Untitled
unknown
plain_text
2 years ago
10 kB
10
Indexable
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-10-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F4 EG (AF)
Device Model: SAMSUNG HD204UI
Serial Number: S2H7J9BB305700
LU WWN Device Id: 5 0024e9 204abfd68
Firmware Version: 1AQ10001
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Jan 7 11:24:53 2024 CET
==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (20700) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 345) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 4155
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 083 068 025 Pre-fail Always - 5368
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 209
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 20382
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 233
181 Program_Fail_Cnt_Total 0x0022 001 001 000 Old_age Always - 4008956520
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 20
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 049 000 Old_age Always - 36 (Min/Max 15/51)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 035 035 000 Old_age Always - 34585
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 10362
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 233
SMART Error Log Version: 1
ATA Error Count: 49386 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 49386 occurred at disk power-on lifetime: 119 hours (4 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 47 01 00 e0 Error: ICRC, ABRT at LBA = 0x00000147 = 327
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 40 01 00 e0 00 00:03:49.372 WRITE DMA
ea 00 00 00 00 00 40 00 00:03:49.372 FLUSH CACHE EXT
35 00 20 18 5f 36 40 00 00:03:49.372 WRITE DMA EXT
35 00 28 18 77 70 40 00 00:03:49.372 WRITE DMA EXT
35 00 28 58 37 87 40 00 00:03:49.372 WRITE DMA EXT
Error 49385 occurred at disk power-on lifetime: 119 hours (4 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 5f 03 00 e0 Error: ICRC, ABRT at LBA = 0x0000035f = 863
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 58 03 00 e0 00 00:03:48.881 WRITE DMA
ca 00 08 58 01 00 e0 00 00:03:48.881 WRITE DMA
ea 00 00 00 00 00 40 00 00:03:48.881 FLUSH CACHE EXT
35 00 28 70 5a 36 40 00 00:03:48.881 WRITE DMA EXT
35 00 20 38 68 70 40 00 00:03:48.881 WRITE DMA EXT
Error 49384 occurred at disk power-on lifetime: 119 hours (4 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 5f 01 00 e0 Error: ICRC, ABRT at LBA = 0x0000015f = 351
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 58 01 00 e0 00 00:03:41.205 WRITE DMA
ea 00 00 00 00 00 40 00 00:03:41.205 FLUSH CACHE EXT
35 00 30 b8 21 36 40 00 00:03:41.205 WRITE DMA EXT
35 00 30 a0 bc 6f 40 00 00:03:41.205 WRITE DMA EXT
35 00 28 80 30 e6 40 00 00:03:41.205 WRITE DMA EXT
Error 49383 occurred at disk power-on lifetime: 119 hours (4 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 0f 03 00 e0 Error: ICRC, ABRT at LBA = 0x0000030f = 783
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 08 03 00 e0 00 00:03:39.371 WRITE DMA
ca 00 08 08 01 00 e0 00 00:03:39.371 WRITE DMA
ea 00 00 00 00 00 40 00 00:03:39.371 FLUSH CACHE EXT
35 00 20 b8 0f 36 40 00 00:03:39.371 WRITE DMA EXT
35 00 10 a0 0f 36 40 00 00:03:39.371 WRITE DMA EXT
Error 49382 occurred at disk power-on lifetime: 119 hours (4 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 5f 03 00 e0 Error: ICRC, ABRT at LBA = 0x0000035f = 863
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 58 03 00 e0 00 00:03:37.490 WRITE DMA
ca 00 08 58 01 00 e0 00 00:03:37.490 WRITE DMA
c8 00 08 08 71 00 e7 00 00:03:37.490 READ DMA
ea 00 00 00 00 00 40 00 00:03:37.490 FLUSH CACHE EXT
35 00 08 a8 51 6f 40 00 00:03:37.490 WRITE DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 5191 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Editor is loading...
Leave a Comment