Untitled

 avatar
unknown
plain_text
a year ago
46 kB
38
No Index
=================================================================================================================================================================================================
=================================================================================================================================================================================================
=================================================================================================================================================================================================
root@NAS[~]# smartctl -a /dev/sdc
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.29-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     TOSHIBA THNSF81Q92CSE
Serial Number:    274S105HTELT
LU WWN Device Id: 5 00080d 9109e7ae5
Firmware Version: 8ENP7101
User Capacity:    1,920,383,410,176 bytes [1.92 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database 7.3/5528
ATA Version is:   ACS-3 (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Jun  7 17:55:58 2024 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  120) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  67) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000a   100   100   000    Old_age   Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   100   100   050    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0013   100   100   050    Pre-fail  Always       -       0
  7 Unknown_SSD_Attribute   0x000b   100   100   050    Pre-fail  Always       -       0
  8 Unknown_SSD_Attribute   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       9002
 10 Unknown_SSD_Attribute   0x0013   100   100   050    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -       1865
167 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       0
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       1
169 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       100
170 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       0
173 Unknown_Attribute       0x0012   200   200   000    Old_age   Always       -       502944
174 Unknown_Attribute       0x0012   200   200   000    Old_age   Always       -       578168
175 Program_Fail_Count_Chip 0x0013   100   100   010    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       689
194 Temperature_Celsius     0x0022   063   023   000    Old_age   Always       -       37 (Min/Max 7/77)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
232 Available_Reservd_Space 0x0022   100   100   000    Old_age   Always       -       0
240 Unknown_SSD_Attribute   0x0013   100   100   050    Pre-fail  Always       -       0
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       1525890
242 Total_LBAs_Read         0x0012   100   100   000    Old_age   Always       -       3418259
243 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       11
249 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       49546

SMART Error Log Version: 1
ATA Error Count: 1
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 1984 hours (82 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 80 bd 7e 40  Error: ICRC, ABRT at LBA = 0x007ebd80 = 8306048

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 80 00 80 bd 7e 40 00      01:13:27.651  READ FPDMA QUEUED
  60 80 00 00 bd 7e 40 00      01:13:27.650  READ FPDMA QUEUED
  60 80 00 80 bc 7e 40 00      01:13:27.650  READ FPDMA QUEUED
  60 80 00 00 bc 7e 40 00      01:13:27.649  READ FPDMA QUEUED
  61 80 00 80 bb 7e 40 00      01:13:27.649  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      8846         -
# 2  Short offline       Completed without error       00%      8678         -
# 3  Short offline       Completed without error       00%      8516         -
# 4  Short offline       Completed without error       00%      8348         -
# 5  Short offline       Completed without error       00%      8180         -
# 6  Short offline       Completed without error       00%      8012         -
# 7  Short offline       Completed without error       00%      7844         -
# 8  Short offline       Completed without error       00%      7676         -
# 9  Short offline       Completed without error       00%      7508         -
#10  Short offline       Completed without error       00%      7340         -
#11  Short offline       Completed without error       00%      7172         -
#12  Short offline       Completed without error       00%      7004         -
#13  Short offline       Completed without error       00%      6837         -
#14  Short offline       Completed without error       00%      6672         -
#15  Short offline       Completed without error       00%      6504         -
#16  Short offline       Completed without error       00%      6370         -
#17  Short offline       Completed without error       00%      6231         -
#18  Short offline       Completed without error       00%      6063         -
#19  Short offline       Completed without error       00%      5895         -
#20  Short offline       Completed without error       00%      5727         -
#21  Short offline       Completed without error       00%      5559         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more
=================================================================================================================================================================================================
=================================================================================================================================================================================================
=================================================================================================================================================================================================
root@NAS[~]# smartctl -a /dev/sdd
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.29-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     TOSHIBA THNSF81Q92CSE
Serial Number:    17FS1051TELT
LU WWN Device Id: 5 00080d 9109847ee
Firmware Version: 8ENP7101
User Capacity:    1,920,383,410,176 bytes [1.92 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database 7.3/5528
ATA Version is:   ACS-3 (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Jun  7 17:57:15 2024 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  120) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  67) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000a   100   100   000    Old_age   Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   100   100   050    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0013   100   100   050    Pre-fail  Always       -       0
  7 Unknown_SSD_Attribute   0x000b   100   100   050    Pre-fail  Always       -       0
  8 Unknown_SSD_Attribute   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       9712
 10 Unknown_SSD_Attribute   0x0013   100   100   050    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -       1153
167 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       0
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       1
169 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       100
170 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       0
173 Unknown_Attribute       0x0012   200   200   000    Old_age   Always       -       418551
174 Unknown_Attribute       0x0012   200   200   000    Old_age   Always       -       351030
175 Program_Fail_Count_Chip 0x0013   100   100   010    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       561
194 Temperature_Celsius     0x0022   065   049   000    Old_age   Always       -       35 (Min/Max 7/51)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
232 Available_Reservd_Space 0x0022   100   100   000    Old_age   Always       -       0
240 Unknown_SSD_Attribute   0x0013   100   100   050    Pre-fail  Always       -       0
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       1208521
242 Total_LBAs_Read         0x0012   100   100   000    Old_age   Always       -       2388496
243 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       11
249 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       41249

SMART Error Log Version: 1
ATA Error Count: 1
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 108 hours (4 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 58 9c 05 21 40  Error: ICRC, ABRT at LBA = 0x0021059c = 2164124

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 98 c4 0d 21 40 00      00:07:45.488  READ FPDMA QUEUED
  60 00 90 bf 0c 21 40 00      00:07:45.488  READ FPDMA QUEUED
  60 00 88 ba 0b 21 40 00      00:07:45.488  READ FPDMA QUEUED
  60 00 80 b5 0a 21 40 00      00:07:45.488  READ FPDMA QUEUED
  60 00 78 b0 09 21 40 00      00:07:45.488  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      9555         -
# 2  Short offline       Completed without error       00%      9387         -
# 3  Short offline       Completed without error       00%      9225         -
# 4  Short offline       Completed without error       00%      9057         -
# 5  Short offline       Completed without error       00%      8889         -
# 6  Short offline       Completed without error       00%      8721         -
# 7  Short offline       Completed without error       00%      8553         -
# 8  Short offline       Completed without error       00%      8385         -
# 9  Short offline       Completed without error       00%      8217         -
#10  Short offline       Completed without error       00%      8049         -
#11  Short offline       Completed without error       00%      7881         -
#12  Short offline       Completed without error       00%      7713         -
#13  Short offline       Completed without error       00%      7546         -
#14  Short offline       Completed without error       00%      7381         -
#15  Short offline       Completed without error       00%      7213         -
#16  Short offline       Completed without error       00%      7079         -
#17  Short offline       Completed without error       00%      6941         -
#18  Short offline       Completed without error       00%      6773         -
#19  Short offline       Completed without error       00%      6604         -
#20  Short offline       Completed without error       00%      6436         -
#21  Short offline       Completed without error       00%      6268         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more
=================================================================================================================================================================================================
=================================================================================================================================================================================================
=================================================================================================================================================================================================
root@NAS[~]# smartctl -a /dev/sdt
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.29-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     TOSHIBA THNSF81Q92CSE
Serial Number:    17FS104PTELT
LU WWN Device Id: 5 00080d 9109847df
Firmware Version: 8ENP7101
User Capacity:    1,920,383,410,176 bytes [1.92 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database 7.3/5528
ATA Version is:   ACS-3 (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Jun  7 17:58:03 2024 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  120) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  67) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000a   100   100   000    Old_age   Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   100   100   050    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0013   100   100   050    Pre-fail  Always       -       0
  7 Unknown_SSD_Attribute   0x000b   100   100   050    Pre-fail  Always       -       0
  8 Unknown_SSD_Attribute   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       5720
 10 Unknown_SSD_Attribute   0x0013   100   100   050    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -       22
167 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       0
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       0
169 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       100
170 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       0
173 Unknown_Attribute       0x0012   200   200   000    Old_age   Always       -       57384
174 Unknown_Attribute       0x0012   200   200   000    Old_age   Always       -       20648
175 Program_Fail_Count_Chip 0x0013   100   100   010    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       19
194 Temperature_Celsius     0x0022   061   039   000    Old_age   Always       -       39 (Min/Max 19/61)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
232 Available_Reservd_Space 0x0022   100   100   000    Old_age   Always       -       0
240 Unknown_SSD_Attribute   0x0013   100   100   050    Pre-fail  Always       -       0
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       179180
242 Total_LBAs_Read         0x0012   100   100   000    Old_age   Always       -       12051
243 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       11
249 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       5655

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      5563         -
# 2  Short offline       Completed without error       00%      5395         -
# 3  Short offline       Completed without error       00%      5233         -
# 4  Short offline       Completed without error       00%      5065         -
# 5  Short offline       Completed without error       00%      4897         -
# 6  Short offline       Completed without error       00%      4729         -
# 7  Short offline       Completed without error       00%      4561         -
# 8  Short offline       Completed without error       00%      4393         -
# 9  Short offline       Completed without error       00%      4225         -
#10  Short offline       Completed without error       00%      4057         -
#11  Short offline       Completed without error       00%      3889         -
#12  Short offline       Completed without error       00%      3721         -
#13  Short offline       Completed without error       00%      3554         -
#14  Short offline       Completed without error       00%      3389         -
#15  Short offline       Completed without error       00%      3221         -
#16  Short offline       Completed without error       00%      3088         -
#17  Short offline       Completed without error       00%      2949         -
#18  Short offline       Completed without error       00%      2781         -
#19  Short offline       Completed without error       00%      2613         -
#20  Short offline       Completed without error       00%      2445         -
#21  Short offline       Completed without error       00%      2277         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more
=================================================================================================================================================================================================
=================================================================================================================================================================================================
=================================================================================================================================================================================================
root@NAS[~]# smartctl -a /dev/sdu
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.29-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     TOSHIBA THNSF81Q92CSE
Serial Number:    274S1084TELT
LU WWN Device Id: 5 00080d 9109e7811
Firmware Version: 8ENP7101
User Capacity:    1,920,383,410,176 bytes [1.92 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database 7.3/5528
ATA Version is:   ACS-3 (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Jun  7 17:58:53 2024 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  120) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  67) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000a   100   100   000    Old_age   Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   100   100   050    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0013   100   100   050    Pre-fail  Always       -       0
  7 Unknown_SSD_Attribute   0x000b   100   100   050    Pre-fail  Always       -       0
  8 Unknown_SSD_Attribute   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       9262
 10 Unknown_SSD_Attribute   0x0013   100   100   050    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -       500
167 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       0
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       0
169 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       100
170 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       0
173 Unknown_Attribute       0x0012   200   200   000    Old_age   Always       -       479324
174 Unknown_Attribute       0x0012   200   200   000    Old_age   Always       -       206488
175 Program_Fail_Count_Chip 0x0013   100   100   010    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       348
194 Temperature_Celsius     0x0022   063   047   000    Old_age   Always       -       37 (Min/Max 16/53)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
232 Available_Reservd_Space 0x0022   100   100   000    Old_age   Always       -       0
240 Unknown_SSD_Attribute   0x0013   100   100   050    Pre-fail  Always       -       0
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       1323292
242 Total_LBAs_Read         0x0012   100   100   000    Old_age   Always       -       2482262
243 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       30
249 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       47103

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      9105         -
# 2  Short offline       Completed without error       00%      8937         -
# 3  Short offline       Completed without error       00%      8775         -
# 4  Short offline       Completed without error       00%      8607         -
# 5  Short offline       Completed without error       00%      8439         -
# 6  Short offline       Completed without error       00%      8271         -
# 7  Short offline       Completed without error       00%      8103         -
# 8  Short offline       Completed without error       00%      7935         -
# 9  Short offline       Completed without error       00%      7767         -
#10  Short offline       Completed without error       00%      7599         -
#11  Short offline       Completed without error       00%      7431         -
#12  Short offline       Completed without error       00%      7263         -
#13  Short offline       Completed without error       00%      7096         -
#14  Short offline       Completed without error       00%      6931         -
#15  Short offline       Completed without error       00%      6763         -
#16  Short offline       Completed without error       00%      6629         -
#17  Short offline       Completed without error       00%      6490         -
#18  Short offline       Completed without error       00%      6322         -
#19  Short offline       Completed without error       00%      6154         -
#20  Short offline       Completed without error       00%      5986         -
#21  Short offline       Completed without error       00%      5818         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more
=================================================================================================================================================================================================
=================================================================================================================================================================================================
=================================================================================================================================================================================================
root@NAS[~]# smartctl -a /dev/sdv
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.29-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     TOSHIBA THNSF81Q92CSE
Serial Number:    17HS10CTTELT
LU WWN Device Id: 5 00080d 910981d45
Firmware Version: 8ENP7101
User Capacity:    1,920,383,410,176 bytes [1.92 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database 7.3/5528
ATA Version is:   ACS-3 (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Jun  7 17:59:10 2024 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  120) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  67) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000a   100   100   000    Old_age   Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   100   100   050    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0013   100   100   050    Pre-fail  Always       -       0
  7 Unknown_SSD_Attribute   0x000b   100   100   050    Pre-fail  Always       -       0
  8 Unknown_SSD_Attribute   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       6844
 10 Unknown_SSD_Attribute   0x0013   100   100   050    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -       798
167 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       0
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       0
169 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       100
170 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       0
173 Unknown_Attribute       0x0012   200   200   000    Old_age   Always       -       744484
174 Unknown_Attribute       0x0012   200   200   000    Old_age   Always       -       351030
175 Program_Fail_Count_Chip 0x0013   100   100   010    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       168
194 Temperature_Celsius     0x0022   061   022   000    Old_age   Always       -       39 (Min/Max 7/78)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
232 Available_Reservd_Space 0x0022   100   100   000    Old_age   Always       -       0
240 Unknown_SSD_Attribute   0x0013   100   100   050    Pre-fail  Always       -       0
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       2192665
242 Total_LBAs_Read         0x0012   100   100   000    Old_age   Always       -       2600641
243 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       11
249 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       73342

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      6687         -
# 2  Short offline       Completed without error       00%      6520         -
# 3  Short offline       Completed without error       00%      6358         -
# 4  Short offline       Completed without error       00%      6190         -
# 5  Short offline       Completed without error       00%      6022         -
# 6  Short offline       Completed without error       00%      5854         -
# 7  Short offline       Completed without error       00%      5685         -
# 8  Short offline       Completed without error       00%      5517         -
# 9  Short offline       Completed without error       00%      5349         -
#10  Short offline       Completed without error       00%      5181         -
#11  Short offline       Completed without error       00%      5013         -
#12  Short offline       Completed without error       00%      4845         -
#13  Short offline       Completed without error       00%      4678         -
#14  Short offline       Completed without error       00%      4513         -
#15  Short offline       Completed without error       00%      4345         -
#16  Short offline       Completed without error       00%      4212         -
#17  Short offline       Completed without error       00%      4073         -
#18  Short offline       Completed without error       00%      3905         -
#19  Short offline       Completed without error       00%      3737         -
#20  Short offline       Completed without error       00%      3569         -
#21  Short offline       Completed without error       00%      3401         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more
=================================================================================================================================================================================================
=================================================================================================================================================================================================
=================================================================================================================================================================================================
Editor is loading...