dmesg
unknown
plain_text
3 months ago
48 kB
70
No Index
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.12.34+rpt-rpi-v8 (serge@raspberrypi.com) (aarch64-linux-gnu-gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.12.34-1+rpt1~bookworm (2025-06-26)
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 3 Model A Plus Rev 1.1
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000000b800000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000000b800000..0x000000001b7fffff (262144 KiB) map reusable linux,cma
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x0b79b840-0x0b79e53f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] On node 0, zone DMA: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 33 pages/cpu s95064 r8192 d31912 u135168
[ 0.000000] pcpu-alloc: s95064 r8192 d31912 u135168 alloc=33*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 843419
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=9dbe7878-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=GB
[ 0.000000] cgroup: Disabling memory control group subsystem
[ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 114688
[ 0.000000] Policy zone: DMA
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 45267 entries in 177 pages
[ 0.000000] ftrace: allocated 177 pages with 4 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000002] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000231] Console: colour dummy device 80x25
[ 0.000243] printk: legacy console [tty1] enabled
[ 0.000718] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.000741] pid_max: default: 32768 minimum: 301
[ 0.000800] LSM: initializing lsm=capability
[ 0.000960] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.000983] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.003020] rcu: Hierarchical SRCU implementation.
[ 0.003060] rcu: Max phase no-delay instances is 1000.
[ 0.003269] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.004310] EFI services will not be available.
[ 0.004573] smp: Bringing up secondary CPUs ...
[ 0.005069] Detected VIPT I-cache on CPU1
[ 0.005175] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.005946] Detected VIPT I-cache on CPU2
[ 0.006019] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.006634] Detected VIPT I-cache on CPU3
[ 0.006697] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.006891] smp: Brought up 1 node, 4 CPUs
[ 0.006958] SMP: Total of 4 processors activated.
[ 0.006968] CPU: All CPU(s) started at EL2
[ 0.006989] CPU features: detected: 32-bit EL0 Support
[ 0.007000] CPU features: detected: 32-bit EL1 Support
[ 0.007012] CPU features: detected: CRC32 instructions
[ 0.007067] alternatives: applying system-wide alternatives
[ 0.008527] Memory: 146604K/458752K available (14144K kernel code, 2406K rwdata, 4820K rodata, 5440K init, 577K bss, 45364K reserved, 262144K cma-reserved)
[ 0.008966] devtmpfs: initialized
[ 0.015863] Enabled cp15_barrier support
[ 0.015910] Enabled setend support
[ 0.016056] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.016085] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.025506] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[ 0.025558] 0 pages in range for non-PLT usage
[ 0.025562] 517376 pages in range for PLT usage
[ 0.025802] pinctrl core: initialized pinctrl subsystem
[ 0.026353] DMI not present or invalid.
[ 0.028791] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.032082] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.032324] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.032674] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.032748] audit: initializing netlink subsys (disabled)
[ 0.032994] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
[ 0.033462] thermal_sys: Registered thermal governor 'step_wise'
[ 0.033505] cpuidle: using governor menu
[ 0.033696] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.033805] ASID allocator initialised with 32768 entries
[ 0.034439] Serial: AMBA PL011 UART driver
[ 0.037783] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.044531] raspberrypi-firmware soc:firmware: Attached to firmware from 2025-04-30T13:35:18, variant start
[ 0.048532] raspberrypi-firmware soc:firmware: Firmware hash is 5560078dcc8591a00f57b9068d13e5544aeef3aa
[ 0.057848] bcm2835-dma 3f007000.dma-controller: DMA legacy API manager, dmachans=0x1
[ 0.058682] iommu: Default domain type: Translated
[ 0.058703] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.059964] SCSI subsystem initialized
[ 0.060152] usbcore: registered new interface driver usbfs
[ 0.060193] usbcore: registered new interface driver hub
[ 0.060237] usbcore: registered new device driver usb
[ 0.060559] pps_core: LinuxPPS API ver. 1 registered
[ 0.060572] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.060599] PTP clock support registered
[ 0.061681] vgaarb: loaded
[ 0.062097] clocksource: Switched to clocksource arch_sys_counter
[ 0.062616] VFS: Disk quotas dquot_6.6.0
[ 0.062650] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.068260] NET: Registered PF_INET protocol family
[ 0.068559] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.069211] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.069248] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.069268] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.069301] TCP bind hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.069382] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.069551] MPTCP token hash table entries: 256 (order: 0, 6144 bytes, linear)
[ 0.069595] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.069622] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.069746] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.070184] RPC: Registered named UNIX socket transport module.
[ 0.070200] RPC: Registered udp transport module.
[ 0.070211] RPC: Registered tcp transport module.
[ 0.070220] RPC: Registered tcp-with-tls transport module.
[ 0.070232] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.070251] PCI: CLS 0 bytes, default 64
[ 0.070585] Trying to unpack rootfs image as initramfs...
[ 0.079021] kvm [1]: nv: 554 coarse grained trap handlers
[ 0.079625] kvm [1]: IPA Size Limit: 40 bits
[ 0.080765] kvm [1]: Hyp nVHE mode initialized successfully
[ 0.390241] Freeing initrd memory: 7492K
[ 0.873150] Initialise system trusted keyrings
[ 0.874151] workingset: timestamp_bits=42 max_order=17 bucket_order=0
[ 0.874833] NFS: Registering the id_resolver key type
[ 0.874873] Key type id_resolver registered
[ 0.874884] Key type id_legacy registered
[ 0.874909] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.874923] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.875485] Key type asymmetric registered
[ 0.875503] Asymmetric key parser 'x509' registered
[ 0.875561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.875742] io scheduler mq-deadline registered
[ 0.875757] io scheduler kyber registered
[ 0.875785] io scheduler bfq registered
[ 0.877447] pinctrl-bcm2835 3f200000.gpio: GPIO_OUT persistence: yes
[ 0.886438] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.890388] simple-framebuffer 1e402000.framebuffer: framebuffer at 0x1e402000, 0x7f8000 bytes
[ 0.890443] simple-framebuffer 1e402000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[ 0.900101] Console: switching to colour frame buffer device 240x67
[ 0.908490] simple-framebuffer 1e402000.framebuffer: fb0: simplefb registered!
[ 0.911802] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.912063] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.919988] brd: module loaded
[ 0.924363] loop: module loaded
[ 0.924963] Loading iSCSI transport class v2.0-870.
[ 0.928035] usbcore: registered new interface driver lan78xx
[ 0.928159] usbcore: registered new interface driver smsc95xx
[ 0.928370] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.656334] Core Release: 2.80a
[ 1.656381] Setting default values for core params
[ 1.656439] Finished setting default values for core params
[ 1.856674] Using Buffer DMA mode
[ 1.856708] Periodic Transfer Interrupt Enhancement - disabled
[ 1.856761] Multiprocessor Interrupt Enhancement - disabled
[ 1.856810] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.856856] Dedicated Tx FIFOs mode
[ 1.858583] INFO:: FIQ DMA bounce buffers: virt = ffffffc080cbb000 dma = 0x00000000cbc00000 len=9024
[ 1.858693] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 1.858869] dwc_otg: Microframe scheduler enabled
[ 1.858895] INFO:: MPHI regs_base at ffffffc08006d000
[ 1.858989] dwc_otg 3f980000.usb: DWC OTG Controller
[ 1.859059] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 1.859142] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[ 1.859226] Init: Port Power? op_state=1
[ 1.859264] Init: Power Port (0)
[ 1.859444] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 1.859517] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.859580] usb usb1: Product: DWC OTG Controller
[ 1.859625] usb usb1: Manufacturer: Linux 6.12.34+rpt-rpi-v8 dwc_otg_hcd
[ 1.859683] usb usb1: SerialNumber: 3f980000.usb
[ 1.860211] hub 1-0:1.0: USB hub found
[ 1.860274] hub 1-0:1.0: 1 port detected
[ 1.860716] dwc_otg: FIQ enabled
[ 1.860722] dwc_otg: NAK holdoff enabled
[ 1.860726] dwc_otg: FIQ split-transaction FSM enabled
[ 1.860736] Module dwc_common_port init
[ 1.861572] usbcore: registered new interface driver uas
[ 1.863874] usbcore: registered new interface driver usb-storage
[ 1.866479] mousedev: PS/2 mouse device common for all mice
[ 1.870390] sdhci: Secure Digital Host Controller Interface driver
[ 1.872585] sdhci: Copyright(c) Pierre Ossman
[ 1.874864] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.877170] hid: raw HID events driver (C) Jiri Kosina
[ 1.879424] usbcore: registered new interface driver usbhid
[ 1.881564] usbhid: USB HID core driver
[ 1.887590] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 (0,8000003f) counters available
[ 1.890795] NET: Registered PF_PACKET protocol family
[ 1.893162] Key type dns_resolver registered
[ 1.912270] registered taskstats version 1
[ 1.914782] Loading compiled-in X.509 certificates
[ 1.923435] Demotion targets for Node 0: null
[ 1.926374] Key type .fscrypt registered
[ 1.928539] Key type fscrypt-provisioning registered
[ 1.938411] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 1.941004] 3f201000.serial: ttyAMA1 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
[ 1.943430] serial serial0: tty port ttyAMA1 registered
[ 1.947205] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.950053] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.953192] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.955426] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 1.970205] Indeed it is in host mode hprt0 = 00021501
[ 1.986399] of_cfs_init
[ 1.988626] of_cfs_init: OK
[ 1.990911] clk: Disabling unused clocks
[ 1.993224] PM: genpd: Disabling unused power domains
[ 2.062131] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[ 2.070922] Freeing unused kernel memory: 5440K
[ 2.073242] Run /init as init process
[ 2.075327] with arguments:
[ 2.075331] /init
[ 2.075335] with environment:
[ 2.075338] HOME=/
[ 2.075342] TERM=linux
[ 2.118670] mmc1: new high speed SDIO card at address 0001
[ 2.150163] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.152643] Indeed it is in host mode hprt0 = 00001101
[ 2.161813] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.167536] mmc0: new high speed SDHC card at address 5048
[ 2.175079] mmcblk0: mmc0:5048 SD32G 29.7 GiB
[ 2.185078] mmcblk0: p1 p2
[ 2.190656] mmcblk0: mmc0:5048 SD32G 29.7 GiB (quirks 0x00004000)
[ 2.370910] usb 1-1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[ 2.373345] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.375573] usb 1-1: Product: SanDisk 3.2Gen1
[ 2.377770] usb 1-1: Manufacturer: USB
[ 2.380116] usb 1-1: SerialNumber: 0501e4a44fab0315369ad4c85aff3420c5e366f93409e668c2c040f4c1f68a6fa8a10000000000000000000098cfa4b9ff1f1b108155810798ac355b
[ 2.384355] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2.388019] scsi host0: usb-storage 1-1:1.0
[ 2.573978] Console: switching to colour dummy device 80x25
[ 2.587256] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 2.985328] EXT4-fs (mmcblk0p2): mounted filesystem d4cc7d63-da78-48ad-9bdd-64ffbba449a8 ro with ordered data mode. Quota mode: none.
[ 3.423144] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
[ 3.429069] sd 0:0:0:0: [sda] 240328704 512-byte logical blocks: (123 GB/115 GiB)
[ 3.429922] sd 0:0:0:0: [sda] Write Protect is off
[ 3.429945] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 3.430212] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.447575] sda: sda1
[ 3.447893] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.449506] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 3.676519] systemd[1]: System time before build time, advancing clock.
[ 3.826269] NET: Registered PF_INET6 protocol family
[ 3.827205] Segment Routing with IPv6
[ 3.827255] In-situ OAM (IOAM) with IPv6
[ 3.891059] systemd[1]: systemd 252.38-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 3.891150] systemd[1]: Detected architecture arm64.
[ 3.909385] systemd[1]: Hostname set to <raspberrypi>.
[ 4.651976] systemd[1]: Queued start job for default target multi-user.target.
[ 4.680259] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 4.681748] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 4.683165] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 4.684023] systemd[1]: Created slice user.slice - User and Session Slice.
[ 4.684466] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 4.684803] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 4.685477] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 4.685739] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-9dbe7878\x2d01.device - /dev/disk/by-partuuid/9dbe7878-01...
[ 4.685904] systemd[1]: Expecting device dev-disk-by\x2duuid-c85f91c2\x2db115\x2d4934\x2daca2\x2dab5fa625d0fd.device - /dev/disk/by-uuid/c85f91c2-b115-4934-aca2-ab5fa625d0fd...
[ 4.686140] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 4.686346] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 4.686598] systemd[1]: Reached target paths.target - Path Units.
[ 4.686814] systemd[1]: Reached target slices.target - Slice Units.
[ 4.687005] systemd[1]: Reached target swap.target - Swaps.
[ 4.687207] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 4.687854] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 4.688295] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 4.689390] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 4.690171] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 4.690888] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 4.691674] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 4.692240] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 4.692893] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 4.695532] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 4.699048] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 4.702819] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 4.703610] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 4.711284] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 4.715410] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 4.720075] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 4.725016] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 4.730438] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 4.737369] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 4.744225] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 4.751758] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 4.757245] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 4.758352] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 4.767347] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 4.800191] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 4.814932] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 4.816101] fuse: init (API version 7.41)
[ 4.822814] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 4.829355] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 4.839675] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 4.842508] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 4.843718] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 4.845489] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[ 4.849138] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 4.851281] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 4.851919] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 4.854617] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 4.855770] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 4.857431] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 4.858250] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 4.859789] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 4.860442] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 4.861940] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 4.862610] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 4.864004] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 4.864512] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 4.902565] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 4.906558] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 4.907223] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 4.912282] systemd[1]: Started systemd-journald.service - Journal Service.
[ 4.921170] EXT4-fs (mmcblk0p2): re-mounted d4cc7d63-da78-48ad-9bdd-64ffbba449a8 r/w.
[ 5.010348] systemd-journald[234]: Received client request to flush runtime journal.
[ 5.863031] rpi-gpiomem 3f200000.gpiomem: window base 0x3f200000 size 0x00001000
[ 5.864507] rpi-gpiomem 3f200000.gpiomem: initialised 1 regions as /dev/gpiomem
[ 5.867914] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 5.886368] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.892887] bcm2835-audio bcm2835-audio: card created with 8 channels
[ 5.895603] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 5.958392] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.976703] mc: Linux media interface: v0.10
[ 5.990832] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 5.992176] Registered IR keymap rc-cec
[ 5.992344] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0
[ 5.992506] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0
[ 6.009161] input: vc4-hdmi HDMI Jack as /devices/platform/soc/3f902000.hdmi/sound/card1/input1
[ 6.011856] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.012276] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[ 6.012463] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.012625] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.012766] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.012883] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ 6.023657] [drm] Initialized vc4 0.0.0 for soc:gpu on minor 0
[ 6.059832] videodev: Linux video capture interface: v2.00
[ 6.113531] Console: switching to colour frame buffer device 240x67
[ 6.135311] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.143026] vc4-drm soc:gpu: [drm] fb0: vc4drmfb frame buffer device
[ 6.144879] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 6.144927] [vc_sm_connected_init]: start
[ 6.148505] [vc_sm_connected_init]: installed successfully
[ 6.154346] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.162816] Bluetooth: Core ver 2.22
[ 6.163203] NET: Registered PF_BLUETOOTH protocol family
[ 6.163227] Bluetooth: HCI device and connection manager initialized
[ 6.163271] Bluetooth: HCI socket layer initialized
[ 6.163285] Bluetooth: L2CAP socket layer initialized
[ 6.163340] Bluetooth: SCO socket layer initialized
[ 6.181806] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.190572] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.195786] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.196416] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 6.199725] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 6.200360] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 6.200848] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 6.200906] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 6.200920] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 6.200929] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 6.200938] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 6.205702] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 6.205757] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 6.206802] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 6.207789] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 6.208690] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 6.211852] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 6.211927] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 6.211944] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 6.211954] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 6.211965] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 6.212721] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 6.218627] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 6.218683] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 6.225083] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 6.225149] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 6.235543] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 6.235586] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 6.240838] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 6.240913] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 6.241083] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.242866] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 6.245336] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 6.246027] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.252529] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 6.291309] Bluetooth: HCI UART driver ver 2.3
[ 6.291341] Bluetooth: HCI UART protocol H4 registered
[ 6.291425] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 6.291674] Bluetooth: HCI UART protocol Broadcom registered
[ 6.293663] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 6.293962] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 6.644089] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 6.654371] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.655104] Bluetooth: hci0: BCM: chip id 107
[ 6.655252] usbcore: registered new interface driver brcmfmac
[ 6.655427] Bluetooth: hci0: BCM: features 0x2f
[ 6.656598] Bluetooth: hci0: BCM4345C0
[ 6.656628] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 6.670082] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,3-model-b-plus.hcd' Patch
[ 6.781356] EXT4-fs (sda1): mounted filesystem c85f91c2-b115-4934-aca2-ab5fa625d0fd r/w with ordered data mode. Quota mode: none.
[ 6.933612] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 6.934307] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b
[ 7.471032] Bluetooth: hci0: BCM: features 0x2f
[ 7.472662] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 7.472703] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 7.473132] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[ 7.834534] Adding 524284k swap on /var/swap. Priority:-2 extents:11 across:16498688k SS
[ 8.317501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.317531] Bluetooth: BNEP filters: protocol multicast
[ 8.317550] Bluetooth: BNEP socket layer initialized
[ 8.328525] Bluetooth: MGMT ver 1.23
[ 8.356443] NET: Registered PF_ALG protocol family
[ 9.655702] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 1989.644713] WARN::dwc_otg_hcd_urb_dequeue:639: Timed out waiting for FSM NP transfer to complete on 4
[ 1989.644818] Indeed it is in host mode hprt0 = 00001101
[ 1989.824290] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[ 1989.824400] Indeed it is in host mode hprt0 = 00001101
[ 1990.020861] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=31s
[ 1990.020883] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 58 06 40 00 00 f0 00
[ 1990.020890] I/O error, dev sda, sector 5768768 op 0x0:(READ) flags 0x84700 phys_seg 16 prio class 0
[ 3203.555842] mmc1: Controller never released inhibit bit(s).
[ 3203.556036] brcmfmac: mmc_submit_one: CMD53 sg block read failed -5
[ 3203.556074] brcmfmac: brcmf_sdio_rxglom: glom read of 7680 bytes failed: -5
[ 3203.556092] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame
[ 4877.355614] WARN::dwc_otg_hcd_urb_dequeue:639: Timed out waiting for FSM NP transfer to complete on 1
[ 4877.355715] Indeed it is in host mode hprt0 = 00001101
[ 4877.535194] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[ 4877.535300] Indeed it is in host mode hprt0 = 00001101
[ 4877.731748] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=32s
[ 4877.731770] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 01 94 37 80 00 00 f0 00
[ 4877.731777] I/O error, dev sda, sector 26490752 op 0x0:(READ) flags 0x84700 phys_seg 23 prio class 0
[ 5250.095865] WARN::dwc_otg_hcd_urb_dequeue:639: Timed out waiting for FSM NP transfer to complete on 2
[ 5250.095966] Indeed it is in host mode hprt0 = 00001101
[ 5250.275487] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[ 5250.275641] Indeed it is in host mode hprt0 = 00001101
[ 5250.472017] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=31s
[ 5250.472037] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 01 f3 3c 40 00 00 f0 00
[ 5250.472045] I/O error, dev sda, sector 32717888 op 0x0:(READ) flags 0x84700 phys_seg 30 prio class 0
[ 7848.273800] mmc1: Controller never released inhibit bit(s).
[ 7848.273958] brcmfmac: mmc_submit_one: CMD53 sg block read failed -5
[ 7848.273977] brcmfmac: brcmf_sdio_rxglom: glom read of 12288 bytes failed: -5
[ 7848.273991] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame
[ 9975.339039] mmc1: Controller never released inhibit bit(s).
[ 9975.339283] brcmfmac: mmc_submit_one: CMD53 sg block read failed -5
[ 9975.339325] brcmfmac: brcmf_sdio_rxglom: glom read of 13824 bytes failed: -5
[ 9975.339343] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame
[12209.274979] WARN::dwc_otg_hcd_urb_dequeue:639: Timed out waiting for FSM NP transfer to complete on 7
[12209.275087] Indeed it is in host mode hprt0 = 00001101
[12209.454546] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[12209.454654] Indeed it is in host mode hprt0 = 00001101
[12209.651149] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=31s
[12209.651172] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 05 0e 5c 60 00 00 f0 00
[12209.651179] I/O error, dev sda, sector 84827232 op 0x0:(READ) flags 0x84700 phys_seg 5 prio class 0
[13291.980220] mmc1: Controller never released inhibit bit(s).
[13291.980380] brcmfmac: brcmf_sdio_readframes: read 1484 bytes from channel 2 failed: -5
[13291.980412] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame
[15101.345187] mmc1: Got command interrupt 0x00000001 even though no command operation was in progress.
[15238.327166] WARN::dwc_otg_hcd_urb_dequeue:639: Timed out waiting for FSM NP transfer to complete on 1
[15238.327266] Indeed it is in host mode hprt0 = 00001101
[15238.506749] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[15238.506865] Indeed it is in host mode hprt0 = 00001101
[15238.703297] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=30s
[15238.703319] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 06 86 84 30 00 00 10 00
[15238.703326] I/O error, dev sda, sector 109478960 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19436.733861] WARN::dwc_otg_hcd_urb_dequeue:639: Timed out waiting for FSM NP transfer to complete on 6
[19436.733968] Indeed it is in host mode hprt0 = 00001501
[19436.913446] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[19436.913556] Indeed it is in host mode hprt0 = 00001501
[19437.109977] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=30s
[19437.110003] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 09 1d fa 40 00 00 f0 00
[19437.110011] I/O error, dev sda, sector 152959552 op 0x0:(READ) flags 0x84700 phys_seg 30 prio class 0
[21761.237069] WARN::dwc_otg_hcd_urb_dequeue:639: Timed out waiting for FSM NP transfer to complete on 2
[21761.237169] Indeed it is in host mode hprt0 = 00001101
[21761.416654] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[21761.416792] Indeed it is in host mode hprt0 = 00001101
[21761.613452] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=31s
[21761.613487] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 0a 0b 16 40 00 00 f0 00
[21761.613501] I/O error, dev sda, sector 168498752 op 0x0:(READ) flags 0x84700 phys_seg 8 prio class 0
[24484.368605] mmc1: Controller never released inhibit bit(s).
[24484.368805] brcmfmac: brcmf_sdio_readframes: read 1484 bytes from channel 2 failed: -5
[24484.368945] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame
[24835.275476] mmc1: Controller never released inhibit bit(s).
[24835.275638] brcmfmac: brcmf_sdio_read_control: read 2048 control bytes failed: -5
[24835.275666] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame, send NAK
[25520.494288] mmc1: Controller never released inhibit bit(s).
[25520.494445] brcmfmac: mmc_submit_one: CMD53 sg block read failed -5
[25520.494474] brcmfmac: brcmf_sdio_rxglom: glom read of 4608 bytes failed: -5
[25520.494490] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame
[25520.494670] brcmfmac: brcmf_sdio_hdparse: HW header length too long
[25520.494677] brcmfmac: brcmf_sdio_rxfail: terminate frame
[25900.292772] WARN::dwc_otg_hcd_urb_dequeue:639: Timed out waiting for FSM NP transfer to complete on 7
[25900.292875] Indeed it is in host mode hprt0 = 00001501
[25900.472354] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[25900.472459] Indeed it is in host mode hprt0 = 00001101
[25900.668933] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=31s
[25900.668955] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 0c 0a 00 30 00 00 10 00
[25900.668962] I/O error, dev sda, sector 201982000 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[25931.012900] Indeed it is in host mode hprt0 = 00001101
[25931.192758] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[25931.192900] Indeed it is in host mode hprt0 = 00001101
[25961.737275] Indeed it is in host mode hprt0 = 00001101
[25961.917098] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[25961.917202] Indeed it is in host mode hprt0 = 00001101
[25978.601420] Indeed it is in host mode hprt0 = 00001101
[25978.781323] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[25978.781470] Indeed it is in host mode hprt0 = 00001101
[25978.977837] Indeed it is in host mode hprt0 = 00001101
[25979.157327] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[25979.157444] Indeed it is in host mode hprt0 = 00001101
[25989.609489] Indeed it is in host mode hprt0 = 00001101
[25989.789446] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[25989.789552] Indeed it is in host mode hprt0 = 00001101
[25989.985938] sd 0:0:0:0: Device offlined - not ready after error recovery
[25989.985977] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x05 driverbyte=DRIVER_OK cmd_age=89s
[25989.985991] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 0c 09 20 98 00 00 f0 00
[25989.985998] I/O error, dev sda, sector 201924760 op 0x1:(WRITE) flags 0x4000 phys_seg 15 prio class 0
[25989.986060] sd 0:0:0:0: rejecting I/O to offline device
[25989.986072] I/O error, dev sda, sector 201982016 op 0x0:(READ) flags 0x84700 phys_seg 16 prio class 0
[25989.986136] I/O error, dev sda, sector 201925000 op 0x1:(WRITE) flags 0x4000 phys_seg 15 prio class 0
[25989.986169] I/O error, dev sda, sector 201925240 op 0x1:(WRITE) flags 0x4000 phys_seg 15 prio class 0
[25989.986190] I/O error, dev sda, sector 30798960 op 0x0:(READ) flags 0x84700 phys_seg 16 prio class 0
[25989.986202] I/O error, dev sda, sector 30799200 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[25989.986268] I/O error, dev sda, sector 201925480 op 0x1:(WRITE) flags 0x4000 phys_seg 15 prio class 0
[25989.986284] I/O error, dev sda, sector 201925720 op 0x1:(WRITE) flags 0x4000 phys_seg 16 prio class 0
[25989.986324] I/O error, dev sda, sector 201925960 op 0x1:(WRITE) flags 0x4000 phys_seg 16 prio class 0
[25989.986340] I/O error, dev sda, sector 201926200 op 0x1:(WRITE) flags 0x4000 phys_seg 16 prio class 0
[25989.986396] Aborting journal on device sda1-8.
[25989.986421] Buffer I/O error on dev sda1, logical block 14712832, lost sync page write
[25989.986438] JBD2: I/O error when updating journal superblock for sda1-8.
[25989.986911] EXT4-fs error (device sda1): ext4_journal_check_start:84: comm ffmpeg: Detected aborted journal
[25989.987066] Buffer I/O error on dev sda1, logical block 0, lost sync page write
[25989.987084] EXT4-fs (sda1): I/O error while writing superblock
[25989.987090] EXT4-fs (sda1): Remounting filesystem read-only
[25989.987461] EXT4-fs warning (device sda1): ext4_end_bio:353: I/O error 10 writing to inode 48 starting block 25240895)
[25989.987496] Buffer I/O error on device sda1, logical block 25240129
[25989.987520] Buffer I/O error on device sda1, logical block 25240130
[25989.987529] Buffer I/O error on device sda1, logical block 25240131
[25989.987537] Buffer I/O error on device sda1, logical block 25240132
[25989.987544] Buffer I/O error on device sda1, logical block 25240133
[25989.987551] Buffer I/O error on device sda1, logical block 25240134
[25989.987558] Buffer I/O error on device sda1, logical block 25240135
[25989.987565] Buffer I/O error on device sda1, logical block 25240136
[25989.987572] Buffer I/O error on device sda1, logical block 25240137
[25989.987579] Buffer I/O error on device sda1, logical block 25240138
[25989.989941] EXT4-fs warning (device sda1): ext4_end_bio:353: I/O error 10 writing to inode 48 starting block 25241376)
[25989.992312] EXT4-fs warning (device sda1): ext4_end_bio:353: I/O error 10 writing to inode 48 starting block 25241765)
[25989.994594] EXT4-fs warning (device sda1): ext4_end_bio:353: I/O error 10 writing to inode 48 starting block 25242034)
[25989.996006] EXT4-fs warning (device sda1): ext4_end_bio:353: I/O error 10 writing to inode 48 starting block 25242290)
[25989.996782] EXT4-fs warning (device sda1): ext4_end_bio:353: I/O error 10 writing to inode 48 starting block 25242427)
[25994.355629] EXT4-fs warning (device sda1): htree_dirblock_to_tree:1083: inode #2: lblock 0: comm smbd: error -5 reading directory block
[25994.531085] EXT4-fs warning (device sda1): htree_dirblock_to_tree:1083: inode #2: lblock 0: comm smbd: error -5 reading directory block
[25995.144321] blk_print_req_error: 89 callbacks suppressed
[25995.144340] I/O error, dev sda, sector 76160 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[25995.227201] I/O error, dev sda, sector 76160 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[26180.633215] EXT4-fs (sda1): unmounting filesystem c85f91c2-b115-4934-aca2-ab5fa625d0fd.
[26180.634038] I/O error, dev sda, sector 2048 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[26180.634058] Buffer I/O error on dev sda1, logical block 0, lost sync page write
[26180.634077] EXT4-fs (sda1): I/O error while writing superblock
[26203.455719] /dev/sda1: Can't open blockdev
[26305.385932] dwc_otg 3f980000.usb: remove, state 1
[26305.385998] usb usb1: USB disconnect, device number 1
[26305.386013] usb 1-1: USB disconnect, device number 2
[26305.475506] PortPower off
[26305.476575] dwc_otg 3f980000.usb: USB bus 1 deregistered
[26311.077820] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
[26311.077991] Mem abort info:
[26311.078048] ESR = 0x0000000096000005
[26311.078119] EC = 0x25: DABT (current EL), IL = 32 bits
[26311.078212] SET = 0, FnV = 0
[26311.078273] EA = 0, S1PTW = 0
[26311.078334] FSC = 0x05: level 1 translation fault
[26311.078419] Data abort info:
[26311.078475] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[26311.078567] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[26311.078654] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[26311.078746] user pgtable: 4k pages, 39-bit VAs, pgdp=000000000376e000
[26311.078852] [0000000000000040] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[26311.079010] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[26311.079117] Modules linked in: cmac algif_hash aes_arm64 aes_generic algif_skcipher af_alg bnep brcmfmac_wcc brcmfmac binfmt_misc brcmutil hci_uart bcm2835_v4l2(C) bcm2835_codec(C) btbcm bcm2835_isp(C) cfg80211 bcm2835_mmal_vchiq(C) bluetooth vc_sm_cma(C) videobuf2_vmalloc v4l2_mem2mem videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videodev raspberrypi_hwmon ecdh_generic ecc videobuf2_common i2c_bcm2835 mc rfkill sg libaes snd_bcm2835(C) raspberrypi_gpiomem fuse dm_mod ip_tables x_tables ipv6 vc4 snd_soc_hdmi_codec snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd drm_display_helper drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks backlight cec uio_pdrv_genirq uio
[26311.080067] CPU: 1 UID: 0 PID: 7590 Comm: tee Tainted: G C 6.12.34+rpt-rpi-v8 #1 Debian 1:6.12.34-1+rpt1~bookworm
[26311.080191] Tainted: [C]=CRAP
[26311.080230] Hardware name: Raspberry Pi 3 Model A Plus Rev 1.1 (DT)
[26311.080299] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[26311.080377] pc : dwc_otg_driver_remove+0x28/0xa8
[26311.080448] lr : dwc_otg_driver_probe+0x434/0xb48
[26311.080510] sp : ffffffc0822c3b40
[26311.080552] x29: ffffffc0822c3b40 x28: ffffff8004fda100 x27: 0000000000000000
[26311.080642] x26: 0000000000000000 x25: ffffffdfb33b3478 x24: ffffff8002bf2c00
[26311.080731] x23: ffffff8002d5c500 x22: 0000000000000000 x21: ffffff8002bf2c10
[26311.080821] x20: ffffff8002bf2c00 x19: 0000000000000000 x18: ffffffffffffffff
[26311.080911] x17: 0000000000000000 x16: 0000000000000010 x15: 0000000000000001
[26311.080999] x14: 0000000020000000 x13: 0000000100000003 x12: 8000000800000008
[26311.081088] x11: ffffffc08003d000 x10: 0000000000001a40 x9 : ffffffdfb2bf68f4
[26311.081178] x8 : ffffff8003596840 x7 : 0000000000000000 x6 : ffffff8004424cb0
[26311.081267] x5 : ffffff8004fda100 x4 : ffffff800b73d3e0 x3 : 000000000716c621
[26311.081355] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8002bf2c00
[26311.081445] Call trace:
[26311.081480] dwc_otg_driver_remove+0x28/0xa8
[26311.081539] dwc_otg_driver_probe+0x434/0xb48
[26311.081598] platform_probe+0x70/0xd0
[26311.081649] really_probe+0xc4/0x2a8
[26311.081702] __driver_probe_device+0x80/0x140
[26311.081761] device_driver_attach+0x50/0xc0
[26311.081819] bind_store+0x84/0xe0
[26311.081867] drv_attr_store+0x2c/0x48
[26311.081918] sysfs_kf_write+0x4c/0x68
[26311.081972] kernfs_fop_write_iter+0x128/0x200
[26311.082030] vfs_write+0x248/0x388
[26311.082083] ksys_write+0x7c/0x120
[26311.082134] __arm64_sys_write+0x24/0x38
[26311.082189] invoke_syscall+0x50/0x120
[26311.082246] el0_svc_common.constprop.0+0x48/0xf0
[26311.082309] do_el0_svc+0x24/0x38
[26311.082359] el0_svc+0x30/0x100
[26311.082410] el0t_64_sync_handler+0x100/0x130
[26311.082470] el0t_64_sync+0x190/0x198
[26311.082526] Code: 91004015 a90153f3 aa0003f4 f9403eb3 (f9402261)
[26311.082597] ---[ end trace 0000000000000000 ]---
Editor is loading...
Leave a Comment