836641] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 142
<6>[ 2.836686] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 74
<6>[ 2.836732] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 150
<6>[ 2.836776] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 60
<6>[ 2.836823] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 150
<6>[ 2.836867] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 57
<6>[ 2.836913] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 165
<6>[ 2.836958] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 22
<6>[ 2.837004] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 156
<6>[ 2.837048] [5: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 51
<6>[ 2.837098] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 150
<6>[ 2.837144] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 82
<6>[ 2.837191] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 142
<6>[ 2.837235] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 74
<6>[ 2.837282] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 150
<6>[ 2.837327] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 60
<6>[ 2.837374] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 150
<6>[ 2.837419] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 57
<6>[ 2.837466] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 165
<6>[ 2.837510] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 22
<6>[ 2.837557] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 156
<6>[ 2.837602] [5: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 51
<6>[ 2.837652] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0x96
<6>[ 2.837698] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0xffffffe4
<6>[ 2.837748] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0x8e
<6>[ 2.837794] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0xffffffdc
<6>[ 2.837844] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0x96
<6>[ 2.837889] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0xffffffce
<6>[ 2.837940] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0x96
<6>[ 2.837985] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0xffffffce
<6>[ 2.838037] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0xa5
<6>[ 2.838084] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0xffffffa4
<6>[ 2.838136] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0x9c
<6>[ 2.838183] [5: swapper/0: 1] mfc_chg_parse_dt fod Hero 5V data = 0xffffffc3
<6>[ 2.838246] [5: swapper/0: 1] mfc_chg_parse_dt: mst_switch_delay is Empty
<6>[ 2.838300] [5: swapper/0: 1] mfc_chg_parse_dt: fail to read wc_hv_rpp.
<6>[ 2.838357] [5: swapper/0: 1] mfc_chg_parse_dt wpc_det = 0x7fb, irq_wpc_det = 0x35
<6>[ 2.838413] [5: swapper/0: 1] mfc_chg_parse_dt wpc_int = 0x7a, irq_wpc_int = 0x161
<3>[ 2.838472] [5: swapper/0: 1] mfc-charger 27-003b: mfc_chg_parse_dt : can't wpc_en
<6>[ 2.838527] [5: swapper/0: 1] mfc_charger_probe: mfc-charger
<6>[ 2.839337] [5: swapper/0: 1] mfc_charger_probe wc_w_state_irq = 1
<6>[ 2.839390] [1: kworker/u16:3: 317] mfc_wpc_int_req_work
<6>[ 2.839451] [5: swapper/0: 1] mfc-charger 27-003b: mfc_charger_probe: MFC Charger Driver Loaded
<6>[ 2.839568] [5: swapper/0: 1] etspi_init
<6>[ 2.839753] [5: swapper/0: 1] etspi_probe
<6>[ 2.839795] [5: swapper/0: 1] etspi_parse_dt: sleepPin=320
<6>[ 2.839840] [5: swapper/0: 1] etspi_parse_dt: drdyPin=26
<6>[ 2.839883] [5: swapper/0: 1] etspi_parse_dt: ldo_pin=318
<6>[ 2.839926] [5: swapper/0: 1] etspi_parse_dt: chipid: ET510
<6>[ 2.839980] [5: swapper/0: 1] etspi_parse_dt is successful
<6>[ 2.840130] [5: swapper/0: 1] etspi_platformInit
<6>[ 2.840172] [5: swapper/0: 1] pcal6524_gpio_request gpio 18
<6>[ 2.840218] [5: swapper/0: 1] pcal6524_gpio_direction_output(off=[18], val=[0])
<6>[ 2.840458] [5: kworker/5:0: 51] mfc_chg_get_property cable_type =0
<6>[ 2.841449] [5: swapper/0: 1] pcal6524_gpio_request gpio 20
<6>[ 2.841495] [5: swapper/0: 1] pcal6524_gpio_direction_output(off=[20], val=[0])
<6>[ 2.843856] [5: swapper/0: 1] etspi_platformInit sleep value =0
<6>[ 2.843856] [5: swapper/0: 1] etspi_platformInit ldo en value =0
<6>[ 2.843949] [5: swapper/0: 1] etspi_platformInit successful status=0
<3>[ 2.844511] [5: swapper/0: 1] register_client_adhoc:find path.src 1 dest 512
<3>[ 2.844835] [5: swapper/0: 1] register_client_adhoc:Client handle 40 fpsensor_bw
<6>[ 2.844889] [5: swapper/0: 1] etspi_probe is successful
<6>[ 2.844946] [5: swapper/0: 1] etspi_init is successful
<6>[ 2.844992] [5: swapper/0: 1] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 6.3
<6>[ 2.845428] [5: swapper/0: 1] Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-400C-V003-20181120_223915_59759_88593
<4>[ 2.845578] [5: swapper/0: 1] CHRDEV "trustonic_tee" major number 220 goes below the dynamic allocation range
<6>[ 2.845794] [5: swapper/0: 1] Loading t-base-tui module.
<6>[ 2.845837] [5: swapper/0: 1] t-base-QC-MSM8996-Android-400C-V003-20181120_223915_59759_88593
<4>[ 2.845897] [5: swapper/0: 1] CHRDEV "t-base-tui" major number 219 goes below the dynamic allocation range
<6>[ 2.846315] [5: swapper/0: 1] [VIB] [VIB] of_max77705_haptic_dt: mode reference fail
<6>[ 2.846372] [5: swapper/0: 1] [VIB] [VIB] of_max77705_haptic_dt: divisor reference fail
<6>[ 2.846429] [5: swapper/0: 1] [VIB] [VIB] of_max77705_haptic_dt: mode: 1
<6>[ 2.846478] [5: swapper/0: 1] [VIB] [VIB] of_max77705_haptic_dt: divisor: 128
<6>[ 2.849896] [5: swapper/0: 1] [VIB]: ss_vibrator_probe
<6>[ 2.849949] [5: swapper/0: 1] vibrator_parse_dt:498, en gpio not specified
<6>[ 2.850004] [5: swapper/0: 1] There isn't any chip model
<6>[ 2.850155] [5: swapper/0: 1] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 2.851302] [5: swapper/0: 1] ccic_notifier_init
<3>[ 2.851346] [5: swapper/0: 1] ccic_notifier_init already registered
<6>[ 2.851443] [5: swapper/0: 1] max77705: max77705_usbc_init: init
<6>[ 2.851649] [5: swapper/0: 1] max77705: max77705_usbc_probe: Probing : 42
<6>[ 2.851710] [5: swapper/0: 1] max77705: max77705_usbc_probe: created sysfs. ret=0
<6>[ 2.851769] [5: swapper/0: 1] ccic_core_register_chip
<6>[ 2.851916] [5: swapper/0: 1] max77705: max77705_usbc_probe: success typec_register_port
<3>[ 2.851975] [5: swapper/0: 1] usb_notify: send_otg_notify otg_notify is null
<6>[ 2.853920] [5: swapper/0: 1] max77705: max77705_get_version_info: HW rev is 13h, FW rev is 32.00!
<6>[ 2.864408] [4: swapper/0: 1] muic-max77705:max77705_muic_probe
<3>[ 2.864467] [4: swapper/0: 1] muic-max77705:max77705_muic_probe not found muic dt! ret[-22]
<6>[ 2.864527] [4: swapper/0: 1] muic_init_gpio_cb (0)
<6>[ 2.864567] [4: swapper/0: 1] muic_init_gpio_cb: usb_path(PDA), uart_path(AP)
<6>[ 2.864709] [4: swapper/0: 1] muic_notifier_register: listener=0 register
<6>[ 2.864763] [4: swapper/0: 1] muic_handle_dock_notification: ignore(69)
<6>[ 2.864812] [4: swapper/0: 1] muic_notifier_register: listener=9 register
<6>[ 2.864863] [4: swapper/0: 1] muic_handle_cable_data_notification: MUIC uart type(0)
<6>[ 2.864918] [4: swapper/0: 1] muic_init_switch_dev_cb: done
<6>[ 2.864961] [4: swapper/0: 1] muic-max77705:max77705_muic_init_regs
<6>[ 2.865007] [4: swapper/0: 1] muic-max77705:max77705_muic_clear_interrupt
<6>[ 2.865351] [4: swapper/0: 1] muic-max77705:max77705_muic_clear_interrupt CLEAR!! UIC_INT:0x00
<6>[ 2.865411] [4: swapper/0: 1] muic-max77705:max77705_muic_irq_init
<6>[ 2.871274] [4: swapper/0: 1] muic-max77705:max77705_muic_irq_init uiadc(722), chgtyp(721), dcdtmo(720), vbadc(719), vbusdet(718)
<6>[ 2.871644] [4: swapper/0: 1] muic-max77705:max77705_muic_probe POGO_ADC : 0x07
<6>[ 2.871701] [4: swapper/0: 1] max77705_muic_register_ccic_notifier: Registering CCIC_NOTIFY_DEV_MUIC.
<6>[ 2.871765] [4: swapper/0: 1] max77705_muic_init_ccic_info_data
<6>[ 2.871813] [4: swapper/0: 1] usb: [M] manager_notifier_register: listener=21 register
<6>[ 2.871870] [4: swapper/0: 1] ccic_notifier_init
<3>[ 2.871908] [4: swapper/0: 1] ccic_notifier_init already registered
<6>[ 2.871955] [4: swapper/0: 1] max77705_muic_register_ccic_notifier: done.
<6>[ 2.872003] [4: swapper/0: 1] AFC mode enabled
<6>[ 2.872042] [4: swapper/0: 1] muic-max77705:max77705_muic_init_detect
<6>[ 2.872493] [4: swapper/0: 1] muic-max77705:max77705_muic_detect_dev USBC1:0x0f, USBC2:0x05, BC:0x00
<6>[ 2.872557] [4: swapper/0: 1] muic-max77705:max77705_muic_detect_dev adc:0x7 vbvolt:0x0 chgtyp:0x0 spchgtyp:0x0 sysmsg:0x5 vbadc:0x0 dcdtmo:0x0
<6>[ 2.872640] [4: swapper/0: 1] max77705_muic_update_adc_with_rid: adc(0x7->0x7) rid(7) rprd(0)
<6>[ 2.872700] [4: swapper/0: 1] muic-max77705:max77705_muic_check_new_dev 0->0 switch_val[0x3f]
<6>[ 2.872760] [4: swapper/0: 1] muic-max77705:max77705_muic_detect_dev DETACHED
<6>[ 2.872811] [4: swapper/0: 1] muic-max77705:max77705_muic_handle_detach Duplicated(0), just ignore
<6>[ 2.872872] [4: swapper/0: 1] muic-max77705:max77705_muic_handle_vbus <1>
<6>[ 2.872923] [4: swapper/0: 1] vbus_notifier_handle: (0)->(1)
<6>[ 2.872968] [4: swapper/0: 1] vbus_notifier_notify: CMD=1, DATA=1
<6>[ 2.873016] [4: swapper/0: 1] usb: [M] manager_handle_vbus_notification: cmd=1, vbus_type=LOW, WATER DET=0 ATTACH=DETATCH (0)
<6>[ 2.873090] [4: swapper/0: 1] vbus_notifier_notify: notify done(0x0)
<6>[ 2.873137] [4: swapper/0: 1] max77705_muic_enable_detecting_short
<6>[ 2.873185] [4: swapper/0: 1] max77705: is_empty_usbc_cmd_queue: usbc_cmd_queue Empty(T)
<6>[ 2.873243] [4: swapper/0: 1] max77705: max77705_usbc_opcode_write: W->W opcode[0x56] write_length[1] read_length[1]
<6>[ 2.873312] [4: swapper/0: 1] max77705: front_usbc_cmd: Opcode(0x56)
<6>[ 2.873361] [4: swapper/0: 1] max77705: dequeue_usbc_cmd: Opcode(0x56) Response(0xff)
<6>[ 2.873415] [4: swapper/0: 1] max77705: max77705_usbc_cmd_run: No ISR
<6>[ 2.873464] [4: swapper/0: 1] max77705: max77705_i2c_opcode_write: opcode 0x56, write_length 2
<6>[ 2.873526] [4: swapper/0: 1] max77705: opcode_write: 00000000: 56 07
<6>[ 2.873970] [4: swapper/0: 1] muic-max77705:muic_register_usb_notifier: Registering EXTERNAL_NOTIFY_DEV_MUIC.
<6>[ 2.874038] [4: swapper/0: 1] usb_notify: usb_external_notify_register: listener=(muic)0 register
<6>[ 2.874099] [4: swapper/0: 1] muic-max77705:muic_register_usb_notifier: done.
<6>[ 2.874153] [4: swapper/0: 1] max77705: max77705_cc_init: IN
<6>[ 2.882909] [1: swapper/0: 1] max77705_cc_init: water state : DRY
<6>[ 2.882976] [1: swapper/0: 1] max77705: max77705_cc_init: OUT
<6>[ 2.883036] [1: swapper/0: 1] max77705: max77705_pd_init: IN
<6>[ 2.888853] [1: swapper/0: 1] max77705: max77705_pd_rid: RID_OPEN
<6>[ 2.888923] [1: swapper/0: 1] max77705: max77705_ccic_event_work: usb: DIAES 4-2-7-0-0
<6>[ 2.889035] [1: swapper/0: 1] max77705: max77705_ccic_event_work: usb: DIAES 1-3-0-0-0
<6>[ 2.889100] [2: kworker/u16:2: 304] max77705: max77705_ccic_event_notifier: usb: dest=MUIC, id=ID_RID, attach=7, event=0
<6>[ 2.889186] [2: kworker/u16:2: 304] ccic_notifier_notify: src:5 dest:4 id:02 rid:07
<6>[ 2.889254] [2: kworker/u16:2: 304] usb: [M] manager_handle_ccic_notification: src:CCIC dest:MUIC id:ID_RID attach/rid:7
<6>[ 2.889340] [2: kworker/u16:2: 304] usb: [M] manager_notifier_notify: src:CCIC dest:MUIC id:ID_RID sub1:07 sub2:00 sub3:00
<6>[ 2.889428] [2: kworker/u16:2: 304] max77705_muic_handle_ccic_notification: Rcvd Noti=> action: 2 src:5 dest:4 id:2 sub[7 0 0]
<6>[ 2.889514] [2: kworker/u16:2: 304] max77705_muic_handle_ccic_notification: CCIC_NOTIFY_ID_RID
<6>[ 2.889586] [2: kworker/u16:2: 304] max77705_muic_handle_ccic_RID: src:5 dest:4 id:2 rid:7 sub2:0 sub3:0
<6>[ 2.889661] [2: kworker/u16:2: 304] usb: [M] manager_notifier_notify: notify done(0x0)
<6>[ 2.889726] [2: kworker/u16:2: 304] ccic_notifier_notify: notify done(0x0)
<6>[ 2.889800] [1: swapper/0: 1] max77705: max77705_ccic_event_work: typec_register_partner, typec_power_role=0 typec_data_role=0 event=0
<6>[ 2.889895] [1: swapper/0: 1] max77705: max77705_ccic_event_work: detach case
<6>[ 2.889988] [1: swapper/0: 1] max77705: max77705_check_rid: max77705_check_rid rid : 7, fct_id : 7
<6>[ 2.889988] [1: swapper/0: 1]
<6>[ 2.890086] [2: kworker/u16:2: 304] max77705: max77705_ccic_event_notifier: usb: dest=USB, id=ID_USB, attach=Detached, drp=USB_DETACH
<6>[ 2.890202] [1: swapper/0: 1] max77705: max77705_usbc_opcode_write: W->W opcode[0x57] write_length[1] read_length[0]
<6>[ 2.890288] [1: swapper/0: 1] max77705: front_usbc_cmd: Opcode(0xff)
<6>[ 2.890349] [1: swapper/0: 1] max77705: max77705_usbc_opcode_write: !!! current_cmd.opcode [0xff], read_op->opcode[0x57]
<6>[ 2.890437] [1: swapper/0: 1] max77705_set_fw_noautoibus : OPCODE(0x57) W_LENGTH(1) R_LENGTH(0) AUTOIBUS(0x1)
<6>[ 2.890524] [2: kworker/u16:2: 304] ccic_notifier_notify: src:5 dest:1 id:03 sub1:0 sub2:00 sub3:00
<6>[ 2.890602] [2: kworker/u16:2: 304] usb: [M] manager_handle_ccic_notification: src:CCIC dest:USB id:ID_USB attach/rid:0
<6>[ 2.890690] [2: kworker/u16:2: 304] usb: [M] manager_notifier_notify: src:CCIC dest:USB id:ID_USB sub1:00 sub2:00 sub3:00
<6>[ 2.890776] [2: kworker/u16:2: 304] ccic_notifier_notify: notify done(0x0)
<6>[ 2.890831] [1: swapper/0: 1] max77705: max77705_datarole_irq_handler: INVALID IRQ IRQ(-1)_OUT
<6>[ 2.890905] [1: swapper/0: 1] max77705: max77705_pd_init: OUT
<6>[ 2.891318] [1: swapper/0: 1] max77705: max77705_usbc_opcode_write: W->W opcode[0x54] write_length[1] read_length[1]
<6>[ 2.891408] [1: swapper/0: 1] max77705: front_usbc_cmd: Opcode(0xff)
<6>[ 2.891472] [1: swapper/0: 1] max77705: max77705_usbc_opcode_write: !!! current_cmd.opcode [0xff], read_op->opcode[0x54]
<6>[ 2.891560] [1: swapper/0: 1] max77705: max77705_usbc_disable_auto_vbus: TURN OFF THE AUTO VBUS
<6>[ 2.891802] [1: swapper/0: 1] ccic_misc_init - register success
<6>[ 2.891867] [1: swapper/0: 1] usb_notify: usb_external_notify_register: listener=(pdic)2 register
<6>[ 2.891945] [1: swapper/0: 1] max77705_usbc_probe : external notifier register done!
<6>[ 2.892477] [1: swapper/0: 1] max77705: max77705_usbc_probe: probing Complete..
<6>[ 2.892600] [1: swapper/0: 1] uh_log : create /proc/uh_log
<6>[ 2.892671] [1: swapper/0: 1] sec_debug_partition:sec_debug_partition_init: start
<6>[ 2.892882] [3:irq/42-max77705: 329] max77705:max77705_irq_thread: irq[42] 42/697/2037 irq_src=0x08 pmic_rev=0x03
<6>[ 2.893213] [3: swapper/0: 1] sec_debug_partition:sec_debug_partition_init: end
<6>[ 2.894081] [2:irq/42-max77705: 329] [MAX77705] irq_reg, complete [1], 84, 39, 0, 0, ff
<6>[ 2.894155] [2:irq/42-max77705: 329] [MAX77705] dump_reg, f, 5, 0, 0, 0, 0, 0, 7
<6>[ 2.894224] [2:irq/42-max77705: 329] max77705: max77705_apcmd_irq: IRQ(709)_IN
<6>[ 2.894573] [2:irq/42-max77705: 329] max77705: max77705_apcmd_irq: [IN] sysmsg : 5
<6>[ 2.894646] [2:irq/42-max77705: 329] max77705: dequeue_usbc_cmd: Opcode(0xff) Response(0x56)
<6>[ 2.894720] [2:irq/42-max77705: 329] max77705: max77705_usbc_cmd_run: Apcmdres ISR !!!
<6>[ 2.895112] [2:irq/42-max77705: 329] max77705: max77705_i2c_opcode_read: opcode 0xff, read_length 2, ret_error 0
<6>[ 2.895197] [2:irq/42-max77705: 329] max77705: opcode_read: 00000000: 56 07
<6>[ 2.895262] [2:irq/42-max77705: 329] max77705: dequeue_usbc_cmd: Opcode(0x57) Response(0xff)
<6>[ 2.895333] [2:irq/42-max77705: 329] max77705: max77705_usbc_cmd_run: No ISR
<6>[ 2.895398] [2:irq/42-max77705: 329] max77705: max77705_i2c_opcode_write: opcode 0x57, write_length 2
<6>[ 2.895474] [2:irq/42-max77705: 329] max77705: opcode_write: 00000000: 57 01
<6>[ 2.895957] [2:irq/42-max77705: 329] max77705: max77705_apcmd_irq: IRQ(709)_OUT
<6>[ 2.896314] [2:irq/42-max77705: 329] max77705: max77705_vconnsc_irq: == WATER RUN-DRY DETECT ==
<6>[ 2.896674] [2:irq/42-max77705: 329] max77705: max77705_ccpinstat_irq: CCPINSTAT (NO_DETERMINATION)
<6>[ 2.897051] [2:irq/42-max77705: 329] max77705: max77705_ccstat_irq_handler: ccstat : cc_No_Connection
<6>[ 2.897129] [2:irq/42-max77705: 329] max77705: max77705_usbc_clear_queue: IN
<6>[ 2.897194] [2:irq/42-max77705: 329] max77705: dequeue_usbc_cmd: Opcode(0xff) Response(0x57)
<6>[ 2.897267] [2:irq/42-max77705: 329] max77705: dequeue_usbc_cmd: Opcode(0x54) Response(0xff)
<6>[ 2.897339] [2:irq/42-max77705: 329] max77705: dequeue_usbc_cmd: Opcode(0xff) Response(0x54)
<6>[ 2.897409] [2:irq/42-max77705: 329] max77705: dequeue_usbc_cmd: front->next = NULL
<6>[ 2.897474] [2:irq/42-max77705: 329] max77705: is_empty_usbc_cmd_queue: usbc_cmd_queue Empty(T)
<6>[ 2.897546] [2:irq/42-max77705: 329] max77705: is_empty_usbc_cmd_queue: usbc_cmd_queue Empty(T)
<6>[ 2.897617] [2:irq/42-max77705: 329] max77705: max77705_usbc_clear_queue: OUT
<3>[ 2.897680] [2:irq/42-max77705: 329] usb_notify: send_otg_notify otg_notify is null
<6>[ 2.897749] [2:irq/42-max77705: 329] max77705_detach_pd : Detach PD CHARGER
<3>[ 2.897812] [2:irq/42-max77705: 329] usb_notify: is_blocked otg_notify is null
<6>[ 2.897878] [2:irq/42-max77705: 329] max77705_vbus_turn_on_ctrl : enable=0, auto_vbus_en=0, must_block_host=0, swaped=0
<6>[ 2.897962] [2:irq/42-max77705: 329] max77705_vbus_turn_on_ctrl : enable=0
<6>[ 2.898031] [2:irq/42-max77705: 329] max77705_set_otg: CHGIN-OTG off
<6>[ 2.898104] [2:irq/42-max77705: 329] otg accessory power = 0
<6>[ 2.898160] [2:irq/42-max77705: 329] max77705: is_empty_usbc_cmd_queue: usbc_cmd_queue Empty(T)
<6>[ 2.898232] [2:irq/42-max77705: 329] max77705_irq_thread doing_irq = 0, is_usbc_queue=0
<6>[ 2.898705] [2:irq/42-max77705: 329] max77705:max77705_irq_thread: irq[42] 42/697/2037 irq_src=0x08 pmic_rev=0x03
<6>[ 2.899869] [2:irq/42-max77705: 329] [MAX77705] irq_reg, complete [1], 84, 0, 0, 0, ff
<6>[ 2.899942] [2:irq/42-max77705: 329] [MAX77705] dump_reg, f, 5, 0, 0, 0, 0, 0, 7
<6>[ 2.900009] [2:irq/42-max77705: 329] max77705: max77705_apcmd_irq: IRQ(709)_IN
<6>[ 2.900558] [2:irq/42-max77705: 329] max77705: max77705_apcmd_irq: [IN] sysmsg : 5
<6>[ 2.900644] [2:irq/42-max77705: 329] max77705: is_empty_usbc_cmd_queue: usbc_cmd_queue Empty(T)
<6>[ 2.900750] [2:irq/42-max77705: 329] max77705: max77705_usbc_cmd_run: Queue, Empty
<6>[ 2.900830] [2:irq/42-max77705: 329] max77705: max77705_apcmd_irq: IRQ(709)_OUT
<6>[ 2.900908] [2:irq/42-max77705: 329] max77705: is_empty_usbc_cmd_queue: usbc_cmd_queue Empty(T)
<6>[ 2.900993] [2:irq/42-max77705: 329] max77705_irq_thread doing_irq = 0, is_usbc_queue=0
<6>[ 2.904342] [0: kworker/0:3: 327] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 1 timing 2
<6>[ 2.906895] [0: kworker/0:3: 327] mmc0: clock 50000000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 1 timing 2
<6>[ 2.908144] [0: kworker/0:3: 327] mmc0: clock 50000000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 2.908307] [0: kworker/0:3: 327] mmc0: new high speed SDHC card at address 0001
<6>[ 2.911126] [0: kworker/0:3: 327] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3f) latency=-1
<6>[ 2.911236] [0: kworker/0:3: 327] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc0) latency=-1
<6>[ 2.911692] [0: kworker/0:3: 327] Parameters for external-sdcard: min/max_ratio: 20/20 strictlimit: on nr_requests: 32 read_ahead_kb: 256
<6>[ 2.911822] [0: kworker/0:3: 327] mmcblk0: mmc0:0001 ASTC 7.28 GiB
<6>[ 2.914385] [0: kworker/0:3: 327] mmcblk0: p1
<6>[ 3.007639] [3: swapper/0: 1] FIVE: Initialize trusted app in early boot ret: 0
<7>[ 3.007704] [3: swapper/0: 1] initcall tee_driver_init+0x0/0xa8 returned 0 after 111618 usecs
<6>[ 3.007806] [3: swapper/0: 1] *** MPSD ***: mpsd_read_init:
<6>[ 3.007890] [3: swapper/0: 1] *** MPSD ***: mpsd_read_init: Done!
<6>[ 3.007935] [3: swapper/0: 1] *** MPSD ***: mpsd_timer_init:
<6>[ 3.008004] [3: swapper/0: 1] *** MPSD ***: mpsd_timer_init: Done!
<6>[ 3.008050] [3: swapper/0: 1] *** MPSD ***: mpsd_init: Done!
<5>[ 3.008510] I[0: swapper/0: 0] gator: Detected CPUID for 0 as 0x51803
<5>[ 3.008553] I[1: swapper/1: 0] gator: Detected CPUID for 1 as 0x51803
<5>[ 3.008596] I[2: swapper/2: 0] gator: Detected CPUID for 2 as 0x51803
<5>[ 3.008640] I[4: swapper/4: 0] gator: Detected CPUID for 4 as 0x51802
<5>[ 3.008684] I[5: swapper/5: 0] gator: Detected CPUID for 5 as 0x51802
<5>[ 3.008730] I[6: swapper/6: 0] gator: Detected CPUID for 6 as 0x51802
<5>[ 3.008778] I[7: swapper/7: 0] gator: Detected CPUID for 7 as 0x51802
<5>[ 3.008854] [3: swapper/0: 1] gator: Detected CPUID for 3 as 0x51803
<6>[ 3.009036] [3: swapper/0: 1] usbcore: registered new interface driver snd-usb-audio
<6>[ 3.028089] [1: swapper/0: 1] [MAX98512_DEBUG] max98512_i2c_probe: Start. driver_data 0
<4>[ 3.028152] [1: swapper/0: 1] max98512 18-0039: set spk_gain_left by default.
<4>[ 3.028203] [1: swapper/0: 1] max98512 18-0039: set spk_gain_right by default.
<4>[ 3.028255] [1: swapper/0: 1] max98512 18-0039: set digital_gain_left by default.
<4>[ 3.028307] [1: swapper/0: 1] max98512 18-0039: set digital_gain by default.
<6>[ 3.028358] [1: swapper/0: 1] max98512 18-0039: mono_stereo 1
<4>[ 3.028403] [1: swapper/0: 1] max98512 18-0039: set adc_threshold by default.
<6>[ 3.028452] [1: swapper/0: 1] [MAX98512_DEBUG] max98512_i2c_probe: use DSM(0)
<6>[ 3.028502] [1: swapper/0: 1] max98512 18-0039: set sub-device address 0x3a
<4>[ 3.028551] [1: swapper/0: 1] max98512 18-0039: There is no log_class property.
<6>[ 3.028701] [1: swapper/0: 1] [MAX98512_DEBUG] max98512_add_sub_device: bus_id:18, slave_addr:0x3a
<6>[ 3.030138] [1: swapper/0: 1] [MAX98512_DEBUG] max98512_i2c_probe: MAX98512 revisionID L [600] [43]
<6>[ 3.030138] [1: swapper/0: 1]
<6>[ 3.031572] [1: swapper/0: 1] [MAX98512_DEBUG] max98512_i2c_probe: MAX98512 revisionID_r R [600] [43]
<6>[ 3.031572] [1: swapper/0: 1]
<6>[ 3.031802] [1: swapper/0: 1] [MAXIM_DSM] maxdsm_update_param_info: version=35, platform_type=0
<6>[ 3.031861] [1: swapper/0: 1] [MAXIM_DSM] maxdsm_update_param_info: version=51, platform_type=1
<6>[ 3.031925] [1: swapper/0: 1] [MAX98512_DEBUG] max98512_i2c_probe: End. driver_data 0
<6>[ 3.032243] [0: swapper/0: 1] [MAXIM_DSM_CAL] maxdsm_cal_init: Completed initialization
<6>[ 3.032489] [1: swapper/0: 1] [MAXIM_DSM_POWER] maxdsm_power_init: Completed initialization
<4>[ 3.035993] [1: swapper/0: 1] CHRDEV "avtimer" major number 218 goes below the dynamic allocation range
<6>[ 3.037231] [1: swapper/0: 1] samsung_q6audio_adaptation_probe: dev name soc:samsung,q6audio-adaptation
<4>[ 3.038050] [0: swapper/0: 1] CHRDEV "wcd-dsp-glink" major number 217 goes below the dynamic allocation range
<6>[ 3.038612] [0: swapper/0: 1] GACT probability NOT on
<6>[ 3.038662] [0: swapper/0: 1] Mirror/redirect action on
<6>[ 3.038714] [0: swapper/0: 1] u32 classifier
<6>[ 3.038748] [0: swapper/0: 1] Actions configured
<6>[ 3.038795] [0: swapper/0: 1] Netfilter messages via NETLINK v0.30.
<6>[ 3.039122] [0: swapper/0: 1] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
<6>[ 3.039276] [0: swapper/0: 1] ctnetlink v0.93: registering with nfnetlink.
<6>[ 3.039639] [0: swapper/0: 1] xt_time: kernel timezone is -0000
<6>[ 3.039748] [0: swapper/0: 1] IPv4 over IPsec tunneling driver
<6>[ 3.040257] [4: swapper/0: 1] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.040421] [4: swapper/0: 1] arp_tables: arp_tables: (C) 2002 David S. Miller
<6>[ 3.040511] [4: swapper/0: 1] Initializing XFRM netlink socket
<6>[ 3.040710] [4: swapper/0: 1] NET: Registered protocol family 10
<6>[ 3.041549] [4: swapper/0: 1] mip6: Mobile IPv6
<6>[ 3.041592] [4: swapper/0: 1] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.041945] [4: swapper/0: 1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
<6>[ 3.042331] [4: swapper/0: 1] NET: Registered protocol family 17
<6>[ 3.042380] [4: swapper/0: 1] NET: Registered protocol family 15
<5>[ 3.042438] [4: swapper/0: 1] Bridge firewalling registered
<6>[ 3.042477] [4: swapper/0: 1] Ebtables v2.0 registered
<6>[ 3.042582] [4: swapper/0: 1] l2tp_core: L2TP core driver, V2.0
<6>[ 3.042624] [4: swapper/0: 1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
<6>[ 3.042676] [4: swapper/0: 1] l2tp_netlink: L2TP netlink interface
<6>[ 3.042732] [4: swapper/0: 1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
<6>[ 3.042781] [4: swapper/0: 1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
<6>[ 3.042893] [4: swapper/0: 1] sec_argos_register_notifier: rmnet_data_pm_argos_cb(dev_num:6)
<6>[ 3.043296] [4: swapper/0: 1] NET: Registered protocol family 27
<3>[ 3.049152] [4: kworker/4:0: 43] minidump-id not found for adsp
<6>[ 3.049590] [4: kworker/4:0: 43] subsys-pil-tz 17300000.qcom,lpass: for adsp segments only will be dumped.
<3>[ 3.053042] [4: kworker/4:0: 43] minidump-id not found for slpi
<6>[ 3.053415] [4: kworker/4:0: 43] subsys-pil-tz 5c00000.qcom,ssc: for slpi segments only will be dumped.
<3>[ 3.053731] [4: kworker/4:0: 43] minidump-id not found for cdsp
<6>[ 3.054074] [4: kworker/4:0: 43] subsys-pil-tz 8300000.qcom,turing: for cdsp segments only will be dumped.
<6>[ 3.054464] [4: kworker/4:0: 43] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
<6>[ 3.054817] [4: kworker/4:0: 43] platform 4080000.qcom,mss:qcom,mba-mem@0: assigned reserved memory node pil_mba_region@0x96500000
<6>[ 3.055099] [4: kworker/4:0: 43] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
<6>[ 3.055185] [4: kworker/4:0: 43] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
<3>[ 3.055410] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: USB core frequency = 133333333
<3>[ 3.055481] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: setting lpm_to_suspend_delay to zero.
<3>[ 3.056591] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: missing TCSR memory resource
<3>[ 3.056779] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: IOMMU mapping created: 0000000000000000
<3>[ 3.057175] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: attached to IOMMU
<6>[ 3.059253] [4: kworker/4:0: 43] sps:BAM 0x000000000a704000 is registered.
<3>[ 3.059451] [4: kworker/4:0: 43] register_client_adhoc:find path.src 61 dest 512
<3>[ 3.059739] [4: kworker/4:0: 43] register_client_adhoc:find path.src 61 dest 676
<3>[ 3.059932] [4: kworker/4:0: 43] register_client_adhoc:find path.src 1 dest 583
<3>[ 3.060191] [4: kworker/4:0: 43] register_client_adhoc:Client handle 41 usb0
<4>[ 3.060302] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: Could not get usb power_supply
<6>[ 3.060361] [4: kworker/4:0: 43] dwc3_msm_probe : dwc3_msm_probe_done = 1
<6>[ 3.060716] [4: kworker/4:0: 43] sec-thermistor soc:sec_thermistor@0: sec-ap-thermistor successfully probed.
<6>[ 3.060923] [4: kworker/4:0: 43] sec-thermistor soc:sec_thermistor@2: sec-pa-thermistor successfully probed.
<6>[ 3.061278] [4: kworker/4:0: 43] sec-thermistor soc:sec_thermistor@3: sec-wf-thermistor successfully probed.
<3>[ 3.061761] [4: kworker/4:0: 43] ipa ipa3_smp2p_probe:6398 failed to enable irq wake
<6>[ 3.062295] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: (null) state
<3>[ 3.062349] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: dwc3_msm_resume: exiting lpm
<3>[ 3.062865] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: dwc3_msm_resume: exit power collapse
<3>[ 3.064349] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: QMP PHY set_suspend for resume called with cable disconnected
<3>[ 3.064421] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: msm_ssphy_qmp_set_suspend: USB PHY is already resumed.
<3>[ 3.064492] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_enable_clocks(): clocks_enabled:0 on:1
<3>[ 3.064561] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_enable_clocks(): clocks_enabled:1
<3>[ 3.064664] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: attached to IOMMU
<3>[ 3.064716] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: dwc3_msm_resume: exit power collapse
<3>[ 3.064841] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_ALLOC
<3>[ 3.064951] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: Global reset of QMP DP combo phy
<3>[ 3.065021] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_init
<3>[ 3.065071] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_enable_power:req to turn on regulators. power_enabled_ref:0
<3>[ 3.065264] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: min_vol:800000 max_vol:800000
<5>[ 3.065543] [0: swapper/0: 1] Registered cp15_barrier emulation handler
<5>[ 3.065700] [0: swapper/0: 1] Registered setend emulation handler
<6>[ 3.065903] [0: swapper/0: 1] core_ctl: Creating CPU group 0
<6>[ 3.066008] [0: swapper/0: 1] core_ctl: Init CPU0 state
<6>[ 3.066104] [0: swapper/0: 1] core_ctl: Init CPU1 state
<6>[ 3.066149] [4: kworker/4:0: 43] usb: qusb_eud_disable() disable=on, eud_disabled=false
<3>[ 3.066206] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_enable_clocks(): clocks_enabled:1 on:1
<3>[ 3.066271] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_enable_clocks(): clocks_enabled:1
<6>[ 3.066347] [0: swapper/0: 1] core_ctl: Init CPU2 state
<6>[ 3.066401] [0: swapper/0: 1] core_ctl: Init CPU3 state
<6>[ 3.066510] [4: kworker/4:0: 43] Seq count:36
<6>[ 3.066547] [4: kworker/4:0: 43] before 0x23 write 0x23 to 0x210
<6>[ 3.066592] [4: kworker/4:0: 43] before 0x03 write 0x03 to 0x04
<6>[ 3.066636] [4: kworker/4:0: 43] before 0x00 write 0x7c to 0x18c
<6>[ 3.066680] [4: kworker/4:0: 43] before 0x00 write 0x80 to 0x2c
<6>[ 3.066720] [1: swapper/0: 1] core_ctl: Creating CPU group 4
<6>[ 3.066772] [1: swapper/0: 1] core_ctl: Init CPU4 state
<6>[ 3.066819] [1: swapper/0: 1] core_ctl: Init CPU5 state
<6>[ 3.066865] [1: swapper/0: 1] core_ctl: Init CPU6 state
<6>[ 3.066911] [1: swapper/0: 1] core_ctl: Init CPU7 state
<6>[ 3.066963] [4: kworker/4:0: 43] before 0x04 write 0x0a to 0x184
<6>[ 3.067007] [4: kworker/4:0: 43] before 0x08 write 0x19 to 0xb4
<6>[ 3.067051] [4: kworker/4:0: 43] before 0x40 write 0x40 to 0x194
<6>[ 3.067095] [4: kworker/4:0: 43] before 0x20 write 0x1b to 0x198
<6>[ 3.067139] [4: kworker/4:0: 43] before 0x21 write 0x21 to 0x214
<6>[ 3.067184] [4: kworker/4:0: 43] before 0x00 write 0x0e to 0x220
<6>[ 3.067228] [4: kworker/4:0: 43] before 0x58 write 0x58 to 0x224
<6>[ 3.067271] [4: kworker/4:0: 43] before 0x32 write 0x75 to 0x240
<6>[ 3.067315] [4: kworker/4:0: 43] before 0x29 write 0x29 to 0x244
<6>[ 3.067359] [4: kworker/4:0: 43] before 0xca write 0xca to 0x248
<6>[ 3.067403] [4: kworker/4:0: 43] before 0x04 write 0x02 to 0x24c
<6>[ 3.067447] [4: kworker/4:0: 43] before 0x00 write 0x03 to 0x250
<6>[ 3.067491] [4: kworker/4:0: 43] before 0x30 write 0x00 to 0x23c
<6>[ 3.067535] [4: kworker/4:0: 43] before 0x23 write 0x22 to 0x210
<6>[ 3.067579] [4: kworker/4:0: 43] qusb_phy_get_tune1_param(): num_of_bits:3 bit_pos:25
<6>[ 3.067632] [4: kworker/4:0: 43] qusb_phy_get_tune1_param(): bit_mask:7 efuse based tune1 value:-1979711488
<6>[ 3.067691] [0: swapper/0: 1] registered taskstats version 1
<6>[ 3.067747] [4: kworker/4:0: 43] qusb_phy_get_tune1_param(): QC efuse value : 0x5
<5>[ 3.067794] [0: swapper/0: 1] Loading compiled-in X.509 certificates
<6>[ 3.067853] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: read tune diff for USB Device: 4
<6>[ 3.067909] [4: kworker/4:0: 43] qusb_phy_init(): Programming TUNE1 parameter as:75 efuse:5
<6>[ 3.067965] [4: kworker/4:0: 43] qusb_phy_init(): refgen_north_bg_reg : 0x1010101
<6>[ 3.068025] [4: kworker/4:0: 43] qusb_phy_init():Setting qusb phy val: imp_ctrl1 e, tune1 75, tune2 29, tune4 2, bias_control2 1e
<3>[ 3.068278] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: QUSB2PHY_PLL_COMMON_STATUS_ONE:17
<3>[ 3.068335] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: Initializing QMP phy
<3>[ 3.068388] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: reg (HPM)
<1>[ 3.068435] [1: kworker/u16:2: 410] Unable to handle kernel NULL pointer dereference at virtual address 00000100
<1>[ 3.068508] [1: kworker/u16:2: 410] pgd = ffffff800b0ce000
<1>[ 3.068563] [4: kworker/4:0: 43] [00000100] *pgd=00000001fd5be003, *pud=00000001fd5be003
<3>[ 3.068610] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: ldo: min_vol:800000uV max_vol:800000uV
<4>[ 3.068671] [1: kworker/u16:2: 410] , *pmd=0000000000000000
<3>[ 3.068724] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: vdd ldo: min_vol:800000uV max_vol:800000uV
<3>[ 3.068787] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: ldo: min_vol:1200000uV max_vol:1200000uV
<4>[ 3.068844] [1: kworker/u16:2: 410] ------------[ cut here ]------------
<2>[ 3.068897] [1: kworker/u16:2: 410] Kernel BUG at ffffff80081bf940 [verbose debug info unavailable]
<3>[ 3.068972] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: core ldo: min_vol:1200000uV max_vol:1200000uV
<0>[ 3.069032] [1: kworker/u16:2: 410] Internal error: Oops: 96000005 [#1] PREEMPT SMP
<4>[ 3.069093] [1: kworker/u16:2: 410] Modules linked in:
<4>[ 3.069140] [1: kworker/u16:2: 410] CPU: 1 PID: 410 Comm: kworker/u16:2 Not tainted 4.9.112-klabitV5.9 #1
<4>[ 3.069208] [1: kworker/u16:2: 410] Hardware name: Samsung CROWNQLTE CHN PROJECT Rev10 (DT)
<4>[ 3.069269] [1: kworker/u16:2: 410] task: ffffffc166e11d00 task.stack: ffffffc166e6c000
<4>[ 3.069328] [1: kworker/u16:2: 410] PC is at __queue_work+0x34/0x4e0
<4>[ 3.069378] [1: kworker/u16:2: 410] LR is at queue_work_on+0x48/0x64
<3>[ 3.069433] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: msm_ssphy_qmp_enable_clks(): clk_enabled:0 on:1
<4>[ 3.069506] [1: kworker/u16:2: 410] pc : [<ffffff80081bf940>] lr : [<ffffff80081bfe34>] pstate: 60c00085
<4>[ 3.069581] [1: kworker/u16:2: 410] sp : ffffffc166e6fc40
<4>[ 3.069633] [1: kworker/u16:2: 410] x29: ffffffc166e6fc40 x28: 0000000000000001
<4>[ 3.069703] [1: kworker/u16:2: 410] x27: 0000000000000000 x26: 0000000000000008
<4>[ 3.069771] [1: kworker/u16:2: 410] x25: 0000000000000008 x24: 0000000000000003
<4>[ 3.069839] [1: kworker/u16:2: 410] x23: ffffff800a6e8000 x22: 0000000000000000
<4>[ 3.069907] [1: kworker/u16:2: 410] x21: 0000000000000008 x20: ffffffc16723cd80
<4>[ 3.069974] [1: kworker/u16:2: 410] x19: 0000000000000000 x18: 000000007cc652a6
<4>[ 3.070042] [1: kworker/u16:2: 410] x17: 0000000000000001 x16: ffffffc17acb0d90
<4>[ 3.070108] [1: kworker/u16:2: 410] x15: 0000000000000000 x14: 0000000400000003
<4>[ 3.070173] [1: kworker/u16:2: 410] x13: 0000000000000008 x12: 0000000000166e7c
<4>[ 3.070239] [1: kworker/u16:2: 410] x11: 0000000000000000 x10: 00000000026012c0
<4>[ 3.070305] [1: kworker/u16:2: 410] x9 : 0000000000000000 x8 : ffffffc16723ce80
<4>[ 3.070371] [1: kworker/u16:2: 410] x7 : 0000000000000000 x6 : 000000000000003f
<4>[ 3.070436] [1: kworker/u16:2: 410] x5 : 0000000000000000 x4 : 0000000000000001
<4>[ 3.070502] [1: kworker/u16:2: 410] x3 : 0000000000000000 x2 : ffffffc16723cd80
<4>[ 3.070567] [1: kworker/u16:2: 410] x1 : 0000000000000000 x0 : 0000000000000080
<4>[ 3.070634] [1: kworker/u16:2: 410]
<4>[ 3.070634] [1: kworker/u16:2: 410] PC: 0xffffff80081bf900:
<4>[ 3.070719] [1: kworker/u16:2: 410] f900 91363021 9401ba6b 17ffffef a9ba7bfd 910003fd a9046bf9 a90153f3 a9025bf5
<4>[ 3.070830] [1: kworker/u16:2: 410] f920 a90363f7 a90573fb 2a0003f9 aa0103f6 aa0203f4 2a0003fa d53b4220 363812a0
<4>[ 3.070939] [1: kworker/u16:2: 410] f940 b94102c0 37801360 d000fd38 7100235f 91300318 d000fd15 910042b5 aa1803fb
<4>[ 3.071047] [1: kworker/u16:2: 410] f960 54000ca0 b94102c0 37080ac0 d0012940 f94086d3 91014000 f879d800 8b000273
<3>[ 3.071153] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_RESET_EVENT received
<3>[ 3.071215] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_POST_RESET_EVENT received
<4>[ 3.071278] [1: kworker/u16:2: 410]
<4>[ 3.071278] [1: kworker/u16:2: 410] LR: 0xffffff80081bfdf4:
<3>[ 3.071349] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_enable_clocks(): clocks_enabled:1 on:1
<3>[ 3.071420] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_enable_clocks(): clocks_enabled:1
<3>[ 3.071484] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: QMP PHY set_suspend for resume called with cable disconnected
<3>[ 3.071557] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: msm_ssphy_qmp_set_suspend: USB PHY is already resumed.
<4>[ 3.071639] [4: kworker/4:0: 43] fdf4
<3>[ 3.071665] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_SETUP
<3>[ 3.071717] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: Evt buf 0000000000000000 dma fd2b3000 length 4096
<3>[ 3.071782] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: Evt buf 0000000000000000 dma fd2b4000 length 4096
<3>[ 3.071846] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: Evt buf 0000000000000000 dma fd2b5000 length 4096
<6>[ 3.071920] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
<4>[ 3.071969] [4: kworker/4:0: 43] a90153f3 f90013f5 aa0103f4<3>[ 3.072016] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: dwc3_pwr_event_handler irq_stat=0
<6>[ 3.072073] [4: kworker/4:0: 43] max77705_set_usb_phy_completion : resume complete!
<3>[ 3.072126] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: DWC3-msm runtime idle
<3>[ 3.072177] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: DWC3-msm runtime suspend
<4>[ 3.072233] [1: kworker/u16:2: 410] 2a0003f5<3>[ 3.072277] I[0: swapper/0: 0] msm-dwc3 a600000.ssusb: msm_dwc3_pwr_irq received
<3>[ 3.072342] I[0: swapper/0: 0] msm-dwc3 a600000.ssusb: dwc3_pwr_event_handler irq_stat=4
<4>[ 3.072410] [1: kworker/u16:2: 410] d53b4233 d50342df 52800000 aa0203e1
fe14 f9001fa2 940dc7d2 52800001 f9401fa2 350000a0 aa1403e1 2a1503e0 97fffeb7
<4>[ 3.072567] [4: kworker/4:0: 43] fe34 52800021 d51b4233
<3>[ 3.072616] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_enable_clocks(): clocks_enabled:1 on:0
<3>[ 3.072681] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_enable_clocks(): clocks_enabled:0
<6>[ 3.072745] [4: kworker/4:0: 43] usb: qusb_eud_disable() disable=off, eud_disabled=false
<3>[ 3.072802] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_enable_power:req to turn off regulators. power_enabled_ref:1
<4>[ 3.072879] [1: kworker/u16:2: 410] a94153f3 f94013f5 2a0103e0 a8c47bfd d65f03c0 aa0003e1
<3>[ 3.072970] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: min_vol:0 max_vol:800000
<3>[ 3.073020] [4: kworker/4:0: 43] msm-qusb-phy-v2 88e2000.qusb: QUSB PHY's regulators are turned OFF.
<3>[ 3.073081] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: QMP PHY set_suspend for suspend called with cable disconnected
<3>[ 3.073155] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: msm_ssphy_qmp_enable_clks(): clk_enabled:1 on:0
<4>[ 3.073233] [1: kworker/u16:2: 410] fe54 aa0003e2 a9bf7bfd 910003fd b9405800 f9402821 97fffea9 a8c17bfd d65f03c0
<4>[ 3.073348] [1: kworker/u16:2: 410]
<4>[ 3.073348] [1: kworker/u16:2: 410] SP: 0xffffffc166e6fc00:
<4>[ 3.073434] [1: kworker/u16:2: 410] fc00 081bfe34 ffffff80 66e6fc40 ffffffc1 081bf940 ffffff80 60c00085 00000000
<4>[ 3.073547] [1: kworker/u16:2: 410] fc20 66e6fd20 ffffffc1 00002017 00000000 ffffffff ffffffff 00002017 00000000
<4>[ 3.073659] [1: kworker/u16:2: 410] fc40 66e6fca0 ffffffc1 081bfe34 ffffff80 00000000 00000000 00000000 00000000
<3>[ 3.073768] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: reg (LPM)
<4>[ 3.073822] [4: kworker/4:0: 43] fc60 00000008 00000000 6723cd80 ffffffc1 0a6e8000
<3>[ 3.073894] [4: kworker/4:0: 43] msm-usb-ssphy-qmp 88e8000.ssphy: QMP PHY is suspend
<4>[ 3.073951] [1: kworker/u16:2: 410] ffffff80 00000003 00000000
<0>[ 3.074022] [1: kworker/u16:2: 410] Process kworker/u16:2 (pid: 410, stack limit = 0xffffffc166e6c000)
<3>[ 3.074084] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: dwc3_msm_suspend: power collapse
<0>[ 3.074156] [1: kworker/u16:2: 410] Stack: (0xffffffc166e6fc40 to 0xffffffc166e70000)
<0>[ 3.074226] [1: kworker/u16:2: 410] fc40: ffffffc166e6fca0 ffffff80081bfe34 0000000000000000 0000000000000000
<3>[ 3.074292] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: IOMMU detached
<0>[ 3.074359] [1: kworker/u16:2: 410] fc60: 0000000000000008 ffffffc16723cd80 ffffff800a6e8000 0000000000000003
<0>[ 3.074439] [1: kworker/u16:2: 410] fc80: ffffffc166e80000 0000000000000000 0000000000000000 0000000000000001
<0>[ 3.074519] [1: kworker/u16:2: 410] fca0: ffffffc166e6fce0 ffffff80084ce0d8 ffffffc166e11d00 ffffffc16723ce00
<0>[ 3.074600] [1: kworker/u16:2: 410] fcc0: ffffffc16d096000 0000000000000001 ffffffc166e6fce0 ffffffc16723cd80
<0>[ 3.074680] [1: kworker/u16:2: 410] fce0: ffffffc166e6fd40 ffffff80084ce6f0 0000000000000000 ffffffc166e11d00
<6>[ 3.074752] [4: kworker/4:0: 43] max77705_set_usb_phy_completion : suspend complete!
<6>[ 3.074808] [4: kworker/4:0: 43] msm-dwc3 a600000.ssusb: DWC3 in low power mode
<0>[ 3.074868] [1: kworker/u16:2: 410] fd00: ffffff800a6fc900 000000000000019a 000000000000019a ffffffc166d47b00
<0>[ 3.074949] [1: kworker/u16:2: 410] fd20: 00000000ffffffff 00000000ffffffff ffffffc166e6fd40 f83703d0393a6300
<0>[ 3.075030] [1: kworker/u16:2: 410] fd40: ffffffc166e6fd70 ffffff800849d210 ffffff8009eea6d8 ffffff8009eea6d8
<0>[ 3.075111] [1: kworker/u16:2: 410] fd60: ffffffc166d47b00 0000000000000000 ffffffc166e6fda0 ffffff8008340ad0
<0>[ 3.075192] [1: kworker/u16:2: 410] fd80: ffffffc1672b3000 ffffffc166d47b00 ffffffc166e11d00 ffffffc166d47b00
<0>[ 3.075273] [1: kworker/u16:2: 410] fda0: ffffffc166e6fdf0 ffffff8008341580 ffffffc1672b3000 ffffff800a6e8000
<0>[ 3.075354] [1: kworker/u16:2: 410] fdc0: ffffffc166e11d00 000000000000019a 000000000000019a ffffffc166d47b00
<0>[ 3.075435] [1: kworker/u16:2: 410] fde0: ffffffc166e80000 0000000000000000 ffffffc166e6fe70 ffffff8008341778
<0>[ 3.075517] [1: kworker/u16:2: 410] fe00: ffffffc167a2ec00 ffffffc167a2d0c0 ffffff800aa329b8 ffffff800a6e8000
<0>[ 3.075598] [1: kworker/u16:2: 410] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.075678] [1: kworker/u16:2: 410] fe40: 0000000000000000 0000000000000000 ffffffc166e80070 ffffff800a70b0a0
<0>[ 3.075759] [1: kworker/u16:2: 410] fe60: 0000000000000000 f83703d0393a6300 ffffffc166e6fe80 ffffff80081bd000
<0>[ 3.075840] [1: kworker/u16:2: 410] fe80: 0000000000000000 ffffff8008157700 ffffff80081bcef4 ffffffc167a2ec00
<0>[ 3.075921] [1: kworker/u16:2: 410] fea0: 0000000000000000 0000000000000000 ffffff80081bcef4 f83703d0393a6300
<0>[ 3.076001] [1: kworker/u16:2: 410] fec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.076081] [1: kworker/u16:2: 410] fee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.076162] [1: kworker/u16:2: 410] ff00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.076241] [1: kworker/u16:2: 410] ff20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.076321] [1: kworker/u16:2: 410] ff40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.076401] [1: kworker/u16:2: 410] ff60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.076481] [1: kworker/u16:2: 410] ff80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.076560] [1: kworker/u16:2: 410] ffa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.076640] [1: kworker/u16:2: 410] ffc0: 0000000000000000 0000000000800005 0000000000000000 0000000000000000
<0>[ 3.076720] [1: kworker/u16:2: 410] ffe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<4>[ 3.076797] [1: kworker/u16:2: 410] Call trace:
<4>[ 3.076849] [1: kworker/u16:2: 410] Exception stack(0xffffffc166e6fa40 to 0xffffffc166e6fb70)
<4>[ 3.076922] [1: kworker/u16:2: 410] fa40: 0000000000000000 0000007fffffffff ffffffc166e6fc40 ffffff80081bf940
<4>[ 3.077003] [1: kworker/u16:2: 410] fa60: 0000000060c00085 0000000000000025 0000000000000008 0000000000000008
<4>[ 3.077084] [1: kworker/u16:2: 410] fa80: ffffff800aa11000 0000000000000020 ffffffbf05f40e40 0000000000000009
<4>[ 3.077165] [1: kworker/u16:2: 410] faa0: ffffff800aa10900 f83703d0393a6300 ffffffc166e6fb20 ffffff800831cfd4
<4>[ 3.077246] [1: kworker/u16:2: 410] fac0: ffffff800a6e8000 00000000ffffffff ffffffc1739e6500 ffffff80084cd094
<4>[ 3.077327] [1: kworker/u16:2: 410] fae0: 0000000000000001 ffffffc166e11d00 ffffffc166e80000 00000000024000c0
<4>[ 3.077407] [1: kworker/u16:2: 410] fb00: ffffffc1739f0280 f83703d0393a6300 0000000000000080 0000000000000000
<4>[ 3.077487] [1: kworker/u16:2: 410] fb20: ffffffc16723cd80 0000000000000000 0000000000000001 0000000000000000
<4>[ 3.077568] [1: kworker/u16:2: 410] fb40: 000000000000003f 0000000000000000 ffffffc16723ce80 0000000000000000
<4>[ 3.077646] [1: kworker/u16:2: 410] fb60: 00000000026012c0 0000000000000000
<4>[ 3.077710] [1: kworker/u16:2: 410] [<ffffff80081bf940>] __queue_work+0x34/0x4e0
<4>[ 3.077777] [1: kworker/u16:2: 410] [<ffffff80081bfe34>] queue_work_on+0x48/0x64
<4>[ 3.077849] [1: kworker/u16:2: 410] [<ffffff80084ce0d8>] push_file_event_bunch.part.6+0x250/0x27c
<4>[ 3.077925] [1: kworker/u16:2: 410] [<ffffff80084ce6f0>] five_bprm_check+0x118/0x134
<4>[ 3.077997] [1: kworker/u16:2: 410] [<ffffff800849d210>] security_bprm_check+0x60/0x70
<4>[ 3.078070] [1: kworker/u16:2: 410] [<ffffff8008340ad0>] search_binary_handler+0x2c/0x200
<4>[ 3.078142] [1: kworker/u16:2: 410] [<ffffff8008341580>] do_execveat_common.isra.42+0x534/0x700
<4>[ 3.078216] [1: kworker/u16:2: 410] [<ffffff8008341778>] do_execve+0x2c/0x34
<4>[ 3.078284] [1: kworker/u16:2: 410] [<ffffff80081bd000>] call_usermodehelper_exec_async+0x10c/0x178
<4>[ 3.078360] [1: kworker/u16:2: 410] [<ffffff8008157700>] ret_from_fork+0x10/0x50
<0>[ 3.078430] [1: kworker/u16:2: 410] Code: aa0203f4 2a0003fa d53b4220 363812a0 (b94102c0)
<4>[ 3.078501] [1: kworker/u16:2: 410] ---[ end trace 385186df1c042e9b ]---
<6>[ 3.110071] [0: kworker/0:3: 327] mmc0: clock 0Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<1>[ 3.114780] [0: kworker/u16:2: 411] Unable to handle kernel NULL pointer dereference at virtual address 00000100
<1>[ 3.114844] [0: kworker/u16:2: 411] pgd = ffffff800b0ce000
<1>[ 3.114882] [0: kworker/u16:2: 411] [00000100] *pgd=00000001fd5be003, *pud=00000001fd5be003, *pmd=0000000000000000
<4>[ 3.114977] [0: kworker/u16:2: 411] ------------[ cut here ]------------
<2>[ 3.115021] [0: kworker/u16:2: 411] Kernel BUG at ffffff80081bf940 [verbose debug info unavailable]
<0>[ 3.115081] [0: kworker/u16:2: 411] Internal error: Oops: 96000005 [#2] PREEMPT SMP
<4>[ 3.115129] [0: kworker/u16:2: 411] Modules linked in:
<4>[ 3.115167] [0: kworker/u16:2: 411] CPU: 0 PID: 411 Comm: kworker/u16:2 Tainted: G D 4.9.112-klabitV5.9 #1
<4>[ 3.115232] [0: kworker/u16:2: 411] Hardware name: Samsung CROWNQLTE CHN PROJECT Rev10 (DT)
<4>[ 3.115284] [0: kworker/u16:2: 411] task: ffffffc166dcba00 task.stack: ffffffc166ea0000
<4>[ 3.115334] [0: kworker/u16:2: 411] PC is at __queue_work+0x34/0x4e0
<4>[ 3.115377] [0: kworker/u16:2: 411] LR is at queue_work_on+0x48/0x64
<4>[ 3.115419] [0: kworker/u16:2: 411] pc : [<ffffff80081bf940>] lr : [<ffffff80081bfe34>] pstate: 60c001c5
<4>[ 3.115476] [0: kworker/u16:2: 411] sp : ffffffc166ea3c40
<4>[ 3.115513] [0: kworker/u16:2: 411] x29: ffffffc166ea3c40 x28: 0000000000000001
<4>[ 3.115563] [0: kworker/u16:2: 411] x27: 0000000000000000 x26: 0000000000000008
<4>[ 3.115612] [0: kworker/u16:2: 411] x25: 0000000000000008 x24: 0000000000000003
<4>[ 3.115662] [0: kworker/u16:2: 411] x23: ffffff800a6e8000 x22: 0000000000000000
<4>[ 3.115711] [0: kworker/u16:2: 411] x21: 0000000000000008 x20: ffffffc167a2ef00
<4>[ 3.115761] [0: kworker/u16:2: 411] x19: 0000000000000140 x18: 0000000000000001
<4>[ 3.115810] [0: kworker/u16:2: 411] x17: 0000000000000000 x16: ffffffc17ac98d90
<4>[ 3.115860] [0: kworker/u16:2: 411] x15: ffffffc171a22000 x14: 0000000400000003
<4>[ 3.115909] [0: kworker/u16:2: 411] x13: 0000000000000008 x12: 0000000000167a15
<4>[ 3.115960] [0: kworker/u16:2: 411] x11: 0000000000000000 x10: 00000000026012c0
<4>[ 3.116010] [0: kworker/u16:2: 411] x9 : 0000000000000000 x8 : ffffffc167a2f000
<4>[ 3.116060] [0: kworker/u16:2: 411] x7 : 0000000000000000 x6 : 000000000000003f
<4>[ 3.116109] [0: kworker/u16:2: 411] x5 : 0000000000000000 x4 : 0000000000000001
<4>[ 3.116158] [0: kworker/u16:2: 411] x3 : 0000000000000000 x2 : ffffffc167a2ef00
<4>[ 3.116207] [0: kworker/u16:2: 411] x1 : 0000000000000000 x0 : 00000000000001c0
<4>[ 3.116257] [0: kworker/u16:2: 411]
<4>[ 3.116257] [0: kworker/u16:2: 411] PC: 0xffffff80081bf900:
<4>[ 3.116319] [0: kworker/u16:2: 411] f900 91363021 9401ba6b 17ffffef a9ba7bfd 910003fd a9046bf9 a90153f3 a9025bf5
<4>[ 3.116397] [0: kworker/u16:2: 411] f920 a90363f7 a90573fb 2a0003f9 aa0103f6 aa0203f4 2a0003fa d53b4220 363812a0
<4>[ 3.116474] [0: kworker/u16:2: 411] f940 b94102c0 37801360 d000fd38 7100235f 91300318 d000fd15 910042b5 aa1803fb
<4>[ 3.116551] [0: kworker/u16:2: 411] f960 54000ca0 b94102c0 37080ac0 d0012940 f94086d3 91014000 f879d800 8b000273
<4>[ 3.116629] [0: kworker/u16:2: 411]
<4>[ 3.116629] [0: kworker/u16:2: 411] LR: 0xffffff80081bfdf4:
<4>[ 3.116690] [0: kworker/u16:2: 411] fdf4 a90153f3 f90013f5 aa0103f4 2a0003f5 d53b4233 d50342df 52800000 aa0203e1
<4>[ 3.116768] [0: kworker/u16:2: 411] fe14 f9001fa2 940dc7d2 52800001 f9401fa2 350000a0 aa1403e1 2a1503e0 97fffeb7
<4>[ 3.116845] [0: kworker/u16:2: 411] fe34 52800021 d51b4233 a94153f3 f94013f5 2a0103e0 a8c47bfd d65f03c0 aa0003e1
<4>[ 3.116922] [0: kworker/u16:2: 411] fe54 aa0003e2 a9bf7bfd 910003fd b9405800 f9402821 97fffea9 a8c17bfd d65f03c0
<4>[ 3.117000] [0: kworker/u16:2: 411]
<4>[ 3.117000] [0: kworker/u16:2: 411] SP: 0xffffffc166ea3c00:
<4>[ 3.117061] [0: kworker/u16:2: 411] 3c00 081bfe34 ffffff80 66ea3c40 ffffffc1 081bf940 ffffff80 60c001c5 00000000
<4>[ 3.117138] [0: kworker/u16:2: 411] 3c20 66ea3d20 ffffffc1 00002017 00000000 ffffffff ffffffff 00002017 00000000
<4>[ 3.117215] [0: kworker/u16:2: 411] 3c40 66ea3ca0 ffffffc1 081bfe34 ffffff80 00000140 00000000 00000000 00000000
<4>[ 3.117292] [0: kworker/u16:2: 411] 3c60 00000008 00000000 67a2ef00 ffffffc1 0a6e8000 ffffff80 00000003 00000000
<0>[ 3.117371] [0: kworker/u16:2: 411] Process kworker/u16:2 (pid: 411, stack limit = 0xffffffc166ea0000)
<0>[ 3.117428] [0: kworker/u16:2: 411] Stack: (0xffffffc166ea3c40 to 0xffffffc166ea4000)
<0>[ 3.117480] [0: kworker/u16:2: 411] 3c40: ffffffc166ea3ca0 ffffff80081bfe34 0000000000000140 0000000000000000
<0>[ 3.117541] [0: kworker/u16:2: 411] 3c60: 0000000000000008 ffffffc167a2ef00 ffffff800a6e8000 0000000000000003
<0>[ 3.117602] [0: kworker/u16:2: 411] 3c80: ffffffc166ea8000 0000000000000000 0000000000000000 0000000000000001
<0>[ 3.117663] [0: kworker/u16:2: 411] 3ca0: ffffffc166ea3ce0 ffffff80084ce0d8 ffffffc166dcba00 ffffffc167a2ef80
<0>[ 3.117724] [0: kworker/u16:2: 411] 3cc0: ffffffc16f42b7c0 0000000000000001 ffffffc166ea3ce0 ffffffc167a2ef00
<0>[ 3.117785] [0: kworker/u16:2: 411] 3ce0: ffffffc166ea3d40 ffffff80084ce6f0 0000000000000000 ffffffc166dcba00
<0>[ 3.117845] [0: kworker/u16:2: 411] 3d00: ffffff800a6fc900 000000000000019b 000000000000019b ffffffc166d19300
<0>[ 3.117906] [0: kworker/u16:2: 411] 3d20: 00000000ffffffff 00000000ffffffff ffffffc166ea3d40 f83703d0393a6300
<0>[ 3.117968] [0: kworker/u16:2: 411] 3d40: ffffffc166ea3d70 ffffff800849d210 ffffff8009eea6d8 ffffff8009eea6d8
<0>[ 3.118029] [0: kworker/u16:2: 411] 3d60: ffffffc166d19300 0000000000000000 ffffffc166ea3da0 ffffff8008340ad0
<0>[ 3.118091] [0: kworker/u16:2: 411] 3d80: ffffffc167965000 ffffffc166d19300 ffffffc166dcba00 ffffffc166d19300
<0>[ 3.118152] [0: kworker/u16:2: 411] 3da0: ffffffc166ea3df0 ffffff8008341580 ffffffc167965000 ffffff800a6e8000
<0>[ 3.118212] [0: kworker/u16:2: 411] 3dc0: ffffffc166dcba00 000000000000019b 000000000000019b ffffffc166d19300
<0>[ 3.118274] [0: kworker/u16:2: 411] 3de0: ffffffc166ea8000 0000000000000000 ffffffc166ea3e70 ffffff8008341778
<0>[ 3.118335] [0: kworker/u16:2: 411] 3e00: ffffffc16723ce80 ffffffc16723d0c0 ffffff800aa329b8 ffffff800a6e8000
<0>[ 3.118396] [0: kworker/u16:2: 411] 3e20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.118457] [0: kworker/u16:2: 411] 3e40: 0000000000000000 0000000000000000 ffffffc166ea8070 ffffff800a70b0a0
<0>[ 3.118518] [0: kworker/u16:2: 411] 3e60: 0000000000000000 f83703d0393a6300 ffffffc166ea3e80 ffffff80081bd000
<0>[ 3.118579] [0: kworker/u16:2: 411] 3e80: 0000000000000000 ffffff8008157700 ffffff80081bcef4 ffffffc16723ce80
<0>[ 3.118640] [0: kworker/u16:2: 411] 3ea0: 0000000000000000 0000000000000000 ffffff80081bcef4 f83703d0393a6300
<0>[ 3.118701] [0: kworker/u16:2: 411] 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.118761] [0: kworker/u16:2: 411] 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.118822] [0: kworker/u16:2: 411] 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.118884] [0: kworker/u16:2: 411] 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.118945] [0: kworker/u16:2: 411] 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.119006] [0: kworker/u16:2: 411] 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.119067] [0: kworker/u16:2: 411] 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.119128] [0: kworker/u16:2: 411] 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<0>[ 3.119188] [0: kworker/u16:2: 411] 3fc0: 0000000000000000 0000000000800005 0000000000000000 0000000000000000
<0>[ 3.119249] [0: kworker/u16:2: 411] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
<4>[ 3.119308] [0: kworker/u16:2: 411] Call trace:
<4>[ 3.119342] [0: kworker/u16:2: 411] Exception stack(0xffffffc166ea3a40 to 0xffffffc166ea3b70)
<4>[ 3.119396] [0: kworker/u16:2: 411] 3a40: 0000000000000140 0000007fffffffff ffffffc166ea3c40 ffffff80081bf940
<4>[ 3.119457] [0: kworker/u16:2: 411] 3a60: 0000000060c001c5 0000000000000025 0000000000000008 0000000000000008
<4>[ 3.119518] [0: kworker/u16:2: 411] 3a80: ffffff800aa11000 0000000000000020 ffffffbf05f41f80 0000000000000009
<4>[ 3.119579] [0: kworker/u16:2: 411] 3aa0: ffffff800aa10900 f83703d0393a6300 ffffffc166ea3b20 ffffff800831cfd4
<4>[ 3.119640] [0: kworker/u16:2: 411] 3ac0: ffffff800a6e8000 00000000ffffffff ffffffc1739e6500 ffffff80084cd094
<4>[ 3.119701] [0: kworker/u16:2: 411] 3ae0: 0000000000000000 ffffffc166dcba00 ffffffc166ea8000 00000000024000c0
<4>[ 3.119763] [0: kworker/u16:2: 411] 3b00: ffffffc1739f0280 f83703d0393a6300 00000000000001c0 0000000000000000
<4>[ 3.119824] [0: kworker/u16:2: 411] 3b20: ffffffc167a2ef00 0000000000000000 0000000000000001 0000000000000000
<4>[ 3.119884] [0: kworker/u16:2: 411] 3b40: 000000000000003f 0000000000000000 ffffffc167a2f000 0000000000000000
<4>[ 3.119947] [0: kworker/u16:2: 411] 3b60: 00000000026012c0 0000000000000000
<4>[ 3.119996] [0: kworker/u16:2: 411] [<ffffff80081bf940>] __queue_work+0x34/0x4e0
<4>[ 3.120048] [0: kworker/u16:2: 411] [<ffffff80081bfe34>] queue_work_on+0x48/0x64
<4>[ 3.120103] [0: kworker/u16:2: 411] [<ffffff80084ce0d8>] push_file_event_bunch.part.6+0x250/0x27c
<4>[ 3.120178] [0: kworker/u16:2: 411] [<ffffff80084ce6f0>] five_bprm_check+0x118/0x134
<4>[ 3.120250] [0: kworker/u16:2: 411] [<ffffff800849d210>] security_bprm_check+0x60/0x70
<4>[ 3.120321] [0: kworker/u16:2: 411] [<ffffff8008340ad0>] search_binary_handler+0x2c/0x200
<4>[ 3.120391] [0: kworker/u16:2: 411] [<ffffff8008341580>] do_execveat_common.isra.42+0x534/0x700
<4>[ 3.120465] [0: kworker/u16:2: 411] [<ffffff8008341778>] do_execve+0x2c/0x34
<4>[ 3.120530] [0: kworker/u16:2: 411] [<ffffff80081bd000>] call_usermodehelper_exec_async+0x10c/0x178
<4>[ 3.120605] [0: kworker/u16:2: 411] [<ffffff8008157700>] ret_from_fork+0x10/0x50
<0>[ 3.120673] [0: kworker/u16:2: 411] Code: aa0203f4 2a0003fa d53b4220 363812a0 (b94102c0)
<6>[ 3.120738] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x10 Value: 0x16
<4>[ 3.120808] [0: kworker/u16:2: 411] ---[ end trace 385186df1c042e9c ]---
<6>[ 3.140498] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x10 Value: 0x16
<6>[ 3.140498] [4: kworker/4:0: 43]
<6>[ 3.141233] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x5 Value: 0x0
<6>[ 3.142123] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x5 Value: 0x0
<6>[ 3.142123] [4: kworker/4:0: 43]
<6>[ 3.142836] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x11 Value: 0x20
<6>[ 3.143726] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x11 Value: 0x20
<6>[ 3.143726] [4: kworker/4:0: 43]
<6>[ 3.144444] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x20 Value: 0x0
<6>[ 3.145337] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x20 Value: 0x0
<6>[ 3.145337] [4: kworker/4:0: 43]
<6>[ 3.146052] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x23 Value: 0x0
<6>[ 3.146942] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x23 Value: 0x0
<6>[ 3.146942] [4: kworker/4:0: 43]
<6>[ 3.147654] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x24 Value: 0x44
<6>[ 3.148544] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x24 Value: 0x44
<6>[ 3.148544] [4: kworker/4:0: 43]
<6>[ 3.149257] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x26 Value: 0x0
<6>[ 3.150143] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x26 Value: 0x0
<6>[ 3.150143] [4: kworker/4:0: 43]
<6>[ 3.150836] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x27 Value: 0x2f
<6>[ 3.151709] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x27 Value: 0x2f
<6>[ 3.151709] [4: kworker/4:0: 43]
<6>[ 3.152413] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x28 Value: 0x0
<6>[ 3.153159] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 0 0 0
<6>[ 3.153227] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: sleep changed
<6>[ 3.153291] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x28 Value: 0x0
<6>[ 3.153291] [4: kworker/4:0: 43]
<6>[ 3.153996] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x29 Value: 0x0
<5>[ 3.154624] [1: swapper/0: 1] Loaded X.509 cert 'Build time autogenerated kernel key: 90574e2dd52228f876e7d689d513d6e3e4d392e1'
<6>[ 3.154868] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x29 Value: 0x0
<6>[ 3.154868] [4: kworker/4:0: 43]
<6>[ 3.155072] [1: swapper/0: 1] zswap: loaded using pool zstd/zsmalloc
<5>[ 3.155465] [1: swapper/0: 1] Loaded X.509 cert 'CRONUS-07: cronus-07secadmin
signing key: fe7a8343698a95507edd96ed880c59aa623430a9': built-in
<6>[ 3.155603] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x2a Value: 0x0
<6>[ 3.155683] [0: swapper/0: 1] PROCA was initialized
<6>[ 3.156474] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x2a Value: 0x0
<6>[ 3.156474] [4: kworker/4:0: 43]
<6>[ 3.157172] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x2b Value: 0x4
<6>[ 3.158034] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x2b Value: 0x4
<6>[ 3.158034] [4: kworker/4:0: 43]
<6>[ 3.158731] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x30 Value: 0x9
<6>[ 3.159614] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x30 Value: 0x9
<6>[ 3.159614] [4: kworker/4:0: 43]
<6>[ 3.160330] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x31 Value: 0x9
<6>[ 3.161172] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x31 Value: 0x9
<6>[ 3.161172] [4: kworker/4:0: 43]
<6>[ 3.161845] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x32 Value: 0x20
<6>[ 3.162687] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x32 Value: 0x20
<6>[ 3.162687] [4: kworker/4:0: 43]
<6>[ 3.163358] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x33 Value: 0x20
<6>[ 3.164195] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x33 Value: 0x20
<6>[ 3.164195] [4: kworker/4:0: 43]
<6>[ 3.164869] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x34 Value: 0xc
<6>[ 3.165710] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x34 Value: 0xc
<6>[ 3.165710] [4: kworker/4:0: 43]
<6>[ 3.166381] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x35 Value: 0x14
<6>[ 3.167219] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x35 Value: 0x14
<6>[ 3.167219] [4: kworker/4:0: 43]
<6>[ 3.167890] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x36 Value: 0x8
<6>[ 3.168725] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x36 Value: 0x8
<6>[ 3.168725] [4: kworker/4:0: 43]
<6>[ 3.169390] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x37 Value: 0x8
<6>[ 3.170234] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x37 Value: 0x8
<6>[ 3.170234] [4: kworker/4:0: 43]
<6>[ 3.170913] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x40 Value: 0x0
<6>[ 3.171754] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x40 Value: 0x0
<6>[ 3.171754] [4: kworker/4:0: 43]
<6>[ 3.172427] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x41 Value: 0x0
<6>[ 3.173265] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x41 Value: 0x0
<6>[ 3.173265] [4: kworker/4:0: 43]
<6>[ 3.173937] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x42 Value: 0x0
<6>[ 3.174774] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x42 Value: 0x0
<6>[ 3.174774] [4: kworker/4:0: 43]
<6>[ 3.175445] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x43 Value: 0x0
<6>[ 3.176279] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x43 Value: 0x0
<6>[ 3.176279] [4: kworker/4:0: 43]
<6>[ 3.176950] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x44 Value: 0x0
<6>[ 3.177784] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x44 Value: 0x0
<6>[ 3.177784] [4: kworker/4:0: 43]
<6>[ 3.178449] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x45 Value: 0x5
<6>[ 3.179285] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x45 Value: 0x5
<6>[ 3.179285] [4: kworker/4:0: 43]
<6>[ 3.179955] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x46 Value: 0x0
<6>[ 3.180841] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x46 Value: 0x0
<6>[ 3.180841] [4: kworker/4:0: 43]
<6>[ 3.181485] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x47 Value: 0x0
<6>[ 3.182287] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x47 Value: 0x0
<6>[ 3.182287] [4: kworker/4:0: 43]
<6>[ 3.182940] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x48 Value: 0x0
<6>[ 3.183349] [7: swapper/0: 1] spss_utils [spss_init]: spss-utils driver Ver 2.0 30-Mar-2017.
<6>[ 3.183712] [7: swapper/0: 1] spss_utils [spss_probe]: Initialization completed ok, firmware_name [spss2p].
<6>[ 3.183769] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x48 Value: 0x0
<6>[ 3.183769] [4: kworker/4:0: 43]
<6>[ 3.184406] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x49 Value: 0x0
<6>[ 3.185205] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x49 Value: 0x0
<6>[ 3.185205] [4: kworker/4:0: 43]
<6>[ 3.185848] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x4a Value: 0x0
<6>[ 3.186648] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 31
<6>[ 3.186708] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x4a Value: 0x0
<6>[ 3.186708] [4: kworker/4:0: 43]
<6>[ 3.187344] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x4b Value: 0x0
<6>[ 3.187488] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 32
<6>[ 3.188011] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 33
<6>[ 3.188141] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x4b Value: 0x0
<6>[ 3.188141] [4: kworker/4:0: 43]
<6>[ 3.188529] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 34
<6>[ 3.188785] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x4c Value: 0x0
<6>[ 3.189046] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 35
<6>[ 3.189585] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x4c Value: 0x0
<6>[ 3.189585] [4: kworker/4:0: 43]
<6>[ 3.189656] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 36
<6>[ 3.190146] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 37
<6>[ 3.190319] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x4d Value: 0x0
<6>[ 3.190678] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 38
<6>[ 3.191116] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x4d Value: 0x0
<6>[ 3.191116] [4: kworker/4:0: 43]
<6>[ 3.191191] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 39
<6>[ 3.191821] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x4e Value: 0x80
<6>[ 3.192289] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 40
<4>[ 3.192452] [7: swapper/0: 1] fastrpc: probe of soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 failed with error -1
<6>[ 3.192550] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 41
<6>[ 3.192623] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x4e Value: 0x80
<6>[ 3.192623] [4: kworker/4:0: 43]
<6>[ 3.193066] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 42
<6>[ 3.193262] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x4f Value: 0xc
<6>[ 3.194063] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x4f Value: 0xc
<6>[ 3.194063] [4: kworker/4:0: 43]
<4>[ 3.194134] [7: swapper/0: 1] fastrpc: probe of soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 failed with error -1
<4>[ 3.194207] [7: swapper/0: 1] CHRDEV "adsprpc-smd" major number 216 goes below the dynamic allocation range
<6>[ 3.194775] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x50 Value: 0x0
<3>[ 3.195137] [7: swapper/0: 1] register_client_adhoc:find path.src 1 dest 590
<3>[ 3.195334] [7: swapper/0: 1] register_client_adhoc:Client handle 42 mdss_reg
<3>[ 3.195397] [7: swapper/0: 1] register_client_adhoc:find path.src 22 dest 512
<3>[ 3.195568] [7: swapper/0: 1] register_client_adhoc:find path.src 23 dest 512
<6>[ 3.195612] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x50 Value: 0x0
<6>[ 3.195612] [4: kworker/4:0: 43]
<3>[ 3.195811] [7: swapper/0: 1] register_client_adhoc:Client handle 43 mdss_sde
<6>[ 3.195888] [7: swapper/0: 1] [drm:sde_dbg_init:3474] evtlog_status: enable:7, panic:1, dump:1
<6>[ 3.195951] [7: swapper/0: 1] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops sde_rsc_comp_ops)
<6>[ 3.196016] [7: swapper/0: 1] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops sde_wb_comp_ops)
<6>[ 3.196078] [7: swapper/0: 1] [drm-dp] secdp_power_request_gpios: invalid power data
<6>[ 3.196127] [7: swapper/0: 1] [drm-dp] secdp_init: DRM DP gpio request failed
<6>[ 3.196252] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x51 Value: 0x0
<6>[ 3.196826] [7: swapper/0: 1] [drm-dp] secdp_init: exit, rc(0)
<6>[ 3.196871] [7: swapper/0: 1] msm_drm ae00000.qcom,mdss_mdp: bound ae90000.qcom,dp_display (ops dp_display_comp_ops)
<6>[ 3.197071] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x51 Value: 0x0
<6>[ 3.197071] [4: kworker/4:0: 43]
<3>[ 3.197144] [7: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: function 'ub_detect' not supported
<3>[ 3.197199] [7: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: invalid function ub_detect in map table
<3>[ 3.197265] [7: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: function 'ub_detect' not supported
<3>[ 3.197321] [7: swapper/0: 1] sdm845-v2-pinctrl 3400000.pinctrl: invalid function ub_detect in map table
<6>[ 3.197413] [7: swapper/0: 1] dpui_logging_register register type CTRL
<3>[ 3.197457] [7: swapper/0: 1] [SDE] ss_smmu_debug_init : sec_debug_is_enabled : 0
<3>[ 3.197504] [7: swapper/0: 1] [SDE] ss_panel_init : Fail to create smmu debug
<3>[ 3.197551] [7: swapper/0: 1] [SDE] samsung_panel_init : ss_dsi_panel_S6E3HA8_AMB638RD01_WQHD
<6>[ 3.197605] [7: swapper/0: 1] [SDE] ss_copr_init : ++
<6>[ 3.197828] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x52 Value: 0x0
<6>[ 3.197945] [7: swapper/0: 1] [SDE] ss_copr_init : read_addr (5a) read_size (9) on (1)
<6>[ 3.197995] [7: swapper/0: 1] [SDE] ss_copr_init : Success to initialized copr ..
<6>[ 3.198076] [7: swapper/0: 1] dpui_logging_register register type PANEL
<6>[ 3.198120] [7: swapper/0: 1] [SDE] ss_panel_attach_set : panel_attach_status : 1
<6>[ 3.198232] [7: swapper/0: 1] [SDE] ss_create_sysfs : Success to find SVC
<6>[ 3.198278] [7: swapper/0: 1] [SDE] ss_create_sysfs : Success to create panel sysfs svc/OCTA..
<6>[ 3.198350] [7: swapper/0: 1] dpui_logging_register register type PANEL
<6>[ 3.198393] [7: swapper/0: 1] [SDE] ss_create_sysfs : done!!
<3>[ 3.198440] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : LP11 init disabled
<3>[ 3.198498] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : ESC CLK 128M enabled
<3>[ 3.198544] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : alpm enable enabled
<3>[ 3.198593] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : hall_ic disabled
<6>[ 3.198634] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x52 Value: 0x0
<6>[ 3.198634] [4: kworker/4:0: 43]
<3>[ 3.198717] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : lcd_flip_delay_ms 0
<6>[ 3.198766] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : OSC TE fitting disabled
<6>[ 3.198817] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : hmt enabled
<6>[ 3.198863] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : tcon clk on support: disabled
<6>[ 3.198922] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : tft_common_support disabled
<6>[ 3.198982] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : backlight_gpio_config disabled
<3>[ 3.199038] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : 2664, backlight_tft_gpio gpio1 not specified
<3>[ 3.199099] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : 2664, backlight_tft_gpio gpio2 not specified
<3>[ 3.199160] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : 2664, backlight_tft_gpio gpio3 not specified
<3>[ 3.199222] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : 2664, backlight_tft_gpio gpio4 not specified
<6>[ 3.199275] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x53 Value: 0x0
<6>[ 3.199350] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : [POC] is_support = 1
<6>[ 3.199396] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : [POC] image_size (536706)
<6>[ 3.199446] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : [POC][ERASE] delay_us(400000) addr idx (3 4 5)
<6>[ 3.199509] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : [POC][WRITE] delay_us(10) data_size(1) loo_cnt(256) addr idx (6 7 8)
<6>[ 3.199578] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : read addr idx (6 7 8)
<6>[ 3.199624] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : [POC][READ] delay_us(250) addr idx (6 7 8)
<6>[ 3.199679] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : vdd->pac = 1
<6>[ 3.199731] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : lpm_power_control enabled
<6>[ 3.199795] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : lpm_power_control Supply Name=vddr, Min=1500000, Max=1500000
<6>[ 3.199874] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : lpm_power_control ELVSS Name=s2dos05-elvss, lpm=2000, normal=8000
<6>[ 3.199945] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : vdd->dyn_mipi_clk.is_support = 0
<3>[ 3.200007] [7: swapper/0: 1] [SDE] ss_parse_candella_mapping_table : Success to read table samsung,candela_map_table_revA
<6>[ 3.200096] [7: swapper/0: 1] [SDE] ss_parse_candella_mapping_table : tab_size (74), hbm min/max lv (0/255)
<6>[ 3.200151] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x53 Value: 0x0
<6>[ 3.200151] [4: kworker/4:0: 43]
<3>[ 3.200240] [7: swapper/0: 1] [SDE] ss_parse_candella_mapping_table : Success to read table samsung,aod_candela_map_table_revA
<6>[ 3.200306] [7: swapper/0: 1] [SDE] ss_parse_candella_mapping_table : tab_size (4), hbm min/max lv (0/25500)
<3>[ 3.200372] [7: swapper/0: 1] [SDE] ss_parse_pac_candella_mapping_table : Success to read table samsung,pac_candela_map_table_revA
<6>[ 3.200448] [7: swapper/0: 1] [SDE] ss_parse_pac_candella_mapping_table : tab_size (512), hbm min/max lv (0/25500)
<3>[ 3.200511] [7: swapper/0: 1] [SDE] ss_parse_hbm_candella_mapping_table : Success to read table samsung,pac_hbm_candela_map_table_revA
<6>[ 3.200582] [7: swapper/0: 1] [SDE] ss_parse_hbm_candella_mapping_table : tab_size (60), hbm min/max lv (25800/44700)
<3>[ 3.200648] [7: swapper/0: 1] [SDE] ss_parse_panel_table : Success to read table samsung,acl_map_table_revA
<3>[ 3.200728] [7: swapper/0: 1] [SDE] ss_parse_candella_mapping_table : Success to read table samsung,hmt_candela_map_table_revA
<6>[ 3.200791] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x54 Value: 0x0
<6>[ 3.200845] [7: swapper/0: 1] [SDE] ss_parse_candella_mapping_table : tab_size (37), hbm min/max lv (0/255)
<6>[ 3.201578] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x54 Value: 0x0
<6>[ 3.201578] [4: kworker/4:0: 43]
<6>[ 3.202214] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x6 Value: 0x0
<6>[ 3.203007] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x6 Value: 0x0
<6>[ 3.203007] [4: kworker/4:0: 43]
<6>[ 3.203640] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x7 Value: 0x80
<6>[ 3.204431] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x7 Value: 0x80
<6>[ 3.204431] [4: kworker/4:0: 43]
<6>[ 3.205061] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Write Reg: 0x2d Value: 0x8
<6>[ 3.205850] [4: kworker/4:0: 43] [SX9320]: sx9320_initialize_register - Read Reg: 0x2d Value: 0x8
<6>[ 3.205850] [4: kworker/4:0: 43]
<3>[ 3.210658] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_get_cmd_pkt_count:1894] format error
<3>[ 3.210709] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_cmd_sets_sub:2003] commands failed, rc=-22
<6>[ 3.218069] [7: swapper/0: 1] [SDE] ss_panel_parse_dt_esd : [ESD] gpio : 2031, irq : 61
<6>[ 3.218127] [7: swapper/0: 1] [SDE] ss_panel_parse_dt_esd : samsung esd enabled mode (3)
<6>[ 3.218184] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : gamma_step hbm: 12 normal: 74 hmt: 37
<6>[ 3.218249] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : flash_gamma_size gamma:34 aor:2 vint:1 elvss:3 irc:17
<6>[ 3.218318] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : flash_table_hbm_addr aor: 0x9d4 vint:0xa80 elvss 0xad6 hbm:0xbd8
<6>[ 3.218394] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : flash_table__normal_addr gamma:0x0 aor: 0x9ec vint:0xa8c elvss 0xafa hbm:0xca4
<6>[ 3.218468] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : flash_table_hmt_addr gamma:0x118e aor: 0x1678
<6>[ 3.218891] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : write_check_addr: 0xa16c4
<6>[ 3.218951] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : start_bank[0] : 0xa0000 end_bank[0]: 0xa16c1
<6>[ 3.219012] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : check_sum_start_offset : 0x16c2 check_sum_end_offset: 0x16c3
<6>[ 3.219092] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : flash_gamma 0xC8 start_addr:0x2000 end_addr: 0x2021 size: 0x22 check_sum_start : 0x2022 check_sum_end: 0x2023
<6>[ 3.219188] [7: swapper/0: 1] [SDE] ss_panel_parse_dt : flash_gamma MCD1_R:0xb8000 MCD2_R:0xb8001 MCD1_L:0xb8004 MCD2_L:0xb8005
<6>[ 3.219254] [7: swapper/0: 1] [SDE] ss_dsi_poc_init : ++
<6>[ 3.219316] [7: swapper/0: 1] dpui_logging_register register type PANEL
<6>[ 3.219359] [7: swapper/0: 1] [SDE] ss_dsi_poc_init : --
<6>[ 3.219410] [7: swapper/0: 1] [SDE] self_display_init : Success to register self_disp device..(0)
<6>[ 3.219464] [7: swapper/0: 1] [SDE] ss_check_inval_te_period_init : status_mode = 3
<6>[ 3.219560] [7: swapper/0: 1] msm-dsi-display:[dsi_display_bind] Successfully bind display panel 'ss_dsi_panel_S6E3HA8_AMB638RD01_WQHD'
<6>[ 3.219631] [7: swapper/0: 1] msm-dsi-display:[dsi_display_register_te_irq] dsi_display_register_te_irq: status_mode=3, not ESD_MODE_PANEL_TE, skip!
<6>[ 3.219711] [7: swapper/0: 1] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display@13 (ops dsi_display_comp_ops)
<6>[ 3.219786] [7: swapper/0: 1] [drm] mapped mdp address space @0000000000000000
<3>[ 3.219862] [7: swapper/0: 1] msm_drm ae00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys
<6>[ 3.219936] [7: swapper/0: 1] [drm:_sde_kms_get_splash_data:3319] found continuous splash base address:9d400000 size:800000
<6>[ 3.221798] [7: swapper/0: 1] [drm:sde_kms_hw_init:3441] sde hardware revision:0x40000001
<6>[ 3.222348] [7: swapper/0: 1] [drm:sde_mixer_parse_dt:1523] sde_mixer_parse_dt mixer_count = 4
<3>[ 3.222528] [7: swapper/0: 1] [drm:reg_dmav1_init_dspp_op_v4] *ERROR* invalid feature map 9 for feature 10
<3>[ 3.222588] [7: swapper/0: 1] [drm:reg_dmav1_init_dspp_op_v4] *ERROR* invalid feature map 9 for feature 10
<3>[ 3.222648] [7: swapper/0: 1] [drm:reg_dmav1_init_dspp_op_v4] *ERROR* invalid feature map 9 for feature 10
<3>[ 3.222707] [7: swapper/0: 1] [drm:reg_dmav1_init_dspp_op_v4] *ERROR* invalid feature map 9 for feature 10
<3>[ 3.226024] [7: swapper/0: 1] [drm:alloc_reg_dma_buf_v1] *ERROR* failed to get aspace
<6>[ 3.226078] [7: swapper/0: 1] Failed to allocate reg dma, ret:18446744073709551594
<6>[ 3.226130] [7: swapper/0: 1] [drm] Created domain mdp_ns [80000000,80000000] secure=0
<6>[ 3.227501] [7: swapper/0: 1] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 43
<6>[ 3.227696] [7: swapper/0: 1] [drm] probing device qcom,smmu_sde_sec
<6>[ 3.227742] [7: swapper/0: 1] [drm] Created domain mdp_s [80000000,80000000] secure=1
<6>[ 3.229661] [7: swapper/0: 1] [drm-dp] dp_bridge_attach: [0] attached
<6>[ 3.229757] [7: swapper/0: 1] [drm-dp] dp_parser_parse: +++
<6>[ 3.229822] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg0-settings offset=0x20, cfg_cnt=1
<6>[ 3.229878] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg0-settings lut[0]=0x0
<6>[ 3.229928] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg1-settings offset=0x24, cfg_cnt=3
<6>[ 3.229983] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg1-settings lut[1]=0x13
<6>[ 3.230099] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg1-settings lut[1]=0x23
<6>[ 3.230149] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg1-settings lut[1]=0x1d
<6>[ 3.230199] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg2-settings offset=0x28, cfg_cnt=1
<6>[ 3.230255] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg2-settings lut[2]=0x24
<6>[ 3.230304] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg3-settings offset=0x2c, cfg_cnt=1
<6>[ 3.230358] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg3-settings lut[3]=0x0
<6>[ 3.230409] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg4-settings offset=0x30, cfg_cnt=1
<6>[ 3.230464] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg4-settings lut[4]=0xa
<6>[ 3.230513] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg5-settings offset=0x34, cfg_cnt=1
<6>[ 3.230567] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg5-settings lut[5]=0x26
<6>[ 3.230617] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg6-settings offset=0x38, cfg_cnt=1
<6>[ 3.230672] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg6-settings lut[6]=0xa
<6>[ 3.230722] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg7-settings offset=0x3c, cfg_cnt=1
<6>[ 3.230776] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg7-settings lut[7]=0x3
<6>[ 3.230826] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg8-settings offset=0x40, cfg_cnt=1
<6>[ 3.230881] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg8-settings lut[8]=0xbb
<6>[ 3.230931] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg9-settings offset=0x44, cfg_cnt=1
<6>[ 3.230985] [7: swapper/0: 1] [drm-dp] dp_parser_aux: qcom,aux-cfg9-settings lut[9]=0x3
<6>[ 3.231049] [7: swapper/0: 1] [drm-dp] dp_parser_clock: clock parsing successful
<6>[ 3.231098] [7: swapper/0: 1] [drm-dp] dp_parser_get_vreg: vreg found. count=1
<6>[ 3.231147] [7: swapper/0: 1] [drm-dp] dp_parser_get_vreg: gdsc min=0, max=0, enable=0, disable=0
<6>[ 3.231201] [7: swapper/0: 1] [drm-dp] dp_parser_get_vreg: vreg found. count=1
<6>[ 3.231248] [7: swapper/0: 1] [drm-dp] dp_parser_get_vreg: vdda-1p2 min=1200000, max=1200000, enable=21800, disable=4
<6>[ 3.231311] [7: swapper/0: 1] [drm-dp] dp_parser_get_vreg: vreg found. count=1
<6>[ 3.231359] [7: swapper/0: 1] [drm-dp] dp_parser_get_vreg: vdda-0p9 min=880000, max=880000, enable=36000, disable=32
<6>[ 3.231454] [7: swapper/0: 1] [drm-dp] secdp_get_aux_pullup_vreg: get aux_pullup vdd success
<6>[ 3.231526] [7: swapper/0: 1] [drm-dp] secdp_get_usb1_ss_core_vreg: get usb1_ss_core vdd success
<6>[ 3.231587] [7: swapper/0: 1] [drm-dp] dp_parser_gpio: name(qcom,aux-en-gpio) gpio(7) value(0)
<6>[ 3.231641] [7: swapper/0: 1] [drm-dp] dp_parser_gpio: name(qcom,aux-sel-gpio) gpio(100) value(0)
<6>[ 3.231697] [7: swapper/0: 1] [drm-dp] dp_parser_gpio: name(qcom,usbplug-cc-gpio) gpio(38) value(0)
<4>[ 3.232205] [7: swapper/0: 1] CHRDEV "secdp_aux" major number 215 goes below the dynamic allocation range
<3>[ 3.232369] [7: swapper/0: 1] i2c i2c-33: of_i2c: modalias failure on /soc/qcom,dp_display@0/qcom,ctrl-supply-entries
<4>[ 3.232434] [7: swapper/0: 1] i2c i2c-33: Failed to create I2C device for /soc/qcom,dp_display@0/qcom,ctrl-supply-entries
<3>[ 3.232500] [7: swapper/0: 1] i2c i2c-33: of_i2c: modalias failure on /soc/qcom,dp_display@0/qcom,phy-supply-entries
<4>[ 3.232563] [7: swapper/0: 1] i2c i2c-33: Failed to create I2C device for /soc/qcom,dp_display@0/qcom,phy-supply-entries
<3>[ 3.232627] [7: swapper/0: 1] i2c i2c-33: of_i2c: modalias failure on /soc/qcom,dp_display@0/qcom,core-supply-entries
<4>[ 3.232691] [7: swapper/0: 1] i2c i2c-33: Failed to create I2C device for /soc/qcom,dp_display@0/qcom,core-supply-entries
<6>[ 3.233237] [7: swapper/0: 1] msm_ext_disp_get_intf_data: Display not found (EXT_DISPLAY_TYPE_DP)
<6>[ 3.233294] [7: swapper/0: 1] msm_ext_disp_add_intf_data: Added new display (EXT_DISPLAY_TYPE_DP)
<6>[ 3.233348] [7: swapper/0: 1] msm_ext_disp_register_intf: EXT_DISPLAY_TYPE_DP registered
<6>[ 3.233765] [7: swapper/0: 1] [sde-hdcp1x] sde_hdcp_1x_init: HDCP module initialized. HDCP_STATE=HDCP_STATE_INACTIVE
<6>[ 3.233828] [7: swapper/0: 1] [drm-dp] dp_display_initialize_hdcp: HDCP 1.3 initialized
<6>[ 3.234434] [7: swapper/0: 1] [drm-dp] dp_display_initialize_hdcp: HDCP 2.2 initialized
<6>[ 3.234484] [7: swapper/0: 1] [drm-dp] dp_display_post_init: success
<6>[ 3.237125] [7: swapper/0: 1] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[ 3.237177] [7: swapper/0: 1] [drm] No driver support for vblank timestamp query.
<3>[ 3.237837] [7: swapper/0: 1] [drm:_sde_crtc_set_input_fence_timeout:2546] input_fence_timeout_ns 20000000000
<3>[ 3.237837] [7: swapper/0: 1]
<3>[ 3.237921] [7: swapper/0: 1] [drm:_sde_crtc_set_input_fence_timeout:2546] input_fence_timeout_ns 20000000000
<3>[ 3.237921] [7: swapper/0: 1]
<3>[ 3.238004] [7: swapper/0: 1] [drm:_sde_crtc_set_input_fence_timeout:2546] input_fence_timeout_ns 20000000000
<3>[ 3.238004] [7: swapper/0: 1]
<6>[ 3.238094] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU7
<6>[ 3.238190] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 3.238291] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 3.238360] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [720, 720, 40, 40, 720, 40]
<6>[ 3.238427] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU7
<6>[ 3.238516] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 3.238606] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 3.238673] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [540, 540, 30, 30, 540, 30]
<6>[ 3.238740] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU7
<6>[ 3.238829] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 3.238923] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 3.238990] [7: swapper/0: 1] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [360, 360, 74, 74, 360, 74]
<6>[ 3.239139] [7: swapper/0: 1] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 587 registered
<6>[ 3.248255] [7: swapper/0: 1] [drm-dp] dp_display_probe: exit, rc(0)
<3>[ 3.248903] [7: kworker/7:1: 388] register_client_adhoc:find path.src 1 dest 590
<3>[ 3.249060] [7: kworker/7:1: 388] register_client_adhoc:Client handle 44 sde_reg
<6>[ 3.249152] [7: kworker/7:1: 388] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 44
<6>[ 3.249269] [7: kworker/7:1: 388] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
<6>[ 3.249355] [7: kworker/7:1: 388] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 45
<6>[ 3.249451] [7: kworker/7:1: 388] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
<3>[ 3.249550] [7: kworker/7:1: 388] register_client_adhoc:find path.src 25 dest 512
<3>[ 3.249683] [7: kworker/7:1: 388] register_client_adhoc:Client handle 45 mdss_rotator
<3>[ 3.249732] [7: kworker/7:1: 388] register_client_adhoc:find path.src 1 dest 590
<3>[ 3.249855] [7: kworker/7:1: 388] register_client_adhoc:Client handle 46 mdss_rot_reg
<3>[ 3.250609] [7: kworker/7:1: 388] No change in context(0==0), skip
<6>[ 3.254048] [7: kworker/7:1: 388] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:1, dump:1
<6>[ 3.258366] [7: kworker/7:1: 388] sde_rotator ae00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
<6>[ 3.259151] [4: swapper/0: 1] iommu: Adding device 171c0000.slim:qcom,iommu_slim_ctrl_cb to group 46
<6>[ 3.262232] [4: swapper/0: 1] usb_notifier: notifier_probe
<6>[ 3.262272] [4: swapper/0: 1] usb_notifier: There is not USB 3.0 redriver pin
<3>[ 3.262319] [4: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt: usb30_redriver_en: Invalied gpio pins
<6>[ 3.262377] [4: swapper/0: 1] usb_notifier: redriver_en : -2
<6>[ 3.262415] [4: swapper/0: 1] usb_notifier: disable_control_en : 1
<6>[ 3.262458] [4: swapper/0: 1] usb_notify: registered otg_notify +
<6>[ 3.262782] [4: swapper/0: 1] usb_notify: ovc_init
<3>[ 3.262865] [4: swapper/0: 1] usb_notify: register_usblog_proc already registered
<6>[ 3.262913] [4: swapper/0: 1] usb_notify: registered otg_notify -
<6>[ 3.262954] [4: swapper/0: 1] usb: [M] manager_notifier_register: listener=22 register
<6>[ 3.263003] [4: swapper/0: 1] ccic_notifier_init
<3>[ 3.263036] [4: swapper/0: 1] ccic_notifier_init already registered
<6>[ 3.263079] [4: swapper/0: 1] usb: [M] manager_notifier_register USB: attach=0, drp=USB_DETACH
<6>[ 3.263132] [4: swapper/0: 1] usb_notifier: ccic_usb_handle_notification: Turn Off Device(UFP)
<6>[ 3.263186] [4: swapper/0: 1] usb_notify: send_otg_notify event=vbus(1) enable=0
<6>[ 3.263233] [4: swapper/0: 1] usb_notify: send_otg_notify reserve event
<6>[ 3.263276] [4: swapper/0: 1] vbus_notifier_register: listener=2 register
<6>[ 3.263320] [4: swapper/0: 1] usb_notifier: vbus_handle_notification cmd=1, vbus_type=LOW
<6>[ 3.263370] [4: swapper/0: 1] usb_notify: send_otg_notify event=vbus_power(25) enable=0
<6>[ 3.263420] [4: swapper/0: 1] usb_notify: extra_notifier_callback event=vbus_power(25)
<6>[ 3.263469] [4: swapper/0: 1] usb_notify: extra_notify_state+ event=vbus_power(25), enable=off
<6>[ 3.263524] [4: swapper/0: 1] usb_notify: extra_notify_state- event=vbus_power(25), cable=none
<6>[ 3.263576] [4: swapper/0: 1] usb_notifier soc:usb-notifier: usb notifier probe
<6>[ 3.263918] [4: swapper/0: 1] usb: [M] manager_notifier_init
<6>[ 3.263957] [4: swapper/0: 1] ccic_notifier_init
<3>[ 3.263990] [4: swapper/0: 1] ccic_notifier_init already registered
<3>[ 3.264030] [4: swapper/0: 1] manager_notifier_init already registered
<6>[ 3.264583] [4: swapper/0: 1] input: soc:gpio_keys as /devices/platform/soc/soc:gpio_keys/input/input9
<6>[ 3.264665] [4: swapper/0: 1] [sec_input] gpio_keys_gpio_report_event: 115, 0, 0
<6>[ 3.264739] [4: swapper/0: 1] [sec_input] gpio_keys_gpio_report_event: 703, 0, 0
<6>[ 3.265148] [4: swapper/0: 1] hall_init start
<6>[ 3.265304] [4: swapper/0: 1] hall_probe called
<6>[ 3.265701] [4: swapper/0: 1] init_hall_ic_irq : success
<6>[ 3.265776] [4: swapper/0: 1] input: hall as /devices/platform/soc/soc:hall/input/input10
<6>[ 3.265846] [4: swapper/0: 1] hall_probe end
<6>[ 3.266163] [4: swapper/0: 1] certify_hall_init start
<6>[ 3.266643] [4: swapper/0: 1] init_certify_hall_ic_irq : success
<6>[ 3.266721] [4: swapper/0: 1] input: certify_hall as /devices/platform/soc/soc:certify_hall/input/input11
<6>[ 3.266799] [4: swapper/0: 1] certify_hall_probe end
<6>[ 3.267182] [4: swapper/0: 1] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: setting system clock to 2018-06-28 01:22:53 UTC (1530148973)
<6>[ 3.267894] [4: swapper/0: 1] lpm_levels_of: idx 1 7100
<6>[ 3.267931] [4: swapper/0: 1] lpm_levels_of: idx 2 5989
<6>[ 3.267967] [4: swapper/0: 1] lpm_levels_of: idx 2 3933
<6>[ 3.268045] [4: swapper/0: 1] lpm_levels_of: idx 1 1744
<6>[ 3.268081] [4: swapper/0: 1] lpm_levels_of: idx 2 1000
<3>[ 3.268116] [4: swapper/0: 1] lpm_levels_of: Residency < 0 for LPM
<6>[ 3.268157] [4: swapper/0: 1] lpm_levels_of: idx 2 1000
<3>[ 3.268431] [4: swapper/0: 1] lpm_levels: register_cluster_lpm_stats()
<3>[ 3.268562] [4: swapper/0: 1] lpm_levels: register_cluster_lpm_stats()
<6>[ 3.269362] [4: swapper/0: 1] sec_debug_summary:summary_set_lpm_info_cci: summary_set_lpm_info_cci : 0x1e60c0794
<6>[ 3.270557] [4: swapper/0: 1] rmnet_ipa3 started initialization
<6>[ 3.270987] [4: swapper/0: 1] RNDIS_IPA module is loaded.
<6>[ 3.271026] [4: swapper/0: 1] [FACTORY] initialize_mobeam
<6>[ 3.271236] [4: swapper/0: 1] sec-battery soc:battery: sec_battery_probe: SEC Battery Driver Loading
<6>[ 3.271715] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(0) INPUT(1800) CHARGING(2100)
<6>[ 3.271766] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(1) INPUT(475) CHARGING(550)
<6>[ 3.271816] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(2) INPUT(500) CHARGING(500)
<6>[ 3.271864] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(3) INPUT(1800) CHARGING(2100)
<6>[ 3.271914] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(4) INPUT(475) CHARGING(550)
<6>[ 3.271962] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(5) INPUT(1500) CHARGING(1500)
<6>[ 3.272011] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(6) INPUT(1650) CHARGING(2850)
<6>[ 3.272061] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(7) INPUT(1650) CHARGING(2850)
<6>[ 3.272110] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(8) INPUT(1650) CHARGING(2850)
<6>[ 3.272159] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(9) INPUT(1650) CHARGING(2850)
<6>[ 3.272209] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(10) INPUT(820) CHARGING(1600)
<6>[ 3.272258] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(11) INPUT(750) CHARGING(1600)
<6>[ 3.272307] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(12) INPUT(820) CHARGING(1600)
<6>[ 3.272356] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(13) INPUT(700) CHARGING(1200)
<6>[ 3.272405] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(14) INPUT(750) CHARGING(1600)
<6>[ 3.272455] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(15) INPUT(820) CHARGING(1600)
<6>[ 3.272504] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(16) INPUT(750) CHARGING(1600)
<6>[ 3.272553] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(17) INPUT(1650) CHARGING(2850)
<6>[ 3.272603] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(18) INPUT(1650) CHARGING(2850)
<6>[ 3.272652] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(19) INPUT(500) CHARGING(500)
<6>[ 3.272701] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(20) INPUT(1800) CHARGING(2100)
<6>[ 3.272750] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(21) INPUT(500) CHARGING(500)
<6>[ 3.272799] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(22) INPUT(500) CHARGING(500)
<6>[ 3.272848] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(23) INPUT(500) CHARGING(500)
<6>[ 3.272897] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(24) INPUT(1000) CHARGING(450)
<6>[ 3.272946] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(25) INPUT(1000) CHARGING(1000)
<6>[ 3.272996] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(26) INPUT(2000) CHARGING(1800)
<6>[ 3.273046] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(27) INPUT(820) CHARGING(1600)
<6>[ 3.273095] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(28) INPUT(750) CHARGING(1600)
<6>[ 3.273144] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(29) INPUT(500) CHARGING(1200)
<6>[ 3.273193] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(30) INPUT(500) CHARGING(500)
<6>[ 3.273241] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(31) INPUT(1000) CHARGING(1000)
<6>[ 3.273290] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(32) INPUT(1500) CHARGING(1500)
<6>[ 3.273340] [4: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(33) INPUT(650) CHARGING(1600)
<6>[ 3.273389] [4: swapper/0: 1] sec_bat_parse_dt : TOPOFF_1ST(400), TOPOFF_2ND(200)
<6>[ 3.273539] [4: swapper/0: 1] sec_bat_parse_dt : battery_full_capacity : 4000
<6>[ 3.273592] [4: swapper/0: 1] sec_bat_parse_dt : set cisd_alg_index : 7
<6>[ 3.273789] [4: swapper/0: 1] sec_bat_parse_dt : coil_thermal_source exists
<6>[ 3.273837] [4: swapper/0: 1] sec_bat_parse_dt : slave_thermal_source is Empty
<6>[ 3.273886] [4: swapper/0: 1] sec_bat_parse_dt : slave_chg_temp_check is Empty
<6>[ 3.273936] [4: swapper/0: 1] sec_bat_parse_dt : chg_12v_high_temp is Empty
<6>[ 3.274024] [4: swapper/0: 1] sec_bat_parse_dt : wc_hero_stand_cc_cv is Empty
<6>[ 3.274073] [4: swapper/0: 1] sec_bat_parse_dt : wc_hero_stand_cv_current is Empty
<6>[ 3.274123] [4: swapper/0: 1] sec_bat_parse_dt : wc_hero_stand_hv_cv_current is Empty
<6>[ 3.274177] [4: swapper/0: 1] sec_bat_parse_dt : inbat_voltage is Empty
<6>[ 3.274262] [4: swapper/0: 1] sec_bat_parse_dt : HIGHLIMIT_THRESHOLD_NOLMAL(800), HIGHLIMIT_RECOVERY_NORMAL(750)
<6>[ 3.274262] [4: swapper/0: 1] HIGH_THRESHOLD_NORMAL(500), HIGH_RECOVERY_NORMAL(450) LOW_THRESHOLD_NORMAL(0), LOW_RECOVERY_NORMAL(50)
<6>[ 3.274262] [4: swapper/0: 1] HIGHLIMIT_THRESHOLD_LPM(800), HIGHLIMIT_RECOVERY_LPM(750)
<6>[ 3.274262] [4: swapper/0: 1] HIGH_THRESHOLD_LPM(500), HIGH_RECOVERY_LPM(450) LOW_THRESHOLD_LPM(0), LOW_RECOVERY_LPM(50)
<6>[ 3.274545] [4: swapper/0: 1] sec_bat_parse_dt: chg_float_voltage_conv is Empty
<6>[ 3.274604] [4: swapper/0: 1] sec_bat_parse_dt: swelling wireless high temp recovery is 390
<6>[ 3.274685] [4: swapper/0: 1] sec_bat_parse_dt : swelling drop voltage(set : 4150, condition : 4150)
<6>[ 3.274749] [4: swapper/0: 1] sec_bat_parse_dt : SWELLING_HIGH_TEMP(410) SWELLING_HIGH_TEMP_RECOVERY(390)
<6>[ 3.274749] [4: swapper/0: 1] SWELLING_LOW_TEMP_1st(150) SWELLING_LOW_TEMP_RECOVERY_1st(200) SWELLING_LOW_TEMP_2nd(50) SWELLING_LOW_TEMP_RECOVERY_2nd(100) SWELLING_LOW_CURRENT(950, 200), SWELLING_HIGH_CURRENT(1400, 200)
<6>[ 3.274749] [4: swapper/0: 1] SWELLING_LOW_RCHG_VOL(4000), SWELLING_HIGH_RCHG_VOL(4000)
<6>[ 3.274958] [4: swapper/0: 1] sec_bat_parse_dt: ttf_hv_12v_charge_current is Empty, Defualt value 2850
<3>[ 3.275040] [4: swapper/0: 1] sec_bat_parse_dt num_age_step : 5
<3>[ 3.275081] [4: swapper/0: 1] [0/4]cycle:0, float:4350, full_v:4250, recharge_v:4280, soc:93
<3>[ 3.275132] [4: swapper/0: 1] [1/4]cycle:300, float:4330, full_v:4230, recharge_v:4260, soc:92
<3>[ 3.275184] [4: swapper/0: 1] [2/4]cycle:400, float:4310, full_v:4210, recharge_v:4240, soc:91
<3>[ 3.275236] [4: swapper/0: 1] [3/4]cycle:700, float:4290, full_v:4190, recharge_v:4220, soc:90
<3>[ 3.275288] [4: swapper/0: 1] [4/4]cycle:1000, float:4240, full_v:4140, recharge_v:4170, soc:89
<3>[ 3.275392] [4: swapper/0: 1] sec_bat_parse_dt: nv_charge_power is Empty
<6>[ 3.275438] [4: swapper/0: 1] sec_bat_parse_dt: vendor : BATTERY, technology : 2, cable_check_type : 4
<6>[ 3.275438] [4: swapper/0: 1] cable_source_type : 1, event_waiting_time : 0
<6>[ 3.275438] [4: swapper/0: 1] polling_type : 1, initial_count : 0, check_count : 0
<6>[ 3.275438] [4: swapper/0: 1] check_adc_max : 1440, check_adc_min : 0
<6>[ 3.275438] [4: swapper/0: 1] ovp_uvlo_check_type : 3, thermal_source : 2
<6>[ 3.275438] [4: swapper/0: 1] temp_check_type : 2, temp_check_count : 1, nv_charge_power : 9000
<6>[ 3.275815] [4: swapper/0: 1] sec_bat_adc_ap_init adc-cable[0x0] - not used
<6>[ 3.275860] [4: swapper/0: 1] sec_bat_adc_ap_init adc-bat[0x0] - not used
<6>[ 3.275904] [4: swapper/0: 1] sec_bat_adc_ap_init adc-temp[0x54] - used
<6>[ 3.275947] [4: swapper/0: 1] sec_bat_adc_ap_init adc-temp[0x54] - used
<6>[ 3.275989] [4: swapper/0: 1] sec_bat_adc_ap_init adc-full[0x0] - not used
<6>[ 3.276034] [4: swapper/0: 1] sec_bat_adc_ap_init adc-volt[0x0] - not used
<6>[ 3.276078] [4: swapper/0: 1] sec_bat_adc_ap_init adc-chg-temp[0x50] - used
<6>[ 3.276122] [4: swapper/0: 1] sec_bat_adc_ap_init adc-in-bat[0x0] - not used
<6>[ 3.276166] [4: swapper/0: 1] sec_bat_adc_ap_init adc-dischg[0x0] - not used
<6>[ 3.276211] [4: swapper/0: 1] sec_bat_adc_ap_init adc-dischg-ntc[0x0] - not used
<6>[ 3.276257] [4: swapper/0: 1] sec_bat_adc_ap_init adc-wpc-temp[0x54] - used
<6>[ 3.276301] [4: swapper/0: 1] sec_bat_adc_ap_init adc-slave-chg-temp[0x0] - not used
<6>[ 3.276349] [4: swapper/0: 1] sec_bat_adc_ap_init adc-usb-temp[0x56] - used
<3>[ 3.276395] [4: swapper/0: 1] qpnp_adc_tm_channel_measure: chip not valid
<3>[ 3.276437] [4: swapper/0: 1] requesting BTM failed(=-19)
<6>[ 3.276477] [4: swapper/0: 1] sec_bat_set_current_event: current event before(0x0), after(0x40)
<6>[ 3.276531] [4: swapper/0: 1] sec_param:sales_code_is() sales_code_is: KDI
<6>[ 3.277409] [4: swapper/0: 1] sec_battery_cisd_init: cisd.err_cap_high_thr:5000, cisd.err_cap_low_thr:4500, cisd.overflow_cap_thr:4400
<3>[ 3.277522] [4: swapper/0: 1] power_supply ps: driver failed to report `status' property: -11
<3>[ 3.277605] [4: swapper/0: 1] power_supply usb: driver failed to report `online' property: -11
<3>[ 3.277681] [4: swapper/0: 1] power_supply ac: driver failed to report `online' property: -11
<3>[ 3.277842] [4: swapper/0: 1] power_supply battery: driver failed to report `status' property: -11
<3>[ 3.277959] [4: swapper/0: 1] power_supply wireless: driver failed to report `online' property: -11
<6>[ 3.278743] [4: swapper/0: 1] max77705_fg_read_vcell: VCELL(3625)mV, data(0xb544)
<7>[ 3.279420] [4: swapper/0: 1] max77705_fg_read_avg_current: avg_current=-395
<7>[ 3.279466] [4: swapper/0: 1] max77705_get_fuelgauge_soc: soc(179)
<6>[ 3.279513] [4: swapper/0: 1] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 3.279848] [4: swapper/0: 1] max77705_get_input_current_type: reg:(0x13), charging_current:(500)
<6>[ 3.280300] [4: swapper/0: 1] max77705_fg_get_scaled_capacity : current_standard(1000)
<6>[ 3.280349] [4: swapper/0: 1] max77705_fg_get_scaled_capacity : CABLE TYPE(1) INPUT CURRENT(500) CHARGING MODE(NONE)
<6>[ 3.280411] [4: swapper/0: 1] capacity_max (1000) scaled capacity(17.9), raw_soc(17.9)
<6>[ 3.280539] [4: swapper/0: 1] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x100)
<6>[ 3.280602] [4: swapper/0: 1] usb: [M] manager_notifier_register: listener=23 register
<6>[ 3.280651] [4: swapper/0: 1] ccic_notifier_init
<6>[ 3.280688] [0: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_cable_work: Start
<6>[ 3.280773] [0: kworker/u16:2: 304] sec_bat_set_current_event: current event before(0x40), after(0x44)
<3>[ 3.280859] [4: swapper/0: 1] ccic_notifier_init already registered
<6>[ 3.280901] [0: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_cable_work: End
<6>[ 3.280978] [4: swapper/0: 1] usb: [M] manager_notifier_register BATTERY: cable_type=69 (MUIC)
<6>[ 3.281034] [4: swapper/0: 1] sec-battery soc:battery: usb_typec_handle_notification: action (1) dump(0x6, 0x2, 0x01, 0x0000, 0x0000, 0x0045)
<6>[ 3.281107] [4: swapper/0: 1] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1)
<6>[ 3.281157] [4: swapper/0: 1] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4)
<6>[ 3.281218] [4: swapper/0: 1] sec-battery soc:battery: usb_typec_handle_notification: CMD[DETACH], CABLE_TYPE[1]
<6>[ 3.281280] [0: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_cable_work: Start
<6>[ 3.281360] [0: kworker/u16:2: 304] sec_bat_set_current_event: current event before(0x44), after(0x44)
<6>[ 3.281445] [4: swapper/0: 1] vbus_notifier_register: listener=1 register
<6>[ 3.281490] [0: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_cable_work: End
<6>[ 3.281566] [4: swapper/0: 1] vbus_handle_notification: action=1, vbus_status=1
<6>[ 3.283670] [5: swapper/0: 1] max77705_enable_aicl_irq enabled : 1
<6>[ 3.284054] [5: swapper/0: 1] sec-battery soc:battery: sec_battery_probe: SEC Battery Driver Monitorwork
<6>[ 3.284114] [0: kworker/u16:2: 304] sec_bat_init_chg_work: disable charging
<6>[ 3.284192] [0: kworker/u16:2: 304] sec_bat_set_charge set Charging-Off mode
<6>[ 3.284277] [5: swapper/0: 1] sec-battery soc:battery: sec_battery_probe: SEC Battery Driver Loaded
<6>[ 3.284684] [4: kworker/4:5: 478] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 3.284775] [5: swapper/0: 1] FIPS : POST (SKC v1.9)
<6>[ 3.285069] [0: kworker/u16:2: 304] mfc_chg_get_property cable_type =0
<6>[ 3.285199] [0: kworker/u16:2: 304] max77705_chg_set_property: wireless_chg(0), otg(0)
<6>[ 3.286982] [0: kworker/u16:2: 304] max77705_set_buck : CHG_CNFG_00(0x15)
<6>[ 3.288485] [0: kworker/u16:2: 304] max77705_set_charger_state : CHG_CNFG_00(0x14), CHG_CNFG_12(0x60)
<7>[ 3.289902] [3: kworker/u16:2: 304] max77705_fg_read_current: current=-562
<7>[ 3.291080] [1: kworker/u16:2: 304] max77705_fg_read_avg_current: avg_current=-395
<6>[ 3.294630] [1: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_value_by_adc:[2] Temp(363), Temp-ADC(6114)
<6>[ 3.298257] [1: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_value_by_adc:[3] Temp(363), Temp-ADC(6114)
<6>[ 3.302072] [2: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_value_by_adc:[12] Temp(373), Temp-ADC(6005)
<6>[ 3.306834] [0: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_value_by_adc:[6] Temp(405), Temp-ADC(5479)
<6>[ 3.307958] [5: swapper/0: 1] FIPS : self-tests for ecb(aes-generic) (ecb(aes)) passed
<6>[ 3.310681] [0: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_value_by_adc:[10] Temp(363), Temp-ADC(6114)
<7>[ 3.311080] [0: kworker/u16:2: 304] max77705_fg_write_temp: temperature to (363, 0x244c)
<7>[ 3.313178] [0: kworker/u16:2: 304] max77705_fg_read_avg_current: avg_current=-395
<7>[ 3.313282] [0: kworker/u16:2: 304] max77705_get_fuelgauge_soc: soc(179)
<6>[ 3.313390] [0: kworker/u16:2: 304] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 3.313871] [0: kworker/u16:2: 304] max77705_get_input_current_type: reg:(0x13), charging_current:(500)
<6>[ 3.314348] [0: kworker/u16:2: 304] max77705_fg_get_scaled_capacity : current_standard(1000)
<6>[ 3.314458] [0: kworker/u16:2: 304] max77705_fg_get_scaled_capacity : CABLE TYPE(1) INPUT CURRENT(500) CHARGING MODE(NONE)
<6>[ 3.314573] [0: kworker/u16:2: 304] capacity_max (1000) scaled capacity(17.9), raw_soc(17.9)
<6>[ 3.315602] [0: kworker/u16:2: 304] max77705_fg_set_vempty: HW V EMPTY Enable, SW V EMPTY Disable 0 mV (3100)
<7>[ 3.315721] [0: kworker/u16:2: 304] max77705_fg_get_atomic_capacity : NOW(17), OLD(17)
<6>[ 3.315842] [0: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(3625mV),Inow(-562mA),Imax(500mA),Ichg(0mA),SOC(17%),Tbat(363),Tusb(373),Tchg(405),Twpc(363)
<6>[ 3.316407] [0: kworker/u16:2: 304] sec_bat_swelling_check: swelling highblock(410), highrecov(390)
<7>[ 3.316908] [0: kworker/u16:2: 304] max77705_get_float_voltage: battery cv reg : 0x13, float voltage val : 4350
<6>[ 3.317029] [0: kworker/u16:2: 304] sec_bat_swelling_check: status(2), swell_mode(0:1:0), cv(4350)mV, temp(363)
<6>[ 3.317142] [0: kworker/u16:2: 304] sec_bat_set_current_event: current event before(0x44), after(0x44)
<6>[ 3.317249] [0: kworker/u16:2: 304] sec_bat_set_current_event: current event before(0x44), after(0x40)
<6>[ 3.318794] [1: kworker/u16:2: 304] [max77705_set_input_current] REG(0xc0) DATA(0x12), CURRENT(475)
<6>[ 3.320829] [1: kworker/u16:2: 304] [max77705_set_charge_current] REG(0xb9) DATA(0x0b), CURRENT(550)
<6>[ 3.320946] [1: kworker/u16:2: 304] sec_bat_set_charging_current: power(0), input(475), charge(550)
<6>[ 3.322198] [2: kworker/u16:2: 304] max77705_set_topoff_current: reg_data(0x05), topoff(400mA)
<6>[ 3.329096] [4: swapper/0: 1] FIPS : self-tests for cbc(aes-generic) (cbc(aes)) passed
<6>[ 3.330384] [2: kworker/u16:2: 304] max77705 : [0xb1]0x5e, [0xb2]0x9f, [0xb3]0x80, [0xb4]0x78, [0xb5]0x00, [0xb6]0xff, [0xb7]0x14, [0xb8]0x38, [0xb9]0x4b, [0xba]0x9d, [0xbb]0x13, [0xbc]0x3c, [0xbd]0x6d, [0xbe]0x34, [0xbf]0x02, [0xc0]0x92, [0xc1]0x10, [0xc2]0x00, [0xc3]0x60,
<6>[ 3.331348] [2: kworker/u16:2: 304] max77705_chg_monitor_work: [CHG] MODE(0x4), B2SOVRC(0xc), otg_on(0)
<6>[ 3.331492] [2: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(NONE, NONE, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(NONE, 0), sleep_mode(0), Cycle(-1)
<6>[ 3.331819] [2: kworker/2:0: 27] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 3.333454] [2: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_set_polling: Polling time 30/30 sec.
<6>[ 3.371598] [0: swapper/0: 1] FIPS : self-tests for gcm(aes-generic) (gcm(aes)) passed
<6>[ 3.380183] [1: kworker/u16:2: 304] max77705_aicl_isr_work : skip
<6>[ 3.391543] [2: swapper/0: 1] FIPS : self-tests for ecb(aes-ce) (ecb(aes)) passed
<6>[ 3.401002] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] get_tsp_nvm_data: offset:36 data:01
<6>[ 3.402728] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0
<6>[ 3.402876] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: Normal changed
<6>[ 3.411974] [2: swapper/0: 1] FIPS : self-tests for cbc(aes-ce) (cbc(aes)) passed
<6>[ 3.453287] [3: swapper/0: 1] FIPS : self-tests for gcm(aes-ce) (gcm(aes)) passed
<6>[ 3.453855] [3: swapper/0: 1] FIPS : self-tests for sha1-generic (sha1) passed
<6>[ 3.473541] [2: swapper/0: 1] FIPS : self-tests for hmac(sha1-generic) (hmac(sha1)) passed
<6>[ 3.473914] [2: swapper/0: 1] FIPS : self-tests for sha1-ce (sha1) passed
<6>[ 3.493580] [1: swapper/0: 1] FIPS : self-tests for hmac(sha1-ce) (hmac(sha1)) passed
<6>[ 3.494328] [1: swapper/0: 1] FIPS : self-tests for sha224-generic (sha224) passed
<6>[ 3.495037] [1: swapper/0: 1] FIPS : self-tests for sha256-generic (sha256) passed
<6>[ 3.515099] [1: swapper/0: 1] FIPS : self-tests for hmac(sha224-generic) (hmac(sha224)) passed
<6>[ 3.535446] [1: swapper/0: 1] FIPS : self-tests for hmac(sha256-generic) (hmac(sha256)) passed
<6>[ 3.535773] [1: swapper/0: 1] FIPS : self-tests for sha224-ce (sha224) passed
<6>[ 3.536068] [1: swapper/0: 1] FIPS : self-tests for sha256-ce (sha256) passed
<6>[ 3.555268] [1: swapper/0: 1] FIPS : self-tests for hmac(sha224-ce) (hmac(sha224)) passed
<6>[ 3.574963] [1: swapper/0: 1] FIPS : self-tests for hmac(sha256-ce) (hmac(sha256)) passed
<6>[ 3.575731] [1: swapper/0: 1] FIPS : self-tests for sha384-generic (sha384) passed
<6>[ 3.576472] [1: swapper/0: 1] FIPS : self-tests for sha512-generic (sha512) passed
<6>[ 3.596273] [1: swapper/0: 1] FIPS : self-tests for hmac(sha384-generic) (hmac(sha384)) passed
<6>[ 3.616298] [1: swapper/0: 1] FIPS : self-tests for hmac(sha512-generic) (hmac(sha512)) passed
<6>[ 3.617182] [1: swapper/0: 1] FIPS : self-tests for drbg_nopr_hmac_sha256 (stdrng) passed
<6>[ 3.618088] [1: swapper/0: 1] FIPS : self-tests for drbg_pr_hmac_sha256 (stdrng) passed
<6>[ 3.618192] [1: swapper/0: 1] FIPS : POST - Algorithm Tests Passed
<6>[ 3.620514] [1: swapper/0: 1] FIPS : POST - Integrity Check Passed
<6>[ 3.620607] [1: swapper/0: 1] FIPS : POST - CRYPTO API started in FIPS approved mode
<7>[ 3.620745] [1: swapper/0: 1] initcall tcrypt_mod_init+0x0/0x148 returned 0 after 328067 usecs
<3>[ 3.623704] [0: swapper/0: 1] msm_bus_late_init: Remove handoff bw requests
<6>[ 3.626361] [0: swapper/0: 1] ufs_card_gdsc: disabling
<6>[ 3.640168] [4: kworker/4:0: 43] [SX9320]: sx9320_set_mode - change the mode : 1
<6>[ 3.645765] [0: swapper/0: 1] s2mpb02-buck2: disabling
<6>[ 3.647338] [0: swapper/0: 1] s2dos05-elvss: disabling
<3>[ 3.655719] [0: swapper/0: 1] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_dpdm_regulator_is_enabled qphy->dpdm_enable = 0
<6>[ 3.655829] [0: swapper/0: 1] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
<6>[ 3.656559] [0: swapper/0: 1] ALSA device list:
<6>[ 3.656629] [0: swapper/0: 1] No soundcards found.
<3>[ 3.656751] [0: swapper/0: 1] Warning: unable to open an initial console.
<3>[ 3.657651] [1: kworker/1:1: 74] Running do_deferred_initcalls()
<6>[ 3.657732] [1: kworker/1:1: 74] dhd_wlan_init: START.......
<6>[ 3.660360] [1: kworker/1:1: 74] dhd_wifi_init_gpio: gpio_wlan_power : 99
<3>[ 3.660464] [1: kworker/1:1: 74] dhd_wifi_init_gpio: gpio_request WL_REG_ON done - WLAN_EN: GPIO 99
<3>[ 3.660554] [1: kworker/1:1: 74] dhd_wifi_init_gpio: WL_REG_ON is pulled up
<6>[ 3.660630] [1: kworker/1:1: 74] dhd_wifi_init_gpio: Initial WL_REG_ON: [1]
<14>[ 3.664808] [1: init: 1] init: init first stage started!
<14>[ 3.664933] [1: init: 1] init: First stage mount skipped (recovery mode)
<14>[ 3.665814] [1: init: 1] init: Using Android DT directory /proc/device-tree/firmware/android/
<14>[ 3.666106] [1: init: 1] init: Skipped setting INIT_AVB_VERSION (not vbmeta compatible)
<14>[ 3.666221] [1: init: 1] init: Loading SELinux policy
<7>[ 3.676183] [1: init: 1] SELinux: 4096 avtab hash slots, 11604 rules.
<7>[ 3.686918] [1: init: 1] SELinux: 4096 avtab hash slots, 11604 rules.
<7>[ 3.686994] [1: init: 1] SELinux: 1 users, 2 roles, 1109 types, 0 bools, 1 sens, 1024 cats
<7>[ 3.687079] [1: init: 1] SELinux: 92 classes, 11604 rules
<6>[ 3.689919] [1: init: 1] SELinux: Class cap_lod not defined in policy.
<6>[ 3.689988] [1: init: 1] SELinux: Class cap2_lod not defined in policy.
<6>[ 3.690122] [1: init: 1] SELinux: Class bpf not defined in policy.
<6>[ 3.690185] [1: init: 1] SELinux: the above unknown classes and permissions will be denied
<7>[ 3.690280] [1: init: 1] SELinux: Completing initialization.
<7>[ 3.690339] [1: init: 1] SELinux: Setting up existing superblocks.
<3>[ 3.694613] [1: init: 1] SELinux: __security_genfs_sid: genfs || cmp
<3>[ 3.694685] [1: init: 1] SELinux: __security_genfs_sid: genfs || cmp
<6>[ 3.710103] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_read_info_work: fac_nv:00
<6>[ 3.710195] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_run_rawdata_all: start (noise:0, wet:0)##
<6>[ 3.710284] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_fix_tmode
<6>[ 3.770059] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_read_frame: type 3
<3>[ 3.782779] [4: init: 1] SELinux: __security_genfs_sid: genfs || cmp
<3>[ 3.782831] [4: init: 1] SELinux: __security_genfs_sid: genfs || cmp
<3>[ 3.782880] [4: init: 1] SELinux: __security_genfs_sid: genfs || cmp
<3>[ 3.782971] [4: init: 1] SELinux: __security_genfs_sid: genfs || cmp
<14>[ 3.786721] [4: init: 1] selinux: SELinux: Loaded policy from /sepolicy
<14>[ 3.786721] [4: init: 1]
<14>[ 3.788344] [4: init: 1] selinux: SELinux: Loaded file_contexts
<14>[ 3.788344] [4: init: 1]
<14>[ 3.790079] [5: init: 1] init: init second stage started!
<14>[ 3.792311] [5: init: 1] init: Using Android DT directory /proc/device-tree/firmware/android/
<14>[ 3.793767] [5: init: 1] selinux: SELinux: Loaded file_contexts
<14>[ 3.793767] [5: init: 1]
<14>[ 3.794115] [5: init: 1] selinux: SELinux: Loaded property_contexts from /plat_property_contexts & /nonplat_property_contexts.
<14>[ 3.794115] [5: init: 1]
<14>[ 3.794218] [5: init: 1] init: Running restorecon...
<11>[ 3.795741] [5: init: 1] selinux: SELinux: Could not stat /dev/block: No such file or directory.
<11>[ 3.795741] [5: init: 1]
<14>[ 3.795976] [5: init: 1] init: Untracked pid 483 killed by signal 11
<14>[ 3.796048] [5: init: 1] init: Untracked pid 486 killed by signal 11
<14>[ 3.796110] [5: init: 1] init: Untracked pid 491 killed by signal 11
<14>[ 3.796170] [5: init: 1] init: Untracked pid 494 killed by signal 11
<14>[ 3.796231] [5: init: 1] init: Untracked pid 499 killed by signal 11
<14>[ 3.796291] [5: init: 1] init: Untracked pid 502 killed by signal 11
<14>[ 3.796352] [5: init: 1] init: Untracked pid 506 killed by signal 11
<14>[ 3.796413] [5: init: 1] init: Untracked pid 509 killed by signal 11
<14>[ 3.796473] [5: init: 1] init: Untracked pid 515 killed by signal 11
<14>[ 3.796532] [5: init: 1] init: Untracked pid 518 killed by signal 11
<14>[ 3.796591] [5: init: 1] init: Untracked pid 523 killed by signal 11
<14>[ 3.796649] [5: init: 1] init: Untracked pid 526 killed by signal 11
<14>[ 3.796708] [5: init: 1] init: Untracked pid 531 killed by signal 11
<14>[ 3.796767] [5: init: 1] init: Untracked pid 534 killed by signal 11
<14>[ 3.796827] [5: init: 1] init: Untracked pid 538 killed by signal 11
<14>[ 3.796886] [5: init: 1] init: Untracked pid 541 killed by signal 11
<14>[ 3.796945] [5: init: 1] init: Untracked pid 547 killed by signal 11
<14>[ 3.797003] [5: init: 1] init: Untracked pid 550 killed by signal 11
<14>[ 3.797061] [5: init: 1] init: Untracked pid 555 killed by signal 11
<14>[ 3.797119] [5: init: 1] init: Untracked pid 558 killed by signal 11
<14>[ 3.797179] [5: init: 1] init: Untracked pid 563 killed by signal 11
<14>[ 3.797237] [5: init: 1] init: Untracked pid 566 killed by signal 11
<14>[ 3.797296] [5: init: 1] init: Untracked pid 571 killed by signal 11
<14>[ 3.797354] [5: init: 1] init: Untracked pid 574 killed by signal 11
<14>[ 3.797413] [5: init: 1] init: Untracked pid 579 killed by signal 11
<14>[ 3.797471] [5: init: 1] init: Untracked pid 582 killed by signal 11
<14>[ 3.797530] [5: init: 1] init: Untracked pid 587 killed by signal 11
<14>[ 3.797589] [5: init: 1] init: Untracked pid 590 killed by signal 11
<14>[ 3.797648] [5: init: 1] init: Untracked pid 595 killed by signal 11
<14>[ 3.797707] [5: init: 1] init: Untracked pid 598 killed by signal 11
<14>[ 3.797766] [5: init: 1] init: Untracked pid 603 killed by signal 11
<14>[ 3.797824] [5: init: 1] init: Untracked pid 606 killed by signal 11
<11>[ 3.797883] [5: init: 1] init: waitid failed: No child processes
<12>[ 3.797949] [5: init: 1] init: Couldn't load property file: Unable to open '/system/etc/prop.default': No such file or directory: No such file or directory
<12>[ 3.798418] [5: init: 1] init: Couldn't load property file: Unable to open '/odm/default.prop': No such file or directory: No such file or directory
<12>[ 3.798515] [5: init: 1] init: Couldn't load property file: Unable to open '/vendor/default.prop': No such file or directory: No such file or directory
<14>[ 3.798867] [5: init: 1] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
<14>[ 3.799012] [5: init: 1] init: Parsing file /init.rc...
<14>[ 3.799095] [5: init: 1] init: Added '/init.recovery.logd.rc' to import list
<14>[ 3.799153] [5: init: 1] init: Added '/init.recovery.ldconfig.rc' to import list
<14>[ 3.799209] [5: init: 1] init: Added '/init.recovery.mksh.rc' to import list
<14>[ 3.799263] [5: init: 1] init: Added '/init.recovery.nano.rc' to import list
<14>[ 3.799317] [5: init: 1] init: Added '/init.recovery.usb.rc' to import list
<14>[ 3.799371] [5: init: 1] init: Added '/init.recovery.service.rc' to import list
<14>[ 3.799426] [5: init: 1] init: Added '/init.recovery.vold_decrypt.rc' to import list
<14>[ 3.799488] [5: init: 1] init: Added '/init.recovery.qcom.rc' to import list
<11>[ 3.799609] [5: init: 1] init: /init.rc: 16: invalid keyword 'setcon'
<11>[ 3.799742] [5: init: 1] init: /init.rc: 66: invalid keyword 'load_all_props'
<11>[ 3.799836] [5: init: 1] init: /init.rc: 104: invalid keyword 'powerctl'
<14>[ 3.799943] [5: init: 1] init: Parsing file /init.recovery.logd.rc...
<11>[ 3.800005] [5: init: 1] init: Unable to open '/init.recovery.logd.rc': No such file or directory
<11>[ 3.800226] [5: init: 1] init: /init.rc: 1: Could not import file '/init.recovery.logd.rc': No such file or directory
<14>[ 3.800304] [5: init: 1] init: Parsing file /init.recovery.ldconfig.rc...
<14>[ 3.800376] [5: init: 1] init: Parsing file /init.recovery.mksh.rc...
<11>[ 3.800434] [5: init: 1] init: Unable to open '/init.recovery.mksh.rc': No such file or directory
<11>[ 3.800496] [5: init: 1] init: /init.rc: 3: Could not import file '/init.recovery.mksh.rc': No such file or directory
<14>[ 3.800569] [5: init: 1] init: Parsing file /init.recovery.nano.rc...
<14>[ 3.800635] [5: init: 1] init: Parsing file /init.recovery.usb.rc...
<14>[ 3.800842] [5: init: 1] init: Parsing file /init.recovery.service.rc...
<14>[ 3.800916] [5: init: 1] init: Parsing file /init.recovery.vold_decrypt.rc...
<11>[ 3.800973] [5: init: 1] init: Unable to open '/init.recovery.vold_decrypt.rc': No such file or directory
<11>[ 3.801038] [5: init: 1] init: /init.rc: 7: Could not import file '/init.recovery.vold_decrypt.rc': No such file or directory
<14>[ 3.801113] [5: init: 1] init: Parsing file /init.recovery.qcom.rc...
<14>[ 3.801222] [5: init: 1] init: Parsing file /system/etc/init...
<11>[ 3.801275] [5: init: 1] init: Unable to open '/system/etc/init': No such file or directory
<14>[ 3.801337] [5: init: 1] init: Parsing file /vendor/etc/init...
<11>[ 3.801387] [5: init: 1] init: Unable to open '/vendor/etc/init': No such file or directory
<14>[ 3.801448] [5: init: 1] init: Parsing file /odm/etc/init...
<11>[ 3.801497] [5: init: 1] init: Unable to open '/odm/etc/init': No such file or directory
<14>[ 3.801583] [5: init: 1] init: processing action (early-init) from (/init.rc:10)
<14>[ 3.802221] [5: init: 1] init: starting service 'ueventd'...
<14>[ 3.802718] [5: init: 1] init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
<14>[ 3.810290] [0: ueventd: 611] ueventd: ueventd started!
<14>[ 3.810578] [0: ueventd: 611] ueventd: Parsing file /ueventd.rc...
<14>[ 3.813364] [0: ueventd: 611] ueventd: Parsing file /vendor/ueventd.rc...
<11>[ 3.813562] [0: ueventd: 611] ueventd: Unable to open '/vendor/ueventd.rc': No such file or directory
<14>[ 3.813743] [0: ueventd: 611] ueventd: Parsing file /odm/ueventd.rc...
<11>[ 3.813924] [0: ueventd: 611] ueventd: Unable to open '/odm/ueventd.rc': No such file or directory
<14>[ 3.814263] [0: ueventd: 611] ueventd: Parsing file /ueventd.qcom.rc...
<11>[ 3.815285] [0: ueventd: 611] ueventd: /ueventd.qcom.rc: 40: invalid gid 'bridge_rw'
<14>[ 3.825013] [0: ueventd: 611] selinux: SELinux: Loaded file_contexts
<14>[ 3.825013] [0: ueventd: 611]
<6>[ 3.840196] [0: kworker/0:2: 315] wacom_w90xx 31-0056: [sec_input] read status, retry 10
<6>[ 3.841681] [0: kworker/0:2: 315] wacom_w90xx 31-0056: [sec_input] Pass
<6>[ 3.841734] [0: kworker/0:2: 315] wacom_w90xx 31-0056: [sec_input] wacom_open_test: Pass buf[0]:1, buf[1]:0, buf[2]:72, buf[3]:123, buf[4]:0, buf[5]:50, buf[6]:147
<6>[ 3.842305] [0: kworker/0:2: 315] wacom_w90xx 31-0056: [sec_input] wacom_ble_charge_mode: now EA, prev 00
<6>[ 3.856402] [0: ueventd: 611] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 3.869612] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_print_frame
<6>[ 3.869784] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] TX 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
<6>[ 3.869952] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] +--------------------------------------------------------------------
<6>[ 3.870186] [1: kworker/1:1: 74] dhd_wifi_init_gpio: gpio_wlan_host_wake : 116
<3>[ 3.870306] [1: kworker/1:1: 74] dhd_wifi_init_gpio: gpio_request WLAN_HOST_WAKE done - WLAN_HOST_WAKE: GPIO 116
<6>[ 3.870412] [1: kworker/1:1: 74] dhd_wifi_init_gpio: Call msm_pcie_enumerate
<6>[ 3.870527] [1: kworker/1:1: 74] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
<6>[ 3.870610] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx00 | -48 -36 -40 -28 -28 -28 -24 -24 -33 -31 -31 -31 -34 -42 -42 -38 -55
<6>[ 3.870783] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx01 | -48 -28 -30 -26 -28 -28 -24 -28 -36 -38 -40 -38 -40 -42 -40 -38 -55
<6>[ 3.870974] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx02 | -37 -17 -21 -19 -20 -20 -26 -22 -36 -36 -34 -34 -34 -36 -34 -32 -41
<6>[ 3.871164] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx03 | -49 -35 -39 -35 -41 -43 -41 -45 -54 -54 -54 -50 -52 -54 -52 -46 -55
<6>[ 3.871354] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx04 | -50 -38 -44 -44 -44 -46 -48 -50 -59 -59 -61 -59 -56 -56 -54 -54 -62
<6>[ 3.871544] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx05 | -45 -33 -35 -37 -42 -42 -44 -44 -55 -53 -57 -53 -54 -50 -46 -46 -52
<6>[ 3.871733] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx06 | -46 -34 -38 -38 -41 -39 -45 -41 -53 -53 -55 -49 -53 -51 -49 -49 -54
<6>[ 3.871923] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx07 | -34 -46 -50 -50 -51 -57 -53 -53 -66 -68 -68 -66 -63 -63 -63 -61 -68
<6>[ 3.872112] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx08 | -15 -49 -53 -53 -52 -54 -52 -54 -63 -65 -67 -63 -63 -61 -61 -65 -71
<6>[ 3.872712] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx09 | -15 -41 -41 -45 -47 -43 -47 -45 -55 -57 -59 -55 -56 -56 -54 -58 -60
<6>[ 3.872907] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx10 | -33 -43 -43 -47 -48 -46 -48 -46 -54 -54 -56 -56 -57 -57 -53 -59 -61
<6>[ 3.873099] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx11 | -48 -44 -46 -50 -47 -45 -55 -47 -58 -56 -60 -54 -59 -57 -57 -57 -62
<6>[ 3.873288] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx12 | -28 -46 -46 -52 -49 -47 -51 -47 -58 -58 -60 -56 -62 -58 -56 -60 -58
<6>[ 3.873513] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx13 | -16 -54 -54 -60 -61 -57 -61 -59 -66 -70 -70 -66 -69 -67 -65 -69 -68
<6>[ 3.873703] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx14 | -20 -54 -58 -60 -59 -57 -59 -59 -67 -69 -71 -67 -69 -67 -67 -67 -56
<6>[ 3.873893] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx15 | -27 -47 -47 -49 -51 -49 -55 -51 -57 -57 -59 -57 -58 -58 -56 -60 -30
<6>[ 3.874082] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx16 | -46 -50 -48 -52 -55 -51 -53 -51 -61 -63 -63 -59 -60 -60 -58 -62 -40
<6>[ 3.874272] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx17 | -65 -65 -61 -63 -64 -62 -66 -64 -69 -73 -73 -71 -71 -73 -71 -75 -64
<6>[ 3.874463] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx18 | -65 -65 -63 -65 -72 -66 -66 -64 -74 -74 -78 -74 -73 -73 -73 -79 -85
<6>[ 3.874652] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx19 | -57 -57 -57 -59 -58 -56 -60 -54 -61 -69 -69 -67 -69 -69 -69 -71 -86
<6>[ 3.874842] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx20 | -60 -56 -54 -58 -61 -57 -59 -57 -68 -68 -72 -68 -71 -73 -75 -79 -101
<6>[ 3.875034] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx21 | -67 -71 -65 -71 -71 -69 -71 -71 -77 -81 -81 -79 -81 -85 -85 -95 -113
<6>[ 3.875224] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx22 | -69 -69 -65 -71 -72 -70 -74 -72 -78 -82 -84 -80 -85 -87 -87 -99 -117
<6>[ 3.875413] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx23 | -59 -59 -53 -59 -64 -60 -68 -60 -74 -72 -76 -74 -78 -76 -84 -90 -106
<6>[ 3.875603] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx24 | -59 -59 -57 -63 -65 -63 -67 -67 -71 -75 -79 -73 -78 -82 -88 -92 -110
<6>[ 3.875795] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx25 | -74 -72 -68 -74 -76 -74 -78 -76 -86 -88 -90 -88 -90 -90 -94 -102 -121
<6>[ 3.875987] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx26 | -74 -70 -70 -74 -78 -76 -82 -80 -86 -88 -92 -90 -91 -93 -97 -101 -116
<6>[ 3.876178] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx27 | -65 -61 -57 -67 -70 -70 -74 -70 -80 -82 -82 -80 -84 -88 -84 -88 -99
<6>[ 3.876367] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx28 | -64 -62 -58 -64 -70 -68 -74 -76 -82 -84 -86 -84 -82 -84 -82 -88 -101
<6>[ 3.876558] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx29 | -65 -63 -61 -65 -71 -71 -75 -69 -83 -83 -85 -83 -80 -82 -80 -86 -93
<6>[ 3.876702] [1: kworker/1:1: 74] msm_pcie_enable: PCIe RC0 PHY is ready!
<6>[ 3.876777] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx30 | -65 -59 -57 -65 -70 -64 -74 -68 -79 -83 -83 -77 -78 -74 -72 -80 -84
<6>[ 3.876936] [1: kworker/1:1: 74] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
<6>[ 3.877019] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx31 | -65 -55 -53 -61 -63 -61 -69 -65 -72 -74 -76 -70 -71 -69 -67 -75 -76
<6>[ 3.877189] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx32 | -65 -53 -49 -51 -56 -56 -60 -56 -66 -68 -70 -64 -65 -63 -59 -63 -75
<6>[ 3.877379] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx33 | -67 -57 -49 -53 -54 -48 -58 -56 -61 -65 -67 -65 -62 -62 -56 -64 -74
<6>[ 3.877568] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx34 | -68 -58 -54 -56 -57 -53 -59 -53 -60 -64 -66 -58 -61 -59 -59 -63 -67
<6>[ 3.878191] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_run_rawdata_all: mutual 3 : Max/Min -15,-121 ##
<6>[ 3.883450] [1: kworker/1:1: 74] msm_pcie_enable: PCIe RC0: LTSSM_STATE:0x0
<6>[ 3.888733] [1: kworker/1:1: 74] msm_pcie_enable: PCIe RC0: LTSSM_STATE:0x0
<6>[ 3.894075] [1: kworker/1:1: 74] msm_pcie_enable: PCIe RC0: LTSSM_STATE:0x11
<6>[ 3.894232] [1: kworker/1:1: 74] msm_pcie_enable: PCIe RC0 link initialized
<6>[ 3.894449] [1: kworker/1:1: 74] OF: PCI: host bridge /soc/qcom,pcie@0x1c00000 ranges:
<6>[ 3.894566] [1: kworker/1:1: 74] OF: PCI: No bus range found for /soc/qcom,pcie@0x1c00000, using [bus 00-ff]
<6>[ 3.894715] [1: kworker/1:1: 74] OF: PCI: IO 0x60200000..0x602fffff -> 0x60200000
<6>[ 3.894832] [1: kworker/1:1: 74] OF: PCI: MEM 0x60300000..0x60ffffff -> 0x60300000
<6>[ 3.895360] [1: kworker/1:1: 74] pci-msm 1c00000.qcom,pcie: PCI host bridge to bus 0000:00
<6>[ 3.895478] [1: kworker/1:1: 74] pci_bus 0000:00: root bus resource [bus 00-ff]
<6>[ 3.895587] [1: kworker/1:1: 74] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x60200000-0x602fffff])
<6>[ 3.895716] [1: kworker/1:1: 74] pci_bus 0000:00: root bus resource [mem 0x60300000-0x60ffffff]
<7>[ 3.896019] [1: kworker/1:1: 74] pci 0000:00:00.0: [17cb:0106] type 01 class 0x060400
<7>[ 3.896351] [1: kworker/1:1: 74] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
<7>[ 3.897218] [1: kworker/1:1: 74] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
<6>[ 3.898021] [1: kworker/1:1: 74] iommu: Adding device 0000:00:00.0 to group 47
<6>[ 3.898516] [1: kworker/1:1: 74] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
<7>[ 3.899480] [1: kworker/1:1: 74] pci 0000:01:00.0: [14e4:441f] type 00 class 0x028000
<7>[ 3.899848] [1: kworker/1:1: 74] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
<7>[ 3.900202] [1: kworker/1:1: 74] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
<6>[ 3.900392] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] minority_report_calculate_rawdata min:-121,max:-15,node gap:38 =>F
<6>[ 3.900549] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_read_frame: type 5
<7>[ 3.901680] [1: kworker/1:1: 74] pci 0000:01:00.0: supports D1 D2
<7>[ 3.901778] [1: kworker/1:1: 74] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 3.902689] [1: kworker/1:1: 74] iommu: Adding device 0000:01:00.0 to group 47
<7>[ 3.902891] [1: kworker/1:1: 74] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
<6>[ 3.903232] [1: kworker/1:1: 74] pci 0000:00:00.0: BAR 8: assigned [mem 0x60400000-0x609fffff]
<6>[ 3.903358] [1: kworker/1:1: 74] pci 0000:00:00.0: BAR 0: assigned [mem 0x60300000-0x60300fff 64bit]
<6>[ 3.903597] [1: kworker/1:1: 74] pci 0000:01:00.0: BAR 2: assigned [mem 0x60400000-0x607fffff 64bit]
<6>[ 3.903853] [1: kworker/1:1: 74] pci 0000:01:00.0: BAR 0: assigned [mem 0x60800000-0x60807fff 64bit]
<6>[ 3.904099] [1: kworker/1:1: 74] pci 0000:00:00.0: PCI bridge to [bus 01]
<6>[ 3.904250] [1: kworker/1:1: 74] pci 0000:00:00.0: bridge window [mem 0x60400000-0x609fffff]
<3>[ 3.906991] [1: kworker/1:1: 74] dhd_init_wlan_mem: WIFI MEM Allocated
<6>[ 3.907086] [1: kworker/1:1: 74] dhd_wlan_init: FINISH.......
<7>[ 3.907205] [1: kworker/1:1: 74] initcall dhd_wlan_init+0x0/0xb4 returned 0 after 243591 usecs
<4>[ 3.907309] [1: kworker/1:1: 74] dhd_module_init in
<4>[ 3.909162] [1: kworker/1:1: 74] PCI_PROBE: bus 1, slot 0,vendor 14E4, device 441F(good PCI location)
<4>[ 3.909279] [1: kworker/1:1: 74] dhdpcie_init: found adapter info 'DHD generic adapter'
<4>[ 3.909427] [1: kworker/1:1: 74] succeed to alloc static buf
<4>[ 3.909515] [1: kworker/1:1: 74] dhdpcie_smmu_init: SMMU initialize
<4>[ 3.914590] [1: kworker/1:1: 74] dhdpcie_smmu_init : get SMMU start address 0xa0000000, size 0x10000000
<4>[ 3.914712] [1: kworker/1:1: 74] dhdpcie_smmu_init : SMMU init start
<6>[ 3.916146] [1: kworker/1:1: 74] pcieh 0000:01:00.0: enabling device (0000 -> 0002)
<14>[ 3.928864] [4: ueventd: 611] selinux: SELinux: Loaded file_contexts
<14>[ 3.928864] [4: ueventd: 611]
<4>[ 3.935243] [1: kworker/1:1: 74] DHD: dongle ram size is set to 1376256(orig 1376256) at 0x170000
<4>[ 3.935785] [1: kworker/1:1: 74] dhd_pktid_map_init:1744: pktid_audit init succeeded 1025
<4>[ 3.935947] [1: kworker/1:1: 74] dhd_pktid_map_init:1744: pktid_audit init succeeded 1025
<4>[ 3.936167] [1: kworker/1:1: 74] dhd_pktid_map_init:1744: pktid_audit init succeeded 6145
<6>[ 3.936540] [1: kworker/1:1: 74] CFG80211-INFO) wl_setup_wiphy :
<4>[ 3.936618] [1: kworker/1:1: 74] Registering Vendor80211
<6>[ 3.936699] [1: kworker/1:1: 74] CFG80211-INFO) wl_cfgvendor_attach :
<4>[ 3.936768] [1: kworker/1:1: 74] Vendor: Register BRCM cfg80211 vendor cmd(0x67) interface
<6>[ 3.939382] [1: kworker/1:1: 74] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call :
<4>[ 3.939470] [1: kworker/1:1: 74] wdev null. Do nothing
<6>[ 3.939548] [1: kworker/1:1: 74] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call :
<4>[ 3.939624] [1: kworker/1:1: 74] wdev null. Do nothing
<6>[ 3.939692] [1: kworker/1:1: 74] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call :
<4>[ 3.939767] [1: kworker/1:1: 74] wdev null. Do nothing
<6>[ 3.939834] [1: kworker/1:1: 74] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call :
<4>[ 3.939908] [1: kworker/1:1: 74] wdev null. Do nothing
<6>[ 3.939975] [1: kworker/1:1: 74] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call :
<4>[ 3.940050] [1: kworker/1:1: 74] wdev null. Do nothing
<6>[ 3.940170] [1: kworker/1:1: 74] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call :
<4>[ 3.940244] [1: kworker/1:1: 74] wdev null. Do nothing
<6>[ 3.940310] [1: kworker/1:1: 74] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call :
<4>[ 3.940380] [1: kworker/1:1: 74] wdev null. Do nothing
<6>[ 3.940490] [1: kworker/1:1: 74] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call :
<4>[ 3.940560] [1: kworker/1:1: 74] wdev null. Do nothing
<6>[ 3.941410] [1: kworker/1:1: 74] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call :
<4>[ 3.941487] [1: kworker/1:1: 74] wdev null. Do nothing
<4>[ 3.941599] [1: kworker/1:1: 74] p2p0: P2P Interface Registered
<6>[ 3.941672] [1: kworker/1:1: 74] CFG80211-INFO2) wl_attach_ap_stainfo :
<4>[ 3.941740] [1: kworker/1:1: 74] attach success
<4>[ 3.941842] [1: kworker/1:1: 74] dhd_log_dump_init: kernel log buf size = 512KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 76KB
<4>[ 3.941956] [1: kworker/1:1: 74] dhd_log_dump_init : Try to allocate memory total(4194304) special(8192)
<4>[ 3.942948] [1: kworker/1:1: 74] EWPF-STARTED
<4>[ 3.943025] [1: kworker/1:1: 74] dhd_pktlog_ring_init(): pktlog ring init success
<4>[ 3.943112] [1: kworker/1:1: 74] dhd_pktlog_ring_init(): pktlog ring init success
<4>[ 3.943193] [1: kworker/1:1: 74] dhd_pktlog_filter_init(): pktlog filter init success
<4>[ 3.943274] [1: kworker/1:1: 74] dhd_os_attach_pktlog(): dhd_os_attach_pktlog attach
<4>[ 3.960577] [1: kworker/1:1: 74] dhd_attach(): thread:dhd_watchdog_thread:26e started
<4>[ 3.960717] [1: kworker/1:1: 74] dhd_attach(): thread:dhd_rpm_state_thread:26f started
<4>[ 3.960786] [1: kworker/1:1: 74] dhd_deferred_work_init: work queue initialized
<4>[ 3.960837] [1: kworker/1:1: 74] dhd_cpumasks_init CPU masks primary(big)=0xf0 secondary(little)=0xe
<4>[ 3.961039] [1: kworker/1:1: 74] dhd_get_memdump_info: MEMDUMP ENABLED = 0
<4>[ 3.961382] [1: kworker/1:1: 74] Dongle Host Driver, version 100.13.36.1 (r)
<4>[ 3.961382] [1: kworker/1:1: 74] Compiled in drivers/net/wireless/broadcom/bcmdhd_100_10 on Feb 16 2020 at 21:10:50
<6>[ 3.961702] [1: kworker/1:1: 74] CFG80211-INFO) wl_cfg80211_get_tx_power :
<4>[ 3.961748] [1: kworker/1:1: 74] device is not ready
<4>[ 3.961921] [1: kworker/1:1: 74] Register interface [wlan0] MAC: 00:xx:xx:xx:x9:66
<4>[ 3.961921] [1: kworker/1:1: 74]
<4>[ 3.962082] [1: kworker/1:1: 74] dhd_bus_devreset: == Power OFF ==
<4>[ 3.962143] [1: kworker/1:1: 74] dhdpcie_oob_intr_unregister: irq is not registered
<4>[ 3.962196] [1: kworker/1:1: 74] dhd_dpc_kill: tasklet disabled
<4>[ 3.962241] [1: kworker/1:1: 74] ******** Perform BP reset ********
<4>[ 3.964177] [1: kworker/1:1: 74] ******** BP reset Succedeed ********
<6>[ 3.965672] [1: kworker/1:1: 74] msm_pcie_pm_suspend: PCIe RC0: PARF LTSSM_STATE:0x11
<6>[ 3.965957] [1: kworker/1:1: 74] msm_pcie_pm_suspend: RC0: PME_TURNOFF_MSG is sent out
<6>[ 3.966013] [1: kworker/1:1: 74] msm_pcie_pm_suspend: PCIe RC0: PARF LTSSM_STATE:0x15
<6>[ 3.966070] [1: kworker/1:1: 74] msm_pcie_pm_suspend: RC0: PCIE20_PARF_PM_STTS is 0xd0000420.
<6>[ 3.966163] [1: kworker/1:1: 74] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
<4>[ 3.966747] [1: kworker/1:1: 74] dhd_bus_devreset: WLAN OFF Done
<4>[ 3.966793] [1: kworker/1:1: 74] wifi_platform_set_power = 0
<6>[ 3.966836] [1: kworker/1:1: 74] ------------------------------------------------
<6>[ 3.966883] [1: kworker/1:1: 74] ------------------------------------------------
<6>[ 3.966932] [1: kworker/1:1: 74] dhd_wlan_power Enter: power off
<14>[ 3.982035] [4: ueventd: 611] ueventd: Coldboot took 0.156 seconds
<14>[ 3.985797] [1: init: 1] init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) returned 0 took 182ms.
<14>[ 3.985911] [1: init: 1] init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
<14>[ 3.987382] [1: init: 1] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
<14>[ 3.987471] [1: init: 1] init: processing action (set_mmap_rnd_bits) from (<Builtin Action>:0)
<14>[ 3.987997] [1: init: 1] init: processing action (set_kptr_restrict) from (<Builtin Action>:0)
<14>[ 3.988155] [1: init: 1] init: processing action (keychord_init) from (<Builtin Action>:0)
<14>[ 3.988238] [1: init: 1] init: processing action (console_init) from (<Builtin Action>:0)
<14>[ 3.988334] [1: init: 1] init: processing action (init) from (/init.rc:31)
<14>[ 3.989187] [1: init: 1] init: processing action (init) from (/init.recovery.qcom.rc:1)
<14>[ 3.989459] [1: init: 1] init: starting service 'qseecomd'...
<11>[ 3.990399] [2: init: 624] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 3.993757] [1: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 624) process group...
<14>[ 3.993913] [1: init: 1] init: Successfully killed process cgroup uid 0 pid 624 in 0ms
<11>[ 3.994095] [1: init: 1] init: do_start: Service qfintverify not found
<14>[ 3.994407] [1: init: 1] init: processing action (init) from (/init.recovery.qcom.rc:34)
<11>[ 3.994474] [1: init: 1] init: do_start: Service hwservicemanager not found
<11>[ 3.994536] [1: init: 1] init: do_start: Service boot-1-0 not found
<11>[ 3.994594] [1: init: 1] init: do_start: Service prepdecrypt not found
<14>[ 3.994664] [1: init: 1] init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
<14>[ 3.996122] [0: init: 1] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
<14>[ 3.996219] [0: init: 1] init: processing action (late-init) from (/init.rc:80)
<14>[ 3.996335] [0: init: 1] init: processing action (queue_property_triggers) from (<Builtin Action>:0)
<14>[ 3.996433] [0: init: 1] init: processing action (fs) from (/init.rc:51)
<6>[ 3.998377] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_print_frame
<6>[ 3.998442] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] TX 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
<6>[ 3.998525] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] +--------------------------------------------------------------------
<6>[ 3.998610] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx00 | -49 -43 -37 -33 -33 -29 -29 -19 -29 -31 -33 -29 -30 -40 -42 -40 -49
<6>[ 3.998694] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx01 | -48 -36 -28 -28 -29 -27 -25 -25 -32 -36 -38 -38 -38 -40 -40 -42 -48
<6>[ 3.998778] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx02 | -38 -22 -18 -22 -24 -22 -24 -22 -32 -32 -34 -34 -32 -32 -34 -34 -37
<6>[ 3.998862] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx03 | -51 -43 -37 -43 -45 -43 -43 -43 -50 -52 -50 -52 -48 -50 -50 -48 -54
<6>[ 3.998946] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx04 | -52 -46 -38 -48 -48 -50 -46 -48 -56 -56 -60 -56 -52 -56 -56 -56 -58
<6>[ 3.999029] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx05 | -47 -37 -29 -41 -40 -42 -40 -38 -49 -51 -51 -51 -45 -49 -47 -49 -49
<6>[ 3.999113] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx06 | -46 -32 -34 -36 -43 -41 -43 -35 -49 -51 -51 -51 -46 -48 -50 -48 -51
<6>[ 3.999196] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx07 | -46 -48 -46 -52 -55 -55 -53 -51 -62 -66 -64 -64 -59 -61 -63 -63 -71
<6>[ 3.999280] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx08 | -19 -49 -51 -55 -54 -56 -54 -52 -60 -60 -62 -58 -60 -62 -62 -64 -70
<6>[ 3.999364] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx09 | -14 -40 -40 -50 -45 -49 -47 -41 -51 -53 -57 -53 -53 -55 -55 -59 -60
<6>[ 3.999447] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx10 | -27 -41 -39 -47 -50 -48 -46 -40 -50 -52 -54 -52 -51 -57 -51 -59 -57
<6>[ 3.999530] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx11 | -47 -47 -43 -45 -48 -48 -48 -40 -56 -56 -54 -54 -51 -57 -57 -57 -58
<6>[ 3.999615] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx12 | -39 -45 -43 -47 -48 -50 -52 -42 -59 -55 -53 -55 -53 -59 -55 -59 -54
<6>[ 3.999698] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx13 | -13 -55 -53 -57 -62 -60 -60 -54 -67 -65 -69 -65 -63 -67 -63 -65 -63
<6>[ 3.999782] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx14 | -11 -53 -53 -57 -59 -57 -57 -53 -69 -65 -63 -61 -60 -64 -66 -62 -47
<6>[ 3.999865] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx15 | -10 -42 -42 -50 -54 -48 -52 -42 -57 -53 -55 -53 -50 -54 -54 -54 -24
<6>[ 3.999949] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx16 | -38 -44 -42 -52 -54 -54 -54 -42 -59 -59 -59 -57 -54 -58 -58 -58 -37
<6>[ 4.000055] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx17 | -62 -62 -56 -60 -65 -63 -65 -57 -68 -74 -70 -68 -67 -71 -69 -71 -67
<6>[ 4.000139] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx18 | -66 -64 -58 -64 -69 -65 -65 -59 -73 -73 -71 -69 -71 -73 -71 -79 -82
<6>[ 4.000247] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx19 | -55 -51 -49 -55 -57 -57 -59 -53 -63 -65 -65 -61 -62 -68 -68 -70 -88
<6>[ 4.000347] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx20 | -58 -52 -48 -54 -57 -59 -59 -55 -66 -66 -68 -64 -64 -72 -74 -78 -100
<6>[ 4.000446] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx21 | -68 -64 -58 -66 -71 -69 -73 -65 -79 -77 -77 -73 -73 -85 -83 -93 -117
<6>[ 4.000545] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx22 | -69 -63 -59 -67 -70 -70 -72 -68 -82 -78 -80 -76 -77 -87 -87 -95 -120
<6>[ 4.000644] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx23 | -57 -55 -49 -57 -60 -60 -64 -56 -70 -72 -72 -66 -70 -76 -82 -84 -105
<6>[ 4.000743] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx24 | -61 -53 -51 -57 -64 -62 -64 -58 -73 -73 -71 -69 -73 -81 -85 -91 -117
<6>[ 4.000842] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx25 | -70 -64 -64 -70 -76 -74 -74 -72 -88 -90 -84 -82 -84 -92 -92 -100 -127
<6>[ 4.000941] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx26 | -75 -65 -65 -73 -78 -76 -80 -78 -89 -91 -89 -85 -87 -91 -95 -97 -121
<6>[ 4.001040] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx27 | -62 -54 -56 -64 -68 -72 -72 -64 -79 -77 -75 -75 -73 -83 -83 -87 -106
<6>[ 4.001139] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx28 | -66 -58 -56 -64 -69 -69 -73 -67 -82 -78 -80 -76 -75 -81 -83 -83 -105
<6>[ 4.001238] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx29 | -64 -56 -56 -60 -67 -71 -71 -65 -80 -82 -78 -76 -75 -79 -77 -83 -98
<6>[ 4.001336] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx30 | -67 -51 -53 -59 -66 -70 -70 -62 -79 -79 -77 -71 -71 -73 -71 -75 -86
<6>[ 4.001435] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx31 | -65 -47 -49 -57 -63 -63 -67 -61 -75 -71 -69 -67 -64 -68 -62 -66 -77
<6>[ 4.001534] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx32 | -67 -49 -45 -49 -54 -58 -56 -52 -67 -65 -63 -59 -57 -61 -57 -63 -77
<6>[ 4.001632] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx33 | -63 -47 -45 -51 -52 -54 -54 -48 -64 -64 -60 -56 -54 -56 -56 -62 -76
<6>[ 4.001731] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx34 | -67 -49 -49 -53 -54 -54 -54 -46 -61 -61 -57 -55 -51 -57 -55 -59 -71
<6>[ 4.002052] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_run_rawdata_all: mutual 5 : Max/Min -10,-127 ##
<14>[ 4.017121] [1: init: 1] init: processing action (fs) from (/init.recovery.ldconfig.rc:1)
<14>[ 4.017221] [1: init: 1] init: processing action (fs) from (/init.recovery.nano.rc:1)
<14>[ 4.017343] [1: init: 1] init: processing action (load_system_props_action) from (/init.rc:69)
<12>[ 4.017455] [1: init: 1] init: Couldn't load property file: Unable to open '/system/build.prop': No such file or directory: No such file or directory
<12>[ 4.017577] [1: init: 1] init: Couldn't load property file: Unable to open '/odm/build.prop': No such file or directory: No such file or directory
<12>[ 4.017700] [1: init: 1] init: Couldn't load property file: Unable to open '/vendor/build.prop': No such file or directory: No such file or directory
<12>[ 4.017821] [1: init: 1] init: Couldn't load property file: Unable to open '/factory/factory.prop': No such file or directory: No such file or directory
<11>[ 4.019485] [1: init: 1] init: [libfs_mgr]Error parsing mount_flags
<11>[ 4.019563] [1: init: 1] init: [libfs_mgr]fs_mgr_read_fstab(): failed to load fstab from : '/etc/recovery.fstab'
<11>[ 4.019656] [1: init: 1] init: /recovery not specified in fstab
<14>[ 4.019745] [1: init: 1] init: processing action (load_persist_props_action) from (/init.rc:73)
<12>[ 4.019850] [1: init: 1] init: Couldn't load property file: Unable to open '/data/local.prop': No such file or directory: No such file or directory
<11>[ 4.019968] [1: init: 1] init: Unable to open persistent property directory "/data/property": No such file or directory
<14>[ 4.020207] [1: init: 1] init: processing action (firmware_mounts_complete) from (/init.rc:76)
<14>[ 4.020335] [1: init: 1] init: processing action (boot) from (/init.rc:57)
<6>[ 4.020554] [1: init: 1] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call :
<4>[ 4.020613] [1: init: 1] wdev null. Do nothing
<6>[ 4.020993] [1: init: 1] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call :
<4>[ 4.021050] [1: init: 1] wdev null. Do nothing
<14>[ 4.021280] [1: init: 1] init: starting service 'set_permissive'...
<14>[ 4.022083] [1: init: 1] init: starting service 'recovery'...
<14>[ 4.022714] [1: init: 1] init: starting service 'qseecomd'...
<11>[ 4.023399] [1: init: 1] init: property_set("ro.boottime.qseecomd", "4023071612") failed: property already set
<14>[ 4.023507] [1: init: 1] init: starting service 'ldconfigtxt'...
<11>[ 4.023673] [3: init: 628] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 4.024312] [1: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 628) process group...
<14>[ 4.024476] [1: init: 1] init: Successfully killed process cgroup uid 0 pid 628 in 0ms
<14>[ 4.024711] [1: init: 1] init: processing action (boot) from (/init.recovery.usb.rc:28)
<6>[ 4.026839] [1: init: 1] Mass Storage Function, version: 2009/09/11
<6>[ 4.026899] [1: init: 1] LUN: removable CD-ROM file: (no medium)
<6>[ 4.028802] [3: init: 1] file system registered
<4>[ 4.029076] [3: init: 1] CHRDEV "msm_usb_bridge" major number 214 goes below the dynamic allocation range
<6>[ 4.030195] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_read_frame: type 29
<6>[ 4.038899] [2: init: 1] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
<14>[ 4.039141] [2: init: 1] init: Service 'ldconfigtxt' (pid 629) exited with status 0
<6>[ 4.039792] [3: init: 1] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
<14>[ 4.050769] [2: init: 1] init: Service 'set_permissive' (pid 626) exited with status 0
<3>[ 4.064814] [0: recovery: 627] msm-dsi-display:[dsi_display_set_backlight] [SDE] dsi_display_set_backlight : flash_gamme not ready, save level(15000)
<11>[ 4.067417] [2: init: 1] selinux: avc: denied { set } for property=twrp.crash_counter pid=627 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
<11>[ 4.067417] [2: init: 1]
<11>[ 4.068384] [2: init: 1] init: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
<14>[ 4.068483] [2: init: 1] init: processing action (boot) from (/init.recovery.qcom.rc:31)
<14>[ 4.068578] [2: init: 1] init: processing action (enable_property_trigger) from (<Builtin Action>:0)
<14>[ 4.068689] [2: init: 1] init: processing action (ro.debuggable=1) from (/init.rc:116)
<14>[ 4.068779] [2: init: 1] init: processing action (service.adb.root=1) from (/init.rc:122)
<11>[ 4.068974] [2: init: 1] init: Unable to open '/sys/class/android_usb/android0/enable': Permission denied
<14>[ 4.069064] [2: init: 1] init: starting service 'adbd'...
<11>[ 4.069816] [2: init: 1] init: Unable to open '/sys/class/android_usb/android0/enable': Permission denied
<14>[ 4.069922] [1: init: 638] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
<6>[ 4.070069] [1: kworker/1:1: 74] CFG80211-INFO) wl_cfg80211_register_static_if :
<4>[ 4.070120] [1: kworker/1:1: 74] [STATIC_IF] Enter (swlan0) iftype:2
<6>[ 4.070382] [1: kworker/1:1: 74] CFG80211-INFO) wl_cfg80211_get_tx_power :
<4>[ 4.070428] [1: kworker/1:1: 74] device is not ready
<4>[ 4.070607] [1: kworker/1:1: 74] Register interface [swlan0] MAC: 00:xx:xx:xx:x9:66
<4>[ 4.070607] [1: kworker/1:1: 74]
<3>[ 4.070679] [2: recovery: 627] msm-dsi-display:[dsi_display_set_backlight] [SDE] dsi_display_set_backlight : flash_gamme not ready, save level(15000)
<6>[ 4.070767] [1: kworker/1:1: 74] CFG80211-INFO) wl_cfg80211_register_static_if :
<4>[ 4.070815] [1: kworker/1:1: 74] Static I/F (swlan0) Registered
<4>[ 4.070947] [1: kworker/1:1: 74] Error creating socket.
<4>[ 4.070986] [1: kworker/1:1: 74] dhd_module_init out
<7>[ 4.071034] [1: kworker/1:1: 74] initcall dhd_module_init+0x0/0x324 returned 0 after 159881 usecs
<6>[ 4.071417] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.071535] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.071660] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.071737] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [720, 720, 40, 40, 720, 40]
<6>[ 4.071815] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.071921] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.072046] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.072130] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [540, 540, 30, 30, 540, 30]
<6>[ 4.072201] [1: kworker/1:1: 74] Freeing unused kernel memory: 6144K
<6>[ 4.072252] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.072367] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.072504] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.072576] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [360, 360, 74, 74, 360, 74]
<6>[ 4.072875] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.072984] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.073109] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.073181] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [720, 720, 40, 40, 720, 40]
<6>[ 4.073252] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.073349] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.073465] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.073536] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [540, 540, 30, 30, 540, 30]
<6>[ 4.073607] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.073703] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.073816] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.073888] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [360, 360, 74, 74, 360, 74]
<6>[ 4.074183] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.074290] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.074403] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.074474] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [720, 720, 40, 40, 720, 40]
<6>[ 4.074549] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.074647] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.074758] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.074829] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [540, 540, 30, 30, 540, 30]
<6>[ 4.074900] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.074996] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.075111] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.075184] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [360, 360, 74, 74, 360, 74]
<6>[ 4.075427] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.075530] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.075642] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.075713] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [720, 720, 40, 40, 720, 40]
<6>[ 4.075783] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.075878] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.075988] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.076059] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [540, 540, 30, 30, 540, 30]
<6>[ 4.076131] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.076227] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.076335] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.076405] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [360, 360, 74, 74, 360, 74]
<6>[ 4.076542] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.076641] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.076758] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.076831] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [720, 720, 40, 40, 720, 40]
<6>[ 4.076902] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.076999] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.077109] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.077187] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [540, 540, 30, 30, 540, 30]
<6>[ 4.077252] [1: usb ffs open: 639] read descriptors
<6>[ 4.077292] [1: usb ffs open: 639] read strings
<6>[ 4.077322] [2: recovery: 627] msm-dsi-panel:[dsi_panel_get_mode:3747] dsi_panel_get_mode, new dsi_display_mode_priv_info at 0000000000000000, CPU2
<6>[ 4.077414] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_topology:2985] default topology: lm: 2 comp_enc:2 intf: 1
<6>[ 4.077524] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3083] partial update num_rois=1 enabled=1
<6>[ 4.077595] [2: recovery: 627] msm-dsi-panel:[dsi_panel_parse_roi_alignment:3038] roi alignment: [360, 360, 74, 74, 360, 74]
<6>[ 4.090096] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] execute_selftest: Self test start!
<3>[ 4.091541] [3:crtc_commit:117: 441] msm-dsi-display:[dsi_display_prepare] ++
<3>[ 4.091767] [3:crtc_commit:117: 441] msm-dsi-display:[dsi_display_prepare] --
<3>[ 4.091828] [3:crtc_commit:117: 441] msm-dsi-panel:[dsi_panel_enable:4345] ++
<6>[ 4.091877] [3:crtc_commit:117: 441] [SDE] ss_panel_on_pre : + ndx 0
<6>[ 4.091921] [3:crtc_commit:117: 441] [SDE] ss_panel_on_pre : manufacture_read_pre_tx_cmds
<6>[ 4.213325] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [218]samsung,manufacture_id0_rx_cmds_revA, addr: 0xda, off: 0, len: 1, buf: 91
<6>[ 4.214113] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [219]samsung,manufacture_id1_rx_cmds_revA, addr: 0xdb, off: 0, len: 1, buf: 20
<6>[ 4.214896] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [220]samsung,manufacture_id2_rx_cmds_revA, addr: 0xdc, off: 0, len: 1, buf: 47
<6>[ 4.215033] [0:crtc_commit:117: 441] [SDE] ss_panel_on_pre : manufacture id: 0x912047
<6>[ 4.215133] [0:crtc_commit:117: 441] [SDE] ss_panel_attach_set : panel_attach_status : 1
<3>[ 4.215234] [0:crtc_commit:117: 441] [SDE] ss_panel_revision : Invalid panel_rev(default rev : A)
<6>[ 4.215338] [0:crtc_commit:117: 441] [SDE] ss_panel_revision : panel_revision = A 0
<6>[ 4.215433] [0:crtc_commit:117: 441] [SDE] ss_panel_on_pre : Panel_Revision = A 0
<6>[ 4.215974] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [232]samsung,ldi_debug0_rx_cmds_revA, addr: 0xa, off: 0, len: 1, buf: 9f
<6>[ 4.216542] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [235]samsung,ldi_debug3_rx_cmds_revA, addr: 0xe, off: 0, len: 1, buf: 80
<6>[ 4.217324] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [234]samsung,ldi_debug2_rx_cmds_revA, addr: 0xee, off: 0, len: 1, buf: 00
<6>[ 4.218107] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [236]samsung,ldi_debug4_rx_cmds_revA, addr: 0x5, off: 0, len: 1, buf: 00
<6>[ 4.218245] [0:crtc_commit:117: 441] [SDE] ss_read_pps_data : nothing to do
<6>[ 4.218343] [0:crtc_commit:117: 441] [SDE] ss_panel_on_pre : panel dbg: 9f 80 0 0
<6>[ 4.219101] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [221]samsung,manufacture_date_rx_cmds_revA, addr: 0xa1, off: 4, len: 4, buf: 79 0e 01 29
<3>[ 4.219253] [0:crtc_commit:117: 441] [SDE] ss_manufacture_date_read : manufacture_date DSI0 = (201809140109) - year(2018) month(9) day(14) hour(1) min(9)
<6>[ 4.220342] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [222]samsung,ddi_id_rx_cmds_revA, addr: 0xd6, off: 0, len: 5, buf: d0 06 12 80 f2
<6>[ 4.220485] [0:crtc_commit:117: 441] [SDE] ss_ddi_id_read : DSI0 : d0 06 12 80 f2
<6>[ 4.221716] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [224]samsung,octa_id_rx_cmds_revA, addr: 0xc9, off: 1, len: 20, buf: 30 01 01 8f 41 33 52 44 31 53 38 38 45 45 45 42 52 30 36 37
<6>[ 4.221902] [0:crtc_commit:117: 441] [SDE] ss_octa_id_read : octa id: 30 01 01 8f 41 33 52 44 31 53 38 38 45 45 45 42 52 30 36 37
<6>[ 4.222680] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [227]samsung,elvss_rx_cmds_revA, addr: 0xb5, off: 22, len: 2, buf: 13 04
<6>[ 4.223908] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [228]samsung,irc_rx_cmds_revA, addr: 0xb8, off: 1, len: 17, buf: 12 00 00 13 00 00 00 00 00 00 00 00 00 00 00 00 00
<6>[ 4.226026] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [229]samsung,hbm_rx_cmds_revA, addr: 0xb3, off: 2, len: 34, buf: 07 3c 32 3b 79 79 79 79 7b 7a 7e 7e 7d 7e 7f 7e 80 80 80 81 82 81 6f 6c 70 70 75 72 57 36 4a 00 00 00
<6>[ 4.226875] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [231]samsung,mdnie_read_rx_cmds_revA, addr: 0xa1, off: 0, len: 4, buf: 0b a9 0c 6f
<3>[ 4.227021] [0:crtc_commit:117: 441] [SDE_mdnie] coordinate_tunning_calculate index_0 : 5, index_1 : 2, index_2 : 6, index_3 : 3, x : 0, y : 0
<3>[ 4.227159] [0:crtc_commit:117: 441] [SDE_mdnie] coordinate_tunning_calculate_D65 r : 255, g : 248, b : 239
<3>[ 4.227270] [0:crtc_commit:117: 441] [SDE_mdnie] coordinate_tunning_calculate_Adaptive r : 255, g : 255, b : 255
<6>[ 4.227419] [0:crtc_commit:117: 441] [SDE] ss_mdnie_read : DSI0 : X-2985 Y-3183
<6>[ 4.228185] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [223]samsung,cell_id_rx_cmds_revA, addr: 0xa1, off: 4, len: 7, buf: 79 0e 01 29 0a 04 47
<6>[ 4.228338] [0:crtc_commit:117: 441] [SDE] ss_cell_id_read : DSI0: 79 0e 01 29 0a 04 47 00 00 00 00
<6>[ 4.230528] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [216]samsung,smart_dimming_mtp_rx_cmds_revA, addr: 0xc8, off: 0, len: 34, buf: 00 58 18 7a 57 57 5b 59 57 5c 42 3e 48 46 3f 4b 55 4e 58 4f 47 52 2d 28 33 50 63 56 29 4a 36 66 62 32
<6>[ 4.230725] [0:crtc_commit:117: 441] [SDE] ss_panel_attach_set : panel_attach_status : 1
<3>[ 4.230825] [0:crtc_commit:117: 441] [SDE] ss_panel_revision : Invalid panel_rev(default rev : A)
<6>[ 4.230932] [0:crtc_commit:117: 441] [SDE] smart_dimming_init : ++ id3(71), panel_revision(A)
<3>[ 4.231035] [0:crtc_commit:117: 441] set_max_lux_table ldi_revision: 0x912047
<6>[ 4.231125] [0:crtc_commit:117: 441] [SDE] get_vreg_voltage : panel revision A
<3>[ 4.233002] [0:crtc_commit:117: 441] smart_dimming_init done
<6>[ 4.233085] [0:crtc_commit:117: 441] [SDE] ss_samart_dimming_init : DSI0 : --
<6>[ 4.233177] [0:crtc_commit:117: 441] [SDE] ss_samart_dimming_init_hmt : DSI0 : ++
<6>[ 4.235272] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [216]samsung,smart_dimming_mtp_rx_cmds_revA, addr: 0xc8, off: 0, len: 34, buf: 00 58 18 7a 57 57 5b 59 57 5c 42 3e 48 46 3f 4b 55 4e 58 4f 47 52 2d 28 33 50 63 56 29 4a 36 66 62 32
<6>[ 4.235468] [0:crtc_commit:117: 441] [SDE] ss_panel_attach_set : panel_attach_status : 1
<3>[ 4.235567] [0:crtc_commit:117: 441] [SDE] ss_panel_revision : Invalid panel_rev(default rev : A)
<6>[ 4.235673] [0:crtc_commit:117: 441] [SDE] smart_dimming_init_hmt : ++ id3(71), panel_revision(A)
<3>[ 4.235777] [0:crtc_commit:117: 441] set_max_lux_table ldi_revision: 0x912047
<6>[ 4.235867] [0:crtc_commit:117: 441] [SDE] get_vreg_voltage : panel revision A
<3>[ 4.236761] [0:crtc_commit:117: 441] smart_dimming_init_hmt done
<6>[ 4.236845] [0:crtc_commit:117: 441] [SDE] ss_make_sdimconf_hmt : [HMT] smart dimming done!
<6>[ 4.236943] [0:crtc_commit:117: 441] [SDE] ss_samart_dimming_init_hmt : DSI0 : --
<6>[ 4.237035] [0:crtc_commit:117: 441] [SDE] ss_self_display_init : Self Display Panel Data init
<6>[ 4.237140] [0:crtc_commit:117: 441] [SDE] make_self_dispaly_img_cmds : [178] total data size [1536]
<6>[ 4.237244] [0:crtc_commit:117: 441] [SDE] make_self_dispaly_img_cmds : cmd size [8] msg.tx_buf size [192]
<6>[ 4.237406] [0:crtc_commit:117: 441] [SDE] make_self_dispaly_img_cmds : [186] total data size [28800]
<6>[ 4.237511] [0:crtc_commit:117: 441] [SDE] make_self_dispaly_img_cmds : cmd size [150] msg.tx_buf size [192]
<6>[ 4.238488] [0:crtc_commit:117: 441] [SDE] make_self_dispaly_img_cmds : [195] total data size [230400]
<6>[ 4.238595] [0:crtc_commit:117: 441] [SDE] make_self_dispaly_img_cmds : cmd size [1200] msg.tx_buf size [192]
<6>[ 4.241300] [0:crtc_commit:117: 441] [SDE] make_self_dispaly_img_cmds : [203] total data size [115200]
<6>[ 4.241358] [0:crtc_commit:117: 441] [SDE] make_self_dispaly_img_cmds : cmd size [600] msg.tx_buf size [192]
<6>[ 4.242026] [0:crtc_commit:117: 441] [SDE] make_self_dispaly_img_cmds : [205] total data size [115200]
<6>[ 4.242086] [0:crtc_commit:117: 441] [SDE] make_self_dispaly_img_cmds : cmd size [600] msg.tx_buf size [192]
<6>[ 4.242777] [0:crtc_commit:117: 441] [SDE] ss_copr_get_cmd : EN(1) GAMMA(1) ILC(1) RE(0)
<6>[ 4.242832] [0:crtc_commit:117: 441] [SDE] ss_copr_get_cmd : ER(256) EG(256) EB(256) ERC(256) EGC(256) EBC(256)
<6>[ 4.242895] [0:crtc_commit:117: 441] [SDE] ss_copr_get_cmd : MAX_CNT(36000) ROI_EN(0)
<6>[ 4.242944] [0:crtc_commit:117: 441] [SDE] ss_copr_get_cmd : X_S(0) Y_S(0) X_E(0) Y_E(0)
<6>[ 4.242998] [0:crtc_commit:117: 441] [SDE] init_br_info : alloc size : 5826
<6>[ 4.244040] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [229]samsung,hbm_rx_cmds_revA, addr: 0xb3, off: 2, len: 34, buf: 07 3c 32 3b 79 79 79 79 7b 7a 7e 7e 7d 7e 7f 7e 80 80 80 81 82 81 6f 6c 70 70 75 72 57 36 4a 00 00 00
<6>[ 4.245100] [0:crtc_commit:117: 441] [SDE] ss_panel_data_read : [216]samsung,smart_dimming_mtp_rx_cmds_revA, addr: 0xc8, off: 0, len: 34, buf: 00 58 18 7a 57 57 5b 59 57 5c 42 3e 48 46 3f 4b 55 4e 58 4f 47 52 2d 28 33 50 63 56 29 4a 36 66 62 32
<6>[ 4.245223] [0:crtc_commit:117: 441] [SDE] table_parsing_data_S6E3HA8_AMB638RD01 : hbm_step : 12 normal_step : 74 hmd_step : 37
<6>[ 4.246588] [0:crtc_commit:117: 441] [SDE] update_candela_map_table : alloc for pac_candela_map_table
<6>[ 4.246829] [0:crtc_commit:117: 441] [SDE] samsung_panel_on_pre : +: ndx=0
<6>[ 4.246874] [0:crtc_commit:117: 441] [SDE] ss_panel_attach_set : panel_attach_status : 1
<3>[ 4.246926] [0:crtc_commit:117: 441] [SDE] samsung_panel_on_pre : DSI0 no poc_rx_cmds cmd
<6>[ 4.246976] [0:crtc_commit:117: 441] [SDE] samsung_panel_on_pre : -: ndx=0
<6>[ 4.247021] [0:crtc_commit:117: 441] [SDE] ss_panel_on_pre : -
<6>[ 4.257863] [0:crtc_commit:117: 441] [SDE] ss_panel_on_post : + ndx 0
<3>[ 4.257908] [0:crtc_commit:117: 441] [SDE] self_mask_img_write : ++
<3>[ 4.258604] [0:crtc_commit:117: 441] [SDE] self_mask_img_write : --
<3>[ 4.258650] [0:crtc_commit:117: 441] [SDE] self_mask_on : ++ (1)
<3>[ 4.258759] [0:crtc_commit:117: 441] [SDE] self_mask_on : --
<3>[ 4.258804] [0:crtc_commit:117: 441] [SDE] ss_brightness_dcs : flash_gamme not ready
<3>[ 4.258860] [0:crtc_commit:117: 441] [SDE_mdnie] hbm: 0 bypass: 0 accessibility: 0 app: 0 mode: 4 hdr: 0 night_mode: 0 whiteRGB: (0 0 0) color_lens: (0 0 0)
<6>[ 4.259215] [0:crtc_commit:117: 441] [SDE] ss_panel_on_post : -
<3>[ 4.259256] [0:crtc_commit:117: 441] msm-dsi-panel:[dsi_panel_enable:4361] --
<6>[ 4.333305] [3:crtc_commit:117: 441] [SDE] ss_event_frame_update : DISPLAY_ON
<6>[ 4.333459] [3: kworker/u16:2: 304] [SDE] flash_br_work_func :
<6>[ 4.334386] [3: kworker/u16:6: 324] spi_geni a9c000.spi: tx_fifo 32 rx_fifo 32 tx_width 32
<6>[ 4.344593] [2: kworker/u16:2: 304] [SDE] ss_panel_data_read : [229]samsung,hbm_rx_cmds_revA, addr: 0xb3, off: 2, len: 34, buf: 07 3c 32 3b 79 79 79 79 7b 7a 7e 7e 7d 7e 7f 7e 80 80 80 81 82 81 6f 6c 70 70 75 72 57 36 4a 00 00 00
<6>[ 4.345918] [1: kworker/u16:2: 304] [SDE] ss_panel_data_read : [216]samsung,smart_dimming_mtp_rx_cmds_revA, addr: 0xc8, off: 0, len: 34, buf: 00 58 18 7a 57 57 5b 59 57 5c 42 3e 48 46 3f 4b 55 4e 58 4f 47 52 2d 28 33 50 63 56 29 4a 36 66 62 32
<3>[ 4.349206] [0: recovery: 627] msm-dsi-display:[dsi_display_set_backlight] [SDE] dsi_display_set_backlight : flash_gamme not ready, save level(15000)
<6>[ 4.378788] [1: kworker/u16:2: 304] [SDE] init_br_info : alloc size : 5826
<6>[ 4.466545] [4: recovery: 627] EXT4-fs (sda22): mounted filesystem without journal. Opts:
<6>[ 4.500654] [4: recovery: 627] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
<6>[ 4.500718] [4: recovery: 627] SELinux: Context u:object_r:mnt_vendor_file:s0 is not valid (left unmapped).
<6>[ 4.501305] [4: recovery: 627] SELinux: Context u:object_r:persist_time_file:s0 is not valid (left unmapped).
<6>[ 4.519099] [4: recovery: 627] EXT4-fs (sda25): mounted filesystem with ordered data mode. Opts:
<6>[ 4.525545] [4: recovery: 627] EXT4-fs (sda29): Root reserved blocks 32768
<6>[ 4.527192] [4: recovery: 627] EXT4-fs (sda29): mounted filesystem with ordered data mode. Opts:
<6>[ 4.527258] [4: recovery: 627] SELinux: Context u:object_r:system_data_root_file:s0 is not valid (left unmapped).
<6>[ 4.580960] [4: recovery: 627] EXT4-fs (sda29): Root reserved blocks 32768
<6>[ 4.584550] [0: recovery: 627] EXT4-fs (sda29): mounted filesystem with ordered data mode. Opts:
<6>[ 4.630312] [2: recovery: 627] EXT4-fs (sda22): mounted filesystem without journal. Opts:
<6>[ 4.638596] [2: recovery: 627] EXT4-fs (sda22): mounted filesystem without journal. Opts:
<6>[ 4.640726] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_wait_for_ready: 1D, 41, 00, 00, 00, 00, 00, 00 [6]
<6>[ 4.640807] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] execute_selftest: Self test done!
<6>[ 4.643872] [2: recovery: 627] SELinux: Context u:object_r:vendor_data_file:s0 is not valid (left unmapped).
<6>[ 4.644655] [2: recovery: 627] SELinux: Context u:object_r:vendor_tombstone_data_file:s0 is not valid (left unmapped).
<6>[ 4.647684] [2: recovery: 627] SELinux: Context u:object_r:ramdump_vendor_data_file:s0 is not valid (left unmapped).
<6>[ 4.647888] [2: recovery: 627] SELinux: Context u:object_r:display_vendor_data_file:s0 is not valid (left unmapped).
<6>[ 4.648146] [2: recovery: 627] SELinux: Context u:object_r:lm_data_file:s0 is not valid (left unmapped).
<6>[ 4.648390] [2: recovery: 627] SELinux: Context u:object_r:vendor_media_data_file:s0 is not valid (left unmapped).
<6>[ 4.648637] [2: recovery: 627] SELinux: Context u:object_r:data_tzstorage_file:s0 is not valid (left unmapped).
<6>[ 4.648889] [2: recovery: 627] SELinux: Context u:object_r:data_qtee_file:s0 is not valid (left unmapped).
<6>[ 4.649159] [2: recovery: 627] SELinux: Context u:object_r:vendor_camera_data_file:s0 is not valid (left unmapped).
<6>[ 4.649387] [2: recovery: 627] SELinux: Context u:object_r:vendor_ramdump_data_file:s0 is not valid (left unmapped).
<6>[ 4.649747] [2: recovery: 627] SELinux: Context u:object_r:vendor_bt_data_file:s0 is not valid (left unmapped).
<6>[ 4.650122] [2: recovery: 627] SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
<6>[ 4.650375] [2: recovery: 627] SELinux: Context u:object_r:vendor_audio_data_file:s0 is not valid (left unmapped).
<6>[ 4.651170] [2: recovery: 627] SELinux: Context u:object_r:vendor_radio_data_file:s0 is not valid (left unmapped).
<6>[ 4.651483] [2: recovery: 627] SELinux: Context u:object_r:vendor_mbn_data_file:s0 is not valid (left unmapped).
<6>[ 4.651750] [2: recovery: 627] SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped).
<6>[ 4.652694] [2: recovery: 627] SELinux: Context u:object_r:vendor_time_data_file:s0 is not valid (left unmapped).
<6>[ 4.653023] [2: recovery: 627] SELinux: Context u:object_r:vendor_fm_data_file:s0 is not valid (left unmapped).
<6>[ 4.653264] [2: recovery: 627] SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
<6>[ 4.653595] [2: recovery: 627] SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped).
<6>[ 4.653753] [2: recovery: 627] SELinux: Context u:object_r:qti_logkit_priv_data_file:s0 is not valid (left unmapped).
<6>[ 4.654000] [2: recovery: 627] SELinux: Context u:object_r:qti_logkit_pub_data_file:s0 is not valid (left unmapped).
<6>[ 4.654171] [2: recovery: 627] SELinux: Context u:object_r:qti_logkit_priv_socket:s0 is not valid (left unmapped).
<6>[ 4.654350] [2: recovery: 627] SELinux: Context u:object_r:qti_logkit_pub_socket:s0 is not valid (left unmapped).
<6>[ 4.654702] [2: recovery: 627] SELinux: Context u:object_r:swap_data_file:s0 is not valid (left unmapped).
<6>[ 4.654943] [2: recovery: 627] SELinux: Context u:object_r:vendor_vpp_data_file:s0 is not valid (left unmapped).
<6>[ 4.655217] [2: recovery: 627] SELinux: Context u:object_r:vendor_tui_data_file:s0 is not valid (left unmapped).
<6>[ 4.655474] [2: recovery: 627] SELinux: Context u:object_r:biometrics_vendor_data_file:s0 is not valid (left unmapped).
<6>[ 4.657436] [2: recovery: 627] SELinux: Context u:object_r:hal_neuralnetworks_data_file:s0 is not valid (left unmapped).
<6>[ 4.658001] [2: recovery: 627] SELinux: Context u:object_r:vendor_gatekeeper_data_file:s0 is not valid (left unmapped).
<6>[ 4.658174] [2: recovery: 627] SELinux: Context u:object_r:wifi_vendor_data_file:s0 is not valid (left unmapped).
<6>[ 4.658353] [2: recovery: 627] SELinux: Context u:object_r:hostapd_data_file:s0 is not valid (left unmapped).
<6>[ 4.658609] [2: recovery: 627] SELinux: Context u:object_r:wpa_data_file:s0 is not valid (left unmapped).
<6>[ 4.658959] [2: recovery: 627] SELinux: Context u:object_r:ipa_vendor_data_file:s0 is not valid (left unmapped).
<6>[ 4.659170] [2: recovery: 627] SELinux: Context u:object_r:netmgrd_data_file:s0 is not valid (left unmapped).
<6>[ 4.659452] [2: recovery: 627] SELinux: Context u:object_r:secure_storage_vendor_data_file:s0 is not valid (left unmapped).
<6>[ 4.659631] [2: recovery: 627] SELinux: Context u:object_r:snap_data_vendor_file:s0 is not valid (left unmapped).
<6>[ 4.659796] [2: recovery: 627] SELinux: Context u:object_r:vendor_log_file:s0 is not valid (left unmapped).
<6>[ 4.660120] [2: recovery: 627] SELinux: Context u:object_r:vendor_convergence_data_file:s0 is not valid (left unmapped).
<6>[ 4.660460] [2: recovery: 627] SELinux: Context u:object_r:sensors_vendor_data_file:s0 is not valid (left unmapped).
<6>[ 4.660652] [2: recovery: 627] SELinux: Context u:object_r:mediadrm_vendor_data_file:s0 is not valid (left unmapped).
<6>[ 4.662926] [2: recovery: 627] SELinux: Context u:object_r:face_vendor_data_file:s0 is not valid (left unmapped).
<6>[ 4.664267] [1: recovery: 627] SELinux: Context u:object_r:fingerprint_vendor_data_file:s0 is not valid (left unmapped).
<6>[ 4.677659] [0: recovery: 627] SELinux: Context u:object_r:nfc_logs_data_file:s0 is not valid (left unmapped).
<6>[ 4.677896] [0: recovery: 627] SELinux: Context u:object_r:credstore_data_file:s0 is not valid (left unmapped).
<6>[ 4.681272] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] SIG 46, 4C, 45, 53 VER 0, 0, 2, 20
<6>[ 4.681342] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] SIZ 0, 0, 8, 50 CRC CE, 42, B4, 77
<6>[ 4.681409] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] RES 0, 0, 0, 0 COU 0, 0, 0, 1C
<6>[ 4.681476] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] PAS 0, 0, 0, 1B FAI 0, 0, 0, 1
<6>[ 4.681543] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] CHA 0, 3, 11, 23 AMB 2, 6F, 1, DC
<6>[ 4.681608] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] RXS 0, 0, 0, 0 TXS 0, 0, 0, 0
<6>[ 4.681674] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] RXO 0, 0, 0, 0 TXO 0, 0, 0, 0
<6>[ 4.681740] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] RXG 0, 0, 0, 0 TXG 0, 0, 0, 0
<6>[ 4.681806] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] RXR 0, 0, 0, 0 TXT 0, 0, 0, 0
<6>[ 4.681871] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] RXT 0, 0, 0, 0 TXR 0, 0, 0, 0
<6>[ 4.682775] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 3 0 0 0
<6>[ 4.682877] [2: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: Normal changed
<6>[ 4.683680] [2: recovery: 627] SELinux: Context u:object_r:emergency_data_file:s0 is not valid (left unmapped).
<6>[ 4.684523] [2: recovery: 627] SELinux: Context u:object_r:network_watchlist_data_file:s0 is not valid (left unmapped).
<6>[ 4.694198] [1: recovery: 627] SELinux: Context u:object_r:update_engine_log_data_file:s0 is not valid (left unmapped).
<6>[ 4.694760] [1: recovery: 627] SELinux: Context u:object_r:wm_trace_data_file:s0 is not valid (left unmapped).
<6>[ 4.695003] [1: recovery: 627] SELinux: Context u:object_r:accessibility_trace_data_file:s0 is not valid (left unmapped).
<6>[ 4.695571] [1: recovery: 627] SELinux: Context u:object_r:user_profile_root_file:s0 is not valid (left unmapped).
<6>[ 4.696035] [1: recovery: 627] SELinux: Context u:object_r:user_profile_root_file:s0:c512,c768 is not valid (left unmapped).
<6>[ 4.720387] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_print_frame
<6>[ 4.720469] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] TX 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
<6>[ 4.720565] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] +--------------------------------------------------------------------
<6>[ 4.720666] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx00 | 519 526 526 528 528 527 527 526 528 527 527 528 519 527 520 528 515
<6>[ 4.720769] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx01 | 488 477 476 478 479 479 480 480 482 483 484 484 483 482 481 481 487
<6>[ 4.720871] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx02 | 488 477 477 478 481 480 481 482 483 485 486 485 484 483 481 481 487
<6>[ 4.720972] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx03 | 497 486 486 489 492 490 492 493 494 496 500 497 497 493 491 490 500
<6>[ 4.721073] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx04 | 494 486 486 489 492 490 492 493 494 497 500 497 497 493 491 491 496
<6>[ 4.721174] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx05 | 500 488 489 492 496 494 497 498 500 501 503 502 501 500 496 492 500
<6>[ 4.721276] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx06 | 502 492 492 496 500 500 500 503 504 506 505 504 504 502 501 500 503
<6>[ 4.721377] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx07 | 500 500 500 504 505 505 507 508 509 511 512 510 510 508 505 504 509
<6>[ 4.721478] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx08 | 488 503 504 508 510 510 511 514 514 516 516 515 515 513 510 509 514
<6>[ 4.721579] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx09 | 500 505 508 511 513 513 513 516 517 518 518 517 516 515 512 511 516
<6>[ 4.721680] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx10 | 508 509 510 513 515 515 517 519 519 520 520 519 518 517 514 513 516
<6>[ 4.721781] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx11 | 524 519 520 522 523 524 525 528 527 528 529 528 526 523 522 521 526
<6>[ 4.721883] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx12 | 524 520 521 524 525 526 527 529 528 530 529 528 528 525 523 522 525
<6>[ 4.721984] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx13 | 528 527 528 533 534 534 535 537 536 537 536 535 535 533 531 529 531
<6>[ 4.722085] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx14 | 534 535 536 539 541 542 542 543 543 544 543 543 542 539 537 536 536
<6>[ 4.722186] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx15 | 539 536 537 541 542 543 543 544 543 545 544 544 542 541 537 536 536
<6>[ 4.722287] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx16 | 546 543 544 547 550 550 551 552 551 552 552 551 550 547 543 543 542
<6>[ 4.722388] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx17 | 556 548 551 554 555 556 556 558 557 556 557 557 555 554 550 547 550
<6>[ 4.722490] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx18 | 561 555 557 560 561 562 562 563 562 562 562 561 559 556 554 553 556
<6>[ 4.722591] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx19 | 560 551 553 555 556 557 557 558 557 557 556 556 554 552 548 547 552
<6>[ 4.722692] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx20 | 562 555 555 558 558 559 560 560 559 559 559 557 556 554 551 550 555
<6>[ 4.722793] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx21 | 569 562 563 566 566 567 567 568 566 566 565 564 562 561 558 557 562
<6>[ 4.722894] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx22 | 571 564 566 568 568 569 568 570 569 568 569 566 564 563 561 559 564
<6>[ 4.722995] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx23 | 576 566 566 568 569 569 570 571 569 569 569 567 566 564 562 561 566
<6>[ 4.723096] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx24 | 575 567 566 569 569 570 570 572 570 569 569 568 566 564 563 562 566
<6>[ 4.723197] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx25 | 581 570 570 572 573 574 574 576 573 573 572 571 570 568 566 566 570
<6>[ 4.723298] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx26 | 582 572 573 574 576 576 576 577 576 574 574 573 571 569 568 567 571
<6>[ 4.723400] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx27 | 584 571 571 574 574 575 574 576 573 574 573 572 570 568 566 565 568
<6>[ 4.723501] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx28 | 586 576 575 578 579 579 580 581 578 580 579 577 575 573 570 570 573
<6>[ 4.723602] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx29 | 589 578 577 580 581 581 581 584 580 582 581 578 576 573 572 571 573
<6>[ 4.723703] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx30 | 595 583 583 585 586 586 586 590 586 588 587 582 580 578 575 575 578
<6>[ 4.723805] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx31 | 603 584 583 586 587 586 586 589 586 588 587 582 580 577 575 575 578
<6>[ 4.723906] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx32 | 600 583 583 585 584 584 584 589 585 587 586 580 579 576 574 574 576
<6>[ 4.724007] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx33 | 604 589 589 590 590 589 589 595 590 591 592 588 584 581 579 578 579
<6>[ 4.724108] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] Rx34 | 616 621 622 623 622 621 621 623 619 620 618 613 611 608 606 603 582
<6>[ 4.724437] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_run_rawdata_all: mutual 29 : Max/Min 623,476 ##
<6>[ 4.750219] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_fix_tmode
<6>[ 4.871170] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] read_pressure_data: Type:19, Left: 0, Center: -1227, Rignt: -686
<6>[ 4.950152] [4: kworker/4:0: 43] keys:flip_cover_work #1 : 1
<6>[ 4.950227] [4: kworker/4:0: 43] keys:certify_cover_work #1 : 0
<6>[ 4.960162] [3: kworker/3:1: 320] sec_debug_partition:check_magic_data: start
<6>[ 4.960676] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] read_pressure_data: Type:0, Left: 0, Center: 11253, Rignt: 10819
<6>[ 4.961067] [3: kworker/3:1: 320] sec_debug_partition:check_magic_data: end
<6>[ 4.961201] [3: kworker/3:1: 320] sec_debug_partition:init_ap_health_data: start
<6>[ 4.963020] [3: kworker/3:1: 320] sec_debug_partition:init_ap_health_data: end
<6>[ 4.963081] [3: kworker/3:1: 320] sec_debug_partition:init_lcd_debug_data: init_lcd_debug_data start
<6>[ 4.963150] [3: kworker/3:1: 320] sec_debug_partition:init_lcd_debug_data: init_lcd_debug_data lcd_debug size[132]
<6>[ 4.963881] [3: kworker/3:1: 320] sec_debug_partition:init_lcd_debug_data: init_lcd_debug_data end
<6>[ 4.963970] [3: kworker/3:1: 320] sec_debug_user_reset:sec_debug_update_reset_reason() partition[0] result[NP]
<6>[ 5.020572] [1: recovery: 627] SELinux: Context u:object_r:apex_module_data_file:s0 is not valid (left unmapped).
<6>[ 5.020824] [1: recovery: 627] SELinux: Context u:object_r:apex_wifi_data_file:s0 is not valid (left unmapped).
<6>[ 5.021342] [1: recovery: 627] SELinux: Context u:object_r:apex_scheduling_data_file:s0 is not valid (left unmapped).
<6>[ 5.021654] [1: recovery: 627] SELinux: Context u:object_r:apex_permission_data_file:s0 is not valid (left unmapped).
<6>[ 5.022550] [1: recovery: 627] SELinux: Context u:object_r:apex_art_data_file:s0 is not valid (left unmapped).
<6>[ 5.022873] [1: recovery: 627] SELinux: Context u:object_r:apex_rollback_data_file:s0 is not valid (left unmapped).
<6>[ 5.023037] [1: recovery: 627] SELinux: Context u:object_r:appcompat_data_file:s0 is not valid (left unmapped).
<6>[ 5.023243] [1: recovery: 627] SELinux: Context u:object_r:snapshotctl_log_data_file:s0 is not valid (left unmapped).
<6>[ 5.023409] [1: recovery: 627] SELinux: Context u:object_r:prereboot_data_file:s0 is not valid (left unmapped).
<6>[ 5.023573] [1: recovery: 627] SELinux: Context u:object_r:odrefresh_data_file:s0 is not valid (left unmapped).
<6>[ 5.023744] [1: recovery: 627] SELinux: Context u:object_r:odsign_data_file:s0 is not valid (left unmapped).
<6>[ 5.023906] [1: recovery: 627] SELinux: Context u:object_r:stats_data_file:s0 is not valid (left unmapped).
<6>[ 5.029352] [0: recovery: 627] SELinux: Context u:object_r:iorapd_data_file:s0 is not valid (left unmapped).
<6>[ 5.029827] [0: recovery: 627] SELinux: Context u:object_r:profcollectd_data_file:s0 is not valid (left unmapped).
<6>[ 5.030267] [0: recovery: 627] SELinux: Context u:object_r:perfetto_traces_data_file:s0 is not valid (left unmapped).
<6>[ 5.030435] [0: recovery: 627] SELinux: Context u:object_r:perfetto_traces_bugreport_data_file:s0 is not valid (left unmapped).
<6>[ 5.030668] [0: recovery: 627] SELinux: Context u:object_r:perfetto_configs_data_file:s0 is not valid (left unmapped).
<6>[ 5.031297] [1: recovery: 627] SELinux: Context u:object_r:apex_data_file:s0 is not valid (left unmapped).
<6>[ 5.032730] [0: recovery: 627] SELinux: Context u:object_r:apex_ota_reserved_file:s0 is not valid (left unmapped).
<6>[ 5.033288] [2: recovery: 627] SELinux: Context u:object_r:staging_data_file:s0 is not valid (left unmapped).
<6>[ 5.035249] [0: recovery: 627] SELinux: Context u:object_r:trace_data_file:s0 is not valid (left unmapped).
<6>[ 5.036115] [0: recovery: 627] SELinux: Context u:object_r:shell_test_data_file:s0 is not valid (left unmapped).
<6>[ 5.039682] [1: recovery: 627] SELinux: Context u:object_r:privapp_data_file:s0:c512,c768 is not valid (left unmapped).
<6>[ 5.050787] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] read_pressure_data: Type:6, Left: 0, Center: -1, Rignt: -1
<6>[ 5.095458] [1: recovery: 627] SELinux: Context u:object_r:privapp_data_file:s0:c31,c257,c512,c768 is not valid (left unmapped).
<6>[ 5.140718] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] read_pressure_data: Type:1, Left: 0, Center: -1, Rignt: -2
<6>[ 5.170648] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_run_rawdata_all: pressure cal data - Left: 0, Center: 516, Right: 0
<6>[ 5.170736] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_release_tmode
<6>[ 5.210065] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_run_rawdata_all: ito : 00 00 00 00
<6>[ 5.210178] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] sec_ts_run_rawdata_all: done (noise:0, wet:0)##
<6>[ 5.210305] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] mode:0202 noise:0 iq:1 lp:(40/-1) D0F000 // v:0313 cal:A2(00)C01T0307.LCIA.L F0201 // sp:0 e:1 id(0,0) // #1 1
<6>[ 5.576961] [4: recovery: 627] SELinux: Context u:object_r:privapp_data_file:s0 is not valid (left unmapped).
<6>[ 5.760251] [1: kworker/1:1: 74] tsens[1:506][2:483][3:473][4:483][7:535][8:483][9:473][10:469][5:489][6:502][11:430][12:440]
<6>[ 5.840187] [1: kworker/u16:0: 6] max77705_chgin_init_work
<6>[ 6.560238] [0: kworker/0:1: 73] wacom_w90xx 31-0056: [sec_input] pen_insert_work: pdct(1)
<6>[ 6.560384] [0: kworker/0:1: 73] wacom_w90xx 31-0056: [sec_input] pen_insert_work : pen is IN
<6>[ 6.644317] [4: recovery: 627] SELinux: Context u:object_r:privapp_data_file:s0:c32,c257,c512,c768 is not valid (left unmapped).
<6>[ 8.012429] [4: recovery: 627] SELinux: Context u:object_r:font_data_file:s0 is not valid (left unmapped).
<6>[ 8.025284] [4: recovery: 627] SELinux: Context u:object_r:environ_system_data_file:s0 is not valid (left unmapped).
<6>[ 8.026276] [4: recovery: 627] SELinux: Context u:object_r:dropbox_data_file:s0 is not valid (left unmapped).
<6>[ 8.037094] [4: recovery: 627] SELinux: Context u:object_r:users_system_data_file:s0 is not valid (left unmapped).
<6>[ 8.038140] [4: recovery: 627] SELinux: Context u:object_r:system_unsolzygote_socket:s0 is not valid (left unmapped).
<6>[ 8.048143] [4: recovery: 627] SELinux: Context u:object_r:packages_list_file:s0 is not valid (left unmapped).
<6>[ 8.107060] [4: recovery: 627] SELinux: Context u:object_r:storaged_data_file:s0 is not valid (left unmapped).
<6>[ 8.107204] [4: recovery: 627] SELinux: Context u:object_r:rollback_data_file:s0 is not valid (left unmapped).
<6>[ 8.110672] [4: recovery: 627] SELinux: Context u:object_r:apex_appsearch_data_file:s0 is not valid (left unmapped).
<6>[ 8.286930] [4: recovery: 627] SELinux: Context u:object_r:gsi_persistent_data_file:s0 is not valid (left unmapped).
<6>[ 8.287234] [4: recovery: 627] SELinux: Context u:object_r:gsi_data_file:s0 is not valid (left unmapped).
<6>[ 8.287771] [4: recovery: 627] SELinux: Context u:object_r:ota_image_data_file:s0 is not valid (left unmapped).
<6>[ 8.289287] [4: recovery: 627] SELinux: Context u:object_r:server_configurable_flags_data_file:s0 is not valid (left unmapped).
<6>[ 8.291160] [4: recovery: 627] SELinux: Context u:object_r:fota_data_file:s0 is not valid (left unmapped).
<6>[ 8.291694] [4: recovery: 627] SELinux: Context u:object_r:mediaserver_data_file:s0 is not valid (left unmapped).
<6>[ 8.294176] [4: recovery: 627] FAT-fs (sda17[259:1]): trying to mount...
<6>[ 8.295027] [4: recovery: 627] FAT-fs (sda17[259:1]): mounted successfully!
<6>[ 8.295581] [4: recovery: 627] FAT-fs (sda17[259:1]): trying to unmount...
<6>[ 8.295627] [4: recovery: 627] FAT-fs (sda17[259:1]): unmounted successfully!
<4>[ 8.301046] [4: recovery: 627] EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended
<6>[ 8.301785] [4: recovery: 627] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:
<4>[ 8.310142] [4: recovery: 627] EXT4-fs (sda24): warning: maximal mount count reached, running e2fsck is recommended
<6>[ 8.310805] [4: recovery: 627] EXT4-fs (sda24): mounted filesystem without journal. Opts:
<4>[ 8.317422] [4: recovery: 627] EXT4-fs (sda5): warning: checktime reached, running e2fsck is recommended
<6>[ 8.317845] [4: recovery: 627] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
<6>[ 8.324941] [4: recovery: 627] EXT4-fs (sda23): mounted filesystem without journal. Opts:
<6>[ 8.325589] [2: mmcqd/0: 386] mmc0: clock 50000000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 8.359665] [4: recovery: 627] FAT-fs (mmcblk0p1[179:1]): trying to mount...
<4>[ 8.373275] [0: recovery: 627] FAT-fs (mmcblk0p1[179:1]): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>[ 8.373396] [0: recovery: 627] FAT-fs (mmcblk0p1[179:1]): mounted successfully!
<6>[ 8.512505] [0: recovery: 627] FAT-fs (mmcblk0p1[179:1]): trying to unmount...
<6>[ 8.512653] [0: recovery: 627] FAT-fs (mmcblk0p1[179:1]): unmounted successfully!
<6>[ 8.710220] [3: kworker/3:1: 320] mmc0: clock 0Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<14>[ 9.023152] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 9.023761] [5: init: 1] init: property_set("ro.boottime.qseecomd", "9023454213") failed: property already set
<11>[ 9.026668] [0: init: 670] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 9.028302] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 670) process group...
<14>[ 9.028403] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 670 in 0ms
<6>[ 9.899893] [3: mmcqd/0: 386] mmc0: clock 50000000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 9.933250] [2: recovery: 627] FAT-fs (mmcblk0p1[179:1]): trying to mount...
<4>[ 9.945766] [0: recovery: 627] FAT-fs (mmcblk0p1[179:1]): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>[ 9.945853] [0: recovery: 627] FAT-fs (mmcblk0p1[179:1]): mounted successfully!
<3>[ 10.070258] [0: recovery: 627] msm-dsi-display:[dsi_display_set_backlight] [SDE] dsi_display_set_backlight : flash_gamme not ready, save level(5475)
<11>[ 10.077224] [5: init: 1] selinux: avc: denied { set } for property=sys.usb.config pid=627 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
<11>[ 10.077224] [5: init: 1]
<14>[ 10.077448] [5: init: 1] init: processing action (sys.usb.config=none) from (/init.recovery.usb.rc:67)
<11>[ 10.077625] [5: init: 1] init: Unable to write to '/config/usb_gadget/g1/UDC': No such device
<14>[ 10.077715] [5: init: 1] init: Sending signal 9 to service 'adbd' (pid 638) process group...
<3>[ 10.080288] [0: msm_watchdog: 77] [pet_watchdog] last_count : 4d689, new_count : 4d689, bark_time : 57fdf, bite_time : 6ffd6
<14>[ 10.083231] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 638 in 5ms
<14>[ 10.083530] [5: init: 1] init: Service 'adbd' (pid 638) killed by signal 9
<14>[ 10.083905] [5: init: 1] init: processing action (sys.usb.config=mtp,adb) from (/init.recovery.usb.rc:105)
<14>[ 10.083996] [5: init: 1] init: starting service 'adbd'...
<11>[ 10.084718] [5: init: 1] init: property_set("ro.boottime.adbd", "10084351244") failed: property already set
<14>[ 10.086419] [1: init: 680] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
<6>[ 10.098764] [1: usb ffs open: 683] read descriptors
<6>[ 10.098833] [1: usb ffs open: 683] read strings
<14>[ 10.099350] [4: init: 1] init: processing action (sys.usb.config=mtp,adb && sys.usb.ffs.ready=1) from (/init.recovery.usb.rc:108)
<6>[ 10.099722] [4: init: 1] usb: config_usb_cfg_link f->mtp
<6>[ 10.099808] [4: init: 1] usb: config_usb_cfg_link f->ffs
<6>[ 10.099985] [4: init: 1] usb: dwc3_gadget_pullup is_on: 1
<6>[ 10.102805] [1: recovery: 627] EXT4-fs (sda22): mounted filesystem without journal. Opts:
<6>[ 10.118113] [3: recovery: 627] EXT4-fs (sda22): mounted filesystem without journal. Opts:
<6>[ 10.260142] [2: kworker/2:0: 27] mmc0: clock 0Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 10.293365] [1: kworker/u16:6: 324] [SDE] ss_copr_read : ACTUAL_DISPLAY_ON
<6>[ 10.800424] [1: kworker/1:1: 74] tsens[1:526][2:506][3:492][4:506][7:539][8:506][9:489][10:489][5:509][6:526][11:436][12:449]
<6>[ 10.888649] [2: recovery: 681] mtp_open
<6>[ 10.898884] [1: mmcqd/0: 386] mmc0: clock 50000000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 11.260308] [1: kworker/1:1: 74] mmc0: clock 0Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 13.280117] [4: kworker/4:0: 43] usb_notify: reserve_state_check booting delay finished
<6>[ 13.281156] [2: kworker/u16:6: 324] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<6>[ 13.282740] [4: kworker/4:0: 43] muic-max77705:max77705_muic_print_reg_log USBC1:0x0f, USBC2:0x05, BC:0x00, UICINTM:0x4, attached_dev:0
<6>[ 13.282823] [4: kworker/4:0: 43] muic-max77705:max77705_muic_print_reg_log CC_STATUS0:0x0, CC_STATUS1:0x0, PD_STATUS0:0x0, PD_STATUS1:0x7, WDT:0, POR:0
<14>[ 14.023507] [4: init: 1] init: starting service 'qseecomd'...
<11>[ 14.024040] [4: init: 1] init: property_set("ro.boottime.qseecomd", "14023732909") failed: property already set
<11>[ 14.026193] [2: init: 691] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 14.027232] [4: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 691) process group...
<14>[ 14.027326] [4: init: 1] init: Successfully killed process cgroup uid 0 pid 691 in 0ms
<6>[ 15.840353] [1: kworker/1:1: 74] tsens[1:466][2:466][3:466][4:469][7:469][8:466][9:463][10:463][5:473][6:476][11:430][12:443]
<14>[ 19.023807] [4: init: 1] init: starting service 'qseecomd'...
<11>[ 19.024318] [4: init: 1] init: property_set("ro.boottime.qseecomd", "19024067907") failed: property already set
<11>[ 19.026833] [0: init: 692] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 19.027934] [4: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 692) process group...
<14>[ 19.028027] [4: init: 1] init: Successfully killed process cgroup uid 0 pid 692 in 0ms
<6>[ 19.046362] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.0 z:59 major:15 minor:15 p:C.C tc:1 type:0 noise:0,0
<6>[ 19.048184] [3: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 19.048311] [0: kworker/u16:4: 322] [VIB]: set_vibrator, value[1]
<6>[ 19.048390] [0: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 19.048606] [0: kworker/u16:4: 322] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 19.048670] [0: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 19.128762] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 19.128935] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 19.129616] [1: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 19.129741] [1: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 19.144960] [1: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:-20,-2 mc:8 tc:0 f:0 p:0 noise:0
<3>[ 19.680285] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4cca7, new_count : 4cca7, bark_time : 57fdf, bite_time : 6ffd6
<6>[ 20.338561] [1: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.1 z:53 major:13 minor:13 p:C.C tc:1 type:0 noise:0,0
<6>[ 20.339136] [5: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 20.339273] [2: kworker/u16:4: 322] [VIB]: set_vibrator, value[1]
<6>[ 20.339351] [2: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 20.340197] [2: kworker/u16:4: 322] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 20.340263] [2: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 20.378802] [1: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:0,0 mc:0 tc:0 f:1 p:0 noise:0
<6>[ 20.420337] [2: kworker/u16:4: 322] [VIB]: set_vibrator, value[0]
<6>[ 20.420510] [2: kworker/u16:4: 322] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 20.420990] [2: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 20.421108] [2: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 20.880258] [1: kworker/1:1: 74] tsens[1:492][2:483][3:489][4:526][7:499][8:605][9:499][10:492][5:509][6:516][11:430][12:443]
<6>[ 21.288896] [1: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.2 z:36 major:9 minor:9 p:C.C tc:1 type:0 noise:0,0
<6>[ 21.379221] [1: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:11,0 mc:7 tc:0 f:2 p:0 noise:0
<6>[ 21.456058] [5: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 21.456258] [2: kworker/u16:4: 322] [VIB]: set_vibrator, value[1]
<6>[ 21.456343] [2: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 21.457263] [1: kworker/u16:4: 322] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 21.457327] [1: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 21.537389] [1: kworker/u16:4: 322] [VIB]: set_vibrator, value[0]
<6>[ 21.537561] [1: kworker/u16:4: 322] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 21.538061] [1: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 21.538176] [1: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 22.264447] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.3 z:40 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 22.264937] [5: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 22.265087] [1: kworker/u16:4: 322] [VIB]: set_vibrator, value[1]
<6>[ 22.265167] [1: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 22.265982] [0: kworker/u16:4: 322] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 22.266051] [0: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 22.346132] [0: kworker/u16:4: 322] [VIB]: set_vibrator, value[0]
<6>[ 22.346294] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:-2,4 mc:4 tc:0 f:0 p:0 noise:0
<6>[ 22.346558] [0: kworker/u16:4: 322] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 22.347053] [0: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 22.347171] [0: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 23.623088] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.4 z:50 major:13 minor:13 p:C.N tc:1 type:0 noise:0,0
<6>[ 23.623534] [4: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 23.623747] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 23.623822] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 23.624602] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 23.624666] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 23.671787] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.N dd:5,-3 mc:5 tc:0 f:1 p:0 noise:0
<6>[ 23.704730] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 23.704906] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 23.705394] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 23.705520] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<14>[ 24.024126] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 24.024667] [5: init: 1] init: property_set("ro.boottime.qseecomd", "24024383218") failed: property already set
<11>[ 24.026227] [3: init: 693] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 24.027052] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 693) process group...
<14>[ 24.027145] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 693 in 0ms
<6>[ 24.162331] [2: kworker/u16:4: 322] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<6>[ 24.998705] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.5 z:59 major:15 minor:15 p:C.C tc:1 type:0 noise:0,0
<6>[ 24.999276] [6: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 24.999402] [1: kworker/u16:4: 322] [VIB]: set_vibrator, value[1]
<6>[ 24.999479] [1: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 25.000404] [1: kworker/u16:4: 322] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 25.000468] [1: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 25.055775] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:0,5 mc:4 tc:0 f:0 p:0 noise:0
<6>[ 25.080507] [1: kworker/u16:4: 322] [VIB]: set_vibrator, value[0]
<6>[ 25.080678] [1: kworker/u16:4: 322] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 25.081180] [1: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 25.081302] [1: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 25.920415] [1: kworker/1:1: 74] tsens[1:473][2:469][3:473][4:479][7:476][8:473][9:469][10:469][5:479][6:483][11:433][12:446]
<14>[ 29.024440] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 29.024949] [5: init: 1] init: property_set("ro.boottime.qseecomd", "29024701133") failed: property already set
<11>[ 29.026983] [3: init: 694] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 29.028037] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 694) process group...
<14>[ 29.028128] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 694 in 0ms
<3>[ 29.280439] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4ccad, new_count : 4ccad, bark_time : 57fdf, bite_time : 6ffd6
<6>[ 30.960497] [1: kworker/1:1: 74] tsens[1:456][2:453][3:453][4:456][7:453][8:453][9:453][10:449][5:459][6:463][11:430][12:440]
<6>[ 33.336327] [1: kworker/u16:6: 324] max77705_fg_read_vfocv: VFOCV(3707)mV, data(0xb966)
<6>[ 33.610180] [1: kworker/u16:6: 324] [FG] 0080h,ff9bh,7f80h,ff01h,1900h,02a8h,11cfh,5c49h,244ch,b4eeh,f8fah,fa85h,005dh,168fh,12c3h,0317h,0d0dh,03feh,4680h,5f00h,0558h,0148h,249ah,0152h,0ea9h,b55fh,2b16h,d9a3h,23d7h,0314h,0500h,02bbh,ffffh,6200h,2280h,0d8ah,1403h,2305h,249ah,7ffah,2472h,cea4h,2039h,0890h,e3e1h,290eh,0400h,0001h,7e9fh,5ebch,1002h,ffffh,1d7ah,0eeah,0bbah,05e0h,003ch,0c1ch,a7e2h,fa85h,1680h,1008h,573fh,e000h,07fch,03d4h,0a04h,0706h,b4ddh,05dch,568fh,06e2h,3181h,2241h,0225h,05a9h,05fch,0232h,88e9h,0d6ah,0000h,6ccfh,0002h,4f3ch,7f80h,0005h,0162h,0600h,0000h,006bh,090ch,0050h,0372h,0204h,0015h,0000h,133ch,0000h,0000h,0000h,0000h,0000h,0000h,0000h,0000h,0000h,0000h,0010h,003bh,ffffh,1378h,02dch,15c2h,0200h,0001h,0382h,0003h,0000h,051ch,0003h,4a96h,0010h,4690h,0000h,4000h,0000h,aca0h,1520h,ffffh,ffffh,ffffh,ffffh,20abh,0002h,0200h,00dah,3ffdh,4d77h,fdd2h,b966h,0035h,2910h,b4aeh,0fadh,
<6>[ 33.610767] [1: kworker/u16:6: 324] max77705_check_jig_status ret(0)
<6>[ 33.613414] [1: kworker/u16:6: 324] max77705_fg_read_qh : QH(562000)
<6>[ 33.613516] [1: kworker/u16:6: 324] [FG power] ISYS(568mA),ISYSAVG(510mA),VSYS(4352mV),IIN(615mA),VBYP(8658mV),QH(562000uah)
<7>[ 33.614052] [1: kworker/u16:6: 324] max77705_fg_read_current: current=-568
<7>[ 33.615119] [1: kworker/u16:6: 324] max77705_fg_read_avg_current: avg_current=-440
<6>[ 33.619024] [1: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[2] Temp(362), Temp-ADC(6126)
<6>[ 33.623232] [2: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[3] Temp(362), Temp-ADC(6126)
<6>[ 33.626814] [2: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[12] Temp(374), Temp-ADC(5987)
<6>[ 33.630689] [2: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[6] Temp(399), Temp-ADC(5571)
<6>[ 33.634912] [2: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[10] Temp(362), Temp-ADC(6125)
<7>[ 33.635352] [2: kworker/u16:6: 324] max77705_fg_write_temp: temperature to (362, 0x2433)
<7>[ 33.637548] [2: kworker/u16:6: 324] max77705_fg_read_avg_current: avg_current=-440
<7>[ 33.637655] [2: kworker/u16:6: 324] max77705_get_fuelgauge_soc: soc(178)
<6>[ 33.637765] [2: kworker/u16:6: 324] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 33.638262] [2: kworker/u16:6: 324] max77705_get_input_current_type: reg:(0x12), charging_current:(475)
<6>[ 33.638767] [2: kworker/u16:6: 324] max77705_fg_get_scaled_capacity : current_standard(1000)
<6>[ 33.638878] [2: kworker/u16:6: 324] max77705_fg_get_scaled_capacity : CABLE TYPE(1) INPUT CURRENT(475) CHARGING MODE(NONE)
<6>[ 33.638993] [2: kworker/u16:6: 324] capacity_max (1000) scaled capacity(17.8), raw_soc(17.8)
<7>[ 33.639097] [2: kworker/u16:6: 324] max77705_fg_get_atomic_capacity : NOW(17), OLD(17)
<6>[ 33.639216] [2: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(3618mV),Inow(-568mA),Imax(475mA),Ichg(550mA),SOC(17%),Tbat(362),Tusb(374),Tchg(399),Twpc(362)
<6>[ 33.639800] [2: kworker/u16:6: 324] sec_bat_swelling_check: swelling highblock(410), highrecov(390)
<7>[ 33.640318] [2: kworker/u16:6: 324] max77705_get_float_voltage: battery cv reg : 0x13, float voltage val : 4350
<6>[ 33.640440] [2: kworker/u16:6: 324] sec_bat_swelling_check: status(2), swell_mode(0:1:0), cv(4350)mV, temp(362)
<6>[ 33.640555] [2: kworker/u16:6: 324] sec_bat_set_current_event: current event before(0x40), after(0x40)
<6>[ 33.640664] [2: kworker/u16:6: 324] sec_bat_set_current_event: current event before(0x40), after(0x40)
<6>[ 33.648556] [1: kworker/u16:6: 324] max77705 : [0xb1]0x1e, [0xb2]0x9f, [0xb3]0x80, [0xb4]0x78, [0xb5]0x00, [0xb6]0xff, [0xb7]0x14, [0xb8]0x38, [0xb9]0x4b, [0xba]0x9d, [0xbb]0x13, [0xbc]0x3c, [0xbd]0x6d, [0xbe]0x34, [0xbf]0x02, [0xc0]0x92, [0xc1]0x10, [0xc2]0x00, [0xc3]0x60,
<6>[ 33.649588] [3: kworker/u16:6: 324] max77705_chg_monitor_work: [CHG] MODE(0x4), B2SOVRC(0xc), otg_on(0)
<6>[ 33.649737] [3: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(NONE, NONE, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(NONE, 0), sleep_mode(0), Cycle(-1)
<6>[ 33.650170] [3: kworker/3:1: 320] sec_bat_get_property cable type = 1 sleep_mode = 0
<7>[ 33.650842] [3: kworker/3:1: 320] max77705_fg_read_isys: isys_current=568
<6>[ 33.651303] [2: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_set_polling: Polling time 30/30 sec.
<7>[ 33.651710] [3: kworker/3:1: 320] max77705_fg_read_isys_avg: isys_avg_current=510
<14>[ 34.024732] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 34.025083] [5: init: 1] init: property_set("ro.boottime.qseecomd", "34024904724") failed: property already set
<11>[ 34.027090] [2: init: 695] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 34.028128] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 695) process group...
<14>[ 34.028211] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 695 in 0ms
<6>[ 35.043065] [0: kworker/u16:6: 324] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<6>[ 35.680378] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] mode:0202 noise:0 iq:1 lp:(40/-1) D0F000 // v:0313 cal:A2(00)C01T0307.LCIA.L F0201 // sp:0 e:1 id(0,0) // #2 1
<6>[ 35.827245] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 69 1 0 0 0 0 0
<6>[ 36.000341] [1: kworker/1:1: 74] tsens[1:446][2:446][3:449][4:449][7:449][8:446][9:446][10:446][5:453][6:456][11:423][12:433]
<6>[ 37.827404] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 69 0 0 0 0 0 0
<3>[ 38.880277] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4cca3, new_count : 4cca3, bark_time : 57fdf, bite_time : 6ffd6
<14>[ 39.024936] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 39.025284] [5: init: 1] init: property_set("ro.boottime.qseecomd", "39025099983") failed: property already set
<11>[ 39.027618] [2: init: 696] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 39.028631] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 696) process group...
<14>[ 39.028716] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 696 in 0ms
<6>[ 39.878948] [0: kworker/u16:2: 304] [SDE] flash_0xc8_read : read 0xC8 mpt_check_sum : 0x9ae flash_check_sum : 0x9ae cal_check_sum : 0x9ae
<6>[ 39.879091] [0: kworker/u16:2: 304] [SDE] flash_br_work_func : read write_check : 0x1 flash_check_sum : 0xd931 cal_check_sum : 0xd931
<6>[ 39.894450] [0: kworker/u16:2: 304] [SDE] set_normal_br_values : pac_cd_idx (431) cd_idx (16) cd (18) interpolation_cd (18)
<6>[ 39.894590] [1: kworker/u16:2: 304] [SDE] ss_acl_on : gradual_acl: 1, acl per: 0x48
<6>[ 39.908946] [1: kworker/u16:2: 304] [SDE] ss_brightness_dcs : level : 5475 candela : 18CD hbm : 0 (0) itp : FLASH
<6>[ 40.547215] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.6 z:63 major:16 minor:16 p:C.C tc:1 type:0 noise:0,0
<6>[ 40.548318] [3: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 40.549066] [3: kworker/u16:2: 304] [VIB]: set_vibrator, value[1]
<6>[ 40.549138] [3: kworker/u16:2: 304] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 40.550112] [3: kworker/u16:2: 304] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 40.550183] [3: kworker/u16:2: 304] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 40.596134] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:0,-4 mc:5 tc:0 f:0 p:0 noise:0
<6>[ 40.630223] [1: kworker/u16:2: 304] [VIB]: set_vibrator, value[0]
<6>[ 40.630390] [1: kworker/u16:2: 304] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 40.630842] [0: kworker/u16:2: 304] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 40.630955] [0: kworker/u16:2: 304] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 41.040275] [1: kworker/1:1: 74] tsens[1:473][2:459][3:466][4:506][7:476][8:579][9:479][10:473][5:483][6:486][11:423][12:433]
<14>[ 44.025154] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 44.025706] [5: init: 1] init: property_set("ro.boottime.qseecomd", "44025401387") failed: property already set
<11>[ 44.027751] [0: init: 698] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 44.028818] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 698) process group...
<14>[ 44.028908] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 698 in 0ms
<6>[ 44.624376] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.7 z:48 major:12 minor:12 p:C.C tc:1 type:0 noise:0,0
<6>[ 44.673127] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:6,2 mc:3 tc:0 f:0 p:0 noise:0
<6>[ 44.676680] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 44.676830] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 44.676907] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 44.677721] [1: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 44.677787] [1: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 44.717850] [1: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 44.718022] [1: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 44.718497] [1: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 44.718619] [1: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 44.806270] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.8 z:39 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 44.806454] [3: kworker/3:1: 320] cpufreq_limit_get: touch min same values(1132800,0) entered. just return.
<6>[ 44.881523] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:3,2 mc:3 tc:0 f:2 p:0 noise:0
<6>[ 44.903534] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 44.903702] [2: kworker/u16:4: 322] [VIB]: set_vibrator, value[1]
<6>[ 44.903785] [2: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 44.904443] [2: kworker/u16:4: 322] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 44.904508] [2: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 44.944576] [2: kworker/u16:4: 322] [VIB]: set_vibrator, value[0]
<6>[ 44.944741] [2: kworker/u16:4: 322] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 44.945216] [2: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 44.945331] [2: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 45.006380] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.9 z:53 major:13 minor:13 p:C.C tc:1 type:0 noise:0,0
<6>[ 45.073373] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:14,0 mc:5 tc:0 f:0 p:0 noise:0
<6>[ 45.073578] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 45.073711] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 45.073798] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 45.074462] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 45.074526] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 45.114576] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 45.114747] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 45.115222] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 45.115347] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 45.289874] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.10 z:40 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 45.340195] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:5,4 mc:4 tc:0 f:0 p:0 noise:0
<6>[ 45.340417] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 45.340507] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 45.340587] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 45.341213] [1: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 45.341279] [1: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 45.381323] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 45.381496] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 45.381967] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 45.382087] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 45.922127] [0: kworker/u16:6: 324] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<6>[ 46.066663] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.11 z:38 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 46.080183] [1: kworker/1:1: 74] tsens[1:473][2:463][3:463][4:466][7:489][8:463][9:456][10:456][5:469][6:476][11:420][12:433]
<6>[ 46.132259] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:10,6 mc:6 tc:0 f:0 p:0 noise:0
<6>[ 46.132478] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 46.132569] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 46.132844] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 46.133643] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 46.133708] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 46.173751] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 46.173921] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 46.174392] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 46.174534] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 46.683660] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.12 z:27 major:7 minor:7 p:e.C tc:1 type:0 noise:0,0
<6>[ 46.765927] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:e.C dd:0,0 mc:1 tc:0 f:0 p:0 noise:0
<6>[ 46.766152] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 46.766243] [0: kworker/u16:2: 304] [VIB]: set_vibrator, value[1]
<6>[ 46.766329] [0: kworker/u16:2: 304] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 46.767135] [0: kworker/u16:2: 304] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 46.767207] [0: kworker/u16:2: 304] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 46.807253] [0: kworker/u16:2: 304] [VIB]: set_vibrator, value[0]
<6>[ 46.807423] [0: kworker/u16:2: 304] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 46.807886] [0: kworker/u16:2: 304] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 46.808007] [0: kworker/u16:2: 304] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 46.965696] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.13 z:45 major:11 minor:11 p:C.C tc:1 type:0 noise:0,0
<6>[ 47.032726] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:8,-1 mc:4 tc:0 f:2 p:0 noise:0
<6>[ 47.032949] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 47.033042] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 47.033264] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 47.033887] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 47.033963] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 47.074005] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 47.074181] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 47.074653] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 47.074795] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 47.182503] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.14 z:36 major:9 minor:9 p:C.C tc:1 type:0 noise:0,0
<6>[ 47.257855] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:7,2 mc:3 tc:0 f:0 p:0 noise:0
<6>[ 47.260479] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 47.260836] [2: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 47.260919] [2: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 47.261544] [2: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 47.261609] [2: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 47.301672] [2: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 47.301836] [2: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 47.302346] [2: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 47.302483] [2: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 47.549352] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.15 z:38 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 47.658069] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:3,-1 mc:5 tc:0 f:2 p:0 noise:0
<6>[ 47.660703] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 47.661079] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 47.661161] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 47.661950] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 47.662015] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 47.702080] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 47.702252] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 47.702742] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 47.702881] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 47.958411] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.16 z:35 major:9 minor:9 p:C.C tc:1 type:0 noise:0,0
<6>[ 48.033253] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:8,-1 mc:3 tc:0 f:0 p:0 noise:0
<6>[ 48.033463] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 48.033554] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 48.033817] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 48.034580] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 48.034651] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 48.074695] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 48.074868] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 48.075345] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 48.075504] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<3>[ 48.480299] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4cca9, new_count : 4cca9, bark_time : 57fdf, bite_time : 6ffd6
<14>[ 49.025458] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 49.025960] [5: init: 1] init: property_set("ro.boottime.qseecomd", "49025724198") failed: property already set
<11>[ 49.028059] [0: init: 699] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 49.029119] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 699) process group...
<14>[ 49.029209] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 699 in 0ms
<6>[ 49.426820] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.17 z:33 major:8 minor:8 p:C.C tc:1 type:0 noise:0,0
<6>[ 49.509053] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:9,1 mc:3 tc:0 f:1 p:0 noise:0
<6>[ 49.520569] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 49.520661] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 49.520739] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 49.521619] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 49.521684] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 49.561733] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 49.561893] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 49.562361] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 49.562507] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 50.118800] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.18 z:27 major:7 minor:7 p:e.C tc:1 type:0 noise:0,0
<6>[ 50.209438] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:e.C dd:2,2 mc:2 tc:0 f:1 p:0 noise:0
<6>[ 50.220709] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 50.220802] [0: kworker/u16:4: 322] [VIB]: set_vibrator, value[1]
<6>[ 50.220879] [0: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 50.221741] [2: kworker/u16:4: 322] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 50.221808] [2: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 50.261856] [2: kworker/u16:4: 322] [VIB]: set_vibrator, value[0]
<6>[ 50.262008] [2: kworker/u16:4: 322] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 50.262480] [2: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 50.262595] [2: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 50.375889] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.19 z:40 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 50.451157] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:-5,9 mc:6 tc:0 f:2 p:0 noise:0
<6>[ 50.453918] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 50.454103] [3: kworker/u16:2: 304] [VIB]: set_vibrator, value[1]
<6>[ 50.454182] [3: kworker/u16:2: 304] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 50.454808] [3: kworker/u16:2: 304] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 50.454873] [3: kworker/u16:2: 304] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 50.494934] [3: kworker/u16:2: 304] [VIB]: set_vibrator, value[0]
<6>[ 50.495102] [3: kworker/u16:2: 304] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 50.495575] [3: kworker/u16:2: 304] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 50.495692] [3: kworker/u16:2: 304] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 50.534233] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.20 z:32 major:8 minor:8 p:C.C tc:1 type:0 noise:0,0
<6>[ 50.534403] [3: kworker/3:0: 35] cpufreq_limit_get: touch min same values(1132800,0) entered. just return.
<6>[ 50.642981] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:0,13 mc:8 tc:0 f:3 p:0 noise:0
<6>[ 50.653882] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 50.654068] [2: kworker/u16:4: 322] [VIB]: set_vibrator, value[1]
<6>[ 50.654153] [2: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 50.654784] [2: kworker/u16:4: 322] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 50.654849] [2: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 50.694908] [2: kworker/u16:4: 322] [VIB]: set_vibrator, value[0]
<6>[ 50.695075] [2: kworker/u16:4: 322] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 50.695544] [2: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 50.695658] [2: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 50.792791] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.21 z:43 major:11 minor:11 p:C.C tc:1 type:0 noise:0,0
<6>[ 50.876461] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:6,-1 mc:3 tc:0 f:0 p:0 noise:0
<6>[ 50.887261] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 50.887365] [2: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 50.887445] [2: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 50.888148] [2: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 50.888212] [2: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 50.928274] [2: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 50.928438] [2: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 50.928908] [2: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 50.929025] [2: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 51.034556] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.22 z:47 major:12 minor:12 p:C.C tc:1 type:0 noise:0,0
<6>[ 51.118237] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:2,1 mc:3 tc:0 f:2 p:0 noise:0
<6>[ 51.120193] [1: kworker/1:1: 74] tsens[1:545][2:502][3:492][4:509][7:615][8:509][9:489][10:489][5:519][6:545][11:433][12:443]
<6>[ 51.120648] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 51.120736] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 51.120821] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 51.121491] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 51.121556] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 51.161604] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 51.161771] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 51.162239] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 51.162357] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 51.728120] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.23 z:40 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 51.777014] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:2,4 mc:3 tc:0 f:0 p:0 noise:0
<6>[ 51.789355] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 51.789465] [2: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 51.789605] [2: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 51.790421] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 51.790487] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 51.830532] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 51.830705] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 51.831175] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 51.831297] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 52.203410] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.24 z:37 major:9 minor:9 p:E.C tc:1 type:0 noise:0,0
<6>[ 52.277325] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:E.C dd:4,2 mc:4 tc:0 f:0 p:0 noise:0
<6>[ 52.287518] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 52.287706] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 52.287787] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 52.288629] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 52.288693] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 52.328746] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 52.328907] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 52.329383] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 52.329499] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 53.103892] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.25 z:31 major:8 minor:8 p:E.C tc:1 type:0 noise:0,0
<6>[ 53.169497] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:E.C dd:2,0 mc:1 tc:0 f:-2 p:0 noise:0
<6>[ 53.169730] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 53.169826] [1: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 53.169905] [1: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 53.170779] [1: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 53.170842] [1: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 53.210898] [1: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 53.211049] [1: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 53.211519] [1: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 53.211635] [1: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 53.754210] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.26 z:37 major:9 minor:9 p:C.C tc:1 type:0 noise:0,0
<6>[ 53.844800] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:-5,2 mc:3 tc:0 f:0 p:0 noise:0
<6>[ 53.861854] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 53.862040] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 53.862216] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 53.863001] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 53.863066] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 53.903134] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 53.903301] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 53.903786] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 53.903929] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 54.019604] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.27 z:38 major:9 minor:9 p:E.C tc:1 type:0 noise:0,0
<14>[ 54.025780] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 54.026270] [5: init: 1] init: property_set("ro.boottime.qseecomd", "54026021800") failed: property already set
<11>[ 54.026956] [0: init: 700] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 54.027358] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 700) process group...
<14>[ 54.027446] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 700 in 0ms
<6>[ 54.111667] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:E.C dd:12,0 mc:4 tc:0 f:0 p:0 noise:0
<6>[ 54.128873] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 54.129012] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 54.129095] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 54.129744] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 54.129809] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 54.169884] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 54.170095] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 54.170579] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 54.170729] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 54.821579] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.28 z:42 major:11 minor:11 p:C.C tc:1 type:0 noise:0,0
<6>[ 54.895367] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:11,0 mc:4 tc:0 f:4 p:0 noise:0
<6>[ 54.922256] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 54.922468] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 54.922549] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 54.923391] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 54.923455] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 54.963504] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 54.963671] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 54.964148] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 54.964288] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 55.120161] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.29 z:42 major:11 minor:11 p:C.C tc:1 type:0 noise:0,0
<6>[ 55.203823] [0: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:10,-2 mc:6 tc:0 f:1 p:0 noise:0
<6>[ 55.220358] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 55.220548] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 55.220749] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 55.221521] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 55.221585] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 55.261650] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 55.261812] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 55.262284] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 55.262421] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 55.362038] [0: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.30 z:45 major:11 minor:11 p:C.C tc:1 type:0 noise:0,0
<6>[ 55.420685] [0: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:8,-1 mc:2 tc:0 f:0 p:0 noise:0
<6>[ 55.420902] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 55.420995] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 55.421256] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 55.421872] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 55.421937] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 55.462001] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 55.462174] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 55.462646] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 55.462789] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 55.587132] [0: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.31 z:56 major:14 minor:14 p:C.C tc:1 type:0 noise:0,0
<6>[ 55.654166] [0: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:2,0 mc:1 tc:0 f:1 p:0 noise:0
<6>[ 55.654393] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 55.654487] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 55.654571] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 55.655178] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 55.655242] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 55.695284] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 55.695459] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 55.695929] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 55.696072] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 56.160296] [1: kworker/1:1: 74] tsens[1:559][2:509][3:492][4:506][7:635][8:516][9:492][10:492][5:509][6:532][11:436][12:449]
<6>[ 56.380813] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.32 z:27 major:7 minor:7 p:e.C tc:1 type:0 noise:0,0
<6>[ 56.462952] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:e.C dd:0,0 mc:0 tc:0 f:0 p:0 noise:0
<6>[ 56.478401] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 56.478783] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 56.478866] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 56.479666] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 56.479730] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 56.519785] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 56.519948] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 56.520512] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 56.520631] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 56.546020] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.33 z:27 major:7 minor:7 p:e.C tc:1 type:0 noise:0,0
<6>[ 56.546202] [3: kworker/3:1: 320] cpufreq_limit_get: touch min same values(1132800,0) entered. just return.
<6>[ 56.638022] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:e.C dd:0,0 mc:0 tc:0 f:0 p:0 noise:0
<6>[ 56.644989] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 56.645269] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 56.645350] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 56.645967] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 56.646031] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 56.686084] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 56.686251] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 56.686726] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 56.686865] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 57.189540] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.34 z:44 major:11 minor:11 p:C.C tc:1 type:0 noise:0,0
<6>[ 57.254990] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:2,4 mc:3 tc:0 f:-1 p:0 noise:0
<6>[ 57.278117] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 57.278324] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 57.278527] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 57.279327] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 57.279392] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 57.319455] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 57.319623] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 57.320106] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 57.320245] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 57.441334] [0: kworker/u16:2: 304] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<3>[ 58.080303] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4cca8, new_count : 4cca8, bark_time : 57fdf, bite_time : 6ffd6
<6>[ 58.206763] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.35 z:46 major:12 minor:12 p:C.C tc:1 type:0 noise:0,0
<6>[ 58.272341] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:2,0 mc:2 tc:0 f:-2 p:0 noise:0
<6>[ 58.272564] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 58.272655] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 58.272867] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 58.273672] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 58.273737] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 58.313781] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 58.313959] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 58.314431] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 58.314565] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 58.322032] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.36 z:30 major:8 minor:8 p:E.C tc:1 type:0 noise:0,0
<6>[ 58.322203] [3: kworker/3:0: 35] cpufreq_limit_get: touch min same values(1132800,0) entered. just return.
<6>[ 58.414111] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:E.C dd:2,2 mc:3 tc:0 f:0 p:0 noise:0
<6>[ 58.434002] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 58.434362] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 58.434441] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 58.435054] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 58.435119] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 58.475179] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 58.475351] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 58.475823] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 58.475956] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 58.613952] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.37 z:51 major:13 minor:13 p:C.C tc:1 type:0 noise:0,0
<6>[ 58.672585] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:3,1 mc:2 tc:0 f:-2 p:0 noise:0
<6>[ 58.672806] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 58.672897] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 58.673151] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 58.673755] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 58.673830] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 58.713875] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 58.714049] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 58.714516] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 58.714653] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 58.789027] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.38 z:42 major:11 minor:11 p:C.C tc:1 type:0 noise:0,0
<6>[ 58.789212] [3: kworker/3:0: 35] cpufreq_limit_get: touch min same values(1132800,0) entered. just return.
<6>[ 58.847679] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:2,3 mc:3 tc:0 f:-1 p:0 noise:0
<6>[ 58.867221] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 58.867586] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 58.867665] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 58.868281] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 58.868344] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 58.908403] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 58.908573] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 58.909047] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 58.909182] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<14>[ 59.026079] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 59.026545] [5: init: 1] init: property_set("ro.boottime.qseecomd", "59026324090") failed: property already set
<11>[ 59.027161] [0: init: 701] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 59.027614] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 701) process group...
<14>[ 59.027703] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 701 in 0ms
<6>[ 60.358028] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.39 z:41 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 60.415270] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:8,2 mc:3 tc:0 f:1 p:0 noise:0
<6>[ 60.418682] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 60.418781] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 60.419027] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 60.419899] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 60.419964] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 60.460013] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 60.460230] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 60.460702] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 60.460837] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 61.200465] [1: kworker/1:1: 74] tsens[1:476][2:473][3:469][4:476][7:483][8:473][9:473][10:473][5:473][6:483][11:433][12:446]
<6>[ 61.833892] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.40 z:44 major:11 minor:11 p:C.C tc:1 type:0 noise:0,0
<6>[ 61.916037] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:21,-1 mc:8 tc:0 f:-2 p:0 noise:0
<6>[ 61.927891] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 61.927996] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 61.928077] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 61.928891] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 61.928956] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 61.969018] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 61.969189] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 61.969659] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 61.969808] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 62.057476] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.41 z:36 major:9 minor:9 p:C.C tc:1 type:0 noise:0,0
<6>[ 62.149498] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:2,3 mc:2 tc:0 f:0 p:0 noise:0
<6>[ 62.161290] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 62.161561] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 62.161642] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 62.162255] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 62.162319] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 62.202381] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 62.202553] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 62.203028] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 62.203169] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 62.484154] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.42 z:27 major:7 minor:7 p:E.C tc:1 type:0 noise:0,0
<6>[ 62.666484] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:13,0 mc:5 tc:0 f:2 p:0 noise:0
<6>[ 62.666710] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 62.666806] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 62.666962] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 62.667731] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 62.667807] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 62.707855] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 62.708026] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 62.708500] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 62.708641] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 63.542979] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.43 z:37 major:9 minor:9 p:C.C tc:1 type:0 noise:0,0
<6>[ 63.625197] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:3,3 mc:4 tc:0 f:0 p:0 noise:0
<6>[ 63.636934] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 63.637036] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 63.637286] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 63.638070] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 63.638135] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 63.651767] [2: kworker/u16:6: 324] max77705_fg_read_vcell: VCELL(3622)mV, data(0xb51a)
<6>[ 63.652366] [2: kworker/u16:6: 324] max77705_fg_read_vfocv: VFOCV(3707)mV, data(0xb95f)
<6>[ 63.652426] [2: kworker/u16:6: 324] max77705_fg_periodic_read: skip old(33) current(63)
<6>[ 63.652487] [2: kworker/u16:6: 324] max77705_check_jig_status ret(0)
<6>[ 63.654185] [0: kworker/u16:6: 324] max77705_fg_read_qh : QH(558000)
<6>[ 63.654239] [0: kworker/u16:6: 324] [FG power] ISYS(503mA),ISYSAVG(527mA),VSYS(4352mV),IIN(615mA),VBYP(8658mV),QH(558000uah)
<7>[ 63.654601] [0: kworker/u16:6: 324] max77705_fg_read_current: current=-503
<7>[ 63.655196] [0: kworker/u16:6: 324] max77705_fg_read_avg_current: avg_current=-518
<6>[ 63.658024] [1: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[2] Temp(360), Temp-ADC(6158)
<6>[ 63.660813] [0: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[3] Temp(360), Temp-ADC(6158)
<6>[ 63.663602] [1: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[12] Temp(374), Temp-ADC(5994)
<6>[ 63.666372] [1: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[6] Temp(400), Temp-ADC(5543)
<6>[ 63.669143] [1: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[10] Temp(360), Temp-ADC(6158)
<7>[ 63.669428] [1: kworker/u16:6: 324] max77705_fg_write_temp: temperature to (360, 0x2400)
<7>[ 63.670884] [0: kworker/u16:6: 324] max77705_fg_read_avg_current: avg_current=-518
<7>[ 63.670950] [0: kworker/u16:6: 324] max77705_get_fuelgauge_soc: soc(176)
<6>[ 63.671017] [0: kworker/u16:6: 324] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 63.671335] [0: kworker/u16:6: 324] max77705_get_input_current_type: reg:(0x12), charging_current:(475)
<6>[ 63.671657] [0: kworker/u16:6: 324] max77705_fg_get_scaled_capacity : current_standard(1000)
<6>[ 63.671721] [0: kworker/u16:6: 324] max77705_fg_get_scaled_capacity : CABLE TYPE(1) INPUT CURRENT(475) CHARGING MODE(NONE)
<6>[ 63.671793] [0: kworker/u16:6: 324] capacity_max (1000) scaled capacity(17.6), raw_soc(17.6)
<7>[ 63.671854] [0: kworker/u16:6: 324] max77705_fg_get_atomic_capacity : NOW(17), OLD(17)
<6>[ 63.671920] [0: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(3622mV),Inow(-503mA),Imax(475mA),Ichg(550mA),SOC(17%),Tbat(360),Tusb(374),Tchg(400),Twpc(360)
<6>[ 63.672312] [0: kworker/u16:6: 324] sec_bat_swelling_check: swelling highblock(410), highrecov(390)
<7>[ 63.672632] [0: kworker/u16:6: 324] max77705_get_float_voltage: battery cv reg : 0x13, float voltage val : 4350
<6>[ 63.672702] [0: kworker/u16:6: 324] sec_bat_swelling_check: status(2), swell_mode(0:1:0), cv(4350)mV, temp(360)
<6>[ 63.672771] [0: kworker/u16:6: 324] sec_bat_set_current_event: current event before(0x40), after(0x40)
<6>[ 63.672835] [0: kworker/u16:6: 324] sec_bat_set_current_event: current event before(0x40), after(0x40)
<6>[ 63.677711] [0: kworker/u16:6: 324] max77705 : [0xb1]0x1e, [0xb2]0x9f, [0xb3]0x80, [0xb4]0x78, [0xb5]0x00, [0xb6]0xff, [0xb7]0x14, [0xb8]0x38, [0xb9]0x4b, [0xba]0x9d, [0xbb]0x13, [0xbc]0x3c, [0xbd]0x6d, [0xbe]0x34, [0xbf]0x02, [0xc0]0x92, [0xc1]0x10, [0xc2]0x00, [0xc3]0x60,
<6>[ 63.678191] [3: kworker/u16:2: 304] [VIB]: set_vibrator, value[0]
<6>[ 63.678349] [3: kworker/u16:2: 304] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 63.678403] [0: kworker/u16:6: 324] max77705_chg_monitor_work: [CHG] MODE(0x4), B2SOVRC(0xc), otg_on(0)
<6>[ 63.678472] [0: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(NONE, NONE, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(NONE, 0), sleep_mode(0), Cycle(-1)
<6>[ 63.678669] [0: kworker/0:1: 73] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 63.679062] [1: kworker/u16:2: 304] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 63.679180] [1: kworker/u16:2: 304] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 63.679901] [1: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_set_polling: Polling time 30/30 sec.
<14>[ 64.026379] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 64.026909] [5: init: 1] init: property_set("ro.boottime.qseecomd", "64026650390") failed: property already set
<11>[ 64.029080] [0: init: 702] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 64.030134] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 702) process group...
<14>[ 64.030223] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 702 in 0ms
<6>[ 64.480138] [7: kworker/7:1: 388] usb: [M] manager_notifier_register: listener=24 register
<6>[ 64.480203] [7: kworker/7:1: 388] ccic_notifier_init
<3>[ 64.480244] [7: kworker/7:1: 388] ccic_notifier_init already registered
<6>[ 64.480295] [7: kworker/7:1: 388] usb: [M] manager_notifier_register USB & DP & BATTERY driver is registered! Alternate mode Start!
<6>[ 64.480373] [7: kworker/7:1: 388] max77705: max77705_set_enable_alternate_mode: is_first_booting : 1
<6>[ 64.480435] [7: kworker/7:1: 388] max77705: max77705_set_enable_alternate_mode: alternate mode is ready!
<6>[ 64.480498] [7: kworker/7:1: 388] max77705: max77705_set_enable_alternate_mode: [ON BOOTING TIME] !!!alternate mode is started!
<6>[ 64.480573] [7: kworker/7:1: 388] max77705: is_empty_usbc_cmd_queue: usbc_cmd_queue Empty(T)
<6>[ 64.480634] [7: kworker/7:1: 388] max77705: max77705_usbc_opcode_write: W->W opcode[0x55] write_length[1] read_length[1]
<6>[ 64.480704] [7: kworker/7:1: 388] max77705: front_usbc_cmd: Opcode(0x55)
<6>[ 64.480752] [7: kworker/7:1: 388] max77705: dequeue_usbc_cmd: Opcode(0x55) Response(0xff)
<6>[ 64.480808] [7: kworker/7:1: 388] max77705: max77705_usbc_cmd_run: No ISR
<6>[ 64.480857] [7: kworker/7:1: 388] max77705: max77705_i2c_opcode_write: opcode 0x55, write_length 2
<6>[ 64.480919] [7: kworker/7:1: 388] max77705: opcode_write: 00000000: 55 03
<6>[ 64.482295] [7: kworker/7:1: 388] max77705: max77705_set_enable_alternate_mode: !![ON BOOTING TIME] SEND THE PACKET REGARDING IN CASE OF VR/DP
<6>[ 64.485968] [7: kworker/7:1: 388] max77705: max77705_set_enable_alternate_mode: USBC1:0x07, USBC2:0x05, BC:0x00
<6>[ 64.486037] [7: kworker/7:1: 388] max77705: max77705_set_enable_alternate_mode: CC_STATUS0:0x0, CC_STATUS1:0x0, PD_STATUS0:0x0, PD_STATUS1:0x7
<6>[ 64.486119] [7: kworker/7:1: 388] max77705: max77705_set_enable_alternate_mode: UIC_INT_M:0x4, CC_INT_M:0x20, PD_INT_M:0x0, VDM_INT_M:0xf0
<6>[ 64.486418] [2:irq/42-max77705: 329] max77705:max77705_irq_thread: irq[42] 42/697/2037 irq_src=0x08 pmic_rev=0x03
<6>[ 64.487421] [7: kworker/7:1: 388] max77705: max77705_set_enable_alternate_mode: UIC_INT_M:0x4, CC_INT_M:0x20, PD_INT_M:0x0, VDM_INT_M:0xf0
<6>[ 64.487500] [7: kworker/7:1: 388] [drm-dp] secdp_ccic_noti_register_ex: success
<6>[ 64.487552] [7: kworker/7:1: 388] [drm-dp] secdp_ccic_noti_register: success
<6>[ 64.487603] [7: kworker/7:1: 388] [drm-dp] secdp_ccic_noti_register: cancel_work, rc(0)
<6>[ 64.489192] [2:irq/42-max77705: 329] [MAX77705] irq_reg, complete [1], 84, 0, 0, 0, f0
<6>[ 64.489301] [2:irq/42-max77705: 329] [MAX77705] dump_reg, f, 5, 0, 0, 0, 0, 0, 7
<6>[ 64.489405] [2:irq/42-max77705: 329] max77705: max77705_apcmd_irq: IRQ(709)_IN
<6>[ 64.489879] [2:irq/42-max77705: 329] max77705: max77705_apcmd_irq: [IN] sysmsg : 5
<6>[ 64.489984] [2:irq/42-max77705: 329] max77705: dequeue_usbc_cmd: Opcode(0xff) Response(0x55)
<6>[ 64.490175] [2:irq/42-max77705: 329] max77705: dequeue_usbc_cmd: front->next = NULL
<6>[ 64.490271] [2:irq/42-max77705: 329] max77705: is_empty_usbc_cmd_queue: usbc_cmd_queue Empty(T)
<6>[ 64.490373] [2:irq/42-max77705: 329] max77705: max77705_usbc_cmd_run: Apcmdres ISR !!!
<6>[ 64.490884] [2:irq/42-max77705: 329] max77705: max77705_i2c_opcode_read: opcode 0xff, read_length 2, ret_error 0
<6>[ 64.491003] [2:irq/42-max77705: 329] max77705: opcode_read: 00000000: 55 93
<6>[ 64.491096] [2:irq/42-max77705: 329] max77705: is_empty_usbc_cmd_queue: usbc_cmd_queue Empty(T)
<6>[ 64.491195] [2:irq/42-max77705: 329] max77705: max77705_usbc_cmd_run: Queue, Empty
<6>[ 64.491291] [2:irq/42-max77705: 329] max77705: max77705_apcmd_irq: IRQ(709)_OUT
<6>[ 64.491385] [2:irq/42-max77705: 329] max77705: is_empty_usbc_cmd_queue: usbc_cmd_queue Empty(T)
<6>[ 64.491488] [2:irq/42-max77705: 329] max77705_irq_thread doing_irq = 0, is_usbc_queue=0
<6>[ 65.277242] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.44 z:49 major:12 minor:12 p:C.C tc:1 type:0 noise:0,0
<6>[ 65.326098] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:9,0 mc:3 tc:0 f:-1 p:0 noise:0
<6>[ 65.338339] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 65.338616] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 65.338693] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 65.339450] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 65.339515] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 65.379563] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 65.379721] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 65.380328] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 65.380439] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 65.710792] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.45 z:37 major:9 minor:9 p:C.C tc:1 type:0 noise:0,0
<6>[ 65.760140] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] mode:0202 noise:0 iq:1 lp:(40/-1) D0F000 // v:0313 cal:A2(00)C01T0307.LCIA.L F0201 // sp:0 e:1 id(0,0) // #3 0
<6>[ 65.809705] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:3,4 mc:5 tc:0 f:-1 p:0 noise:0
<6>[ 65.809926] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 65.810018] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 65.810148] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 65.810964] [1: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 65.811030] [1: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 65.851090] [1: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 65.851244] [1: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 65.851717] [1: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 65.851840] [1: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 66.169428] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.46 z:52 major:13 minor:13 p:C.C tc:1 type:0 noise:0,0
<6>[ 66.240205] [1: kworker/1:1: 74] tsens[1:545][2:502][3:489][4:506][7:618][8:502][9:486][10:486][5:512][6:535][11:433][12:446]
<6>[ 66.243334] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:-1,0 mc:1 tc:0 f:0 p:0 noise:0
<6>[ 66.243543] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 66.243635] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 66.243716] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 66.244482] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 66.244547] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 66.284587] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 66.284746] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 66.285211] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 66.285353] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 66.351419] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.47 z:39 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 66.351595] [3: kworker/3:1: 320] cpufreq_limit_get: touch min same values(1132800,0) entered. just return.
<6>[ 66.435137] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:9,0 mc:3 tc:0 f:-1 p:0 noise:0
<6>[ 66.438428] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 66.438729] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 66.438812] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 66.439407] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 66.439473] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 66.479520] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 66.479674] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 66.480139] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 66.480237] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 66.534871] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.48 z:53 major:13 minor:13 p:C.C tc:1 type:0 noise:0,0
<6>[ 66.535046] [3: kworker/3:1: 320] cpufreq_limit_get: touch min same values(1132800,0) entered. just return.
<6>[ 66.601891] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:8,1 mc:3 tc:0 f:2 p:0 noise:0
<6>[ 66.605213] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 66.605482] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 66.605563] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 66.606162] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 66.606226] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 66.646286] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 66.646446] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 66.646914] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 66.647051] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<3>[ 67.680511] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4ccaf, new_count : 4ccaf, bark_time : 57fdf, bite_time : 6ffd6
<6>[ 67.987126] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.49 z:31 major:8 minor:8 p:e.C tc:1 type:0 noise:0,0
<6>[ 68.085980] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:e.C dd:8,0 mc:3 tc:0 f:2 p:0 noise:0
<6>[ 68.086203] [4: recovery: 627] [VIB]: ON, Duration : 40 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 68.086300] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 68.086452] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 40
<6>[ 68.087206] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 68.087270] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 68.127316] [1: kworker/u16:4: 322] [VIB]: set_vibrator, value[0]
<6>[ 68.127482] [1: kworker/u16:4: 322] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 68.127975] [1: kworker/u16:4: 322] [FACTORY] setSensorCallback: state = 1, duration = 40
<6>[ 68.128099] [1: kworker/u16:4: 322] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 68.321238] [0: kworker/u16:4: 322] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<14>[ 69.026708] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 69.027217] [5: init: 1] init: property_set("ro.boottime.qseecomd", "69026973305") failed: property already set
<11>[ 69.029391] [0: init: 704] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 69.030488] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 704) process group...
<14>[ 69.030578] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 704 in 0ms
<6>[ 71.280373] [1: kworker/1:1: 74] tsens[1:446][2:449][3:446][4:453][7:453][8:449][9:453][10:449][5:453][6:456][11:430][12:436]
<6>[ 74.000487] [3: mmcqd/0: 386] mmc0: clock 50000000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<14>[ 74.027002] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 74.027346] [5: init: 1] init: property_set("ro.boottime.qseecomd", "74027166428") failed: property already set
<11>[ 74.029205] [0: init: 705] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 74.030340] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 705) process group...
<14>[ 74.030461] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 705 in 0ms
<6>[ 74.200402] [3: kworker/3:1: 320] mmc0: clock 0Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 74.723409] [4: kworker/4:0: 43] muic-max77705:max77705_muic_print_reg_log USBC1:0x0f, USBC2:0x05, BC:0x00, UICINTM:0x4, attached_dev:0
<6>[ 74.723498] [4: kworker/4:0: 43] muic-max77705:max77705_muic_print_reg_log CC_STATUS0:0x0, CC_STATUS1:0x0, PD_STATUS0:0x0, PD_STATUS1:0x7, WDT:0, POR:0
<6>[ 76.320451] [1: kworker/1:1: 74] tsens[1:443][2:446][3:443][4:449][7:446][8:449][9:446][10:446][5:446][6:449][11:423][12:430]
<3>[ 77.280506] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4cca8, new_count : 4cca8, bark_time : 57fdf, bite_time : 6ffd6
<14>[ 79.027216] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 79.027700] [5: init: 1] init: property_set("ro.boottime.qseecomd", "79027476843") failed: property already set
<11>[ 79.029795] [0: init: 706] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 79.031553] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 706) process group...
<14>[ 79.031641] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 706 in 0ms
<6>[ 79.202234] [1: kworker/u16:6: 324] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<6>[ 81.360261] [1: kworker/1:1: 74] tsens[1:516][2:463][3:453][4:463][7:588][8:469][9:453][10:449][5:463][6:492][11:420][12:426]
<14>[ 84.027527] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 84.028009] [5: init: 1] init: property_set("ro.boottime.qseecomd", "84027775382") failed: property already set
<11>[ 84.030208] [0: init: 707] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 84.031502] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 707) process group...
<14>[ 84.031594] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 707 in 0ms
<6>[ 86.400441] [1: kworker/1:1: 74] tsens[1:430][2:430][3:430][4:433][7:433][8:433][9:433][10:430][5:433][6:436][11:416][12:423]
<3>[ 86.880380] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4cca4, new_count : 4cca4, bark_time : 57fdf, bite_time : 6ffd6
<14>[ 89.027803] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 89.028139] [5: init: 1] init: property_set("ro.boottime.qseecomd", "89027965901") failed: property already set
<11>[ 89.029844] [0: init: 708] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 89.031654] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 708) process group...
<14>[ 89.031736] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 708 in 0ms
<6>[ 90.082335] [1: kworker/u16:2: 304] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<6>[ 91.440439] [1: kworker/1:1: 74] tsens[1:426][2:426][3:430][4:430][7:430][8:430][9:426][10:426][5:430][6:433][11:410][12:420]
<6>[ 93.682765] [0: kworker/u16:6: 324] max77705_fg_read_vfocv: VFOCV(3707)mV, data(0xb95a)
<6>[ 93.682891] [0: kworker/u16:6: 324] max77705_fg_periodic_read: skip old(33) current(93)
<6>[ 93.683001] [0: kworker/u16:6: 324] max77705_check_jig_status ret(0)
<6>[ 93.685402] [0: kworker/u16:6: 324] max77705_fg_read_qh : QH(555000)
<6>[ 93.685505] [0: kworker/u16:6: 324] [FG power] ISYS(560mA),ISYSAVG(479mA),VSYS(4352mV),IIN(615mA),VBYP(8658mV),QH(555000uah)
<7>[ 93.686023] [0: kworker/u16:6: 324] max77705_fg_read_current: current=-560
<7>[ 93.686933] [0: kworker/u16:6: 324] max77705_fg_read_avg_current: avg_current=-311
<6>[ 93.691156] [0: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[2] Temp(359), Temp-ADC(6177)
<6>[ 93.694787] [1: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[3] Temp(359), Temp-ADC(6177)
<6>[ 93.698520] [1: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[12] Temp(374), Temp-ADC(6000)
<6>[ 93.702270] [0: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[6] Temp(391), Temp-ADC(5690)
<6>[ 93.705985] [1: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_value_by_adc:[10] Temp(359), Temp-ADC(6177)
<7>[ 93.706391] [1: kworker/u16:6: 324] max77705_fg_write_temp: temperature to (359, 0x23e6)
<7>[ 93.708486] [0: kworker/u16:6: 324] max77705_fg_read_avg_current: avg_current=-311
<7>[ 93.708597] [0: kworker/u16:6: 324] max77705_get_fuelgauge_soc: soc(176)
<6>[ 93.708708] [0: kworker/u16:6: 324] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 93.709200] [0: kworker/u16:6: 324] max77705_get_input_current_type: reg:(0x12), charging_current:(475)
<6>[ 93.709687] [0: kworker/u16:6: 324] max77705_fg_get_scaled_capacity : current_standard(1000)
<6>[ 93.709801] [0: kworker/u16:6: 324] max77705_fg_get_scaled_capacity : CABLE TYPE(1) INPUT CURRENT(475) CHARGING MODE(NONE)
<6>[ 93.709920] [0: kworker/u16:6: 324] capacity_max (1000) scaled capacity(17.6), raw_soc(17.6)
<7>[ 93.710024] [0: kworker/u16:6: 324] max77705_fg_get_atomic_capacity : NOW(17), OLD(17)
<6>[ 93.710255] [0: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(3619mV),Inow(-560mA),Imax(475mA),Ichg(550mA),SOC(17%),Tbat(359),Tusb(374),Tchg(391),Twpc(359)
<6>[ 93.710863] [0: kworker/u16:6: 324] sec_bat_swelling_check: swelling highblock(410), highrecov(390)
<7>[ 93.711357] [0: kworker/u16:6: 324] max77705_get_float_voltage: battery cv reg : 0x13, float voltage val : 4350
<6>[ 93.711481] [0: kworker/u16:6: 324] sec_bat_swelling_check: status(2), swell_mode(0:1:0), cv(4350)mV, temp(359)
<6>[ 93.711597] [0: kworker/u16:6: 324] sec_bat_set_current_event: current event before(0x40), after(0x40)
<6>[ 93.711707] [0: kworker/u16:6: 324] sec_bat_set_current_event: current event before(0x40), after(0x40)
<6>[ 93.718825] [0: kworker/u16:6: 324] max77705 : [0xb1]0x1e, [0xb2]0x9f, [0xb3]0x80, [0xb4]0x78, [0xb5]0x00, [0xb6]0xff, [0xb7]0x14, [0xb8]0x38, [0xb9]0x4b, [0xba]0x9d, [0xbb]0x13, [0xbc]0x3c, [0xbd]0x6d, [0xbe]0x34, [0xbf]0x02, [0xc0]0x92, [0xc1]0x10, [0xc2]0x00, [0xc3]0x60,
<6>[ 93.719769] [0: kworker/u16:6: 324] max77705_chg_monitor_work: [CHG] MODE(0x4), B2SOVRC(0xc), otg_on(0)
<6>[ 93.719914] [0: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(NONE, NONE, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(NONE, 0), sleep_mode(0), Cycle(-1)
<6>[ 93.720823] [0: kworker/0:1: 73] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 93.724049] [0: kworker/u16:6: 324] sec-battery soc:battery: sec_bat_set_polling: Polling time 30/30 sec.
<14>[ 94.028012] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 94.028508] [5: init: 1] init: property_set("ro.boottime.qseecomd", "94028263243") failed: property already set
<11>[ 94.030780] [0: init: 709] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 94.031807] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 709) process group...
<14>[ 94.031900] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 709 in 0ms
<6>[ 95.840424] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] mode:0202 noise:0 iq:1 lp:(40/-1) D0F000 // v:0313 cal:A2(00)C01T0307.LCIA.L F0201 // sp:0 e:1 id(0,0) // #4 1
<3>[ 96.480421] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4ccaa, new_count : 4ccaa, bark_time : 57fdf, bite_time : 6ffd6
<6>[ 96.480524] [1: kworker/1:1: 74] tsens[1:426][2:426][3:423][4:430][7:430][8:430][9:430][10:430][5:426][6:430][11:410][12:416]
<14>[ 99.028292] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 99.028624] [5: init: 1] init: property_set("ro.boottime.qseecomd", "99028446575") failed: property already set
<11>[ 99.030696] [0: init: 710] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 99.031706] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 710) process group...
<14>[ 99.031790] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 710 in 0ms
<6>[ 100.962169] [0: kworker/u16:6: 324] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<6>[ 101.520446] [1: kworker/1:1: 74] tsens[1:423][2:423][3:426][4:426][7:426][8:423][9:426][10:426][5:426][6:430][11:410][12:416]
<14>[ 104.028476] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 104.028808] [5: init: 1] init: property_set("ro.boottime.qseecomd", "104028631104") failed: property already set
<11>[ 104.031000] [0: init: 711] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 104.032014] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 711) process group...
<14>[ 104.032098] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 711 in 0ms
<3>[ 106.080429] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4cca8, new_count : 4cca8, bark_time : 57fdf, bite_time : 6ffd6
<6>[ 106.560403] [1: kworker/1:1: 74] tsens[1:430][2:426][3:426][4:430][7:430][8:433][9:430][10:430][5:430][6:433][11:410][12:416]
<14>[ 109.028683] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 109.029155] [5: init: 1] init: property_set("ro.boottime.qseecomd", "109028926050") failed: property already set
<11>[ 109.031480] [2: init: 712] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 109.032611] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 712) process group...
<14>[ 109.032703] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 712 in 0ms
<6>[ 111.600275] [1: kworker/1:1: 74] tsens[1:496][2:449][3:436][4:453][7:569][8:453][9:440][10:440][5:453][6:476][11:410][12:416]
<6>[ 112.482345] [1: kworker/u16:6: 324] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<14>[ 114.028977] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 114.029459] [5: init: 1] init: property_set("ro.boottime.qseecomd", "114029225579") failed: property already set
<11>[ 114.031635] [0: init: 713] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 114.032765] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 713) process group...
<14>[ 114.032857] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 713 in 0ms
<3>[ 115.680511] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4ccab, new_count : 4ccab, bark_time : 57fdf, bite_time : 6ffd6
<6>[ 116.640459] [1: kworker/1:1: 74] tsens[1:423][2:423][3:423][4:426][7:430][8:426][9:426][10:426][5:426][6:430][11:410][12:416]
<14>[ 119.029279] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 119.029771] [5: init: 1] init: property_set("ro.boottime.qseecomd", "119029535109") failed: property already set
<11>[ 119.031905] [0: init: 714] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 119.033047] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 714) process group...
<14>[ 119.033138] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 714 in 0ms
<6>[ 121.680500] [1: kworker/1:1: 74] tsens[1:423][2:423][3:423][4:426][7:426][8:426][9:426][10:423][5:426][6:430][11:406][12:413]
<6>[ 123.362134] [0: kworker/u16:2: 304] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<6>[ 123.726847] [0: kworker/u16:2: 304] max77705_fg_read_vfocv: VFOCV(3706)mV, data(0xb955)
<6>[ 123.726961] [0: kworker/u16:2: 304] max77705_fg_periodic_read: skip old(33) current(123)
<6>[ 123.727071] [0: kworker/u16:2: 304] max77705_check_jig_status ret(0)
<6>[ 123.729475] [0: kworker/u16:2: 304] max77705_fg_read_qh : QH(553000)
<6>[ 123.729579] [0: kworker/u16:2: 304] [FG power] ISYS(447mA),ISYSAVG(429mA),VSYS(4352mV),IIN(615mA),VBYP(8658mV),QH(553000uah)
<7>[ 123.730241] [0: kworker/u16:2: 304] max77705_fg_read_current: current=-447
<7>[ 123.731374] [0: kworker/u16:2: 304] max77705_fg_read_avg_current: avg_current=-293
<6>[ 123.735070] [1: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_value_by_adc:[2] Temp(361), Temp-ADC(6141)
<6>[ 123.738710] [1: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_value_by_adc:[3] Temp(361), Temp-ADC(6141)
<6>[ 123.742963] [0: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_value_by_adc:[12] Temp(373), Temp-ADC(6004)
<6>[ 123.746565] [1: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_value_by_adc:[6] Temp(387), Temp-ADC(5751)
<6>[ 123.750357] [1: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_value_by_adc:[10] Temp(361), Temp-ADC(6142)
<7>[ 123.750774] [1: kworker/u16:2: 304] max77705_fg_write_temp: temperature to (361, 0x2419)
<6>[ 123.752191] [0: kworker/u16:2: 304] max77705_fg_read_vcell: VCELL(3636)mV, data(0xb5ce)
<7>[ 123.753075] [0: kworker/u16:2: 304] max77705_fg_read_avg_current: avg_current=-293
<7>[ 123.753181] [0: kworker/u16:2: 304] max77705_get_fuelgauge_soc: soc(175)
<6>[ 123.753294] [0: kworker/u16:2: 304] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 123.753785] [0: kworker/u16:2: 304] max77705_get_input_current_type: reg:(0x12), charging_current:(475)
<6>[ 123.754265] [0: kworker/u16:2: 304] max77705_fg_get_scaled_capacity : current_standard(1000)
<6>[ 123.754378] [0: kworker/u16:2: 304] max77705_fg_get_scaled_capacity : CABLE TYPE(1) INPUT CURRENT(475) CHARGING MODE(NONE)
<6>[ 123.754497] [0: kworker/u16:2: 304] capacity_max (1000) scaled capacity(17.5), raw_soc(17.5)
<7>[ 123.754601] [0: kworker/u16:2: 304] max77705_fg_get_atomic_capacity : NOW(17), OLD(17)
<6>[ 123.754725] [0: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(3636mV),Inow(-447mA),Imax(475mA),Ichg(550mA),SOC(17%),Tbat(361),Tusb(373),Tchg(387),Twpc(361)
<6>[ 123.755288] [0: kworker/u16:2: 304] sec_bat_swelling_check: swelling highblock(410), highrecov(390)
<7>[ 123.755780] [0: kworker/u16:2: 304] max77705_get_float_voltage: battery cv reg : 0x13, float voltage val : 4350
<6>[ 123.755905] [0: kworker/u16:2: 304] sec_bat_swelling_check: status(2), swell_mode(0:1:0), cv(4350)mV, temp(361)
<6>[ 123.756022] [0: kworker/u16:2: 304] sec_bat_set_current_event: current event before(0x40), after(0x40)
<6>[ 123.756133] [0: kworker/u16:2: 304] sec_bat_set_current_event: current event before(0x40), after(0x40)
<6>[ 123.763537] [0: kworker/u16:2: 304] max77705 : [0xb1]0x1e, [0xb2]0x9f, [0xb3]0x80, [0xb4]0x78, [0xb5]0x00, [0xb6]0xff, [0xb7]0x14, [0xb8]0x38, [0xb9]0x4b, [0xba]0x9d, [0xbb]0x13, [0xbc]0x3c, [0xbd]0x6d, [0xbe]0x34, [0xbf]0x02, [0xc0]0x92, [0xc1]0x10, [0xc2]0x00, [0xc3]0x60,
<6>[ 123.764494] [0: kworker/u16:2: 304] max77705_chg_monitor_work: [CHG] MODE(0x4), B2SOVRC(0xc), otg_on(0)
<6>[ 123.764639] [0: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(NONE, NONE, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(NONE, 0), sleep_mode(0), Cycle(-1)
<6>[ 123.764993] [0: kworker/0:1: 73] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 123.768160] [0: kworker/u16:2: 304] sec-battery soc:battery: sec_bat_set_polling: Polling time 30/30 sec.
<14>[ 124.029565] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 124.029920] [5: init: 1] init: property_set("ro.boottime.qseecomd", "124029734586") failed: property already set
<11>[ 124.032355] [0: init: 715] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 124.033418] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 715) process group...
<14>[ 124.033505] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 715 in 0ms
<3>[ 125.280502] [2: msm_watchdog: 77] [pet_watchdog] last_count : 4cca8, new_count : 4cca8, bark_time : 57fdf, bite_time : 6ffd6
<6>[ 125.920264] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] mode:0202 noise:0 iq:1 lp:(40/-1) D0F000 // v:0313 cal:A2(00)C01T0307.LCIA.L F0201 // sp:0 e:1 id(0,0) // #5 2
<6>[ 126.720434] [1: kworker/1:1: 74] tsens[1:420][2:416][3:423][4:420][7:423][8:423][9:423][10:423][5:423][6:426][11:406][12:413]
<6>[ 127.616162] [0: recovery: 627] [SDE] set_normal_br_values : pac_cd_idx (1) cd_idx (1) cd (3) interpolation_cd (3)
<6>[ 127.616300] [1: recovery: 627] [SDE] ss_acl_on : gradual_acl: 1, acl per: 0x48
<6>[ 127.621453] [1: recovery: 627] [SDE] ss_brightness_dcs : level : 5 candela : 3CD hbm : 0 (0) itp : FLASH
<14>[ 129.029795] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 129.030338] [5: init: 1] init: property_set("ro.boottime.qseecomd", "129030093647") failed: property already set
<11>[ 129.032358] [0: init: 716] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 129.033469] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 716) process group...
<14>[ 129.033560] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 716 in 0ms
<6>[ 129.113711] [4: recovery: 627] [SDE] set_normal_br_values : pac_cd_idx (0) cd_idx (0) cd (2) interpolation_cd (2)
<6>[ 129.113775] [4: recovery: 627] [SDE] ss_acl_on : gradual_acl: 1, acl per: 0x48
<6>[ 129.117428] [4: recovery: 627] [SDE] ss_brightness_dcs : level : 0 candela : 2CD hbm : 0 (0) itp : FLASH
<6>[ 129.123876] [2:crtc_commit:117: 441] [SDE] ss_panel_off_pre : +
<6>[ 129.124479] [2:crtc_commit:117: 441] [SDE] ss_panel_data_read : [232]samsung,ldi_debug0_rx_cmds_revA, addr: 0xa, off: 0, len: 1, buf: 9f
<6>[ 129.125097] [2:crtc_commit:117: 441] [SDE] ss_panel_data_read : [235]samsung,ldi_debug3_rx_cmds_revA, addr: 0xe, off: 0, len: 1, buf: 80
<6>[ 129.126015] [2:crtc_commit:117: 441] [SDE] ss_panel_data_read : [234]samsung,ldi_debug2_rx_cmds_revA, addr: 0xee, off: 0, len: 1, buf: 00
<6>[ 129.126927] [2:crtc_commit:117: 441] [SDE] ss_panel_data_read : [236]samsung,ldi_debug4_rx_cmds_revA, addr: 0x5, off: 0, len: 1, buf: 00
<6>[ 129.127067] [2:crtc_commit:117: 441] [SDE] ss_read_pps_data : nothing to do
<6>[ 129.127167] [2:crtc_commit:117: 441] [SDE] ss_panel_off_pre : panel dbg: 9f 80 0 0
<6>[ 129.127293] [2:crtc_commit:117: 441] [SDE] ss_panel_off_pre : -
<3>[ 129.127866] [2:crtc_commit:117: 441] msm-dsi-display:[dsi_display_disable] ++
<3>[ 129.127974] [2:crtc_commit:117: 441] msm-dsi-panel:[dsi_panel_disable:4443] ++
<6>[ 129.308799] [2:crtc_commit:117: 441] [SDE] ss_panel_off_post : +
<6>[ 129.308894] [2:crtc_commit:117: 441] [SDE] ss_panel_off_post : -
<3>[ 129.308982] [2:crtc_commit:117: 441] msm-dsi-panel:[dsi_panel_disable:4470] --
<3>[ 129.309076] [2:crtc_commit:117: 441] msm-dsi-display:[dsi_display_disable] --
<3>[ 129.309169] [2:crtc_commit:117: 441] msm-dsi-display:[dsi_display_unprepare] ++
<6>[ 129.313162] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 3 4 1 0 0 0 1
<6>[ 129.313317] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 3 1 2 0 2 0 0
<3>[ 129.321332] [2:crtc_commit:117: 441] msm-dsi-display:[dsi_display_unprepare] --
<6>[ 131.537766] I[0: swapper/0: 0] [sec_input] PMIC input: code=116, sts=0x1
<0>[ 131.537921] I[0: swapper/0: 0] sec_debug:sec_debug_set_upload_cause() 85
<6>[ 131.695940] I[0: swapper/0: 0] [sec_input] PMIC input: code=116, sts=0x0
<0>[ 131.696002] I[0: swapper/0: 0] sec_debug:sec_debug_set_upload_cause() cafebabe
<3>[ 131.698388] [3:crtc_commit:117: 441] msm-dsi-display:[dsi_display_prepare] ++
<6>[ 131.721488] [2:crtc_commit:117: 441] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 587 registered
<3>[ 131.728301] [2:crtc_commit:117: 441] msm-dsi-display:[dsi_display_prepare] --
<3>[ 131.728358] [2:crtc_commit:117: 441] msm-dsi-display:[dsi_display_enable] ++
<3>[ 131.728410] [2:crtc_commit:117: 441] msm-dsi-panel:[dsi_panel_enable:4345] ++
<6>[ 131.728463] [2:crtc_commit:117: 441] [SDE] ss_panel_on_pre : + ndx 0
<6>[ 131.728513] [2:crtc_commit:117: 441] [SDE] samsung_panel_on_pre : +: ndx=0
<6>[ 131.728564] [2:crtc_commit:117: 441] [SDE] ss_panel_attach_set : panel_attach_status : 1
<3>[ 131.728622] [2:crtc_commit:117: 441] [SDE] samsung_panel_on_pre : DSI0 no poc_rx_cmds cmd
<6>[ 131.728677] [2:crtc_commit:117: 441] [SDE] samsung_panel_on_pre : -: ndx=0
<6>[ 131.728725] [2:crtc_commit:117: 441] [SDE] ss_panel_on_pre : -
<6>[ 131.739958] [2:crtc_commit:117: 441] [SDE] ss_panel_on_post : + ndx 0
<3>[ 131.740010] [2:crtc_commit:117: 441] [SDE] self_mask_img_write : ++
<3>[ 131.741052] [2:crtc_commit:117: 441] [SDE] self_mask_img_write : --
<3>[ 131.741102] [2:crtc_commit:117: 441] [SDE] self_mask_on : ++ (1)
<3>[ 131.741247] [2:crtc_commit:117: 441] [SDE] self_mask_on : --
<6>[ 131.741296] [2:crtc_commit:117: 441] [SDE] set_normal_br_values : pac_cd_idx (0) cd_idx (0) cd (2) interpolation_cd (2)
<6>[ 131.741369] [2:crtc_commit:117: 441] [SDE] ss_acl_on : gradual_acl: 1, acl per: 0x48
<6>[ 131.741880] [2:crtc_commit:117: 441] [SDE] ss_brightness_dcs : level : 0 candela : 2CD hbm : 0 (0) itp : FLASH
<3>[ 131.741958] [2:crtc_commit:117: 441] [SDE_mdnie] hbm: 0 bypass: 0 accessibility: 0 app: 0 mode: 4 hdr: 0 night_mode: 0 whiteRGB: (0 0 0) color_lens: (0 0 0)
<6>[ 131.742311] [2:crtc_commit:117: 441] [SDE] esd_irq_enable : clear esd irq pending status
<6>[ 131.742495] [2:crtc_commit:117: 441] [SDE] ss_panel_on_post : -
<3>[ 131.742541] [2:crtc_commit:117: 441] msm-dsi-panel:[dsi_panel_enable:4361] --
<3>[ 131.753011] [2:crtc_commit:117: 441] msm-dsi-display:[dsi_display_enable] --
<6>[ 131.753067] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 3 2 2 0 0 0 0
<6>[ 131.753911] [0: recovery: 627] [SDE] set_normal_br_values : pac_cd_idx (431) cd_idx (16) cd (18) interpolation_cd (18)
<6>[ 131.753989] [0: recovery: 627] [SDE] ss_acl_on : gradual_acl: 1, acl per: 0x48
<6>[ 131.754366] [0: recovery: 627] [SDE] ss_brightness_dcs : level : 5475 candela : 18CD hbm : 0 (0) itp : FLASH
<6>[ 131.760188] [1: kworker/1:1: 74] tsens[1:430][2:423][3:426][4:426][7:430][8:426][9:426][10:426][5:433][6:436][11:406][12:410]
<6>[ 131.890638] [3:crtc_commit:117: 441] [SDE] ss_event_frame_update : DISPLAY_ON
<6>[ 132.030102] [0: kworker/0:1: 73] cpufreq_limit_get: touch min same values(1132800,0) entered. just return.
<6>[ 133.504758] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.50 z:30 major:8 minor:8 p:C.C tc:1 type:0 noise:0,0
<6>[ 133.648258] [3: kworker/u16:6: 324] [SDE] ss_copr_read : ACTUAL_DISPLAY_ON
<14>[ 134.030151] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 134.030622] [5: init: 1] init: property_set("ro.boottime.qseecomd", "134030392551") failed: property already set
<11>[ 134.031268] [2: init: 718] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 134.031678] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 718) process group...
<14>[ 134.031766] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 718 in 0ms
<6>[ 134.162923] [0: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:e.C dd:3301,-7 mc:77 tc:0 f:5 p:0 noise:0
<6>[ 134.241242] [0: kworker/u16:6: 324] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<6>[ 134.258089] [4: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 134.258208] [0: kworker/u16:2: 304] [VIB]: set_vibrator, value[1]
<6>[ 134.258347] [0: kworker/u16:2: 304] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 134.259243] [0: kworker/u16:2: 304] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 134.259343] [0: kworker/u16:2: 304] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 134.339388] [0: kworker/u16:2: 304] [VIB]: set_vibrator, value[0]
<6>[ 134.339565] [0: kworker/u16:2: 304] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 134.340308] [0: kworker/u16:2: 304] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 134.340404] [0: kworker/u16:2: 304] [VIB]: set_vibrator, vibrator control finish value[0]
<3>[ 134.880301] [2: msm_watchdog: 77] [pet_watchdog] last_count : 4cca2, new_count : 4cca2, bark_time : 57fdf, bite_time : 6ffd6
<6>[ 136.163452] [4: kworker/4:0: 43] muic-max77705:max77705_muic_print_reg_log USBC1:0x0f, USBC2:0x05, BC:0x00, UICINTM:0x4, attached_dev:0
<6>[ 136.163537] [4: kworker/4:0: 43] muic-max77705:max77705_muic_print_reg_log CC_STATUS0:0x0, CC_STATUS1:0x0, PD_STATUS0:0x0, PD_STATUS1:0x7, WDT:0, POR:0
<6>[ 136.800452] [1: kworker/1:1: 74] tsens[1:430][2:430][3:430][4:430][7:433][8:430][9:433][10:433][5:433][6:436][11:410][12:420]
<14>[ 139.030445] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 139.030922] [5: init: 1] init: property_set("ro.boottime.qseecomd", "139030700466") failed: property already set
<11>[ 139.032854] [0: init: 719] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 139.033949] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 719) process group...
<14>[ 139.034038] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 719 in 0ms
<6>[ 141.840504] [1: kworker/1:1: 74] tsens[1:440][2:436][3:433][4:440][7:446][8:440][9:433][10:433][5:440][6:443][11:410][12:416]
<14>[ 144.030754] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 144.031239] [5: init: 1] init: property_set("ro.boottime.qseecomd", "144031004683") failed: property already set
<11>[ 144.033304] [0: init: 720] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 144.034402] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 720) process group...
<14>[ 144.034490] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 720 in 0ms
<3>[ 144.480533] [1: msm_watchdog: 77] [pet_watchdog] last_count : 4ccb0, new_count : 4ccb0, bark_time : 57fdf, bite_time : 6ffd6
<6>[ 145.122344] [0: kworker/u16:2: 304] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<6>[ 145.446551] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 69 1 0 0 0 0 0
<6>[ 145.840620] [0: kworker/0:1: 73] [sec_input] gpio_keys_gpio_report_event: 115, 0, 1
<6>[ 145.890126] [0: kworker/0:1: 73] [sec_input] gpio_keys_gpio_report_event: 703, 0, 1
<6>[ 146.340117] [0: kworker/0:1: 73] cpufreq_limit_get: touch min same values(1574400,0) entered. just return.
<6>[ 146.640126] [0: kworker/0:1: 73] cpufreq_limit_get: touch min same values(1574400,0) entered. just return.
<6>[ 146.880137] [1: kworker/1:1: 74] tsens[1:423][2:423][3:420][4:423][7:426][8:426][9:423][10:426][5:426][6:430][11:406][12:413]
<0>[ 148.350050] [5: kworker/5:2: 610] sec_debug:sec_debug_set_upload_cause() cafebabe
<6>[ 148.350104] [5: kworker/5:2: 610] [sec_input] gpio_keys_gpio_report_event: 703, 0, 0
<0>[ 148.370048] [5: kworker/5:2: 610] sec_debug:sec_debug_set_upload_cause() cafebabe
<6>[ 148.370099] [5: kworker/5:2: 610] [sec_input] gpio_keys_gpio_report_event: 115, 0, 0
<6>[ 148.448344] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] sec_ts_read_event: STATUS 1d 69 0 0 0 0 0 0
<6>[ 148.870036] [5: kworker/5:2: 610] cpufreq_limit_get: touch min same values(1574400,0) entered. just return.
<14>[ 149.031035] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 149.031328] [5: init: 1] init: property_set("ro.boottime.qseecomd", "149031182441") failed: property already set
<11>[ 149.031844] [0: init: 721] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 149.032216] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 721) process group...
<14>[ 149.032294] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 721 in 0ms
<6>[ 151.920439] [1: kworker/1:1: 74] tsens[1:420][2:420][3:420][4:420][7:423][8:420][9:420][10:420][5:420][6:423][11:406][12:410]
<6>[ 152.708491] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.51 z:39 major:10 minor:10 p:C.N tc:1 type:0 noise:0,0
<6>[ 152.709373] [3: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 152.709532] [2: kworker/u16:0: 6] [VIB]: set_vibrator, value[1]
<6>[ 152.709828] [2: kworker/u16:0: 6] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 152.711185] [0: kworker/u16:0: 6] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 152.711253] [0: kworker/u16:0: 6] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 152.757629] [0: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.N dd:1,0 mc:1 tc:0 f:0 p:0 noise:0
<6>[ 152.791296] [0: kworker/u16:0: 6] [VIB]: set_vibrator, value[0]
<6>[ 152.791464] [0: kworker/u16:0: 6] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 152.791931] [0: kworker/u16:0: 6] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 152.792049] [0: kworker/u16:0: 6] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 153.770886] [0: kworker/u16:0: 6] max77705_fg_read_vfocv: VFOCV(3706)mV, data(0xb951)
<6>[ 153.771012] [0: kworker/u16:0: 6] max77705_fg_periodic_read: skip old(33) current(153)
<6>[ 153.771123] [0: kworker/u16:0: 6] max77705_check_jig_status ret(0)
<6>[ 153.773510] [0: kworker/u16:0: 6] max77705_fg_read_qh : QH(550000)
<6>[ 153.773613] [0: kworker/u16:0: 6] [FG power] ISYS(220mA),ISYSAVG(340mA),VSYS(4352mV),IIN(615mA),VBYP(8658mV),QH(550000uah)
<7>[ 153.774129] [0: kworker/u16:0: 6] max77705_fg_read_current: current=-228
<7>[ 153.775051] [0: kworker/u16:0: 6] max77705_fg_read_avg_current: avg_current=-282
<6>[ 153.778727] [1: kworker/u16:0: 6] sec-battery soc:battery: sec_bat_get_value_by_adc:[2] Temp(361), Temp-ADC(6139)
<6>[ 153.782969] [1: kworker/u16:0: 6] sec-battery soc:battery: sec_bat_get_value_by_adc:[3] Temp(361), Temp-ADC(6139)
<6>[ 153.786594] [0: kworker/u16:0: 6] sec-battery soc:battery: sec_bat_get_value_by_adc:[12] Temp(373), Temp-ADC(6011)
<6>[ 153.790773] [1: kworker/u16:0: 6] sec-battery soc:battery: sec_bat_get_value_by_adc:[6] Temp(385), Temp-ADC(5780)
<6>[ 153.794460] [1: kworker/u16:0: 6] sec-battery soc:battery: sec_bat_get_value_by_adc:[10] Temp(361), Temp-ADC(6139)
<7>[ 153.794860] [1: kworker/u16:0: 6] max77705_fg_write_temp: temperature to (361, 0x2419)
<7>[ 153.796992] [0: kworker/u16:0: 6] max77705_fg_read_avg_current: avg_current=-282
<7>[ 153.797203] [0: kworker/u16:0: 6] max77705_get_fuelgauge_soc: soc(175)
<6>[ 153.797317] [0: kworker/u16:0: 6] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 153.797810] [0: kworker/u16:0: 6] max77705_get_input_current_type: reg:(0x12), charging_current:(475)
<6>[ 153.798289] [0: kworker/u16:0: 6] max77705_fg_get_scaled_capacity : current_standard(1000)
<6>[ 153.798403] [0: kworker/u16:0: 6] max77705_fg_get_scaled_capacity : CABLE TYPE(1) INPUT CURRENT(475) CHARGING MODE(NONE)
<6>[ 153.798523] [0: kworker/u16:0: 6] capacity_max (1000) scaled capacity(17.5), raw_soc(17.5)
<7>[ 153.798627] [0: kworker/u16:0: 6] max77705_fg_get_atomic_capacity : NOW(17), OLD(17)
<6>[ 153.798750] [0: kworker/u16:0: 6] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(3663mV),Inow(-228mA),Imax(475mA),Ichg(550mA),SOC(17%),Tbat(361),Tusb(373),Tchg(385),Twpc(361)
<6>[ 153.799314] [0: kworker/u16:0: 6] sec_bat_swelling_check: swelling highblock(410), highrecov(390)
<7>[ 153.799793] [0: kworker/u16:0: 6] max77705_get_float_voltage: battery cv reg : 0x13, float voltage val : 4350
<6>[ 153.799917] [0: kworker/u16:0: 6] sec_bat_swelling_check: status(2), swell_mode(0:1:0), cv(4350)mV, temp(361)
<6>[ 153.800197] [0: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x40), after(0x40)
<6>[ 153.800362] [0: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x40), after(0x40)
<6>[ 153.807567] [0: kworker/u16:0: 6] max77705 : [0xb1]0x1e, [0xb2]0x9f, [0xb3]0x80, [0xb4]0x78, [0xb5]0x00, [0xb6]0xff, [0xb7]0x14, [0xb8]0x38, [0xb9]0x4b, [0xba]0x9d, [0xbb]0x13, [0xbc]0x3c, [0xbd]0x6d, [0xbe]0x34, [0xbf]0x02, [0xc0]0x92, [0xc1]0x10, [0xc2]0x00, [0xc3]0x60,
<6>[ 153.808512] [0: kworker/u16:0: 6] max77705_chg_monitor_work: [CHG] MODE(0x4), B2SOVRC(0xc), otg_on(0)
<6>[ 153.808657] [0: kworker/u16:0: 6] sec-battery soc:battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(NONE, NONE, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(NONE, 0), sleep_mode(0), Cycle(-1)
<6>[ 153.809188] [0: kworker/0:1: 73] sec_bat_get_property cable type = 1 sleep_mode = 0
<6>[ 153.809556] [0: kworker/u16:0: 6] sec-battery soc:battery: sec_bat_set_polling: Polling time 30/30 sec.
<6>[ 153.951373] [0: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.52 z:39 major:10 minor:10 p:C.N tc:1 type:0 noise:0,0
<6>[ 153.951739] [4: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 153.951950] [1: kworker/u16:0: 6] [VIB]: set_vibrator, value[1]
<6>[ 153.952022] [1: kworker/u16:0: 6] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 153.952772] [0: kworker/u16:0: 6] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 153.952869] [0: kworker/u16:0: 6] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 154.017861] [0: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.N dd:6,-2 mc:4 tc:0 f:2 p:0 noise:0
<14>[ 154.031233] [5: init: 1] init: starting service 'qseecomd'...
<11>[ 154.031653] [5: init: 1] init: property_set("ro.boottime.qseecomd", "154031462022") failed: property already set
<11>[ 154.032183] [0: init: 722] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 154.032623] [5: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 722) process group...
<14>[ 154.032731] [5: init: 1] init: Successfully killed process cgroup uid 0 pid 722 in 0ms
<6>[ 154.032909] [1: kworker/u16:0: 6] [VIB]: set_vibrator, value[0]
<6>[ 154.033071] [1: kworker/u16:0: 6] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 154.033553] [0: kworker/u16:0: 6] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 154.033697] [0: kworker/u16:0: 6] [VIB]: set_vibrator, vibrator control finish value[0]
<3>[ 154.080245] [1: msm_watchdog: 77] [pet_watchdog] last_count : 4cc9f, new_count : 4cc9f, bark_time : 57fdf, bite_time : 6ffd6
<6>[ 154.903843] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.53 z:40 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 154.904255] [4: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 154.904422] [2: kworker/u16:0: 6] [VIB]: set_vibrator, value[1]
<6>[ 154.904496] [2: kworker/u16:0: 6] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 154.905359] [1: kworker/u16:0: 6] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 154.905423] [1: kworker/u16:0: 6] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 154.952624] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:7,3 mc:2 tc:0 f:1 p:0 noise:0
<6>[ 154.985480] [1: kworker/u16:0: 6] [VIB]: set_vibrator, value[0]
<6>[ 154.985650] [1: kworker/u16:0: 6] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 154.986145] [0: kworker/u16:0: 6] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 154.986299] [0: kworker/u16:0: 6] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 155.805183] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.54 z:24 major:6 minor:6 p:C.N tc:1 type:0 noise:0,0
<6>[ 155.805682] [5: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 155.805803] [2: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 155.805879] [2: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 155.806951] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 155.807017] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 155.854131] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.N dd:0,0 mc:1 tc:0 f:1 p:0 noise:0
<6>[ 155.887058] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 155.887218] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 155.887694] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 155.887811] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 156.001269] [0: kworker/u16:6: 324] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<6>[ 156.001381] [0: kworker/0:1: 73] sec_ts 30-0048: [sec_input] mode:0202 noise:0 iq:1 lp:(40/-1) D0F000 // v:0313 cal:A2(00)C01T0307.LCIA.L F0201 // sp:0 e:1 id(0,0) // #6 1
<6>[ 156.439496] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.55 z:37 major:9 minor:9 p:C.C tc:1 type:0 noise:0,0
<6>[ 156.439940] [4: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 156.440386] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 156.440469] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 156.441535] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 156.441599] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 156.488414] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:-3,-1 mc:3 tc:0 f:0 p:0 noise:0
<6>[ 156.521660] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 156.521827] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 156.522296] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 156.522411] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 156.960268] [1: kworker/1:1: 74] tsens[1:469][2:456][3:466][4:502][7:479][8:579][9:479][10:473][5:479][6:486][11:410][12:423]
<6>[ 157.457817] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.56 z:31 major:8 minor:8 p:C.C tc:1 type:0 noise:0,0
<6>[ 157.458322] [5: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 157.458445] [2: kworker/u16:0: 6] [VIB]: set_vibrator, value[1]
<6>[ 157.458523] [2: kworker/u16:0: 6] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 157.459329] [2: kworker/u16:0: 6] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 157.459396] [2: kworker/u16:0: 6] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 157.498371] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:4,-3 mc:3 tc:0 f:0 p:0 noise:0
<6>[ 157.539461] [2: kworker/u16:0: 6] [VIB]: set_vibrator, value[0]
<6>[ 157.539619] [2: kworker/u16:0: 6] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 157.540135] [0: kworker/u16:0: 6] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 157.540262] [0: kworker/u16:0: 6] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 158.100526] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.57 z:39 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 158.174488] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:8,0 mc:5 tc:0 f:1 p:0 noise:0
<6>[ 158.264527] [5: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 158.264827] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 158.264871] [2: mmcqd/0: 386] mmc0: clock 50000000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 158.265406] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 158.266311] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 158.266376] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 158.346445] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 158.346610] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 158.347074] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 158.347195] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 158.480099] [2: kworker/2:0: 27] mmc0: clock 0Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 158.743303] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.58 z:30 major:7 minor:7 p:C.C tc:1 type:0 noise:0,0
<6>[ 158.743596] [5: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 158.743837] [1: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 158.743907] [1: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 158.744690] [1: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 158.744754] [1: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 158.800521] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:1,1 mc:2 tc:0 f:-1 p:0 noise:0
<6>[ 158.824812] [1: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 158.824975] [1: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 158.825445] [1: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 158.825563] [1: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<14>[ 159.031524] [6: init: 1] init: starting service 'qseecomd'...
<11>[ 159.032022] [6: init: 1] init: property_set("ro.boottime.qseecomd", "159031782437") failed: property already set
<11>[ 159.032666] [0: init: 723] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 159.033115] [6: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 723) process group...
<14>[ 159.033208] [6: init: 1] init: Successfully killed process cgroup uid 0 pid 723 in 0ms
<6>[ 159.753304] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.59 z:43 major:11 minor:11 p:C.C tc:1 type:0 noise:0,0
<6>[ 159.810547] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:2,0 mc:2 tc:0 f:0 p:0 noise:0
<6>[ 160.102806] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.60 z:38 major:10 minor:10 p:C.C tc:1 type:0 noise:0,0
<6>[ 160.152738] [1: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:10,3 mc:4 tc:0 f:1 p:0 noise:0
<6>[ 160.154943] [0: mmcqd/0: 386] mmc0: clock 50000000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 160.160841] [4: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 160.160931] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 160.161004] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 160.161786] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 160.161864] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 160.241914] [0: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 160.242086] [0: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 160.242558] [0: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 160.242675] [0: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 160.360090] [2: kworker/2:0: 27] mmc0: clock 0Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 161.088765] [1: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.61 z:36 major:9 minor:9 p:C.C tc:1 type:0 noise:0,0
<6>[ 161.613520] [0: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:e.C dd:3354,-82 mc:60 tc:0 f:0 p:0 noise:0
<6>[ 161.645184] [4: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 161.645311] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[1]
<6>[ 161.645390] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 161.646169] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 161.646245] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 161.726315] [3: kworker/u16:6: 324] [VIB]: set_vibrator, value[0]
<6>[ 161.726479] [3: kworker/u16:6: 324] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 161.726950] [3: kworker/u16:6: 324] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 161.727095] [3: kworker/u16:6: 324] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 162.000266] [1: kworker/1:1: 74] tsens[1:489][2:479][3:486][4:526][7:499][8:608][9:496][10:486][5:509][6:516][11:423][12:436]
<6>[ 162.149188] [2: mmcqd/0: 386] mmc0: clock 50000000Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<3>[ 163.680296] [3: msm_watchdog: 77] [pet_watchdog] last_count : 4cca9, new_count : 4cca9, bark_time : 57fdf, bite_time : 6ffd6
<14>[ 164.031843] [4: init: 1] init: starting service 'qseecomd'...
<11>[ 164.032362] [4: init: 1] init: property_set("ro.boottime.qseecomd", "164032106342") failed: property already set
<11>[ 164.034298] [0: init: 725] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 164.035297] [4: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 725) process group...
<14>[ 164.035389] [4: init: 1] init: Successfully killed process cgroup uid 0 pid 725 in 0ms
<6>[ 166.020339] [2: kworker/2:0: 27] mmc0: clock 0Hz busmode 1 powermode 2 cs 0 Vdd 18 width 4 timing 2
<6>[ 166.534022] [2: recovery: 724] EXT4-fs (sda22): mounted filesystem without journal. Opts:
<6>[ 166.552121] [0: recovery: 724] EXT4-fs (sda22): mounted filesystem without journal. Opts:
<6>[ 167.040285] [1: kworker/1:1: 74] tsens[1:595][2:532][3:532][4:575][7:678][8:665][9:532][10:526][5:565][6:592][11:440][12:456]
<6>[ 167.325684] [4: recovery: 724] FAT-fs (sda17[259:1]): trying to mount...
<6>[ 167.326711] [4: recovery: 724] FAT-fs (sda17[259:1]): mounted successfully!
<6>[ 167.327365] [6: recovery: 724] FAT-fs (sda17[259:1]): trying to unmount...
<6>[ 167.327413] [6: recovery: 724] FAT-fs (sda17[259:1]): unmounted successfully!
<4>[ 167.335119] [6: recovery: 724] EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended
<6>[ 167.359990] [6: recovery: 724] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:
<4>[ 167.370110] [6: recovery: 724] EXT4-fs (sda24): warning: maximal mount count reached, running e2fsck is recommended
<6>[ 167.371072] [6: recovery: 724] EXT4-fs (sda24): mounted filesystem without journal. Opts:
<4>[ 167.380768] [6: recovery: 724] EXT4-fs (sda5): warning: checktime reached, running e2fsck is recommended
<6>[ 167.381317] [6: recovery: 724] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
<6>[ 167.394269] [6: recovery: 724] EXT4-fs (sda23): mounted filesystem without journal. Opts:
<6>[ 167.522204] [0: kworker/u16:0: 6] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown
<14>[ 169.032172] [6: init: 1] init: starting service 'qseecomd'...
<11>[ 169.032786] [6: init: 1] init: property_set("ro.boottime.qseecomd", "169032473527") failed: property already set
<11>[ 169.034813] [0: init: 736] init: cannot execve('/sbin/qseecomd'): No such file or directory
<14>[ 169.035875] [6: init: 1] init: Sending signal 9 to service 'qseecomd' (pid 736) process group...
<14>[ 169.035967] [6: init: 1] init: Successfully killed process cgroup uid 0 pid 736 in 0ms
<6>[ 170.029601] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [P] tID:0.62 z:35 major:9 minor:9 p:C.C tc:1 type:0 noise:0,0
<6>[ 170.038235] [5: recovery: 627] [VIB]: ON, Duration : 80 msec, intensity : 10000, freq : 0 strength : 98 od : 0
<6>[ 170.038331] [3: kworker/u16:2: 304] [VIB]: set_vibrator, value[1]
<6>[ 170.038417] [3: kworker/u16:2: 304] [FACTORY] setSensorCallback: state = 0, duration = 80
<6>[ 170.039253] [0: kworker/u16:2: 304] boost_power_on, request[MOTOR][ON] motor[1], hrm[0]
<6>[ 170.039318] [0: kworker/u16:2: 304] [VIB]: set_vibrator, vibrator control finish value[1]
<6>[ 170.053362] [3: irq/351-sec_ts: 311] sec_ts 30-0048: [sec_input] [R] tID:0 p:C.C dd:2,1 mc:1 tc:0 f:1 p:0 noise:0
<6>[ 170.119362] [0: kworker/u16:2: 304] [VIB]: set_vibrator, value[0]
<6>[ 170.119531] [0: kworker/u16:2: 304] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
<6>[ 170.119992] [0: kworker/u16:2: 304] [FACTORY] setSensorCallback: state = 1, duration = 80
<6>[ 170.120484] [0: kworker/u16:2: 304] [VIB]: set_vibrator, vibrator control finish value[0]
<6>[ 170.157536] [4: recovery: 627] EXT4-fs (sda22): mounted filesystem without journal. Opts:
<14>[ 170.259929] [4: init: 1] init: Clear action queue and start shutdown trigger
<14>[ 170.260142] [4: init: 1] init: processing action (shutdown_done) from (<Builtin Action>:0)
<14>[ 170.260226] [4: init: 1] init: Reboot start, reason: reboot,, rebootTarget:
Editor is loading...