Untitled
unknown
plain_text
9 months ago
180 kB
16
No Index
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.329-OrangeFox-miatoll-yamk (darth9@darth9-server) (ZyC clang version 18.0.0 (https://github.com/llvm/llvm-project f0535c72bf574fe4c5a46925670591e79ce39959), LLD 18.0.0) #1 SMP PREEMPT Thu Nov 9 13:54:05 GMT 2023
[ 0.000000] Boot CPU: AArch64 Processor [51df805e]
[ 0.000000] random: crng init done
[ 0.000000] Machine: Qualcomm Technologies, Inc. ATOLL-AB PM6150 wcd937x Audio Codec AB IDP GRAM
[ 0.000000] mem-offline: no memory to offline for DDR size:4258267136
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7000000, size 140 MiB
[ 0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6000000, size 16 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5800000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3800000, size 32 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080000000, size 6 MiB
[ 0.000000] OF: reserved mem: initialized node hyp_region@80000000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080700000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node xbl_aop_mem@80700000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x00000000808ff000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node sec_apps_region@808ff000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080900000, size 2 MiB
[ 0.000000] OF: reserved mem: initialized node smem@80900000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080b00000, size 57 MiB
[ 0.000000] OF: reserved mem: initialized node removed_region@80b00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086000000, size 132 MiB
[ 0.000000] OF: reserved mem: initialized node modem_region@86000000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e400000, size 5 MiB
[ 0.000000] OF: reserved mem: initialized node camera_region@8e400000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e900000, size 5 MiB
[ 0.000000] OF: reserved mem: initialized node pil_npu_region@8e900000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008ee00000, size 5 MiB
[ 0.000000] OF: reserved mem: initialized node pil_video_region@8ee00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008f300000, size 30 MiB
[ 0.000000] OF: reserved mem: initialized node cdsp_regions@8f300000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000091100000, size 40 MiB
[ 0.000000] OF: reserved mem: initialized node pil_adsp_region@91100000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000093900000, size 2 MiB
[ 0.000000] OF: reserved mem: initialized node wlan_fw_region@93900000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000093b00000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node ipa_fw_region@93b00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000093b10000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node ipa_gsi_region@93b10000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000093b15000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node gpu_region@93b15000, compatible id removed-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009e000000, size 20 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_region@9e000000, compatible id shared-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000009f400000, size 30 MiB
[ 0.000000] OF: reserved mem: initialized node cdsp_sec_regions@0x9f400000, compatible id removed-dma-pool
[ 0.000000] cma: dma_contiguous_reserve(limit 100000000)
[ 0.000000] On node 0 totalpages: 953768
[ 0.000000] DMA zone: 6711 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 429480 pages, LIFO batch:31
[ 0.000000] Normal zone: 8192 pages used for memmap
[ 0.000000] Normal zone: 524288 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 20 pages/cpu s44184 r8192 d29544 u81920
[ 0.000000] pcpu-alloc: s44184 r8192 d29544 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] CPU features: kernel page table isolation forced OFF by kpti command line option
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 938865
[ 0.000000] Kernel command line: cgroup_disable=pressure rcupdate.rcu_expedited=1 rcu_nocbs=0-7 noirqdebug kpti=0 console=ttyMSM0,115200n8 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 androidboot.usbcontroller=a600000.dwc3 swiotlb=2048 cgroup.memory=nokmem,nosocket androidboot.selinux=permissive androidboot.init_fatal_reboot_target=recovery buildvariant=eng androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=2432 androidboot.vbmeta.digest=d74f46341fc51a406bc72a82c5aec704bf5fc9dcc5986384af29c52a566d7dc3 androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing androidboot.bootdevice=1d84000.ufshc androidboot.fstab_suffix=default androidboot.boot_devices=soc/1d84000.ufshc androidboot.seri
[ 0.000000] I am fpc fingerprint
[ 0.000000] cgroup: Disabling pressure control group feature
[ 0.000000] IRQ lockup detection disabled
[ 0.000000] board_id_hwversion_product_num : 6
[ 0.000000] board_id_hwversion_major_num : 90
[ 0.000000] board_id_hwversion_minor_num : 0
[ 0.000000] board_id_hwlevel : 9 (MP)
[ 0.000000] board_id_hwname : gram
[ 0.000000] board_33w_supported : true
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
[ 0.000000] log_buf_len min size: 131072 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 123608(94%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0xf3400000-0xf3800000] (4MB)
[ 0.000000] Memory: 3428564K/3815072K available (21950K kernel code, 2762K rwdata, 11152K rodata, 4288K init, 7913K bss, 185804K reserved, 200704K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] \x09RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] \x09All grace periods are expedited (rcu_expedited).
[ 0.000000] \x09Tasks RCU enabled.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] \x09Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000015] clocksource: Switched to clocksource arch_sys_counter
[ 0.001411] Console: colour dummy device 80x25
[ 0.001430] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.001437] pid_max: default: 32768 minimum: 301
[ 0.001512] Security Framework initialized
[ 0.001520] SELinux: Initializing.
[ 0.001574] SELinux: Starting in permissive mode
[ 0.001604] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001614] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014221] ASID allocator initialised with 32768 entries
[ 0.016324] Hierarchical SRCU implementation.
[ 0.020600] MSM Memory Dump base table set up
[ 0.020616] MSM Memory Dump apps data table set up
[ 0.022964] smp: Bringing up secondary CPUs ...
[ 0.082828] CPU features: enabling workaround for Mismatched cache type
[ 0.082840] CPU features: enabling workaround for ARM erratum 1188873
[ 0.082857] CPU features: Unsupported CPU feature variation detected.
[ 0.083414] arch_timer: Enabling local workaround for ARM erratum 1188873
[ 0.093724] arch_timer: Enabling local workaround for ARM erratum 1188873
[ 0.093901] smp: Brought up 1 node, 8 CPUs
[ 0.093916] SMP: Total of 8 processors activated.
[ 0.093921] CPU features: detected: GIC system register CPU interface
[ 0.093924] CPU features: detected: Privileged Access Never
[ 0.093928] CPU features: detected: User Access Override
[ 0.093931] CPU features: detected: 32-bit EL0 Support
[ 0.167055] CPU: All CPU(s) started at EL1
[ 0.167112] alternatives: patching kernel code
[ 0.205429] Registered cp15_barrier emulation handler
[ 0.205450] Registered setend emulation handler
[ 0.205585] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.205598] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.208963] pinctrl core: initialized pinctrl subsystem
[ 0.209023] regulator: Failed to create debugfs directory
[ 0.209473] NET: Registered protocol family 16
[ 0.210516] schedtune: configured to support 8 boost groups
[ 0.212002] cpuidle: using governor qcom
[ 0.212075] NET: Registered protocol family 42
[ 0.214105] vdso32: 2 pages (1 code @ 00000000421ecc42, 1 data @ 000000003c94fb2f)
[ 0.214112] vdso: 2 pages (1 code @ 00000000b9a8c085, 1 data @ 000000003c94fb2f)
[ 0.214119] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.214314] cma: cma_alloc(cma 000000008523c27c, count 64, align 6)
[ 0.214700] cma: cma_alloc(): returned 0000000005855e58
[ 0.214776] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.215072] Failed to create IPC log0
[ 0.215075] Failed to create IPC log1
[ 0.215078] Failed to create IPC log2
[ 0.215081] Failed to create IPC log3
[ 0.215083] Failed to create IPC log4
[ 0.215190] exit: IPA_USB init success!
[ 0.215998] pstore: allocate compression buffer error!
[ 0.216006] pstore: Registered ramoops as persistent store backend
[ 0.216011] ramoops: attached 0x400000@0x9d800000, ecc: 16/0
[ 0.218573] msm-dcc 10a2000.dcc_v2: DCC list passed 3
[ 0.218868] msm-dcc 10a2000.dcc_v2: All values written to enable
[ 0.219271] platform 82200000.qseecom: assigned reserved memory node qseecom_region@9e000000
[ 0.219871] msm_watchdog 17c10000.qcom,wdt: wdog absent resource not present
[ 0.220067] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.220117] cma: cma_alloc(): returned 000000003babf38f
[ 0.220150] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.220169] cma: cma_alloc(): returned 0000000071dbb434
[ 0.220197] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.220253] cma: cma_alloc(): returned 0000000058151c34
[ 0.220281] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.220303] cma: cma_alloc(): returned 0000000091536d8a
[ 0.220330] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.220365] cma: cma_alloc(): returned 0000000021013d0a
[ 0.220392] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.220417] cma: cma_alloc(): returned 00000000f04402b8
[ 0.220444] cma: cma_alloc(cma 000000008523c27c, count 38, align 6)
[ 0.220547] cma: cma_alloc(): returned 000000009b301703
[ 0.220598] cma: cma_alloc(cma 000000008523c27c, count 38, align 6)
[ 0.220632] cma: cma_alloc(): returned 00000000bced0786
[ 0.220723] msm_watchdog 17c10000.qcom,wdt: MSM Watchdog Initialized
[ 0.221135] platform 4080000.qcom,mss: assigned reserved memory node modem_region@86000000
[ 0.221189] platform 9800000.qcom,npu: assigned reserved memory node pil_npu_region@8e900000
[ 0.221278] platform 8300000.qcom,turing: assigned reserved memory node cdsp_regions@8f300000
[ 0.221363] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
[ 0.221487] platform 62400000.qcom,lpass: assigned reserved memory node pil_adsp_region@91100000
[ 0.222530] sps:sps is ready.
[ 0.222554] platform soc:qcom,smem: assigned reserved memory node smem@80900000
[ 0.224391] (NULL device *): msm_gsi_probe:4580 failed to create IPC log, continue...
[ 0.224431] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
[ 0.224677] platform soc:qcom,ipa_fws: assigned reserved memory node ipa_fw_region@93b00000
[ 0.227414] platform aae0000.qcom,venus: assigned reserved memory node pil_video_region@8ee00000
[ 0.229609] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
[ 0.233877] atoll-pinctrl 3400000.pinctrl: invalid resource
[ 0.260211] gpu_cx_gdsc: supplied by pm6150l_s1_level
[ 0.260969] clk: add_opp: Set OPP pair (300000000 Hz, 580000 uv) on cpu0
[ 0.260982] clk: add_opp: Set OPP pair (1804800000 Hz, 852000 uv) on cpu0
[ 0.260990] clk: add_opp: Set OPP pair (300000000 Hz, 580000 uv) on cpu1
[ 0.260999] clk: add_opp: Set OPP pair (1804800000 Hz, 852000 uv) on cpu1
[ 0.261008] clk: add_opp: Set OPP pair (300000000 Hz, 580000 uv) on cpu2
[ 0.261018] clk: add_opp: Set OPP pair (1804800000 Hz, 852000 uv) on cpu2
[ 0.261026] clk: add_opp: Set OPP pair (300000000 Hz, 580000 uv) on cpu3
[ 0.261034] clk: add_opp: Set OPP pair (1804800000 Hz, 852000 uv) on cpu3
[ 0.261042] clk: add_opp: Set OPP pair (300000000 Hz, 580000 uv) on cpu4
[ 0.261050] clk: add_opp: Set OPP pair (1804800000 Hz, 852000 uv) on cpu4
[ 0.261059] clk: add_opp: Set OPP pair (300000000 Hz, 580000 uv) on cpu5
[ 0.261068] clk: add_opp: Set OPP pair (1804800000 Hz, 852000 uv) on cpu5
[ 0.261077] clk: add_opp: Set OPP pair (652800000 Hz, 588000 uv) on cpu6
[ 0.261087] clk: add_opp: Set OPP pair (2323200000 Hz, 912000 uv) on cpu6
[ 0.261096] clk: add_opp: Set OPP pair (652800000 Hz, 588000 uv) on cpu7
[ 0.261106] clk: add_opp: Set OPP pair (2323200000 Hz, 912000 uv) on cpu7
[ 0.261172] clk: add_opp: Set OPP pair (300000000 Hz, 568000 uv) on soc:qcom,cpu0-cpu-l3-lat
[ 0.261176] clk: add_opp: Set OPP pair (300000000 Hz, 568000 uv) on soc:qcom,cpu6-cpu-l3-lat
[ 0.261179] clk: add_opp: Set OPP pair (300000000 Hz, 568000 uv) on soc:qcom,cdsp-cdsp-l3-lat
[ 0.261200] clk: add_opp: Set OPP pair (1459200000 Hz, 792000 uv) on soc:qcom,cpu0-cpu-l3-lat
[ 0.261204] clk: add_opp: Set OPP pair (1459200000 Hz, 792000 uv) on soc:qcom,cpu6-cpu-l3-lat
[ 0.261207] clk: add_opp: Set OPP pair (1459200000 Hz, 792000 uv) on soc:qcom,cdsp-cdsp-l3-lat
[ 0.261710] sched-energy: Sched-energy-costs installed from DT
[ 0.262362] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
[ 0.263171] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP
[ 0.264209] clk-rpmh soc:qcom,rpmh: Registered RPMh clocks
[ 0.265030] gpu_cc_gmu_clk_src: set OPP pair(19200000 Hz: 49 uV) on 506a000.qcom,gmu
[ 0.265033] gpu_cc_gmu_clk_src: set OPP pair(200000000 Hz: 49 uV) on 506a000.qcom,gmu
[ 0.265057] gpu_cc_gx_gfx3d_clk_src: set OPP pair(180000000 Hz: 49 uV) on 5000000.qcom,kgsl-3d0
[ 0.265061] gpu_cc_gx_gfx3d_clk_src: set OPP pair(700000000 Hz: 385 uV) on 5000000.qcom,kgsl-3d0
[ 0.265063] gpu_cc_gx_gfx3d_clk_src: set OPP pair(825000000 Hz: 417 uV) on 5000000.qcom,kgsl-3d0
[ 0.265072] gpu_cc-sdmmagpie 5090000.qcom,gpucc: Registered GPU CC clocks
[ 0.266415] atoll-camcc ad00000.qcom,camcc: Registered Camera CC clocks
[ 0.266885] atoll-dispcc af00000.qcom,dispcc: Registered Display CC clocks
[ 0.269879] atoll-gcc 100000.qcom,gcc: Registered GCC clocks
[ 0.270670] atoll-npucc 9980000.qcom,npucc: Registered NPU CC clocks
[ 0.271009] atoll-videocc ab00000.qcom,videocc: Registered Video CC clocks
[ 0.271136] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.271175] cma: cma_alloc(): returned 00000000c2693acb
[ 0.271200] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.271210] cma: cma_alloc(): returned 0000000020d7305c
[ 0.271229] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.271243] cma: cma_alloc(): returned 00000000125a6d07
[ 0.271261] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.271272] cma: cma_alloc(): returned 0000000001111b95
[ 0.271290] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.271353] cma: cma_alloc(): returned 00000000ea78d172
[ 0.271371] cma: cma_alloc(cma 000000008523c27c, count 17, align 5)
[ 0.271384] cma: cma_alloc(): returned 000000007a5476a6
[ 0.271402] cma: cma_alloc(cma 000000008523c27c, count 34, align 6)
[ 0.271416] cma: cma_alloc(): returned 00000000933505c6
[ 0.271449] cma: cma_alloc(cma 000000008523c27c, count 34, align 6)
[ 0.271470] cma: cma_alloc(): returned 0000000080f2b4b5
[ 0.271504] cma: cma_alloc(cma 000000008523c27c, count 9, align 4)
[ 0.271517] cma: cma_alloc(): returned 000000001dad4b40
[ 0.271531] cma: cma_alloc(cma 000000008523c27c, count 9, align 4)
[ 0.271545] cma: cma_alloc(): returned 00000000a3666505
[ 0.271557] cma: cma_alloc(cma 000000008523c27c, count 9, align 4)
[ 0.271570] cma: cma_alloc(): returned 000000004dc2a377
[ 0.271582] cma: cma_alloc(cma 000000008523c27c, count 9, align 4)
[ 0.271596] cma: cma_alloc(): returned 000000007d336913
[ 0.271607] cma: cma_alloc(cma 000000008523c27c, count 9, align 4)
[ 0.271626] cma: cma_alloc(): returned 0000000079509aeb
[ 0.271638] cma: cma_alloc(cma 000000008523c27c, count 9, align 4)
[ 0.271652] cma: cma_alloc(): returned 0000000077cd157c
[ 0.271663] cma: cma_alloc(cma 000000008523c27c, count 18, align 5)
[ 0.271679] cma: cma_alloc(): returned 00000000b93c5da0
[ 0.271698] cma: cma_alloc(cma 000000008523c27c, count 18, align 5)
[ 0.271737] cma: cma_alloc(): returned 0000000084191892
[ 0.271756] cma: cma_alloc(cma 000000008523c27c, count 1, align 0)
[ 0.271770] cma: cma_alloc(): returned 000000001681452f
[ 0.271776] cma: cma_alloc(cma 000000008523c27c, count 1, align 0)
[ 0.271790] cma: cma_alloc(): returned 0000000063ef874c
[ 0.271794] cma: cma_alloc(cma 000000008523c27c, count 1, align 0)
[ 0.271809] cma: cma_alloc(): returned 00000000f8739632
[ 0.271813] cma: cma_alloc(cma 000000008523c27c, count 1, align 0)
[ 0.271828] cma: cma_alloc(): returned 000000002e9a8c22
[ 0.271832] cma: cma_alloc(cma 000000008523c27c, count 72, align 7)
[ 0.271854] cma: cma_alloc(): returned 0000000018463008
[ 0.271920] cma: cma_alloc(cma 000000008523c27c, count 72, align 7)
[ 0.272027] cma: cma_alloc(): returned 00000000c94a4d11
[ 0.272087] cma: cma_alloc(cma 000000008523c27c, count 6, align 3)
[ 0.272104] cma: cma_alloc(): returned 0000000070e98f96
[ 0.272116] cma: cma_alloc(cma 000000008523c27c, count 6, align 3)
[ 0.272132] cma: cma_alloc(): returned 000000000df0a48f
[ 0.272143] cma: cma_alloc(cma 000000008523c27c, count 6, align 3)
[ 0.272159] cma: cma_alloc(): returned 00000000c4730781
[ 0.272169] cma: cma_alloc(cma 000000008523c27c, count 6, align 3)
[ 0.272185] cma: cma_alloc(): returned 00000000ac5d8d20
[ 0.272197] cma: cma_alloc(cma 000000008523c27c, count 6, align 3)
[ 0.272213] cma: cma_alloc(): returned 000000000d44ac76
[ 0.272222] cma: cma_alloc(cma 000000008523c27c, count 6, align 3)
[ 0.272239] cma: cma_alloc(): returned 00000000de2f1c36
[ 0.272249] cma: cma_alloc(cma 000000008523c27c, count 8, align 3)
[ 0.272266] cma: cma_alloc(): returned 00000000128d97a4
[ 0.272277] cma: cma_alloc(cma 000000008523c27c, count 8, align 3)
[ 0.272294] cma: cma_alloc(): returned 00000000d5b1479c
[ 0.272305] cma: cma_alloc(cma 000000008523c27c, count 108, align 7)
[ 0.272312] cma: cma_alloc(): returned 000000002fb2616e
[ 0.272546] KPI: Bootloader start count = 62911
[ 0.272548] KPI: Bootloader end count = 267305
[ 0.272550] KPI: Bootloader load kernel count = 2381900978
[ 0.272552] KPI: Kernel MPM timestamp = 281464
[ 0.272553] KPI: Kernel MPM Clock frequency = 32768
[ 0.272560] socinfo_print: v0.15, id=443, ver=1.1, raw_id=329, raw_ver=1, hw_plat=34, hw_plat_ver=65536\x0a accessory_chip=0, hw_plat_subtype=1, pmic_model=65576, pmic_die_revision=131072 foundry_id=3 serial_number=2746456008 num_pmics=2 chip_family=0x67 raw_device_family=0x6 raw_device_number=0xe nproduct_id=0x416 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0xc ndefective_parts_array_offset=0xb4 nmodem_supported=0xff
[ 0.272571] Failed to setup PIL ipc logging
[ 0.272573] msm_bus_fabric_rpmh_init_driver
[ 0.272639] msm_bus: Probe started
[ 0.272874] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.272880] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.272891] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.272902] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.272911] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.273443] msm_bus: DT Parsing complete
[ 0.280050] mem-offline: System booted with no zone movable memory blocks. Cannot perform memory offlining
[ 0.280238] wide_ldo_dvdd_regulator: supplied by pm6150_s5
[ 0.280279] wide_ldo_dvdd2_regulator: supplied by pm6150l_s8
[ 0.280312] depth_ldo_avdd_regulator: supplied by pm6150l_bob
[ 0.280350] ultra_ldo_dvdd_regulator: supplied by pm6150_s5
[ 0.280391] front_ldo_dvdd_regulator: supplied by pm6150_s5
[ 0.280681] arm-smmu 5040000.arm,smmu-kgsl: \x09non-coherent table walk
[ 0.280683] arm-smmu 5040000.arm,smmu-kgsl: \x09(IDR0.CTTW overridden by FW configuration)
[ 0.280687] arm-smmu 5040000.arm,smmu-kgsl: \x09stream matching with 5 register groups
[ 0.281897] register_client_adhoc:find path.src 161 dest 627
[ 0.281962] register_client_adhoc:Client handle 1 apps_smmu
[ 0.282054] arm-smmu 15000000.apps-smmu: \x09non-coherent table walk
[ 0.282055] arm-smmu 15000000.apps-smmu: \x09(IDR0.CTTW overridden by FW configuration)
[ 0.282057] arm-smmu 15000000.apps-smmu: \x09stream matching with 71 register groups
[ 0.282548] register_client_adhoc:find path.src 161 dest 627
[ 0.282590] register_client_adhoc:Client handle 2 apps_smmu
[ 0.282640] register_client_adhoc:find path.src 161 dest 627
[ 0.282678] register_client_adhoc:Client handle 3 apps_smmu
[ 0.282733] register_client_adhoc:find path.src 22 dest 773
[ 0.282752] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu
[ 0.282800] register_client_adhoc:find path.src 137 dest 772
[ 0.282819] register_client_adhoc:Client handle 5 mnoc_sf_0_tbu
[ 0.282860] register_client_adhoc:find path.src 161 dest 627
[ 0.282900] register_client_adhoc:Client handle 6 apps_smmu
[ 0.282940] register_client_adhoc:find path.src 154 dest 10076
[ 0.282954] register_client_adhoc:Client handle 7 apps_smmu
[ 0.283236] vgaarb: loaded
[ 0.283343] qcom,qpnp-misc c440000.qcom,spmi:qcom,pm6150@0:qcom,misc@900: probe successful
[ 0.283589] SCSI subsystem initialized
[ 0.283627] usbcore: registered new interface driver usbfs
[ 0.283634] usbcore: registered new interface driver hub
[ 0.283643] usbcore: registered new device driver usb
[ 0.283802] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not found, using dummy regulator
[ 0.283917] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
[ 0.283939] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from KPDPWR_N (Long Power Key Hold)
[ 0.284030] input: qpnp_pon as /devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pm6150@0:qcom,power-on@800/input/input0
[ 0.284831] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150l@4:qcom,power-on@800: PMIC@SID4 Power-on reason: Triggered from PON1 (Secondary PMIC) and 'cold' boot
[ 0.284853] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150l@4:qcom,power-on@800: PMIC@SID4: Power-off reason: Triggered from SOFT (Software)
[ 0.284964] media: Linux media interface: v0.10
[ 0.284969] Linux video capture interface: v2.00
[ 0.284980] pps_core: LinuxPPS API ver. 1 registered
[ 0.284981] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.284984] PTP clock support registered
[ 0.287055] tsens_tm_probe : unable to create IPC Logging 0 for tsens 0x000000000c263000
[ 0.287058] tsens_tm_probe : unable to create IPC Logging 1 for tsens 0x000000000c263000
[ 0.287060] tsens_tm_probe : unable to create IPC Logging 2 for tsens 0x000000000c263000
[ 0.287677] tsens_tm_probe : unable to create IPC Logging 0 for tsens 0x000000000c265000
[ 0.287680] tsens_tm_probe : unable to create IPC Logging 1 for tsens 0x000000000c265000
[ 0.287681] tsens_tm_probe : unable to create IPC Logging 2 for tsens 0x000000000c265000
[ 0.288508] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@9e000000
[ 0.288544] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
[ 0.288588] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
[ 0.288642] ION heap system created
[ 0.288770] ION heap qsecom created at 0x000000009e000000 with size 1400000
[ 0.288773] ION heap qsecom_ta created at 0x00000000f6000000 with size 1000000
[ 0.288776] ION heap secure_heap created
[ 0.288777] ION heap secure_display created at 0x00000000f7000000 with size 8c00000
[ 0.300203] platform soc:qcom,ion:qcom,ion-heap@14: ion_secure_carveout: creating heap@0x9f400000, size 0x1e00000
[ 0.300205] ION heap secure_carveout created
[ 0.300472] qupv3_geni_se 8c0000.qcom,qupv3_0_geni_se: geni_se_probe Failed to allocate log context
[ 0.300656] qupv3_geni_se ac0000.qcom,qupv3_1_geni_se: geni_se_probe Failed to allocate log context
[ 0.300970] PMIC@SID0: PM6150 v2.0 options: 0, 0, 0, 0
[ 0.301069] PMIC@SID4: PM8150L v3.0 options: 0, 0, 0, 0
[ 0.301527] register_client_adhoc:find path.src 90 dest 512
[ 0.301655] register_client_adhoc:find path.src 90 dest 585
[ 0.301693] register_client_adhoc:find path.src 1 dest 676
[ 0.301755] register_client_adhoc:find path.src 143 dest 777
[ 0.301774] register_client_adhoc:Client handle 8 ipa
[ 0.303557] ipa ipa3_smp2p_probe:8685 fail to get smp2p clk resp bit -517
[ 0.304986] ipa ipa3_smp2p_probe:8685 fail to get smp2p clk resp bit -517
[ 0.306085] Advanced Linux Sound Architecture Driver Initialized.
[ 0.306449] Bluetooth: Core ver 2.22
[ 0.306469] NET: Registered protocol family 31
[ 0.306471] Bluetooth: HCI device and connection manager initialized
[ 0.306480] Bluetooth: HCI socket layer initialized
[ 0.306483] Bluetooth: L2CAP socket layer initialized
[ 0.306491] Bluetooth: SCO socket layer initialized
[ 0.306936] NetLabel: Initializing
[ 0.306939] NetLabel: domain hash size = 128
[ 0.306941] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.306982] NetLabel: unlabeled traffic allowed by default
[ 0.307030] pcie:pcie_init.
[ 0.307033] pcie_init: unable to create IPC log context for pcie0-short
[ 0.307036] pcie_init: unable to create IPC log context for pcie0-long
[ 0.307038] pcie_init: unable to create IPC log context for pcie0-dump
[ 0.307041] pcie_init: unable to create IPC log context for pcie1-short
[ 0.307042] pcie_init: unable to create IPC log context for pcie1-long
[ 0.307043] pcie_init: unable to create IPC log context for pcie1-dump
[ 0.307046] pcie_init: unable to create IPC log context for pcie2-short
[ 0.307047] pcie_init: unable to create IPC log context for pcie2-long
[ 0.307049] pcie_init: unable to create IPC log context for pcie2-dump
[ 0.307051] pcie_init: unable to create IPC log context for pcie3-short
[ 0.307052] pcie_init: unable to create IPC log context for pcie3-long
[ 0.307054] pcie_init: unable to create IPC log context for pcie3-dump
[ 0.308258] register_client_adhoc:find path.src 22 dest 512
[ 0.308449] register_client_adhoc:Client handle 9 bus-proxy-client
[ 0.309505] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully registered! lcdb_en=1 ldo_voltage=5500mV ncp_voltage=5500mV bst_voltage=5650mV
[ 0.309556] sched-energy energy-costs: cpu=0 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.309559] sched-energy energy-costs: cpu=1 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.309562] sched-energy energy-costs: cpu=2 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.309565] sched-energy energy-costs: cpu=3 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.309567] sched-energy energy-costs: cpu=4 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.309569] sched-energy energy-costs: cpu=5 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.309573] sched-energy energy-costs: cpu=6 eff=1740 [freq=652800 cap=288 power_d0=242] -> [freq=2400000 cap=1024 power_d0=2568]
[ 0.309576] sched-energy energy-costs: cpu=7 eff=1740 [freq=652800 cap=288 power_d0=242] -> [freq=2400000 cap=1024 power_d0=2568]
[ 0.309578] sched-energy energy-costs: Sched-energy-costs capacity updated
[ 0.309654] gpu_gx_gdsc: supplied by pm6150_s2_level
[ 0.309787] ipa ipa3_smp2p_probe:8685 fail to get smp2p clk resp bit -517
[ 0.309903] clocksource: Switched to clocksource arch_sys_counter
[ 0.309974] VFS: Disk quotas dquot_6.6.0
[ 0.309994] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.310712] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 0.310715] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
[ 0.311189] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=0, clocks successfully
[ 0.311306] mdss_pll_probe: MDSS pll label = MDSS DP PLL
[ 0.312237] NET: Registered protocol family 2
[ 0.312357] IP idents hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.312938] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.313029] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.313221] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.313275] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.313308] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.313381] NET: Registered protocol family 1
[ 0.313391] PCI: CLS 0 bytes, default 128
[ 0.313746] ipa ipa3_smp2p_probe:8685 fail to get smp2p clk resp bit -517
[ 0.313869] Trying to unpack rootfs image as initramfs...
[ 0.682186] Freeing initrd memory: 28352K
[ 0.682907] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.686998] audit: initializing netlink subsys (disabled)
[ 0.687105] audit: type=2000 audit(0.679:1): state=initialized audit_enabled=0 res=1
[ 0.687166] Initialise system trusted keyrings
[ 0.687260] workingset: timestamp_bits=45 max_order=20 bucket_order=0
[ 0.687984] [SDFAT] Filesystem version 2.3.0
[ 0.688202] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.688228] fuse init (API version 7.27)
[ 0.688324] SELinux: Registering netfilter hooks
[ 0.693183] Key type asymmetric registered
[ 0.693186] Asymmetric key parser 'x509' registered
[ 0.693209] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)
[ 0.693212] io scheduler noop registered
[ 0.693213] io scheduler deadline registered
[ 0.693223] io scheduler cfq registered (default)
[ 0.693224] io scheduler mq-deadline registered
[ 0.693225] io scheduler kyber registered
[ 0.700583] icnss: Unable to create log context
[ 0.700588] icnss: Unable to create log long context
[ 0.701081] icnss: Recursive recovery allowed for WLAN
[ 0.701146] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
[ 0.701180] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
[ 0.701201] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
[ 0.704939] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
[ 0.705049] icnss: Unable to create debugfs -19
[ 0.705107] icnss: Platform driver probed successfully
[ 0.705213] register_client_adhoc:find path.src 129 dest 512
[ 0.705252] register_client_adhoc:Client handle 10 pil-modem
[ 0.705259] register_client_adhoc:find path.src 125 dest 512
[ 0.705356] register_client_adhoc:Client handle 11 scm_pas
[ 0.705556] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be dumped.
[ 0.705587] subsys-restart: __get_smem_state(): Could not get smem-states qcom,force-stop
[ 0.705756] register_client_adhoc:find path.src 154 dest 10076
[ 0.705772] register_client_adhoc:Client handle 12 pil-cdsp
[ 0.706065] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
[ 0.706155] register_client_adhoc:find path.src 63 dest 512
[ 0.706229] register_client_adhoc:Client handle 13 pil-venus
[ 0.706234] subsys-pil-tz aae0000.qcom,venus: for venus segments only will be dumped.
[ 0.706323] subsys-pil-tz soc:qcom,kgsl-hyp: for a615_zap segments only will be dumped.
[ 0.707329] smp2p_sleepstate soc:qcom,smp2p_sleepstate: got smp2p-sleepstate-in irq 425
[ 0.708207] register_client_adhoc:find path.src 183 dest 816
[ 0.708253] register_client_adhoc:find path.src 151 dest 512
[ 0.708351] register_client_adhoc:Client handle 14 8c0000.qcom,qupv3_0_geni_se
[ 0.708634] msm_geni_serial 88c000.qcom,qup_uart: Wakeup byte 0xfd
[ 0.708678] msm_geni_serial 88c000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
[ 0.708683] msm_geni_serial 88c000.qcom,qup_uart: Failed to create dbg dir
[ 0.708685] msm_geni_serial 88c000.qcom,qup_uart: Err in Rx IPC Log
[ 0.708687] msm_geni_serial 88c000.qcom,qup_uart: Err in Tx IPC Log
[ 0.708688] msm_geni_serial 88c000.qcom,qup_uart: Err in Pwr IPC Log
[ 0.708690] msm_geni_serial 88c000.qcom,qup_uart: Err in Misc IPC Log
[ 0.708953] 88c000.qcom,qup_uart: ttyHS0 at MMIO 0x88c000 (irq = 205, base_baud = 0) is a MSM
[ 0.709145] msm_geni_serial_init: Driver initialized
[ 0.709226] register_client_adhoc:find path.src 1 dest 618
[ 0.709310] register_client_adhoc:Client handle 15 msm-rng-noc
[ 0.711618] diag: Pcie registration initiated for id: 0
[ 0.711766] diag: diag_pcie_register: failed registering pcie channels
[ 0.711768] diag: MUX: unable to register pcie operations for proc: 0, err: -22
[ 0.711769] diag: MUX: unable to register PCIe operations, continuing with USB registrations for proc: 0, err: -22
[ 0.716804] register_client_adhoc:find path.src 20003 dest 20515
[ 0.716851] register_client_adhoc:Client handle 16 disp_rsc_mnoc
[ 0.716862] register_client_adhoc:find path.src 20001 dest 20513
[ 0.716884] register_client_adhoc:Client handle 17 disp_rsc_llcc
[ 0.716891] register_client_adhoc:find path.src 20000 dest 20512
[ 0.716913] register_client_adhoc:Client handle 18 disp_rsc_ebi
[ 0.717020] [sde_rsc_hw:rsc_hw_init_v3:538]: sde rsc init successfully done
[ 0.717052] [sde_rsc:sde_rsc_probe:1911]: sde rsc index:0 probed successfully
[ 0.717313] dsi_phy ae94400.qcom,mdss_dsi_phy0: ae94400.qcom,mdss_dsi_phy0 supply gdsc not found, using dummy regulator
[ 0.717327] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
[ 0.717540] AXI: get_pdata(): Error: Client name not found
[ 0.717541] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 0.717543] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0
[ 0.717706] OF: graph: no port node found in /soc/qcom,dsi-display
[ 0.717720] msm-dsi-panel:[dsi_panel_parse_triggers:1151] [nt36675 video mode dsi tianma panel] fallback to default te-pin-select
[ 0.717730] msm-dsi-panel:[dsi_panel_parse_panel_mode:1669] dsi_panel_parse_panel_mode: panel operating mode switch feature disabled
[ 0.717739] msm-dsi-panel:[dsi_panel_parse_qsync_caps:1352] [nt36675 video mode dsi tianma panel] qsync min fps not defined rc:-22
[ 0.717750] msm-dsi-panel:[dsi_panel_parse_reset_sequence:2041] RESET SEQ LENGTH = 24
[ 0.717766] msm-dsi-panel:[dsi_panel_parse_misc_features:2091] dsi_panel_parse_misc_features: ulps feature disabled
[ 0.717769] msm-dsi-panel:[dsi_panel_parse_misc_features:2097] dsi_panel_parse_misc_features: ulps during suspend feature disabled
[ 0.719150] register_client_adhoc:find path.src 1 dest 590
[ 0.719465] register_client_adhoc:Client handle 19 mdss_reg
[ 0.719496] register_client_adhoc:find path.src 22 dest 512
[ 0.719674] register_client_adhoc:Client handle 20 mdss_sde
[ 0.719728] [drm:sde_dbg_init:5230] evtlog_status: enable:3, panic:1, dump:2
[ 0.719755] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops sde_wb_comp_ops)
[ 0.719953] msm-dsi-display:[dsi_display_bind] Successfully bind display panel 'dsi_nt36675_tianma_vid_display'
[ 0.720001] genirq: irq_chip msmgpio-dc did not update eff. affinity mask of irq 237
[ 0.720105] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display (ops dsi_display_comp_ops)
[ 0.720115] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops sde_rsc_comp_ops)
[ 0.720146] [drm] mapped mdp address space @00000000cc8ecc93
[ 0.720159] msm_drm ae00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys
[ 0.720194] [drm:_sde_kms_get_splash_data:3311] splash mem num_regions:1
[ 0.720209] [drm:_sde_kms_get_splash_data:3346] splash mem for disp:1 add:9c000000 size:1700000
[ 0.720739] [drm:sde_kms_hw_init:3492] sde hardware revision:0x60020000
[ 0.721649] [drm] Created domain mdp_ns [80000000,80000000] secure=0
[ 0.722670] [drm] probing device qcom,smmu_sde_sec
[ 0.722681] [drm] Created domain mdp_s [80000000,80000000] secure=1
[ 0.725384] [drm:reg_dmav1_init_sspp_op_v4] *ERROR* invalid feature map 12 for feature 31
[ 0.726265] [drm:reg_dmav1_init_sspp_op_v4] *ERROR* invalid feature map 12 for feature 31
[ 0.726741] 97 to big cluster
[ 0.726859] 97 to big cluster
[ 0.726947] 134 to little cluster
[ 0.727044] 134 to little cluster
[ 0.727162] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.727167] [drm] No driver support for vblank timestamp query.
[ 0.727445] [drm] Initialized msm_drm 1.2.0 20130625 for ae00000.qcom,mdss_mdp on minor 0
[ 0.727512] msm-dsi-panel:[dsi_panel_parse_topology:2871] default topology: lm: 1 comp_enc:0 intf: 1
[ 0.727583] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:2961] partial update disabled as the property is not set
[ 0.762799] brd: module loaded
[ 0.763871] loop: module loaded
[ 0.763930] zram: Added device: zram0
[ 0.763931] aw8624 driver version v1.0.9
[ 0.764271] cma: cma_alloc(cma 000000008523c27c, count 1, align 0)
[ 0.764511] cma: cma_alloc(): returned 00000000ec40b2f9
[ 0.764550] cma: cma_alloc(cma 000000008523c27c, count 60, align 6)
[ 0.764638] cma: cma_alloc(): returned 0000000098d9604c
[ 0.764727] cma: cma_alloc(cma 000000008523c27c, count 60, align 6)
[ 0.764834] cma: cma_alloc(): returned 00000000b3f0098c
[ 0.764914] cma: cma_alloc(cma 000000008523c27c, count 5, align 3)
[ 0.764995] cma: cma_alloc(): returned 00000000bba46148
[ 0.765011] cma: cma_alloc(cma 000000008523c27c, count 4, align 2)
[ 0.765089] cma: cma_alloc(): returned 000000007e239255
[ 0.765107] cma: cma_alloc(cma 000000008523c27c, count 1, align 0)
[ 0.765185] cma: cma_alloc(): returned 0000000023a56b0f
[ 0.765393] register_client_adhoc:find path.src 26 dest 512
[ 0.765584] register_client_adhoc:Client handle 21 grp3d
[ 0.765605] register_client_adhoc:find path.src 26 dest 10036
[ 0.765736] register_client_adhoc:Client handle 22 cnoc
[ 0.765743] query_client_usecase_all: query_start
[ 0.765799] query_client_usecase_all: query_start
[ 0.768705] cma: cma_alloc(cma 000000008523c27c, count 1, align 0)
[ 0.768836] cma: cma_alloc(): returned 0000000059c2fba8
[ 0.771162] cma: cma_alloc(cma 000000008523c27c, count 8, align 3)
[ 0.771291] cma: cma_alloc(): returned 0000000040ff2d0e
[ 0.779339] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1400000
[ 0.779348] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[ 0.779351] QSEECOM: qseecom_probe: no-clock-support=0x1
[ 0.779353] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
[ 0.779357] AXI: get_pdata(): Error: Client name not found
[ 0.779359] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 0.779387] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
[ 0.779587] QSEECOM: qseecom_probe: Unable to register bus client
[ 0.779937] [nq-nci] NFC not supported on the board!
[ 0.780065] register_client_adhoc:find path.src 125 dest 512
[ 0.780200] register_client_adhoc:Client handle 23 qcedev-noc
[ 0.780361] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ
[ 0.780811] qce 1de0000.qcedev: QTI Crypto 5.5.1 device found @0x1de0000
[ 0.780824] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000001dc4000
[ 0.780825] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000001dc4000
[ 0.780827] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000001dc4000
[ 0.780829] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000001dc4000
[ 0.780831] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000001dc4000
[ 0.780832] sps:BAM 0x0000000001dc4000 is registered.
[ 0.780885] sps:BAM 0x0000000001dc4000 (va:0x000000005f73db2a) enabled: ver:0x27, number of pipes:16
[ 0.780953] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 9
[ 0.781504] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_ns_cb and create mapping
[ 0.781506] qcedev_setup_context_bank Context Bank name:ns_context, is_secure:0, start_addr:0x60000000
[ 0.782419] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_s_cb and create mapping
[ 0.782421] qcedev_setup_context_bank Context Bank name:secure_context, is_secure:1, start_addr:0xa0000000
[ 0.782957] register_client_adhoc:find path.src 125 dest 512
[ 0.783092] register_client_adhoc:Client handle 24 qcrypto-noc
[ 0.783222] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ
[ 0.783658] qcrypto 1de0000.qcrypto: QTI Crypto 5.5.1 device found @0x1de0000
[ 0.783759] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 9
[ 0.784014] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
[ 0.784111] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
[ 0.784202] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
[ 0.784301] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
[ 0.784451] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
[ 0.784541] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
[ 0.784642] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
[ 0.784732] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
[ 0.784861] qcrypto 1de0000.qcrypto: qcrypto-sha1
[ 0.784961] qcrypto 1de0000.qcrypto: qcrypto-sha256
[ 0.785056] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[ 0.785143] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[ 0.785231] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[ 0.785318] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[ 0.785412] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[ 0.785499] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[ 0.785589] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
[ 0.785677] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
[ 0.785763] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
[ 0.785851] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
[ 0.786251] SCSI Media Changer driver v0.25
[ 0.786713] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 0.787423] register_client_adhoc:find path.src 123 dest 512
[ 0.787816] register_client_adhoc:find path.src 1 dest 757
[ 0.788007] register_client_adhoc:Client handle 25 ufshc_mem
[ 0.788262] ufshcd-qcom 1d84000.ufshc: ufs_qcom_parse_reg_info: Unable to find qcom,vccq-parent-supply regulator, assuming enabled
[ 0.788303] cma: cma_alloc(cma 000000008523c27c, count 24, align 5)
[ 0.788454] cma: cma_alloc(): returned 000000000bf09457
[ 0.788483] cma: cma_alloc(cma 000000008523c27c, count 1, align 0)
[ 0.788569] cma: cma_alloc(): returned 00000000353f552f
[ 0.788584] cma: cma_alloc(cma 000000008523c27c, count 1, align 0)
[ 0.788665] cma: cma_alloc(): returned 00000000ab12e521
[ 0.788847] scsi host0: ufshcd
[ 0.810485] register_client_adhoc:find path.src 184 dest 817
[ 0.810571] register_client_adhoc:find path.src 152 dest 512
[ 0.810831] register_client_adhoc:Client handle 26 ac0000.qcom,qupv3_1_geni_se
[ 0.812565] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 0.813780] tun: Universal TUN/TAP device driver, 1.6
[ 0.813818] sky2: driver version 1.30
[ 0.814357] PPP generic driver version 2.4.2
[ 0.814403] PPP BSD Compression module registered
[ 0.814408] PPP Deflate Compression module registered
[ 0.814441] PPP MPPE Compression module registered
[ 0.814446] NET: Registered protocol family 24
[ 0.814465] PPTP driver version 0.8.5
[ 0.814636] wcnss_pre_alloc_init: Failed to create debugfs dir
[ 0.814641] cnss_utils: Unable to create debugfs -19
[ 0.814644] CLD80211: Initializing
[ 0.814721] usbcore: registered new interface driver r8152
[ 0.814740] usbcore: registered new interface driver asix
[ 0.814823] usbcore: registered new interface driver ax88179_178a
[ 0.814842] usbcore: registered new interface driver cdc_ether
[ 0.814859] usbcore: registered new interface driver net1080
[ 0.814876] usbcore: registered new interface driver cdc_subset
[ 0.814896] usbcore: registered new interface driver zaurus
[ 0.814900] usbnet_init: Error getting ipc_log_ctxt
[ 0.814902] usbnet_init: Error getting ipc_log_ctxt
[ 0.814905] usbnet_init: Error getting ipc_log_ctxt
[ 0.814926] usbcore: registered new interface driver cdc_ncm
[ 0.815032] cma: cma_alloc(cma 000000008523c27c, count 514, align 8)
[ 0.815542] cma: cma_alloc(): returned 000000005a78322c
[ 0.818387] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[ 0.820153] msm-qusb-phy-v2 88e3000.qusb: can't create debugfs root for 88e3000.qusb
[ 0.821528] msm-dwc3 a600000.ssusb: USB core frequency = 133333333
[ 0.821568] msm-dwc3 a600000.ssusb: setting lpm_to_suspend_delay to zero.
[ 0.822162] msm-dwc3 a600000.ssusb: IOMMU mapping created: 00000000cbfbd502
[ 0.822478] msm-dwc3 a600000.ssusb: attached to IOMMU
[ 0.823024] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_ALLOC
[ 0.823079] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 0.823350] dwc3 a600000.dwc3: Error getting ipc_log_ctxt
[ 0.823376] dwc3 a600000.dwc3: Error getting ipc_log_ctxt for ep_events
[ 0.823802] register_client_adhoc:find path.src 61 dest 512
[ 0.824184] register_client_adhoc:find path.src 61 dest 676
[ 0.824356] register_client_adhoc:find path.src 1 dest 583
[ 0.824546] register_client_adhoc:Client handle 27 usb0
[ 0.824642] msm-dwc3 a600000.ssusb: setting pm-qos-latency to zero.
[ 0.825493] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_FREE
[ 0.827055] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.827060] ehci-pci: EHCI PCI platform driver
[ 0.827081] ehci-platform: EHCI generic platform driver
[ 0.827401] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.827411] ohci-pci: OHCI PCI platform driver
[ 0.827436] ohci-platform: OHCI generic platform driver
[ 0.828223] usbcore: registered new interface driver usb-storage
[ 0.828244] usbcore: registered new interface driver usb_ehset_test
[ 0.828262] usbcore: registered new interface driver lvs
[ 0.828658] fgsi_init: Err allocating ipc_log_ctxt
[ 0.829595] qpnp-pdphy c440000.qcom,spmi:qcom,pm6150@0:qcom,usb-pdphy@1700: usbpd_create failed: -517
[ 0.830096] usbcore: registered new interface driver xpad
[ 0.830123] [FTS_TS/E]fts_ts_init:Unknown Touch
[ 0.830128] [NVT-ts] nvt_driver_init 2620: start
[ 0.830148] [NVT-ts] nvt_driver_init 2632: TP info: [Vendor]tianma [IC]nt36675
[ 0.830243] [NVT-ts] nvt_ts_probe 1736: start
[ 0.830257] [NVT-ts] nvt_ts_probe 1801: mode=0, max_speed_hz=8000000
[ 0.830265] [NVT-ts] nvt_parse_dt 1134: novatek,irq-gpio=9
[ 0.830270] [NVT-ts] nvt_parse_dt 1141: SWRST_N8_ADDR=0x03F0FE
[ 0.830274] [NVT-ts] nvt_parse_dt 1150: SPI_RD_FAST_ADDR=0x03F310
[ 0.830279] [NVT-ts] nvt_ts_get_regulator 1598: get/put regulator : 1
[ 0.830353] [NVT-ts] nvt_ts_enable_regulator 1669: Already disable touch regulator
[ 0.830646] spi_geni a94000.spi: proto 1
[ 0.830672] spi_geni a94000.spi: tx_fifo 16 rx_fifo 32 tx_width 32
[ 0.843375] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[ 0.855534] [NVT-ts] nvt_ts_check_chip_ver_trim 1548: buf[1]=0x00, buf[2]=0x00, buf[3]=0x01, buf[4]=0x75, buf[5]=0x66, buf[6]=0x03
[ 0.855539] [NVT-ts] nvt_ts_check_chip_ver_trim 1567: This is NVT touch IC
[ 0.855624] input: NVTCapacitiveTouchScreen as /devices/virtual/input/input1
[ 0.855672] [NVT-ts] nvt_ts_probe 1932: int_trigger_type=1
[ 0.855848] [NVT-ts] nvt_irq_enable 285: enable=0, desc->depth=1
[ 0.855852] [NVT-ts] nvt_ts_probe 1941: request irq 235 succeed
[ 0.855985] [NVT-ts] nvt_ts_probe 1961: NVT_TOUCH_ESD_PROTECT is 0
[ 0.855995] [NVT-ts] nvt_flash_proc_init 980: Succeeded!
[ 0.855998] [NVT-ts] nvt_flash_proc_init 983: ============================================================
[ 0.856001] [NVT-ts] nvt_flash_proc_init 984: Create /proc/NVTSPI
[ 0.856004] [NVT-ts] nvt_flash_proc_init 985: ============================================================
[ 0.856011] [NVT-ts] nvt_extra_proc_init 1853: create proc/nvt_fw_version Succeeded!
[ 0.856018] [NVT-ts] nvt_extra_proc_init 1861: create proc/nvt_baseline Succeeded!
[ 0.856024] [NVT-ts] nvt_extra_proc_init 1869: create proc/nvt_raw Succeeded!
[ 0.856029] [NVT-ts] nvt_extra_proc_init 1877: create proc/nvt_diff Succeeded!
[ 0.856033] [NVT-ts] nvt_extra_proc_init 1885: create proc/nvt_pf_switch Succeeded!
[ 0.856038] [NVT-ts] nvt_extra_proc_init 1893: create proc/nvt_sensitivity_switch Succeeded!
[ 0.856042] [NVT-ts] nvt_extra_proc_init 1901: create proc/nvt_er_range_switch Succeeded!
[ 0.856047] [NVT-ts] nvt_extra_proc_init 1909: create proc/nvt_max_power_switch Succeeded!
[ 0.856051] [NVT-ts] nvt_extra_proc_init 1917: create proc/nvt_edge_reject_switch Succeeded!
[ 0.856055] [NVT-ts] nvt_extra_proc_init 1925: create proc/nvt_pocket_palm_switch Succeeded!
[ 0.856058] [NVT-ts] nvt_extra_proc_init 1933: create proc/nvt_charger_switch Succeeded!
[ 0.856157] [NVT-ts] nvt_ts_probe 2038: end
[ 0.856169] [NVT-ts] nvt_irq_enable 285: enable=1, desc->depth=0
[ 0.856174] [NVT-ts] nvt_ts_probe 2057: pm_runtime_get fail!
[ 0.856205] [NVT-ts] nvt_driver_init 2657: finished
[ 0.856862] fpc1020 soc:fpc1020: found pin control fpc1020_reset_reset
[ 0.856867] fpc1020 soc:fpc1020: found pin control fpc1020_reset_active
[ 0.856871] fpc1020 soc:fpc1020: found pin control fpc1020_irq_active
[ 0.867536] fpc1020 soc:fpc1020: IRQ after reset 90=1
[ 0.867543] fpc1020 Create proc entry success!
[ 0.867547] fpc1020 soc:fpc1020: fpc1020_probe: ok
[ 0.867650] fpc1020_init OK
[ 0.867654] gf_spi: hml gf_init failed as fpsensor = 1(2=gdx)
[ 0.868033] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm6150@0:qcom,pm6150_rtc: rtc core: registered qpnp_rtc as rtc0
[ 0.868403] i2c /dev entries driver
[ 0.868535] IR NEC protocol handler initialized
[ 0.868539] IR RC5(x/sz) protocol handler initialized
[ 0.868542] IR RC6 protocol handler initialized
[ 0.868546] IR JVC protocol handler initialized
[ 0.868549] IR Sony protocol handler initialized
[ 0.868552] IR SANYO protocol handler initialized
[ 0.868555] IR Sharp protocol handler initialized
[ 0.868557] IR MCE Keyboard/mouse protocol handler initialized
[ 0.868560] IR XMP protocol handler initialized
[ 0.868756] i2c_geni 880000.i2c: Bus frequency is set to 1000000Hz.
[ 0.869401] i2c_geni 890000.i2c: Bus frequency is set to 400000Hz.
[ 0.869759] aw8624_haptic 1-005a: aw8624_parse_dt: reset gpio provided ok
[ 0.869765] aw8624_haptic 1-005a: aw8624_parse_dt: irq gpio provided ok.
[ 0.900277] aw8624_i2c_read: i2c_read cnt=0 error=-107
[ 0.920246] aw8624_read_chipid aw8624 detected
[ 0.940244] aw8624_interrupt_setup: reg SYSINT=0x0
[ 0.944964] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
[ 0.947230] ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0
[ 0.947233] ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0
[ 0.950848] scsi 0:0:0:49488: Well-known LUN MICRON MT064GASAO2U21 0106 PQ: 0 ANSI: 6
[ 0.960078] scsi 0:0:0:49456: Well-known LUN MICRON MT064GASAO2U21 0106 PQ: 0 ANSI: 6
[ 0.960707] scsi 0:0:0:49476: Well-known LUN MICRON MT064GASAO2U21 0106 PQ: 0 ANSI: 6
[ 0.961335] scsi 0:0:0:0: Direct-Access MICRON MT064GASAO2U21 0106 PQ: 0 ANSI: 6
[ 0.961843] scsi 0:0:0:1: Direct-Access MICRON MT064GASAO2U21 0106 PQ: 0 ANSI: 6
[ 0.962263] scsi 0:0:0:2: Direct-Access MICRON MT064GASAO2U21 0106 PQ: 0 ANSI: 6
[ 0.962682] scsi 0:0:0:3: Direct-Access MICRON MT064GASAO2U21 0106 PQ: 0 ANSI: 6
[ 0.963102] scsi 0:0:0:4: Direct-Access MICRON MT064GASAO2U21 0106 PQ: 0 ANSI: 6
[ 0.963523] scsi 0:0:0:5: Direct-Access MICRON MT064GASAO2U21 0106 PQ: 0 ANSI: 6
[ 0.964055] sd 0:0:0:0: [sda] physical block alignment offset: 131072
[ 0.964395] sd 0:0:0:0: [sda] 67108864-byte physical blocks
[ 0.964554] sd 0:0:0:0: [sda] Write Protect is off
[ 0.964561] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
[ 0.964747] sd 0:0:0:0: [sda] Optimal transfer size 131072 bytes not a multiple of physical block size (67108864 bytes)
[ 0.965583] sd 0:0:0:1: [sdb] Write Protect is off
[ 0.965589] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
[ 0.965625] sd 0:0:0:2: [sdc] Write Protect is off
[ 0.965631] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
[ 0.965845] sd 0:0:0:1: [sdb] Optimal transfer size 131072 bytes
[ 0.965872] sd 0:0:0:2: [sdc] Optimal transfer size 131072 bytes
[ 0.966152] sd 0:0:0:3: [sdd] Write Protect is off
[ 0.966158] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
[ 0.966372] sd 0:0:0:3: [sdd] Optimal transfer size 131072 bytes
[ 0.966686] sd 0:0:0:4: [sde] Write Protect is off
[ 0.966692] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
[ 0.966997] sd 0:0:0:4: [sde] Optimal transfer size 131072 bytes
[ 0.967056] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18
[ 0.968477] sdb: sdb1 sdb2
[ 0.968694] sdc: sdc1 sdc2
[ 0.969054] sd 0:0:0:5: [sdf] Write Protect is off
[ 0.969060] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
[ 0.969366] sd 0:0:0:5: [sdf] Optimal transfer size 131072 bytes
[ 0.969914] sdd: sdd1 sdd2 sdd3
[ 0.969939] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55
[ 0.971336] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
[ 1.122196] aw8624_haptic_read_f0 f0=2005
[ 1.122554] aw8624_haptic_read_beme max_pos_beme=76
[ 1.122555] aw8624_haptic_read_beme max_neg_beme=171
[ 1.123151] aw8624->f0_calib_data=55
[ 1.123449] aw8624_haptic_f0_calibration final trim_lra=0x37
[ 1.144225] aw8624_haptic_stop_delay do not enter standby automatically
[ 1.146229] input: qti-haptics as /devices/platform/soc/890000.i2c/i2c-1/1-005a/input/input2
[ 1.146272] aw8624_i2c_probe probe completed successfully!
[ 1.146503] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-qos-lut : doesn't exist in device tree
[ 1.146508] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-danger-lut : doesn't exist in device tree
[ 1.146513] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-safe-lut : doesn't exist in device tree
[ 1.146575] register_client_adhoc:find path.src 1 dest 590
[ 1.146845] register_client_adhoc:Client handle 27 sde_reg
[ 1.147412] register_client_adhoc:find path.src 25 dest 512
[ 1.147590] register_client_adhoc:Client handle 28 mdss_rotator
[ 1.147602] register_client_adhoc:find path.src 1 dest 590
[ 1.147776] register_client_adhoc:Client handle 29 mdss_rot_reg
[ 1.148040] No change in context(0==0), skip
[ 1.150530] sde_rotator ae00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
[ 1.150735] i2c_geni a8c000.i2c: Bus frequency is set to 100000Hz.
[ 1.151906] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
[ 1.151979] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
[ 1.158513] PMIC@SID0: (null) v2.0 options: 0, 0, 0, 0
[ 1.158667] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful
[ 1.159018] register_client_adhoc:find path.src 154 dest 512
[ 1.159254] register_client_adhoc:find path.src 154 dest 620
[ 1.159499] register_client_adhoc:Client handle 30 9900000.qcom,msm_npu
[ 1.159504] NPU_INFO: npu_parse_dt_bw: 1635 NPU BW client sets up successfully
[ 1.160517] NPU_INFO: npu_adjust_max_power_level: 1734 Adjust max_pwrlevel to 3[29]
[ 1.161505] NPU_ERR: npu_debugfs_init: 367 debugfs_create_dir for npu failed, error -19
[ 1.162635] msm_vidc: err: Failed to create debugfs for msm_vidc
[ 1.171188] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved memory node camera_region@8e400000
[ 1.172689] register_client_adhoc:find path.src 1 dest 589
[ 1.172986] register_client_adhoc:Client handle 31 cam_ahb
[ 1.173154] register_client_adhoc:find path.src 136 dest 512
[ 1.173333] register_client_adhoc:Client handle 32 cam_hf_1_mnoc
[ 1.173456] register_client_adhoc:find path.src 146 dest 778
[ 1.173496] register_client_adhoc:Client handle 33 cam_hf_1_camnoc
[ 1.173590] register_client_adhoc:find path.src 145 dest 512
[ 1.173762] register_client_adhoc:Client handle 34 cam_hf_2_mnoc
[ 1.173873] register_client_adhoc:find path.src 147 dest 778
[ 1.173910] register_client_adhoc:Client handle 35 cam_hf_2_camnoc
[ 1.174003] register_client_adhoc:find path.src 137 dest 512
[ 1.174178] register_client_adhoc:Client handle 36 cam_sf_1_mnoc
[ 1.174286] register_client_adhoc:find path.src 148 dest 778
[ 1.174323] register_client_adhoc:Client handle 37 cam_sf_1_camnoc
[ 1.177726] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[15][cpas-cdm][0] comp[1024], comp_ab[1024], uncomp[1024]
[ 1.180926] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 1.180932] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 1.180970] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1082 Inval_prms soc_info:00000000b68649f1 hw_intf:00000000846081ae hw_info00000000a35d5f94
[ 1.180974] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1083 controller: 000000005cf8fda0
[ 1.180978] CAM_ERR: CAM-ISP: cam_vfe_core_init: 875 Error! RD cam_vfe_bus_init failed
[ 1.181095] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[9][ife][0] comp[10640000000], comp_ab[10640000000], uncomp[10640000000]
[ 1.182382] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 1.182386] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 1.182417] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1082 Inval_prms soc_info:000000004ef4cfac hw_intf:000000009a280649 hw_info00000000a35d5f94
[ 1.182420] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1083 controller: 00000000c8733fd0
[ 1.182424] CAM_ERR: CAM-ISP: cam_vfe_core_init: 875 Error! RD cam_vfe_bus_init failed
[ 1.182524] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[10][ife][1] comp[10640000000], comp_ab[10640000000], uncomp[10640000000]
[ 1.183591] CAM_ERR: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 525 No clk named ife_dsp_clk found. Dev vfe2
[ 1.183596] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 109 Option clk get failed with rc -14
[ 1.183678] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 1.183682] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 1.183799] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[11][ife][2] comp[10640000000], comp_ab[10640000000], uncomp[10640000000]
[ 1.185940] CAM_INFO: CAM-ISP: cam_isp_dev_probe: 176 Camera ISP probe complete
[ 1.187842] CAM_INFO: CAM: cam_res_mgr_probe: 692 Disable shared gpio support.
[ 1.190160] CAM_INFO: CAM-CCI: cam_cci_platform_probe: 428 Device Type :0
[ 1.190699] CAM_INFO: CAM-CCI: cam_cci_platform_probe: 428 Device Type :1
[ 1.192430] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
[ 1.192470] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
[ 1.192506] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
[ 1.192538] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
[ 1.192570] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
[ 1.201510] CAM_INFO: CAM-JPEG: cam_jpeg_dev_probe: 174 Camera JPEG probe complete
[ 1.203339] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[20][lrmecpas][0] comp[7200000], comp_ab[7200000], uncomp[7200000]
[ 1.203947] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[14][cam-cdm-intf][0] comp[1024], comp_ab[1024], uncomp[1024]
[ 1.205279] usbcore: registered new interface driver uvcvideo
[ 1.205284] USB Video Class driver (1.1.1)
[ 1.206446] ==test qcom,fcc-max-ua:5900000
[ 1.206504] smb en qc3 with cp:1
[ 1.206509] six-pin-step-chg-cfg: 4240000uV, 5900000uA
[ 1.206512] six-pin-step-chg-cfg: 4440000uV, 4800000uA
[ 1.206515] six-pin-step-chg-cfg: 4480000uV, 3800000uA
[ 1.206523] Couldn't parse device tree rc=-517
[ 1.207268] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: parse devicetree failed, rc=-517
[ 1.207309] [Onewire] onewire_gpio_init: onewire gpio init entry.
[ 1.207660] [Onewire] onewire_gpio_probe: onewire probe entry
[ 1.207761] [Onewire] onewire_gpio_probe: onewire_gpio_level_addr is 395d004; onewire_gpio_cfg_addr is 395d000
[ 1.207765] [Onewire] onewire_gpio_probe: onewire_data->gpio_cfg_reg is 16b35000; onewire_data->gpio_in_out_reg is 16b2d004
[ 1.207853] [ds28e16] ds28e16_init: ds28e16_init entry.
[ 1.208044] [ds28e16] ds28e16_probe: ds28e16_probe entry.
[ 1.208179] [ds28e16] verify_psy_register: batt_verify power supply register successfully
[ 1.423912] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 1.478826] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 1.490078] [ds28e16] verify_get_property: unsupported property 4
[ 1.490102] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 1.490106] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 0...
[ 1.490218] [ds28e16] DS28E16_standard_cmd_flow: Failed to reset ds28e16!
[ 1.490437] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus22
[ 1.490440] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 1...
[ 1.514745] device-mapper: uevent: version 1.0.3
[ 1.514801] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.515036] bt_dt_parse_vreg_info: qca,bt-vdd-vl: is not provided in device tree
[ 1.515039] bt_dt_parse_vreg_info: qca,bt-vdd-vm: is not provided in device tree
[ 1.515040] bt_dt_parse_vreg_info: qca,bt-vdd-5c: is not provided in device tree
[ 1.515041] bt_dt_parse_vreg_info: qca,bt-vdd-5a: is not provided in device tree
[ 1.515043] bt_dt_parse_vreg_info: qca,bt-vdd-vh: is not provided in device tree
[ 1.515050] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
[ 1.515052] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
[ 1.515054] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
[ 1.515056] bt_power_populate_dt_pinfo: bt-3P3-gpio not provided in devicetree
[ 1.515058] bt_power_populate_dt_pinfo: bt-1P3-gpio not provided in devicetree
[ 1.515059] bt_dt_parse_clk_info: clocks is not provided in device tree
[ 1.515060] bt_power_populate_dt_pinfo: clock not provided in device tree
[ 1.515544] sdhci: Secure Digital Host Controller Interface driver
[ 1.515547] sdhci: Copyright(c) Pierre Ossman
[ 1.515548] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.516070] usbcore: registered new interface driver usbhid
[ 1.516073] usbhid: USB HID core driver
[ 1.516117] ashmem: initialized
[ 1.516131] wlan_hdd_state wlan major(500) initialized
[ 1.516531] bimc-bwmon 90b6300.qcom,cpu-cpu-llcc-bwmon: BW HWmon governor registered.
[ 1.517635] register_client_adhoc:find path.src 81 dest 512
[ 1.518018] register_client_adhoc:find path.src 1 dest 608
[ 1.518215] register_client_adhoc:Client handle 38 sdhc2
[ 1.529458] cma: cma_alloc(cma 000000008523c27c, count 1, align 0)
[ 1.529801] cma: cma_alloc(): returned 0000000072c252eb
[ 1.530216] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using 64-bit ADMA in legacy mode
[ 1.542638] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus11
[ 1.543762] [ds28e16] Read_RomID: getian---Read_RomID22
[ 1.543766] [ds28e16] ds28el16_Read_RomID_retry: getian---ds28el16_Read_RomID_retry00
[ 1.543771] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 1.543786] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 1.543789] [ds28e16] ds28el16_get_page_status_retry: read page status communication start... 0
[ 1.543793] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 1.543796] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 1.543805] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 1.558777] bimc-bwmon 90cd000.qcom,cpu-llcc-ddr-bwmon: BW HWmon governor registered.
[ 1.558866] bimc-bwmon 60400.qcom,npu-npu-ddr-bwmon: BW HWmon governor registered.
[ 1.558907] bimc-bwmon 70300.qcom,npudsp-npu-ddr-bwmon: BW HWmon governor registered.
[ 1.559312] arm-memlat-mon soc:qcom,cpu0-cpu-l3-latmon: Memory Latency governor registered.
[ 1.559327] arm-memlat-mon soc:qcom,cpu6-cpu-l3-latmon: Memory Latency governor registered.
[ 1.559339] arm-memlat-mon soc:qcom,cpu0-cpu-llcc-latmon: Memory Latency governor registered.
[ 1.559351] arm-memlat-mon soc:qcom,cpu6-cpu-llcc-latmon: Memory Latency governor registered.
[ 1.559362] arm-memlat-mon soc:qcom,cpu0-llcc-ddr-latmon: Memory Latency governor registered.
[ 1.559372] arm-memlat-mon soc:qcom,cpu6-llcc-ddr-latmon: Memory Latency governor registered.
[ 1.559386] arm-memlat-mon soc:qcom,cpu0-computemon: Compute governor registered.
[ 1.559396] arm-memlat-mon soc:qcom,cpu6-computemon: Compute governor registered.
[ 1.559903] register_client_adhoc:find path.src 1 dest 770
[ 1.559945] register_client_adhoc:Client handle 39 soc:qcom,cpu-cpu-llcc-bw
[ 1.560274] register_client_adhoc:find path.src 129 dest 512
[ 1.560300] register_client_adhoc:Client handle 40 soc:qcom,cpu-llcc-ddr-bw
[ 1.560620] register_client_adhoc:find path.src 1 dest 770
[ 1.560639] register_client_adhoc:Client handle 41 soc:qcom,cpu0-cpu-llcc-lat
[ 1.560734] register_client_adhoc:find path.src 1 dest 770
[ 1.560751] register_client_adhoc:Client handle 42 soc:qcom,cpu6-cpu-llcc-lat
[ 1.560848] register_client_adhoc:find path.src 129 dest 512
[ 1.560865] register_client_adhoc:Client handle 43 soc:qcom,cpu0-llcc-ddr-lat
[ 1.560964] register_client_adhoc:find path.src 129 dest 512
[ 1.560981] register_client_adhoc:Client handle 44 soc:qcom,cpu6-llcc-ddr-lat
[ 1.561077] register_client_adhoc:find path.src 129 dest 512
[ 1.561096] register_client_adhoc:Client handle 45 soc:qcom,cpu0-cpu-ddr-latfloor
[ 1.561193] register_client_adhoc:find path.src 129 dest 512
[ 1.561211] register_client_adhoc:Client handle 46 soc:qcom,cpu6-cpu-ddr-latfloor
[ 1.561314] register_client_adhoc:find path.src 154 dest 512
[ 1.561369] register_client_adhoc:Client handle 47 soc:qcom,npu-npu-ddr-bw
[ 1.561515] register_client_adhoc:find path.src 154 dest 512
[ 1.561567] register_client_adhoc:Client handle 48 soc:qcom,npudsp-npu-ddr-bw
[ 1.561684] register_client_adhoc:find path.src 1 dest 627
[ 1.561748] register_client_adhoc:Client handle 49 soc:qcom,snoc_cnoc_keepalive
[ 1.561865] register_client_adhoc:find path.src 26 dest 512
[ 1.561903] register_client_adhoc:Client handle 51 soc:qcom,gpubw
[ 1.563374] qcom-llcc-pmu 90cc000.llcc-pmu: Registered llcc_pmu, type: 7
[ 1.563907] usbcore: registered new interface driver snd-usb-audio
[ 1.566362] apr_probe: Unable to create ipc log context
[ 1.697940] mmc0: new high speed SDHC card at address 0001
[ 1.698311] mmcblk0: mmc0:0001 00000 7.44 GiB
[ 1.699157] mmcblk0: p1
[ 1.710073] tas2562: probe of 1-004c failed with error -2
[ 1.746235] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 1.776351] msm-dai-q6-hdmi soc:qcom,msm-dai-q6-hdmi_ms: invalid device ID 24578
[ 1.800869] rmnet_perf_init(): initializing rmnet_perf
[ 1.800875] rmnet_shs_module_init(): Starting rmnet SHS module
[ 1.800920] GACT probability NOT on
[ 1.800925] Mirror/redirect action on
[ 1.800929] netem: version 1.3
[ 1.800931] u32 classifier
[ 1.800931] Actions configured
[ 1.800937] Netfilter messages via NETLINK v0.30.
[ 1.800999] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.801026] ctnetlink v0.93: registering with nfnetlink.
[ 1.801131] xt_time: kernel timezone is -0000
[ 1.801146] wireguard: WireGuard 1.0.20220627 loaded. See www.wireguard.com for information.
[ 1.801147] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 1.801183] gre: GRE over IPv4 demultiplexor driver
[ 1.801185] IPv4 over IPsec tunneling driver
[ 1.801308] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.801928] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 1.802068] Initializing XFRM netlink socket
[ 1.802074] IPsec XFRM device driver
[ 1.802146] NET: Registered protocol family 10
[ 1.802449] Segment Routing with IPv6
[ 1.802467] mip6: Mobile IPv6
[ 1.802471] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.802947] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.803089] NET: Registered protocol family 17
[ 1.803094] NET: Registered protocol family 15
[ 1.803102] Ebtables v2.0 registered
[ 1.803116] l2tp_core: L2TP core driver, V2.0
[ 1.803120] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.803121] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 1.803127] l2tp_netlink: L2TP netlink interface
[ 1.803133] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 1.803134] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 1.803161] sctp: Hash tables configured (bind 256/256)
[ 1.803442] wide_ldo_avdd1_regulator: supplied by pm6150l_bob
[ 1.803556] wide_ldo_avdd2_regulator: supplied by pm6150l_bob
[ 1.803661] ultra_ldo_avdd_regulator: supplied by pm6150l_bob
[ 1.803764] wide_ldo_afvdd_regulator: supplied by pm6150l_bob
[ 1.804131] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be dumped.
[ 1.804255] NPU_WARN: npu_bridge_mbox_work: 1201 NPU fw is not loaded
[ 1.804348] msm-dwc3 a600000.ssusb: USB core frequency = 133333333
[ 1.804359] msm-dwc3 a600000.ssusb: setting lpm_to_suspend_delay to zero.
[ 1.804699] msm-dwc3 a600000.ssusb: IOMMU mapping created: 0000000084a07add
[ 1.804892] msm-dwc3 a600000.ssusb: attached to IOMMU
[ 1.805038] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_ALLOC
[ 1.805061] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 1.805176] dwc3 a600000.dwc3: Error getting ipc_log_ctxt
[ 1.805177] dwc3 a600000.dwc3: Error getting ipc_log_ctxt for ep_events
[ 1.805408] register_client_adhoc:find path.src 61 dest 512
[ 1.805527] register_client_adhoc:find path.src 61 dest 676
[ 1.805584] register_client_adhoc:find path.src 1 dest 583
[ 1.805610] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
[ 1.805625] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x000000000a704000
[ 1.805628] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x000000000a704000
[ 1.805632] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x000000000a704000
[ 1.805635] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x000000000a704000
[ 1.805638] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x000000000a704000
[ 1.805642] sps:BAM 0x000000000a704000 is registered.
[ 1.805646] register_client_adhoc:Client handle 50 usb0
[ 1.805748] msm-dwc3 a600000.ssusb: setting pm-qos-latency to zero.
[ 1.806358] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_FREE
[ 1.806442] ipa_rm ipa_rm_delete_resource:146 IPA RM was not initialized
[ 1.806444] usb_bam_ipa_delete_resources: Failed to delete USB_PROD resource
[ 1.806446] ipa_rm ipa_rm_delete_resource:146 IPA RM was not initialized
[ 1.806447] usb_bam_ipa_delete_resources: Failed to delete USB_CONS resource
[ 1.807425] qpnp-pdphy c440000.qcom,spmi:qcom,pm6150@0:qcom,usb-pdphy@1700: usbpd_create failed: -517
[ 1.807671] QG-K: qg_parse_dt: PMIC subtype 40 Digital major 2
[ 1.807698] QG-K: qg_parse_dt: DT: S2 FIFO length=5 low_vbat_length=2 acc_length=128 acc_interval=100
[ 1.807701] QG-K: qg_parse_dt: DT: OCV timer_expiry =-22min ocv_tol_threshold=-22uV
[ 1.807718] QG-K: qg_parse_dt: DT: cl_min_start_soc=10 cl_max_start_soc=15 cl_min_temp=150 cl_max_temp=500
[ 1.807719] QG-K: qg_parse_dt: DT: vbatt_empty_mv=3100mV vbatt_low_mv=3500mV delta_soc=1 ext-sns=1
[ 1.807730] QG-K: qg_set_wa_flags: wa_flags = 6
[ 1.822409] QG-K: get_batt_id_ohm: batt_id_mv=933, batt_id_ohm=99108
[ 1.822605] [ds28e16] verify_get_property: getian---POWER_SUPPLY_PROP_CHIP_OK
[ 1.822607] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 1.822609] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 0...
[ 1.822610] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 1.822612] [ds28e16] Read_RomID: getian---Read_RomID00
[ 1.822613] [ds28e16] ds28el16_Read_RomID_retry: getian---ds28el16_Read_RomID_retry00
[ 1.822614] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 1.822616] [ds28e16] verify_get_property: getian---flag_mi_romid: 2, flag_mi_status: 1
[ 1.822617] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 1.855675] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 1.910587] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 1.910589] QG-K: qg_load_battery_profile: [Battery Stress Test]:page0 content[A]
[ 1.910595] of_batterydata_get_best_profile: j6b-nvt-5020mah found
[ 1.910733] QG-K: qg_batterydata_init: QG Battery-profile loaded
[ 1.910736] QG-K: qg_load_battery_profile: Read mi,ffc-chg-term-current = -541
[ 1.910739] QG-K: qg_load_battery_profile: profile=j6b-nvt-5020mah FV=4450000uV FCC=5900ma
[ 1.910741] QG-K: qg_setup_battery: battery_missing=0 batt_id_ohm=99108 Ohm profile_loaded=1 profile=j6b-nvt-5020mah
[ 1.910765] QG-K: qg_sanitize_sdam: SDAM valid
[ 1.910875] QG-K: qg_determine_pon_soc: S7_PON_OCV OCV=4086598
[ 1.910886] QG-K: qg_determine_pon_soc: S3_GOOD_OCV OCV=3870356
[ 1.910896] QG-K: qg_determine_pon_soc: S3_LAST_OCV OCV=4100028
[ 1.910907] QG-K: qg_determine_pon_soc: SDAM_PON_OCV OCV=0
[ 1.919347] QG-K: qg_determine_pon_soc: Shutdown: Valid=1 SOC=72 OCV=4102100uV time=135890080secs temp=370, time_now=135890096secs temp_now=369 S7_soc=71
[ 1.919348] QG-K: qg_determine_pon_soc: Using SHUTDOWN_SOC @ PON
[ 1.919350] QG-K: qg_determine_pon_soc: Using SHUTDOWN_SOC @ PON
[ 1.919352] QG-K: qg_determine_pon_soc: v_float=4450000 v_cutoff=3400000 FULL_SOC=99 CUTOFF_SOC=2 calcualte_soc=72 pon_soc=71 shutdown[SDAM_SOC]=72 final soc = 72 ibat = 49438
[ 1.921362] QG-K: qg_determine_pon_soc: using SHUTDOWN_SOC @ PON ocv_uv=4102100uV soc=72
[ 1.921445] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.921658] QG-K: qg_request_interrupt: IRQ qg-vbat-low registered wakeable=1
[ 1.921790] QG-K: qg_request_interrupt: IRQ qg-vbat-empty registered wakeable=1
[ 1.921935] QG-K: qg_request_interrupt: IRQ qg-fifo-done registered wakeable=1
[ 1.922070] QG-K: qg_request_interrupt: IRQ qg-good-ocv registered wakeable=1
[ 1.922140] QG-K: qpnp_qg_probe: QG initialized! battery_profile=j6b-nvt-5020mah SOC=72 QG_subtype=4
[ 1.922289] ==test qcom,fcc-max-ua:5900000
[ 1.922314] smb en qc3 with cp:1
[ 1.922316] six-pin-step-chg-cfg: 4240000uV, 5900000uA
[ 1.922317] six-pin-step-chg-cfg: 4440000uV, 4800000uA
[ 1.922318] six-pin-step-chg-cfg: 4480000uV, 3800000uA
[ 1.922362] PL_DISABLE: CHG_STATE_VOTER,0 voting on of val=1
[ 1.922364] PL_DISABLE: current vote is now 1 voted by CHG_STATE_VOTER,0, previous voted 0
[ 1.922367] PL_DISABLE: PARALLEL_PSY_VOTER,2 voting on of val=1
[ 1.922370] PL_DISABLE: PL_INDIRECT_VOTER,3 voting on of val=1
[ 1.922387] PL_DISABLE: PL_DELAY_VOTER,4 voting on of val=1
[ 1.922670] pm6150_charger: smblib_request_dpdm: enabling DPDM regulator
[ 1.923359] pm6150_charger: smblib_rerun_apsd: re-running APSD
[ 1.923424] pm6150_charger: smblib_set_charge_param: usb otg current limit = 1000000 (0x01)
[ 1.923425] USB_ICL: DEFAULT_VOTER,0 voting off of val=0
[ 1.923427] USB_ICL: current vote is now -22 voted by (null),-22, previous voted -22
[ 1.923429] DC_SUSPEND: DEFAULT_VOTER,0 voting off of val=0
[ 1.923430] DC_SUSPEND: current vote is now 0 voted by DEFAULT_VOTER,0, previous voted 0
[ 1.923441] FCC: HW_LIMIT_VOTER,0 voting on of val=5900000
[ 1.923443] FCC: current vote is now 5900000 voted by HW_LIMIT_VOTER,0, previous voted -22
[ 1.923444] FV: HW_LIMIT_VOTER,0 voting on of val=4480000
[ 1.923445] FV: current vote is now 4480000 voted by HW_LIMIT_VOTER,0, previous voted -22
[ 1.923447] FV: BATT_PROFILE_VOTER,1 voting on of val=4480000
[ 1.923449] FV: NON_FFC_VFLOAT_VOTER,2 voting on of val=4450000
[ 1.923450] FV: current vote is now 4450000 voted by NON_FFC_VFLOAT_VOTER,2, previous voted 4480000
[ 1.923460] pm6150_charger: smblib_set_charge_param: DC input current limit = 100000 (0x02)
[ 1.923549] CHG_DISABLE: DEFAULT_VOTER,0 voting off of val=0
[ 1.923550] CHG_DISABLE: current vote is now 0 voted by DEFAULT_VOTER,0, previous voted 0
[ 1.924029] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.924043] enter sysfs create file thermal
[ 1.924057] [PMIC_DEBUG][usb_plugin_irq_handler]: pd_hard_reset=0
[ 1.924079] pm6150_charger: smblib_set_charge_param: switching frequency = 600 (0x0f)
[ 1.924082] AWAKE: DETACH_DETECT_VOTER,0 voting off of val=0
[ 1.924084] AWAKE: current vote is now 0 voted by DETACH_DETECT_VOTER,0, previous voted 0
[ 1.924086] AWAKE: CHG_AWAKE_VOTER,1 voting on of val=1
[ 1.924087] AWAKE: current vote is now 1 voted by CHG_AWAKE_VOTER,1, previous voted 0
[ 1.924099] chg->start_step_vbat: 4100417
[ 1.924101] AWAKE: PL_DELAY_VOTER,2 voting on of val=1
[ 1.924103] TEMP_CHANGE_IRQ_DISABLE: DEFAULT_VOTER,0 voting off of val=0
[ 1.924104] TEMP_CHANGE_IRQ_DISABLE: current vote is now 0 voted by DEFAULT_VOTER,0, previous voted 0
[ 1.924107] pm6150_charger: smblib_usb_plugin_locked: IRQ: usbin-plugin attached
[ 1.924198] USB_ICL: SW_ICL_MAX_VOTER,3 voting on of val=100000
[ 1.924199] USB_ICL: current vote is now 100000 voted by SW_ICL_MAX_VOTER,3, previous voted -22
[ 1.924201] pm6150_charger: smblib_handle_rp_change: CC change old_mode=0 new_mode=8
[ 1.924202] pm6150_charger: typec_state_change_irq_handler: IRQ: cc-state-change; Type-C SOURCE_HIGH detected
[ 1.924213] pm6150_charger: usb_source_change_irq_handler: APSD_STATUS = 0x00
[ 1.924225] pm6150_charger: usb_source_change_irq_handler: APSD_STATUS = 0x00
[ 1.924256] pm6150_charger: batt_temp_changed_irq_handler: IRQ: determine-initial-status
[ 1.924257] pm6150_charger: wdog_bark_irq_handler: IRQ: determine-initial-status
[ 1.924359] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 1.924770] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 1.924775] PL_ENABLE_INDIRECT: USBIN_I_VOTER,0 voting off of val=0
[ 1.924779] PL_ENABLE_INDIRECT: current vote is now 0 voted by USBIN_I_VOTER,0, previous voted 0
[ 1.924795] pm6150_charger: smblib_set_icl_current: set icl current = 100000
[ 1.924985] USB_ICL_IRQ_DISABLE: USB_SUSPEND_VOTER,0 voting off of val=0
[ 1.924989] USB_ICL_IRQ_DISABLE: current vote is now 0 voted by USB_SUSPEND_VOTER,0, previous voted 0
[ 1.925003] pm6150_charger: smblib_run_aicl: re-running AICL
[ 1.925040] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 1.925053] FCC_MAIN: MAIN_FCC_VOTER,0 voting on of val=5900000
[ 1.925056] FCC_MAIN: current vote is now 5900000 voted by MAIN_FCC_VOTER,0, previous voted -22
[ 1.925201] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 1.925958] of_batterydata_get_best_profile: j6b-nvt-5020mah found
[ 1.928393] pm6150_charger: smblib_set_charge_param: fast charge current = 5900000 (0x76)
[ 1.928411] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 1.928570] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 1.928606] PL_DISABLE: CHG_STATE_VOTER,0 voting off of val=0
[ 1.928635] FCC: BATT_PROFILE_VOTER,1 voting on of val=5900000
[ 1.928670] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 1.928767] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 1.928837] QG-K: qg_scale_soc: SOC scale: Start msoc=72 catch_up_soc=72 delta_soc=1
[ 1.928849] QG-K: scale_soc_stop: SOC scale stopped: msoc=72 catch_up_soc=72
[ 1.929363] ibat_ua =-103454
[ 1.930813] USB_LIMITED_IRQ_DISABLE: CHARGER_TYPE_VOTER,0 voting on of val=1
[ 1.930815] USB_LIMITED_IRQ_DISABLE: current vote is now 1 voted by CHARGER_TYPE_VOTER,0, previous voted 0
[ 1.930818] USB_HDC_IRQ_DISABLE: CHARGER_TYPE_VOTER,0 voting on of val=1
[ 1.930819] USB_HDC_IRQ_DISABLE: current vote is now 1 voted by CHARGER_TYPE_VOTER,0, previous voted 0
[ 1.930821] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 1.930833] pm6150_charger: smblib_set_icl_current: set icl current = 100000
[ 1.931018] pm6150_charger: smblib_run_aicl: re-running AICL
[ 1.931037] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 1.931054] pm6150_charger: smblib_set_prop_typec_power_role: power role change: 1 --> 1!
[ 1.931055] pm6150_charger: smblib_set_prop_typec_power_role: power role already in 1, ignore!
[ 1.931105] SMB5 status - usb:present=1 type=0 batt:present = 1 health = 1 charge = 3
[ 1.931107] QPNP SMB5 probed successfully
[ 1.931268] SMB1398: smb1398_div2_cp_parse_dt: qcom,max-cutoff-soc:90
[ 1.932899] QG_WS: TTF_AWAKE_VOTER,0 voting on of val=1
[ 1.933689] CP_SLAVE_DISABLE: SRC_VOTER,0 voting on of val=1
[ 1.933691] CP_SLAVE_DISABLE: current vote is now 1 voted by SRC_VOTER,0, previous voted 0
[ 1.933693] CP_DISABLE: USER_VOTER,0 voting on of val=1
[ 1.933694] CP_DISABLE: current vote is now 1 voted by USER_VOTER,0, previous voted 0
[ 1.934290] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: disable switcher
[ 1.934293] CP_ILIM: FCC_VOTER,0 voting on of val=2950000
[ 1.934294] CP_ILIM: current vote is now 2950000 voted by FCC_VOTER,0, previous voted -22
[ 1.935046] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 1.935135] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 1.935837] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: set iin_ma = 2950mA
[ 1.935839] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: set CP master ilim to 2950000uA
[ 1.935939] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb1398 DIV2_CP master is probed successfully
[ 1.936294] ibat_ua =-103454
[ 1.940683] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 1.943070] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 1.944266] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.945461] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.946679] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.947873] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.949074] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 1.950336] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 1.950947] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 1.952164] pm6150_charger: smblib_set_prop_system_temp_level: thermal level:0, batt temp:369, thermal_levels:16chg->system_temp_level:0, charger_type:0
[ 1.952169] smblib_set_prop_system_temp_level val=0, chg->system_temp_level=0, LctThermal=0, lct_backlight_off= 0, IsInCall=0 \x0a
[ 1.954105] pm6150_charger: smblib_set_prop_system_temp_level: thermal level:0, batt temp:369, thermal_levels:16chg->system_temp_level:0, charger_type:0
[ 1.954111] smblib_set_prop_system_temp_level val=0, chg->system_temp_level=0, LctThermal=0, lct_backlight_off= 0, IsInCall=0 \x0a
[ 1.954334] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 1.954967] CP_DISABLE: SRC_VOTER,5 voting on of val=1
[ 1.954972] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 1.956456] CP_ILIM: FCC_VOTER,0 voting on of val=100000
[ 1.956461] CP_ILIM: current vote is now 100000 voted by FCC_VOTER,0, previous voted 2950000
[ 1.956469] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: ilim 100000uA is too low to config CP charging
[ 1.956472] CP_DISABLE: ILIM_VOTER,3 voting on of val=1
[ 1.956504] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 1.956785] msm-dwc3 a600000.ssusb: USB core frequency = 133333333
[ 1.956797] msm-dwc3 a600000.ssusb: setting lpm_to_suspend_delay to zero.
[ 1.957145] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 1.957168] msm-dwc3 a600000.ssusb: IOMMU mapping created: 00000000e76f2a0f
[ 1.957319] ibat_ua =-103454
[ 1.957358] msm-dwc3 a600000.ssusb: attached to IOMMU
[ 1.957512] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_ALLOC
[ 1.957535] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 1.957648] dwc3 a600000.dwc3: Error getting ipc_log_ctxt
[ 1.957650] dwc3 a600000.dwc3: Error getting ipc_log_ctxt for ep_events
[ 1.957876] register_client_adhoc:find path.src 61 dest 512
[ 1.957992] register_client_adhoc:find path.src 61 dest 676
[ 1.958048] register_client_adhoc:find path.src 1 dest 583
[ 1.958071] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
[ 1.958088] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x000000000a704000
[ 1.958091] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x000000000a704000
[ 1.958095] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x000000000a704000
[ 1.958098] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x000000000a704000
[ 1.958101] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x000000000a704000
[ 1.958104] sps:BAM 0x000000000a704000 is registered.
[ 1.958107] register_client_adhoc:Client handle 50 usb0
[ 1.958207] msm-dwc3 a600000.ssusb: setting pm-qos-latency to zero.
[ 1.958808] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_FREE
[ 1.958892] ipa_rm ipa_rm_delete_resource:146 IPA RM was not initialized
[ 1.958894] usb_bam_ipa_delete_resources: Failed to delete USB_PROD resource
[ 1.958896] ipa_rm ipa_rm_delete_resource:146 IPA RM was not initialized
[ 1.958897] usb_bam_ipa_delete_resources: Failed to delete USB_CONS resource
[ 1.959580] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 1.959975] usbpd usbpd0: Type-C Source (high - 3.0A) connected
[ 1.960547] pm6150_charger: smblib_set_charge_param: switching frequency = 600 (0x0f)
[ 1.960562] pm6150_charger: smblib_usb_pd_adapter_allowance_override: set USBIN_ALLOW_OVERRIDE: 8
[ 1.960574] pm6150_charger: smblib_set_charge_param: AICL CONT threshold = -1000 (0x00)
[ 1.960894] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 1.960902] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 1.961139] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.963359] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 1.963610] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.964408] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.966011] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.967615] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.968132] msm-dwc3 a600000.ssusb: USB core frequency = 133333333
[ 1.968142] msm-dwc3 a600000.ssusb: setting lpm_to_suspend_delay to zero.
[ 1.968528] msm-dwc3 a600000.ssusb: IOMMU mapping created: 000000001537b6ef
[ 1.968715] msm-dwc3 a600000.ssusb: attached to IOMMU
[ 1.968856] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_ALLOC
[ 1.968881] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 1.968997] dwc3 a600000.dwc3: Error getting ipc_log_ctxt
[ 1.968999] dwc3 a600000.dwc3: Error getting ipc_log_ctxt for ep_events
[ 1.969013] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 1.969209] register_client_adhoc:find path.src 61 dest 512
[ 1.969325] register_client_adhoc:find path.src 61 dest 676
[ 1.969380] register_client_adhoc:find path.src 1 dest 583
[ 1.969423] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
[ 1.969439] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x000000000a704000
[ 1.969440] register_client_adhoc:Client handle 50 usb0
[ 1.969442] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x000000000a704000
[ 1.969444] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x000000000a704000
[ 1.969448] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x000000000a704000
[ 1.969451] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x000000000a704000
[ 1.969455] sps:BAM 0x000000000a704000 is registered.
[ 1.969543] msm-dwc3 a600000.ssusb: setting pm-qos-latency to zero.
[ 1.970453] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 1.970637] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 1.970645] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 1.970867] registered taskstats version 1
[ 1.970872] Loading compiled-in X.509 certificates
[ 1.971685] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.972287] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 1.972388] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 1.972474] Loaded X.509 cert 'Build time autogenerated kernel key: 50311b75435e1b4d947ab683376c40d3a072c3f3'
[ 1.972596] Key type ._fscrypt registered
[ 1.972601] Key type .fscrypt registered
[ 1.972604] Key type fscrypt-provisioning registered
[ 1.972925] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 1.972931] Error: swapper/0: fastrpc_device_init: failed to create debugfs root dir
[ 1.973437] ADSPRPC: Secure VMID = 22
[ 1.973439] ADSPRPC: Secure VMID = 37
[ 1.975330] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 1.976558] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.977784] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.978993] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.980203] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.981414] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 1.982615] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 1.983222] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 1.983775] ngd_msm_ctrl 62ec0000.slim: error creating ipc_logging context
[ 1.983781] ngd_msm_ctrl 62ec0000.slim: error creating ipc_error_logging context
[ 1.983846] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 1.986251] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 1.986628] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input3
[ 1.987411] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm6150@0:qcom,pm6150_rtc: setting system clock to 1974-04-22 19:14:57 UTC (135890097)
[ 1.987451] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.988099] CAM_ERR: CAM-CCI: cam_cci_assign_fops: 501 Invalid dev node:00000000a35d5f94 offset: 0
[ 1.988539] cma: cma_alloc(cma 000000008523c27c, count 2, align 1)
[ 1.988650] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.988661] cma: cma_alloc(): returned 00000000353c0375
[ 1.988680] lpm_levels: Cluster (L3) stats not registered
[ 1.988684] lpm_levels: register_cluster_lpm_stats()
[ 1.988687] lpm_levels: register_cluster_lpm_stats()
[ 1.989875] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.990165] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 1.990449] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 1.990457] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 1.991086] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 1.992300] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 1.993508] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 1.994120] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 1.994345] rmnet_ipa3 started initialization
[ 1.995500] RNDIS_IPA module is loaded.
[ 1.996419] msm_bus_late_init: Remove handoff bw requests
[ 1.997209] wide_ldo_dvdd_regulator: disabling
[ 1.997214] wide_ldo_dvdd2_regulator: disabling
[ 1.997218] depth_ldo_avdd_regulator: disabling
[ 1.997222] ultra_ldo_dvdd_regulator: disabling
[ 1.997225] front_ldo_dvdd_regulator: disabling
[ 1.997232] wide_ldo_avdd1_regulator: disabling
[ 1.997235] wide_ldo_avdd2_regulator: disabling
[ 1.997238] ultra_ldo_avdd_regulator: disabling
[ 1.997241] wide_ldo_afvdd_regulator: disabling
[ 1.997275] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
[ 1.997294] ALSA device list:
[ 1.997298] No soundcards found.
[ 1.997351] Warning: unable to open an initial console.
[ 1.998408] Freeing unused kernel memory: 4288K
[ 2.119412] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.121818] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 2.123007] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.124194] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.125380] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.126454] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 2.126567] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.127759] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 2.128949] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 2.129549] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.165158] SELinux: 8192 avtab hash slots, 28371 rules.
[ 2.168507] SELinux: 8192 avtab hash slots, 28371 rules.
[ 2.168519] SELinux: 1 users, 2 roles, 1896 types, 0 bools, 1 sens, 1024 cats
[ 2.168522] SELinux: 102 classes, 28371 rules
[ 2.169677] SELinux: Permission nlmsg_getneigh in class netlink_route_socket not defined in policy.
[ 2.169756] SELinux: the above unknown classes and permissions will be denied
[ 2.169778] SELinux: policy capability network_peer_controls=1
[ 2.169779] SELinux: policy capability open_perms=1
[ 2.169780] SELinux: policy capability extended_socket_class=1
[ 2.169782] SELinux: policy capability always_check_network=0
[ 2.169783] SELinux: policy capability cgroup_seclabel=0
[ 2.169784] SELinux: policy capability nnp_nosuid_transition=1
[ 2.169786] SELinux: Completing initialization.
[ 2.169786] SELinux: Setting up existing superblocks.
[ 2.174684] audit: type=1403 audit(135890097.679:2): policy loaded auid=4294967295 ses=4294967295
[ 2.181390] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 2.181400] [ds28e16] authentic_work: authentic result is 1
[ 2.268390] audit: type=1400 audit(135890097.769:3): avc: denied { sys_nice } for pid=505 comm="ueventd" capability=23 scontext=u:r:ueventd:s0 tcontext=u:r:ueventd:s0 tclass=capability permissive=1
[ 2.277950] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.280327] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 2.281505] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.282681] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.283857] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.285033] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.286214] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 2.287531] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 2.288342] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.305151] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 2.305155] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 0...
[ 2.305157] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.305158] [ds28e16] Read_RomID: getian---Read_RomID00
[ 2.305159] [ds28e16] ds28el16_Read_RomID_retry: getian---ds28el16_Read_RomID_retry00
[ 2.305162] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 2.305167] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 2.305169] [ds28e16] ds28el16_get_page_status_retry: read page status communication start... 0
[ 2.305170] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.305171] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 2.305176] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 2.397341] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 2.452455] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 2.452479] [ds28e16] verify_get_property: unsupported property 208
[ 2.452482] [ds28e16] verify_get_property: unsupported property 209
[ 2.452485] [ds28e16] verify_get_property: unsupported property 210
[ 2.452487] [ds28e16] verify_get_property: unsupported property 211
[ 2.452490] [ds28e16] verify_get_property: unsupported property 212
[ 2.452493] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 2.460614] pm6150_charger: smblib_set_prop_pr_swap_in_progress: Requested PR_SWAP 0
[ 2.460622] AWAKE: DETACH_DETECT_VOTER,0 voting on of val=1
[ 2.460674] pm6150_charger: smblib_set_prop_pr_swap_in_progress: restore power role: 1
[ 2.460712] pm6150_charger: smblib_usb_pd_adapter_allowance_override: set USBIN_ALLOW_OVERRIDE: 1
[ 2.461029] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 2.461036] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 2.461172] pm6150_charger: smblib_set_prop_pr_swap_in_progress: Requested PR_SWAP 0
[ 2.461219] pm6150_charger: smblib_set_prop_pr_swap_in_progress: restore power role: 1
[ 2.462202] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.462893] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 2.463532] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.465922] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 2.467120] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.468316] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.469512] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.470709] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.471910] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 2.473109] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 2.473716] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.480080] AWAKE: DETACH_DETECT_VOTER,0 voting off of val=0
[ 2.507550] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 2.507571] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 2.507574] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 0...
[ 2.507577] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.507580] [ds28e16] Read_RomID: getian---Read_RomID00
[ 2.507583] [ds28e16] ds28el16_Read_RomID_retry: getian---ds28el16_Read_RomID_retry00
[ 2.507585] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 2.507591] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 2.507594] [ds28e16] ds28el16_get_page_status_retry: read page status communication start... 0
[ 2.507596] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.507599] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 2.507605] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 2.540217] pm6150_charger: usb_source_change_irq_handler: APSD_STATUS = 0x00
[ 2.540236] pm6150_charger: usb_source_change_irq_handler: APSD_STATUS = 0x00
[ 2.540543] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 2.540762] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 2.540768] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 2.541737] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.542390] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 2.543031] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.545453] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 2.546673] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.547888] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.549099] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.550308] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.551521] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 2.552733] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 2.553345] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.562485] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 2.562489] [ds28e16] verify_get_property: unsupported property 208
[ 2.562490] [ds28e16] verify_get_property: unsupported property 209
[ 2.562491] [ds28e16] verify_get_property: unsupported property 210
[ 2.562492] [ds28e16] verify_get_property: unsupported property 211
[ 2.562493] [ds28e16] verify_get_property: unsupported property 212
[ 2.562495] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 2.617594] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 2.617604] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 2.672503] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 2.672507] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 2.727600] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 2.727610] [ds28e16] verify_get_property: getian---POWER_SUPPLY_PROP_CHIP_OK
[ 2.727614] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 2.727617] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 0...
[ 2.727619] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.727622] [ds28e16] Read_RomID: getian---Read_RomID00
[ 2.727625] [ds28e16] ds28el16_Read_RomID_retry: getian---ds28el16_Read_RomID_retry00
[ 2.727627] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 2.727631] [ds28e16] verify_get_property: getian---flag_mi_romid: 2, flag_mi_status: 1
[ 2.729780] QG-K: qg_get_ffc_iterm_for_chg: Set ffc_chg_iterm = -541
[ 2.729783] QG-K: qg_get_ffc_iterm_for_chg: Set ffc_chg_iterm = -541
[ 2.782702] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 2.782711] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 2.782714] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 0...
[ 2.782717] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.782719] [ds28e16] Read_RomID: getian---Read_RomID00
[ 2.782721] [ds28e16] ds28el16_Read_RomID_retry: getian---ds28el16_Read_RomID_retry00
[ 2.782724] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 2.782728] [ds28e16] verify_get_property: getian---POWER_SUPPLY_PROP_CHIP_OK
[ 2.782731] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu failed(-22) in set_sched_affinity_to_current.
[ 2.782734] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 0...
[ 2.782736] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.782738] [ds28e16] Read_RomID: getian---Read_RomID00
[ 2.782740] [ds28e16] ds28el16_Read_RomID_retry: getian---ds28el16_Read_RomID_retry00
[ 2.782743] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus failed(-22) in set_sched_affinity_to_all.
[ 2.782746] [ds28e16] verify_get_property: getian---flag_mi_romid: 2, flag_mi_status: 1
[ 2.837612] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 2.837616] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 2.837617] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 0...
[ 2.837618] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.837619] [ds28e16] Read_RomID: getian---Read_RomID00
[ 2.837620] [ds28e16] ds28el16_Read_RomID_retry: getian---ds28el16_Read_RomID_retry00
[ 2.837622] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 2.837623] [ds28e16] verify_get_property: getian---POWER_SUPPLY_PROP_CHIP_OK
[ 2.837625] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 2.837626] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 0...
[ 2.837627] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.837628] [ds28e16] Read_RomID: getian---Read_RomID00
[ 2.837629] [ds28e16] ds28el16_Read_RomID_retry: getian---ds28el16_Read_RomID_retry00
[ 2.837631] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 2.837632] [ds28e16] verify_get_property: getian---flag_mi_romid: 2, flag_mi_status: 1
[ 2.839279] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 2.839280] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 0...
[ 2.839281] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.839283] [ds28e16] Read_RomID: getian---Read_RomID00
[ 2.839284] [ds28e16] ds28el16_Read_RomID_retry: getian---ds28el16_Read_RomID_retry00
[ 2.839286] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 2.839289] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 2.839290] [ds28e16] ds28el16_get_page_status_retry: read page status communication start... 0
[ 2.839291] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.839293] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 2.839295] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 2.894218] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 2.894221] [ds28e16] verify_get_property: getian---POWER_SUPPLY_PROP_CHIP_OK
[ 2.894223] [ds28e16] set_sched_affinity_to_current: Setting cpu affinity to current cpu(6) in set_sched_affinity_to_current.
[ 2.894224] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start 0...
[ 2.894225] [ds28e16] DS28E16_cmd_readStatus: getian---DS28E16_cmd_readStatus00
[ 2.894226] [ds28e16] Read_RomID: getian---Read_RomID00
[ 2.894227] [ds28e16] ds28el16_Read_RomID_retry: getian---ds28el16_Read_RomID_retry00
[ 2.894229] [ds28e16] set_sched_affinity_to_all: Setting cpu affinity to all valid cpus in set_sched_affinity_to_all.
[ 2.894230] [ds28e16] verify_get_property: getian---flag_mi_romid: 2, flag_mi_status: 1
[ 2.897540] QG-K: qg_get_ffc_iterm_for_chg: Set ffc_chg_iterm = -541
[ 2.897542] QG-K: qg_get_ffc_iterm_for_chg: Set ffc_chg_iterm = -541
[ 2.902396] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.960177] pm6150_charger: smblib_icl_change_work: icl_settled=100000
[ 2.960438] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 2.960450] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 2.961641] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.962258] QG-K: qg_battery_soc_smooth_tracking: soc:-22, last_soc:-22, raw_soc:72, soc_changed:0, update_now:0, charge_status:1, batt_ma:323
[ 2.962496] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 2.963001] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 2.963011] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 2.964285] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 2.965048] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.966240] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:323, s:1
[ 2.967496] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 2.968761] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.970141] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.971053] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 2.971372] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.972590] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.973569] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 2.973734] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 2.973744] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 2.973867] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 2.975153] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 2.975477] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 2.975779] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.976458] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.978883] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 2.980100] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.981322] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.982538] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.983768] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 2.985007] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 2.986381] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 2.987016] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 2.987269] audit: type=1400 audit(135890098.489:4): avc: denied { entrypoint } for pid=519 comm="init" path="/system/bin/logd" dev="rootfs" ino=1310 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 2.988386] file system registered
[ 2.988459] Mass Storage Function, version: 2009/09/11
[ 2.988461] LUN: removable file: (no medium)
[ 2.989030] audit: type=1400 audit(135890098.489:5): avc: denied { map } for pid=519 comm="logd" path="/system/bin/logd" dev="rootfs" ino=1310 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 2.989038] audit: type=1400 audit(135890098.489:6): avc: denied { read } for pid=519 comm="logd" path="/system/bin/logd" dev="rootfs" ino=1310 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 2.989083] audit: type=1400 audit(135890098.489:7): avc: denied { execute } for pid=519 comm="logd" path="/system/bin/logd" dev="rootfs" ino=1310 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 2.990414] audit: type=1400 audit(135890098.499:8): avc: denied { getattr } for pid=519 comm="logd" path="/system/bin/logd" dev="rootfs" ino=1310 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 2.991005] audit: type=1400 audit(135890098.499:9): avc: denied { read } for pid=519 comm="logd" name="bin" dev="rootfs" ino=1204 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
[ 2.991263] audit: type=1400 audit(135890098.499:10): avc: denied { open } for pid=519 comm="logd" path="/system/lib64/libbase.so" dev="rootfs" ino=1551 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 3.009799] binder: 523:523 ioctl 40046210 7ff45e4304 returned -22
[ 3.010227] binder: 522:522 ioctl 40046210 7fdfda5bc4 returned -22
[ 3.023073] binder: 531:531 ioctl 40046210 7ffcf266e4 returned -22
[ 3.037171] binder: 521:521 ioctl 40046210 7fc163fbe4 returned -22
[ 3.048572] binder: 524:524 ioctl 40046210 7fd8dc9374 returned -22
[ 3.049887] binder: 529:529 ioctl 40046210 7fc22a3cd4 returned -22
[ 3.060268] binder: 524:524 ioctl 40046210 7fd8dc87a4 returned -22
[ 3.191692] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1,discard
[ 3.200307] EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1,discard
[ 3.206042] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1,discard
[ 3.211983] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1,discard
[ 3.223334] EXT4-fs (sda2): recovery complete
[ 3.223713] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
[ 3.229948] SELinux: Context u:object_r:vendor_persist_time_file:s0 is not valid (left unmapped).
[ 3.243305] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1,discard
[ 3.302627] pm6150_charger: usb_source_change_irq_handler: APSD_STATUS = 0x01
[ 3.302659] pm6150_charger: smblib_update_usb_type: APSD=SDP PD=0
[ 3.302699] USB_ICL: USB_PSY_VOTER,11 voting on of val=500000
[ 3.302704] USB_ICL: SW_ICL_MAX_VOTER,3 voting off of val=0
[ 3.302708] USB_ICL: current vote is now 500000 voted by USB_PSY_VOTER,11, previous voted 100000
[ 3.302714] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 3.302732] pm6150_charger: smblib_set_icl_current: set icl current = 500000
[ 3.302894] pm6150_charger: smblib_run_aicl: re-running AICL
[ 3.302917] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 3.302922] pm6150_charger: smblib_handle_apsd_done: IRQ: apsd-done rising; SDP detected
[ 3.302950] pm6150_charger: usb_source_change_irq_handler: APSD_STATUS = 0x01
[ 3.303345] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 3.303473] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 3.303482] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 3.304680] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 3.305107] CP_ILIM: FCC_VOTER,0 voting on of val=500000
[ 3.305115] CP_ILIM: current vote is now 500000 voted by FCC_VOTER,0, previous voted 100000
[ 3.305125] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: ilim 500000uA is too low to config CP charging
[ 3.305152] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 3.305801] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 3.308230] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 3.309466] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 3.310678] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 3.311886] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 3.313093] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 3.314311] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 3.315520] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 3.316132] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 3.318902] thermal_notifier_callback 4032
[ 3.318904] thermal_notifier lct_backlight_off:0
[ 3.320868] pm6150_charger: smblib_set_prop_system_temp_level: thermal level:0, batt temp:370, thermal_levels:16chg->system_temp_level:0, charger_type:4
[ 3.320872] smblib_set_prop_system_temp_level val=0, chg->system_temp_level=0, LctThermal=1, lct_backlight_off= 0, IsInCall=0 \x0a
[ 3.330074] [NVT-ts] nvt_drm_notifier_callback 2491: event=1, *blank=0
[ 3.330077] thermal_notifier_callback 4032
[ 3.330106] [NVT-ts] nvt_ts_resume 2382: Touch is already resume
[ 3.345496] pm6150_charger: smblib_icl_change_work: icl_settled=500000
[ 3.345779] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 3.345787] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 3.346962] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 3.347673] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 3.348322] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 3.350732] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 3.351940] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 3.353147] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 3.354353] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 3.355558] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 3.356767] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 3.357974] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 3.358586] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 3.547982] EXT4-fs (sda13): recovery complete
[ 3.548704] EXT4-fs (sda13): mounted filesystem with ordered data mode. Opts: barrier=1
[ 3.551893] F2FS-fs (sda18): Magic Mismatch, valid(0xf2f52010) - read(0xb6c846e4)
[ 3.551897] F2FS-fs (sda18): Can't find valid F2FS filesystem in 1th superblock
[ 3.552016] F2FS-fs (sda18): Magic Mismatch, valid(0xf2f52010) - read(0xfd189644)
[ 3.552019] F2FS-fs (sda18): Can't find valid F2FS filesystem in 2th superblock
[ 3.552167] F2FS-fs (sda18): Magic Mismatch, valid(0xf2f52010) - read(0xb6c846e4)
[ 3.552169] F2FS-fs (sda18): Can't find valid F2FS filesystem in 1th superblock
[ 3.552286] F2FS-fs (sda18): Magic Mismatch, valid(0xf2f52010) - read(0xfd189644)
[ 3.552287] F2FS-fs (sda18): Can't find valid F2FS filesystem in 2th superblock
[ 3.555008] F2FS-fs (sda18): Magic Mismatch, valid(0xf2f52010) - read(0xb6c846e4)
[ 3.555011] F2FS-fs (sda18): Can't find valid F2FS filesystem in 1th superblock
[ 3.555128] F2FS-fs (sda18): Magic Mismatch, valid(0xf2f52010) - read(0xfd189644)
[ 3.555129] F2FS-fs (sda18): Can't find valid F2FS filesystem in 2th superblock
[ 3.555270] F2FS-fs (sda18): Magic Mismatch, valid(0xf2f52010) - read(0xb6c846e4)
[ 3.555271] F2FS-fs (sda18): Can't find valid F2FS filesystem in 1th superblock
[ 3.555387] F2FS-fs (sda18): Magic Mismatch, valid(0xf2f52010) - read(0xfd189644)
[ 3.555388] F2FS-fs (sda18): Can't find valid F2FS filesystem in 2th superblock
[ 3.563097] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1,discard
[ 3.568524] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1,discard
[ 3.580124] EXT4-fs (sda12): recovery complete
[ 3.580491] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: discard
[ 3.646478] pm6150_charger: smblib_set_prop_pr_swap_in_progress: Requested PR_SWAP 0
[ 3.646493] AWAKE: DETACH_DETECT_VOTER,0 voting on of val=1
[ 3.646544] pm6150_charger: smblib_set_prop_pr_swap_in_progress: restore power role: 1
[ 3.646994] pm6150_charger: smblib_set_prop_pr_swap_in_progress: Requested PR_SWAP 0
[ 3.647043] pm6150_charger: smblib_set_prop_pr_swap_in_progress: restore power role: 1
[ 3.660135] AWAKE: DETACH_DETECT_VOTER,0 voting off of val=0
[ 3.668834] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
[ 3.920074] of_batterydata_get_best_profile: j6b-nvt-5020mah found
[ 3.920096] QCOM-STEPCHG: read_range_data_from_node: Count qcom,dynamic-fv-ranges failed, rc=-22
[ 3.920101] QCOM-STEPCHG: get_config_work: step-chg-cfg: 3001000uV(SoC) ~ 4250000uV(SoC), 5900000uA
[ 3.920105] QCOM-STEPCHG: get_config_work: step-chg-cfg: 4250001uV(SoC) ~ 4450000uV(SoC), 4900000uA
[ 3.920108] QCOM-STEPCHG: get_config_work: step-chg-cfg: 4450001uV(SoC) ~ 4480000uV(SoC), 3900000uA
[ 3.920111] QCOM-STEPCHG: get_config_work: step-chg-cfg: 0uV(SoC) ~ 0uV(SoC), 0uA
[ 3.920113] QCOM-STEPCHG: get_config_work: step-chg-cfg: 0uV(SoC) ~ 0uV(SoC), 0uA
[ 3.920116] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 0decidegree ~ 50decidegre, 900000uA
[ 3.920119] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 51decidegree ~ 100decidegre, 2300000uA
[ 3.920122] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 101decidegree ~ 150decidegre, 3300000uA
[ 3.920125] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 151decidegree ~ 450decidegre, 5900000uA
[ 3.920128] QCOM-STEPCHG: get_config_work: jeita-fcc-cfg: 451decidegree ~ 580decidegre, 2300000uA
[ 3.920131] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 0decidegree ~ 50decidegre, 4450000uV
[ 3.920134] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 51decidegree ~ 100decidegre, 4450000uV
[ 3.920137] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 101decidegree ~ 150decidegre, 4450000uV
[ 3.920140] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 151decidegree ~ 450decidegre, 4480000uV
[ 3.920142] QCOM-STEPCHG: get_config_work: jeita-fv-cfg: 451decidegree ~ 580decidegre, 4100000uV
[ 4.332168] msm-dwc3 a600000.ssusb: vbus:1 event received
[ 4.332201] msm-dwc3 a600000.ssusb: dwc3_resume_work: dwc3 resume work
[ 4.332210] msm-dwc3 a600000.ssusb: XCVR: ID set
[ 4.332214] msm-dwc3 a600000.ssusb: XCVR: BSV set
[ 4.332217] msm-dwc3 a600000.ssusb: XCVR: SUSP clear
[ 4.332232] msm-dwc3 a600000.ssusb: undefined state
[ 4.332239] msm-dwc3 a600000.ssusb: b_sess_vld
[ 4.332246] msm-dwc3 a600000.ssusb: DWC3-msm runtime resume
[ 4.332250] msm-dwc3 a600000.ssusb: dwc3_msm_resume: exiting lpm
[ 4.332390] msm-dwc3 a600000.ssusb: dwc3_msm_resume: exit power collapse
[ 4.333922] msm-dwc3 a600000.ssusb: attached to IOMMU
[ 4.333926] msm-dwc3 a600000.ssusb: dwc3_msm_resume: exit power collapse
[ 4.334357] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_POST_RESET_EVENT received
[ 4.334421] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
[ 4.334431] msm-dwc3 a600000.ssusb: dwc3_pwr_event_handler irq_stat=0
[ 4.334441] msm-dwc3 a600000.ssusb: dwc3_otg_start_peripheral: turn on gadget dwc3-gadget
[ 4.335696] msm-dwc3 a600000.ssusb: peripheral state
[ 4.544833] msm-dwc3 a600000.ssusb: msm_dwc3_pwr_irq received
[ 4.544841] msm-dwc3 a600000.ssusb: dwc3_pwr_event_handler irq_stat=4
[ 4.585316] binder: 525:525 ioctl 40046210 7fdd5d0004 returned -22
[ 4.832407] pm6150_charger: smblib_set_prop_pr_swap_in_progress: Requested PR_SWAP 0
[ 4.832421] AWAKE: DETACH_DETECT_VOTER,0 voting on of val=1
[ 4.832471] pm6150_charger: smblib_set_prop_pr_swap_in_progress: restore power role: 1
[ 4.832927] pm6150_charger: smblib_set_prop_pr_swap_in_progress: Requested PR_SWAP 0
[ 4.832981] pm6150_charger: smblib_set_prop_pr_swap_in_progress: restore power role: 1
[ 4.850075] AWAKE: DETACH_DETECT_VOTER,0 voting off of val=0
[ 4.866030] binder: 608:608 ioctl 40046210 7fc21f5e14 returned -22
[ 4.893365] binder: 621:621 ioctl 40046210 7fdb5854b4 returned -22
[ 4.914974] binder: 619:619 ioctl 40046210 7ffd25fff4 returned -22
[ 4.915991] binder: 620:620 ioctl 40046210 7ffa586004 returned -22
[ 5.633112] binder: 525:525 ioctl 40046210 7fdd5cff44 returned -22
[ 5.718649] F2FS-fs (dm-4): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0
[ 5.719346] F2FS-fs (dm-4): Reduce reserved blocks for root = 23052
[ 5.773814] F2FS-fs (dm-4): Disable nat_bits due to incorrect cp_ver (7237585323318029922, 12087699428911328846)
[ 5.791647] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.791895] F2FS-fs (dm-4): recover_dentry: ino = 2d36, name = <encrypted>, dir = 15, err = 0
[ 5.792278] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 64, err = 0
[ 5.792285] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792348] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 20, err = 0
[ 5.792352] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792399] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 11, err = 0
[ 5.792404] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792435] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 1, err = 0
[ 5.792439] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792476] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 5, err = 0
[ 5.792481] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792510] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 0, err = 0
[ 5.792515] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792543] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 0, err = 0
[ 5.792548] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792581] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 2, err = 0
[ 5.792585] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792615] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 0, err = 0
[ 5.792619] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792657] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 5, err = 0
[ 5.792661] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792693] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 1, err = 0
[ 5.792698] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792729] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 1, err = 0
[ 5.792734] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792773] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 6, err = 0
[ 5.792777] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792810] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 2, err = 0
[ 5.792815] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792851] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 3, err = 0
[ 5.792855] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792893] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 4, err = 0
[ 5.792897] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.792974] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 30, err = 0
[ 5.792979] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793017] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 3, err = 0
[ 5.793021] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793055] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 1, err = 0
[ 5.793060] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793093] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 1, err = 0
[ 5.793097] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793130] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 1, err = 0
[ 5.793135] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793178] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 8, err = 0
[ 5.793183] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793217] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 1, err = 0
[ 5.793221] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793258] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 3, err = 0
[ 5.793262] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793296] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 1, err = 0
[ 5.793300] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793337] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 3, err = 0
[ 5.793341] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793373] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 0, err = 0
[ 5.793377] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793408] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 0, err = 0
[ 5.793413] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793456] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 7, err = 0
[ 5.793460] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793498] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 3, err = 0
[ 5.793503] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793541] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 3, err = 0
[ 5.793545] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793577] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 0, err = 0
[ 5.793582] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793622] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 4, err = 0
[ 5.793626] F2FS-fs (dm-4): recover_inode: ino = 2d36, name = <encrypted>, inline = 21
[ 5.793662] F2FS-fs (dm-4): recover_data: ino = 2d36 (i_size: recover) recovered = 2, err = 0
[ 5.793669] F2FS-fs (dm-4): recover_inode: ino = 2d38, name = <encrypted>, inline = 21
[ 5.794627] F2FS-fs (dm-4): recover_dentry: ino = 2d38, name = <encrypted>, dir = 10d, err = 0
[ 5.794705] F2FS-fs (dm-4): recover_data: ino = 2d38 (i_size: recover) recovered = 31, err = 0
[ 5.794711] F2FS-fs (dm-4): recover_inode: ino = 1246, name = <encrypted>, inline = 21
[ 5.794769] F2FS-fs (dm-4): recover_data: ino = 1246 (i_size: recover) recovered = 31, err = 0
[ 5.794775] F2FS-fs (dm-4): recover_inode: ino = 2d39, name = <encrypted>, inline = 21
[ 5.794942] F2FS-fs (dm-4): recover_dentry: ino = 2d39, name = <encrypted>, dir = 147, err = 0
[ 5.795034] F2FS-fs (dm-4): recover_data: ino = 2d39 (i_size: recover) recovered = 41, err = 0
[ 5.795041] F2FS-fs (dm-4): recover_inode: ino = 1289, name = <encrypted>, inline = 21
[ 5.795106] F2FS-fs (dm-4): recover_data: ino = 1289 (i_size: recover) recovered = 41, err = 0
[ 5.795112] F2FS-fs (dm-4): recover_inode: ino = 2d3a, name = <encrypted>, inline = 21
[ 5.795121] F2FS-fs (dm-4): recover_dentry: ino = 2d3a, name = <encrypted>, dir = 15, err = 0
[ 5.795196] F2FS-fs (dm-4): recover_data: ino = 2d3a (i_size: recover) recovered = 30, err = 0
[ 5.795201] F2FS-fs (dm-4): recover_inode: ino = 2d3e, name = <encrypted>, inline = 21
[ 5.795210] F2FS-fs (dm-4): recover_dentry: ino = 2d3e, name = <encrypted>, dir = 15, err = 0
[ 5.795337] F2FS-fs (dm-4): recover_data: ino = 2d3e (i_size: recover) recovered = 66, err = 0
[ 5.795342] F2FS-fs (dm-4): recover_inode: ino = 2d3e, name = <encrypted>, inline = 21
[ 5.795401] F2FS-fs (dm-4): recover_data: ino = 2d3e (i_size: recover) recovered = 20, err = 0
[ 5.795405] F2FS-fs (dm-4): recover_inode: ino = 2d3e, name = <encrypted>, inline = 21
[ 5.795451] F2FS-fs (dm-4): recover_data: ino = 2d3e (i_size: recover) recovered = 11, err = 0
[ 5.795455] F2FS-fs (dm-4): recover_inode: ino = 2d3e, name = <encrypted>, inline = 21
[ 5.795484] F2FS-fs (dm-4): recover_data: ino = 2d3e (i_size: recover) recovered = 0, err = 0
[ 5.795489] F2FS-fs (dm-4): recover_inode: ino = 2d3e, name = <encrypted>, inline = 21
[ 5.795527] F2FS-fs (dm-4): recover_data: ino = 2d3e (i_size: recover) recovered = 6, err = 0
[ 5.795532] F2FS-fs (dm-4): recover_inode: ino = 2d3e, name = <encrypted>, inline = 21
[ 5.795560] F2FS-fs (dm-4): recover_data: ino = 2d3e (i_size: recover) recovered = 0, err = 0
[ 5.795565] F2FS-fs (dm-4): recover_inode: ino = 2d3e, name = <encrypted>, inline = 21
[ 5.795594] F2FS-fs (dm-4): recover_data: ino = 2d3e (i_size: recover) recovered = 0, err = 0
[ 5.799010] F2FS-fs (dm-4): checkpoint: version = 53f3ae63
[ 5.799172] F2FS-fs (dm-4): Mounted with checkpoint version = 53f3ae63
[ 5.920080] [NVT-ts] update_firmware_request 316: filename is novatek_ts_tianma_fw.bin
[ 5.924248] [NVT-ts] nvt_get_fw_need_write_size 70: fw_need_write_size = 131072(0x20000), NVT end flag
[ 5.924256] [NVT-ts] nvt_bin_header_parser 177: ovly_info = 0, ilm_dlm_num = 2, ovly_sec_num = 0, info_sec_num = 13, partition = 15
[ 6.018278] pm6150_charger: smblib_set_prop_pr_swap_in_progress: Requested PR_SWAP 0
[ 6.018289] AWAKE: DETACH_DETECT_VOTER,0 voting on of val=1
[ 6.018342] pm6150_charger: smblib_set_prop_pr_swap_in_progress: restore power role: 1
[ 6.018441] PL_DISABLE: PL_SMB_EN_VOTER,7 voting on of val=1
[ 6.018447] SMB_EN_OVERRIDE: PL_SMB_EN_VOTER,0 voting on of val=1
[ 6.018451] SMB_EN_OVERRIDE: current vote is now 1 voted by PL_SMB_EN_VOTER,0, previous voted 0
[ 6.018500] pm6150_charger: smblib_usb_pd_adapter_allowance_override: set USBIN_ALLOW_OVERRIDE: 0
[ 6.018524] pm6150_charger: smblib_update_usb_type: APSD=SDP PD=0
[ 6.018596] usbpd usbpd0: typec mode:8 type:4
[ 6.018605] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 6.018903] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 6.018911] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 6.027645] QCOM-STEPCHG: handle_jeita: temp:369, new JEITA index:3, New JEITA FCC:5900000
[ 6.027654] FCC: JEITA_VOTER,4 voting on of val=5900000
[ 6.027660] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 369 FCC = 5900000uA FV = 4480000uV
[ 6.027667] FV: JEITA_VOTER,4 voting on of val=4480000
[ 6.030060] AWAKE: DETACH_DETECT_VOTER,0 voting off of val=0
[ 6.035475] [NVT-ts] nvt_update_firmware 911: Update firmware success! <111199 us>
[ 6.035653] [NVT-ts] nvt_get_fw_info 785: fw_ver = 0x11, fw_type = 0x01
[ 6.035889] [NVT-ts] nvt_read_pid 726: PID=592E
[ 6.035934] [NVT-ts] nvt_ts_usb_plugin_work_func 230: ++
[ 6.035938] [NVT-ts] nvt_ts_usb_plugin_work_func 232: usb_plugged_in = 1
[ 6.080219] [NVT-ts] nvt_ts_usb_plugin_work_func 257: --
[ 6.163573] aw8624_ram_loaded: loaded aw8624_haptic.bin - size: 3729
[ 6.163585] aw8624_ram_loaded: check sum pass : 0x3451
[ 6.164135] aw8624_container_update: base_addr=0x 800
[ 6.630608] aw8624_ram_loaded: fw update complete
[ 6.634698] aw8624_rtp_loaded: loaded osc_rtp_24K_5s.bin - size: 120000
[ 6.634724] aw8624_rtp_loaded: rtp size = 120000
[ 6.634766] aw8624_rtp_loaded: rtp update complete
[ 6.826794] fscrypt: AES-256-CTS-CBC using implementation "cts(cbc-aes-ce)"
[ 6.847599] SELinux: Context u:object_r:system_userdir_file:s0 is not valid (left unmapped).
[ 6.848372] SELinux: Context u:object_r:vendor_userdir_file:s0 is not valid (left unmapped).
[ 6.891866] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1,discard
[ 6.916682] SELinux: security_context_str_to_sid(u:object_r:firmware_file:s0) failed for (dev sde4, type vfat) errno=-22
[ 7.970500] SELinux: Context u:object_r:media_userdir_file:s0 is not valid (left unmapped).
[ 7.986288] SELinux: Context u:object_r:sdk_sandbox_system_data_file:s0:c512,c768 is not valid (left unmapped).
[ 7.986603] SELinux: Context u:object_r:checkin_data_file:s0:c512,c768 is not valid (left unmapped).
[ 7.992859] SELinux: Context u:object_r:apex_system_server_data_file:s0 is not valid (left unmapped).
[ 8.055081] read descriptors
[ 8.055096] read strings
[ 8.057013] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_NOTIFY_OTG_EVENT received
[ 8.057029] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_SETUP
[ 8.057034] msm-dwc3 a600000.ssusb: Evt buf 0000000000000000 dma efffe000 length 4096
[ 8.057041] msm-dwc3 a600000.ssusb: Evt buf 0000000000000000 dma efffd000 length 4096
[ 8.057048] msm-dwc3 a600000.ssusb: Evt buf 0000000000000000 dma efffc000 length 4096
[ 8.062616] android_work: did not send uevent (0 0 0000000000000000)
[ 8.066999] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
[ 8.067028] msm-dwc3 a600000.ssusb: Avail curr from USB = 2
[ 8.161833] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_NOTIFY_OTG_EVENT received
[ 8.161844] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
[ 8.161862] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_NOTIFY_CLEAR_DB
[ 8.161884] msm-dwc3 a600000.ssusb: Avail curr from USB = 100
[ 8.216590] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
[ 8.250370] android_work: sent uevent USB_STATE=CONNECTED
[ 8.427754] configfs-gadget gadget: high-speed config #1: b
[ 8.427828] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
[ 8.427856] msm-dwc3 a600000.ssusb: Avail curr from USB = 500
[ 8.427930] android_work: sent uevent USB_STATE=CONFIGURED
[ 9.071176] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1,discard
[ 9.079822] EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1,discard
[ 9.086624] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1,discard
[ 9.093490] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1,discard
[ 9.099557] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts:
[ 9.106217] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
[ 9.362003] SELinux: Context u:object_r:vendor_tombstone_data_file:s0 is not valid (left unmapped).
[ 9.366188] SELinux: Context u:object_r:vendor_display_vendor_data_file:s0 is not valid (left unmapped).
[ 9.366268] SELinux: Context u:object_r:vendor_lm_data_file:s0 is not valid (left unmapped).
[ 9.366399] SELinux: Context u:object_r:vendor_media_data_file:s0 is not valid (left unmapped).
[ 9.366482] SELinux: Context u:object_r:vendor_data_tzstorage_file:s0 is not valid (left unmapped).
[ 9.366625] SELinux: Context u:object_r:vendor_camera_data_file:s0 is not valid (left unmapped).
[ 9.367681] SELinux: Context u:object_r:vendor_ramdump_vendor_data_file:s0 is not valid (left unmapped).
[ 9.367943] SELinux: Context u:object_r:vendor_bt_data_file:s0 is not valid (left unmapped).
[ 9.368023] SELinux: Context u:object_r:vendor_wifi_vendor_data_file:s0 is not valid (left unmapped).
[ 9.368285] SELinux: Context u:object_r:vendor_wifi_vendor_wpa_socket:s0 is not valid (left unmapped).
[ 9.369956] SELinux: Context u:object_r:vendor_cnd_data_file:s0 is not valid (left unmapped).
[ 9.370359] SELinux: Context u:object_r:vendor_audio_data_file:s0 is not valid (left unmapped).
[ 9.371683] SELinux: Context u:object_r:vendor_radio_vendor_data_file:s0 is not valid (left unmapped).
[ 9.372532] SELinux: Context u:object_r:vendor_mbn_data_file:s0 is not valid (left unmapped).
[ 9.478431] SELinux: Context u:object_r:vendor_location_data_file:s0 is not valid (left unmapped).
[ 9.479289] SELinux: Context u:object_r:vendor_secure_element_vendor_data_file:s0 is not valid (left unmapped).
[ 9.479443] SELinux: Context u:object_r:vendor_vpp_data_file:s0 is not valid (left unmapped).
[ 9.479522] SELinux: Context u:object_r:vendor_tui_data_file:s0 is not valid (left unmapped).
[ 9.479874] SELinux: Context u:object_r:vendor_hbtp_log_file:s0 is not valid (left unmapped).
[ 9.479958] SELinux: Context u:object_r:vendor_hal_neuralnetworks_data_file:s0 is not valid (left unmapped).
[ 9.480155] SELinux: Context u:object_r:vendor_thermal_data_file:s0 is not valid (left unmapped).
[ 9.480869] SELinux: Context u:object_r:vendor_qti_data_file:s0 is not valid (left unmapped).
[ 9.480953] SELinux: Context u:object_r:vendor_ipa_vendor_data_file:s0 is not valid (left unmapped).
[ 9.481206] SELinux: Context u:object_r:vendor_netmgr_data_file:s0 is not valid (left unmapped).
[ 9.481406] SELinux: Context u:object_r:vendor_netmgr_recovery_data_file:s0 is not valid (left unmapped).
[ 9.481652] SELinux: Context u:object_r:vendor_port_bridge_data_file:s0 is not valid (left unmapped).
[ 9.481734] SELinux: Context u:object_r:vendor_time_data_file:s0 is not valid (left unmapped).
[ 9.481813] SELinux: Context u:object_r:vendor_pddump_data_file:s0 is not valid (left unmapped).
[ 9.481897] SELinux: Context u:object_r:vendor_mediadrm_vendor_data_file:s0 is not valid (left unmapped).
[ 9.601849] SELinux: Context u:object_r:apex_tethering_data_file:s0 is not valid (left unmapped).
[ 9.602337] SELinux: Context u:object_r:apex_uwb_data_file:s0 is not valid (left unmapped).
[ 9.602359] SELinux: Context u:object_r:apex_virt_data_file:s0 is not valid (left unmapped).
[ 9.602754] SELinux: Context u:object_r:uprobestats_configs_data_file:s0 is not valid (left unmapped).
[ 9.603220] SELinux: Context u:object_r:odsign_metrics_file:s0 is not valid (left unmapped).
[ 9.603359] SELinux: Context u:object_r:connectivityblob_data_file:s0 is not valid (left unmapped).
[ 9.603386] SELinux: Context u:object_r:virtualizationservice_data_file:s0 is not valid (left unmapped).
[ 9.603853] SELinux: Context u:object_r:stats_config_data_file:s0 is not valid (left unmapped).
[ 9.604120] SELinux: Context u:object_r:bootanim_data_file:s0 is not valid (left unmapped).
[ 9.605084] SELinux: Context u:object_r:perfetto_traces_profiling_data_file:s0 is not valid (left unmapped).
[ 9.607474] SELinux: Context u:object_r:apk_metadata_file:s0 is not valid (left unmapped).
[ 9.624623] SELinux: Context u:object_r:shutdown_checkpoints_system_data_file:s0 is not valid (left unmapped).
[ 9.652701] SELinux: Context u:object_r:sdk_sandbox_system_data_file:s0 is not valid (left unmapped).
[ 10.199747] SELinux: Context u:object_r:adbroot_data_file:s0 is not valid (left unmapped).
[ 10.199782] SELinux: Context u:object_r:vendor_dpmd_data_file:s0 is not valid (left unmapped).
[ 10.206046] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1,discard
[ 10.213212] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1,discard
[ 10.219669] EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1,discard
[ 10.224927] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1,discard
[ 10.230514] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1,discard
[ 10.234484] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts:
[ 10.238644] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
[ 11.795349] audit_log_start: 3 callbacks suppressed
[ 11.795350] audit: audit_backlog=65 > audit_backlog_limit=64
[ 11.795355] audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=64
[ 11.795357] audit: backlog limit exceeded
[ 11.795359] audit: audit_backlog=65 > audit_backlog_limit=64
[ 11.795360] audit: audit_lost=2 audit_rate_limit=0 audit_backlog_limit=64
[ 11.795361] audit: backlog limit exceeded
[ 11.795377] audit: audit_backlog=65 > audit_backlog_limit=64
[ 11.795378] audit: audit_lost=3 audit_rate_limit=0 audit_backlog_limit=64
[ 11.795380] audit: backlog limit exceeded
[ 11.795381] audit: audit_backlog=65 > audit_backlog_limit=64
[ 12.455758] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null)
[ 12.726278] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
[ 13.004982] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
[ 13.243666] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
[ 13.282098] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:0, update_now:0, charge_status:1, batt_ma:152
[ 13.284069] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:152, s:1
[ 14.242596] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1,discard
[ 14.251526] EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1,discard
[ 14.258221] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1,discard
[ 14.265064] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1,discard
[ 14.271065] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts:
[ 14.276980] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
[ 14.680096] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 14.747880] request_module fs-auto succeeded, but still no fs?
[ 14.773847] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1,discard
[ 14.796189] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_NOTIFY_OTG_EVENT received
[ 14.796478] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_NOTIFY_CLEAR_DB
[ 14.796487] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_CLEAR
[ 14.796532] dwc3 a600000.dwc3: request 0000000000000000 was not queued to ep0out
[ 14.937688] read descriptors
[ 14.937705] read strings
[ 14.940220] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_NOTIFY_OTG_EVENT received
[ 14.940233] msm-dwc3 a600000.ssusb: DWC3_GSI_EVT_BUF_SETUP
[ 14.940239] msm-dwc3 a600000.ssusb: Evt buf 0000000000000000 dma efffe000 length 4096
[ 14.940246] msm-dwc3 a600000.ssusb: Evt buf 0000000000000000 dma efffd000 length 4096
[ 14.940253] msm-dwc3 a600000.ssusb: Evt buf 0000000000000000 dma efffc000 length 4096
[ 14.942512] android_work: sent uevent USB_STATE=DISCONNECTED
[ 14.946704] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
[ 14.946740] msm-dwc3 a600000.ssusb: Avail curr from USB = 2
[ 15.041542] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_NOTIFY_OTG_EVENT received
[ 15.041554] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
[ 15.041575] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_NOTIFY_CLEAR_DB
[ 15.041598] msm-dwc3 a600000.ssusb: Avail curr from USB = 100
[ 15.041633] android_work: did not send uevent (0 0 0000000000000000)
[ 15.096279] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
[ 15.129425] android_work: sent uevent USB_STATE=CONNECTED
[ 15.158192] configfs-gadget gadget: high-speed config #1: b
[ 15.158290] msm-dwc3 a600000.ssusb: DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT received
[ 15.158319] msm-dwc3 a600000.ssusb: Avail curr from USB = 500
[ 15.158395] android_work: sent uevent USB_STATE=CONFIGURED
[ 15.606824] mtp_open
[ 15.607081] mtp_open
[ 15.607085] mtp_open mtp_release not called returning EBUSY
[ 15.607093] mtp_release
[ 16.407216] mtp_open
[ 23.520111] ibat_ua =-348205
[ 23.522086] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:-348
[ 23.536292] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:-348, s:1
[ 32.480081] pm6150_charger: smblib_pl_enable_work: timer expired, enabling parallel
[ 32.480092] PL_DISABLE: PL_DELAY_VOTER,4 voting off of val=0
[ 32.480097] AWAKE: PL_DELAY_VOTER,2 voting off of val=0
[ 33.760136] ibat_ua =-350342
[ 33.762103] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:-350
[ 33.764051] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:-350, s:1
[ 36.960107] ibat_ua =-346679
[ 38.000103] ibat_ua =-347290
[ 39.040118] ibat_ua =-348816
[ 40.080137] ibat_ua =-346985
[ 41.120112] ibat_ua =-347900
[ 42.160099] ibat_ua =-347290
[ 43.200101] ibat_ua =-348510
[ 44.000100] ibat_ua =-348510
[ 44.006793] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:-348
[ 44.008743] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:-348, s:1
[ 44.240109] ibat_ua =-346679
[ 45.280100] ibat_ua =-344238
[ 46.320098] ibat_ua =-350036
[ 46.320175] QG_WS: TTF_AWAKE_VOTER,0 voting off of val=0
[ 54.240118] ibat_ua =-347290
[ 54.252499] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:-347
[ 54.254449] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:-347, s:1
[ 56.800103] ibat_ua =-350036
[ 64.328668] QG_WS: FIFO_DONE_VOTER,1 voting on of val=1
[ 64.482066] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:57
[ 64.484014] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:57, s:1
[ 69.288151] pm6150_charger: wdog_bark_irq_handler: IRQ: wdog-bark
[ 69.288324] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 69.288726] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 69.288734] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 69.290393] QCOM-STEPCHG: handle_jeita: temp:368, new JEITA index:3, New JEITA FCC:5900000
[ 69.292359] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 69.292445] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 368 FCC = 5900000uA FV = 4480000uV
[ 69.293231] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 69.295655] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 69.296872] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 69.298617] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 69.299832] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 69.301922] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 69.303536] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 69.304746] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 69.305360] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 74.722063] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:47
[ 74.724012] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:47, s:1
[ 84.963291] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:49
[ 84.965243] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:49, s:1
[ 95.202573] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:50
[ 95.205292] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:50, s:1
[ 105.442069] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:50
[ 105.444018] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:50, s:1
[ 115.682104] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:50
[ 115.696197] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:50, s:1
[ 123.316027] ibat_ua =-350036
[ 123.327803] ibat_ua =-340576
[ 124.652858] pm6150_charger: usb_source_change_irq_handler: APSD_STATUS = 0x11
[ 124.652888] pm6150_charger: smblib_update_usb_type: APSD=SDP PD=0
[ 124.652926] pm6150_charger: smblib_handle_apsd_done: IRQ: apsd-done rising; SDP detected
[ 124.652954] pm6150_charger: usb_source_change_irq_handler: APSD_STATUS = 0x11
[ 124.653354] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 124.653367] usbpd usbpd0: typec mode:8 type:4
[ 124.653507] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 124.653514] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 124.654702] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 124.654950] ibat_ua =-350952
[ 124.655128] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 124.655778] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 124.657112] QCOM-STEPCHG: handle_jeita: temp:366, new JEITA index:3, New JEITA FCC:5900000
[ 124.657125] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 366 FCC = 5900000uA FV = 4480000uV
[ 124.658195] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 124.659409] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 124.660678] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 124.661888] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 124.663111] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 124.663565] ibat_ua =-350952
[ 124.664327] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 124.665534] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 124.666147] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 124.666398] ibat_ua =-350952
[ 124.669211] ibat_ua =-350952
[ 124.672021] ibat_ua =-350952
[ 124.674820] ibat_ua =-350952
[ 125.922091] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:57
[ 125.924045] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:57, s:1
[ 135.197873] pm6150_charger: wdog_bark_irq_handler: IRQ: wdog-bark
[ 135.198054] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 135.198454] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 135.198463] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 135.200162] QCOM-STEPCHG: handle_jeita: temp:366, new JEITA index:3, New JEITA FCC:5900000
[ 135.202136] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 135.202222] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 366 FCC = 5900000uA FV = 4480000uV
[ 135.203010] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 135.205434] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 135.206649] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 135.207862] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 135.209063] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 135.210302] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 135.211515] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 135.212724] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 135.213337] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 136.162128] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:47
[ 136.164074] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:47, s:1
[ 146.412427] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:47
[ 146.414377] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:47, s:1
[ 156.642085] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:49
[ 156.644036] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:49, s:1
[ 166.882109] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:51
[ 166.884061] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:51, s:1
[ 177.127667] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:53
[ 177.129617] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:53, s:1
[ 187.360145] ibat_ua =-346985
[ 187.362111] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:-346
[ 187.364062] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:-346, s:1
[ 197.602094] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:58
[ 197.604047] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:58, s:1
[ 201.106330] pm6150_charger: wdog_bark_irq_handler: IRQ: wdog-bark
[ 201.106532] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 201.106934] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 201.106942] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 201.108602] QCOM-STEPCHG: handle_jeita: temp:367, new JEITA index:3, New JEITA FCC:5900000
[ 201.110571] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 201.110660] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 367 FCC = 5900000uA FV = 4480000uV
[ 201.111409] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 201.113833] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 201.115047] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 201.116259] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 201.117458] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 201.118693] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 201.119904] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 201.121118] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 201.121733] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 207.842924] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:51
[ 207.844875] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:51, s:1
[ 218.082094] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:58
[ 218.084049] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:58, s:1
[ 224.115705] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1,discard
[ 224.125587] EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1,discard
[ 224.132920] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1,discard
[ 224.140510] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1,discard
[ 224.148244] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts:
[ 224.155340] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
[ 224.214698] audit_log_start: 1181 callbacks suppressed
[ 224.214701] audit: audit_backlog=65 > audit_backlog_limit=64
[ 224.214706] audit: audit_lost=398 audit_rate_limit=0 audit_backlog_limit=64
[ 224.214707] audit: backlog limit exceeded
[ 224.214709] audit: audit_backlog=65 > audit_backlog_limit=64
[ 224.214710] audit: audit_lost=399 audit_rate_limit=0 audit_backlog_limit=64
[ 224.214711] audit: backlog limit exceeded
[ 224.214749] audit: audit_backlog=65 > audit_backlog_limit=64
[ 224.214750] audit: audit_lost=400 audit_rate_limit=0 audit_backlog_limit=64
[ 224.214751] audit: backlog limit exceeded
[ 224.214759] audit: audit_backlog=65 > audit_backlog_limit=64
[ 228.322067] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:58
[ 228.324021] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:58, s:1
[ 238.562089] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:51
[ 238.564041] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:51, s:1
[ 248.802100] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:51
[ 248.804053] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:51, s:1
[ 259.042072] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:47
[ 259.044024] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:47, s:1
[ 267.018855] pm6150_charger: wdog_bark_irq_handler: IRQ: wdog-bark
[ 267.019272] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 267.019434] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 267.019443] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 267.023619] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 267.024552] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 267.026436] QCOM-STEPCHG: handle_jeita: temp:366, new JEITA index:3, New JEITA FCC:5900000
[ 267.026447] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 366 FCC = 5900000uA FV = 4480000uV
[ 267.026998] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 267.028209] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 267.029416] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 267.030647] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 267.031847] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 267.033054] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 267.034262] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 267.034875] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 269.282120] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:60
[ 269.284076] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:60, s:1
[ 279.522068] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:54
[ 279.524019] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:54, s:1
[ 289.762582] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:52
[ 289.764535] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:52, s:1
[ 300.002082] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:58
[ 300.004031] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:58, s:1
[ 305.120281] servloc: init_service_locator: init_service_locator: wait for locator service timed out
[ 305.120299] servloc: pd_locator_work: Unable to connect to service locator!, rc = -62
[ 305.120363] servloc: pd_locator_work: Unable to connect to service locator!, rc = -62
[ 305.120369] audio_notifer_reg_service: service SSR_ADSP is in use
[ 305.120382] servloc: pd_locator_work: Unable to connect to service locator!, rc = -62
[ 305.120387] ADSPRPC: Audio PD restart notifier locator down
[ 305.120411] servloc: pd_locator_work: Unable to connect to service locator!, rc = -62
[ 305.120414] ADSPRPC: Audio PD restart notifier locator down
[ 305.120445] servloc: pd_locator_work: Unable to connect to service locator!, rc = -62
[ 310.242093] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:53
[ 310.244040] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:53, s:1
[ 320.482087] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:49
[ 320.484037] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:49, s:1
[ 330.720104] ibat_ua =-342407
[ 330.722074] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:-342
[ 330.724024] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:-342, s:1
[ 332.923404] pm6150_charger: wdog_bark_irq_handler: IRQ: wdog-bark
[ 332.923600] QCOM-STEPCHG: handle_jeita: handle_jeita enter
[ 332.923978] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 332.923986] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 332.925654] QCOM-STEPCHG: handle_jeita: temp:365, new JEITA index:3, New JEITA FCC:5900000
[ 332.927620] pm6150_charger: smblib_set_charge_param: float voltage = 4450000 (0x55)
[ 332.927706] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 365 FCC = 5900000uA FV = 4480000uV
[ 332.928479] ibat_ua =-345154
[ 332.928491] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 332.930923] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status2 = 0x21
[ 332.932132] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 332.933338] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 332.934553] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 332.935769] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: smb_en = 0, switcher_en = 0, slave_en = 0
[ 332.936981] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: irq_status = 0x2
[ 332.938188] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: get iin_ma = 2950mA
[ 332.938800] qcom,smb1398-charger a8c000.i2c:qcom,smb1396@34:qcom,div2_cp: status1 = 0x0
[ 332.939118] ibat_ua =-345154
[ 332.961172] ibat_ua =-345459
[ 332.964011] ibat_ua =-345459
[ 332.966824] ibat_ua =-345459
[ 333.280106] ibat_ua =-348816
[ 339.703629] ibat_ua =-346069
[ 340.960135] ibat_ua =-341491
[ 340.973974] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:-341
[ 340.975923] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:-341, s:1
[ 343.520127] ibat_ua =-341186
[ 351.200116] ibat_ua =-349731
[ 351.202082] QG-K: qg_battery_soc_smooth_tracking: soc:72, last_soc:72, raw_soc:72, soc_changed:1, update_now:0, charge_status:1, batt_ma:-349
[ 351.204031] QG-K: soc_monitor_work: soc:72, raw_soc:72, c:-349, s:1
[ 352.224507] ibat_ua =-344238
Editor is loading...
Leave a Comment