Untitled

INFO Reading configuration /config/esphome/16gpio.yaml...
INFO Starting log output from 10.10.1.35 using esphome API
INFO Connecting to 10.10.1.35:6053 (10.10.1.35)
INFO Successfully connected to 10.10.1.35
[19:32:53][I][app:106]: ESPHome version 2021.8.2 compiled on Sep  7 2021, 19:26:56
[19:32:53][C][wifi:499]: WiFi:
[19:32:53][C][wifi:359]:   SSID: [redacted]
[19:32:53][C][wifi:360]:   IP Address: 10.10.1.35
[19:32:53][C][wifi:362]:   BSSID: [redacted]
[19:32:53][C][wifi:363]:   Hostname: '16gpio'
[19:32:53][C][wifi:367]:   Signal strength: -35 dB ▂▄▆█
[19:32:53][C][wifi:371]:   Channel: 1
[19:32:53][C][wifi:372]:   Subnet: 255.255.255.0
[19:32:53][C][wifi:373]:   Gateway: 10.10.1.1
[19:32:53][C][wifi:374]:   DNS1: 0.0.0.0
[19:32:53][C][wifi:375]:   DNS2: 0.0.0.0
[19:32:53][C][i2c:028]: I2C Bus:
[19:32:53][C][i2c:029]:   SDA Pin: GPIO21
[19:32:53][C][i2c:030]:   SCL Pin: GPIO22
[19:32:53][C][i2c:031]:   Frequency: 50000 Hz
[19:32:53][I][i2c:033]: Scanning i2c bus for active devices...
[19:32:53][I][i2c:049]: Found no i2c devices!
[19:32:53][C][pcf8574:021]: PCF8574:
[19:32:53][C][pcf8574:022]:   Address: 0x20
[19:32:53][C][pcf8574:023]:   Is PCF8575: YES
[19:32:53][E][pcf8574:025]: Communication with PCF8574 failed!
[19:32:53][C][switch.gpio:048]: GPIO Switch 'Relay'
[19:32:53][C][switch.gpio:049]:   Pin: GPIO0 (Mode: OUTPUT)
[19:32:53][C][switch.gpio:071]:   Restore Mode: Restore (Defaults to OFF)
[19:32:53][C][logger:189]: Logger:
[19:32:53][C][logger:190]:   Level: DEBUG
[19:32:53][C][logger:191]:   Log Baud Rate: 115200
[19:32:53][C][logger:192]:   Hardware UART: UART0
[19:32:53][C][captive_portal:148]: Captive Portal:
[19:32:53][C][ota:029]: Over-The-Air Updates:
[19:32:53][C][ota:030]:   Address: 10.10.1.35:3232
[19:32:53][C][ota:032]:   Using Password.
[19:32:53][C][api:095]: API Server:
[19:32:53][C][api:096]:   Address: 10.10.1.35:6053