Untitled
unknown
plain_text
a year ago
99 kB
16
Indexable
Never
0|mm | 0|mm | npm ERR! A complete log of this run can be found in: 0|mm | npm ERR! /root/.npm/_logs/2022-10-28T23_40_08_998Z-debug.log 0|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory 0|mm | npm ERR! code ENOENT 0|mm | npm ERR! syscall open 0|mm | npm ERR! path /root/package.json 0|mm | npm ERR! errno -2 0|mm | npm ERR! enoent ENOENT: no such file or directory, open '/root/package.json' 0|mm | npm ERR! enoent This is related to npm not being able to find a file. 0|mm | npm ERR! enoent 0|mm | 0|mm | npm ERR! A complete log of this run can be found in: 0|mm | npm ERR! /root/.npm/_logs/2022-10-28T23_40_09_631Z-debug.log 0|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory /root/.pm2/logs/mm-out.log last 15 lines: 0|mm | EAPOL: External notification - portValid=0 0|mm | wlan0: WPA: Clear old PMK and PTK 0|mm | wlan0: Cancelling delayed sched scan 0|mm | wlan0: Cancelling scan request 0|mm | wlan0: Cancelling authentication timeout 0|mm | Off-channel: Clear pending Action frame TX (pending_action_tx=(nil) 0|mm | nl80211: Data frame filter flags=0x0 0|mm | Off-channel: Action frame sequence done notification: pending_action_tx=(nil) drv_offchan_tx=1 action_tx_wait_time=0 off_channel_freq=0 roc_waiting_drv_freq=0 0|mm | Remove interface wlan0 from radio phy0 0|mm | Remove radio phy0 0|mm | nl80211: deinit ifname=wlan0 disabled_11b_rates=0 0|mm | nl80211: Remove monitor interface: refcount=0 0|mm | netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) 0|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 0|mm | nl80211: Unsubscribe mgmt frames handle 0x89a6c209 (mode change) 1|mm | npm 1|mm | 1|mm | ERR! code ENOENT 1|mm | npm ERR! syscall open 1|mm | npm 1|mm | ERR! path /root/package.json 1|mm | npm ERR! errno -2 1|mm | npm 1|mm | ERR! enoent ENOENT: no such file or directory, open '/root/package.json' 1|mm | npm ERR! enoent This is related to npm not being able to find a file. 1|mm | npm ERR! enoent 1|mm | npm ERR! A complete log of this run can be found in: 1|mm | npm ERR! /root/.npm/_logs/2022-10-28T23_40_14_147Z-debug.log 1|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory 1|mm | wpa_supplicant v2.9 1|mm | random: getrandom() support available 1|mm | Successfully initialized wpa_supplicant 1|mm | Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' 1|mm | Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' 1|mm | Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' 1|mm | ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=netdev' 1|mm | update_config=1 1|mm | country='BR' 1|mm | Priority group 0 1|mm | id=0 ssid='Magic kingdom' 1|mm | nl80211: Using driver-based roaming 1|mm | nl80211: Supported cipher 00-0f-ac:1 1|mm | nl80211: Supported cipher 00-0f-ac:5 1|mm | nl80211: Supported cipher 00-0f-ac:2 1|mm | nl80211: Supported cipher 00-0f-ac:4 1|mm | nl80211: Using driver-based off-channel TX 1|mm | nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1 1|mm | nl80211: Use separate P2P group interface (driver advertised support) 1|mm | nl80211: Enable multi-channel concurrent (driver advertised support) 1|mm | nl80211: use P2P_DEVICE support 1|mm | nl80211: interface wlan0 in phy phy0 1|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 1|mm | nl80211: Subscribe to mgmt frames with non-AP handle 0xea8a80 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=0104 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 01 04 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=040a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=040b 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0b 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=040c 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0c 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=040d 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0d 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=090a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=090b 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0b 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=090c 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0c 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=090d 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0d 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=0409506f9a09 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=7f506f9a09 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=0409506f9a1a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 1a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=0801 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 08 01 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=12 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=1): 12 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=06 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=1): 06 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=0a07 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 07 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=0a11 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 11 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=0a1a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 1a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=1101 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 11 01 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=1102 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 11 02 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=0505 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 05 05 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xea8a80 match=0500 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 05 00 1|mm | nl80211: Failed to register Action frame processing - ignore for now 1|mm | rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 1|mm | netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT) 1|mm | Add interface wlan0 to a new radio phy0 1|mm | nl80211: Regulatory information - country=BR (DFS-FCC) 1|mm | nl80211: 2402-2482 @ 40 MHz 20 mBm 1|mm | nl80211: 5170-5250 @ 80 MHz 17 mBm 1|mm | nl80211: 5250-5330 @ 80 MHz 24 mBm (DFS) 1|mm | nl80211: 5490-5730 @ 160 MHz 24 mBm (DFS) 1|mm | nl80211: 5735-5835 @ 80 MHz 30 mBm 1|mm | nl80211: Added 802.11b mode based on 802.11g information 1|mm | nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 1|mm | nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 0|mm | npm 1|mm | wlan0: Own MAC address: b8:27:eb:b7:7c:96 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 1|mm | nl80211: set_key failed; err=-22 Invalid argument) 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 1|mm | nl80211: set_key failed; err=-22 Invalid argument) 1|mm | wlan0: RSN: flushing PMKID list in the driver 1|mm | nl80211: Flush PMKIDs 0|mm | ERR! code ENOENT 0|mm | npm ERR! syscall open 0|mm | npm ERR! path /root/package.json 0|mm | npm ERR! 0|mm | errno -2 0|mm | npm 0|mm | ERR! enoent ENOENT: no such file or directory, open '/root/package.json' 0|mm | npm ERR! enoent This is related to npm not being able to find a file. 0|mm | npm ERR! enoent 1|mm | TDLS: TDLS operation not supported by driver 1|mm | TDLS: Driver uses internal link setup 1|mm | TDLS: Driver does not support TDLS channel switching 1|mm | wlan0: WPS: UUID based on MAC address: a45bde59-72ec-5544-b55e-be60a1c0f5ed 1|mm | ENGINE: Loading builtin engines 1|mm | ENGINE: Loading builtin engines 1|mm | EAPOL: SUPP_PAE entering state DISCONNECTED 1|mm | EAPOL: Supplicant port status: Unauthorized 1|mm | nl80211: Skip set_supp_port(unauthorized) while not associated 1|mm | EAPOL: KEY_RX entering state NO_KEY_RECEIVE 1|mm | EAPOL: SUPP_BE entering state INITIALIZE 1|mm | EAP: EAP entering state DISABLED 1|mm | Using existing control interface directory. 1|mm | ctrl_interface_group=109 (from group name 'netdev') 1|mm | ctrl_iface bind(PF_UNIX) failed: Address already in use 1|mm | ctrl_iface exists and seems to be in use - cannot override it 1|mm | Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore 1|mm | Failed to initialize control interface 'DIR=/var/run/wpa_supplicant GROUP=netdev'. 1|mm | You may have another wpa_supplicant process already running or the file was 1|mm | left by an unclean termination of wpa_supplicant in which case you will need 1|mm | to manually remove this file before starting wpa_supplicant again. 1|mm | Failed to add interface wlan0 1|mm | wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 (DEAUTH_LEAVING) state=DISCONNECTED 1|mm | TDLS: Tear down peers 1|mm | nl80211: Data frame filter flags=0x0 1|mm | wlan0: State: DISCONNECTED -> DISCONNECTED 1|mm | nl80211: Set wlan0 operstate 0->0 (DORMANT) 1|mm | netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) 1|mm | EAPOL: External notification - portEnabled=0 1|mm | EAPOL: External notification - portValid=0 0|mm | npm ERR! A complete log of this run can be found in: 0|mm | npm ERR! /root/.npm/_logs/2022-10-28T23_40_14_582Z-debug.log 0|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory 1|mm | wlan0: WPA: Clear old PMK and PTK 1|mm | wlan0: Cancelling delayed sched scan 1|mm | wlan0: Cancelling scan request 1|mm | wlan0: Cancelling authentication timeout 1|mm | Off-channel: Clear pending Action frame TX (pending_action_tx=(nil) 1|mm | nl80211: Data frame filter flags=0x0 1|mm | Off-channel: Action frame sequence done notification: pending_action_tx=(nil) drv_offchan_tx=1 action_tx_wait_time=0 off_channel_freq=0 roc_waiting_drv_freq=0 1|mm | Remove interface wlan0 from radio phy0 1|mm | Remove radio phy0 1|mm | nl80211: deinit ifname=wlan0 disabled_11b_rates=0 1|mm | nl80211: Remove monitor interface: refcount=0 1|mm | netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) 1|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 1|mm | nl80211: Unsubscribe mgmt frames handle 0x88620209 (mode change) 0|mm | wpa_supplicant v2.9 0|mm | random: getrandom() support available 0|mm | Successfully initialized wpa_supplicant 0|mm | Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' 0|mm | Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' 0|mm | Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' 0|mm | ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=netdev' 0|mm | update_config=1 0|mm | country='BR' ^C root@raspberrypi:/home/pi# pm2 logs mm [TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option) /root/.pm2/logs/mm-error.log last 15 lines: 0|mm | 0|mm | npm ERR! A complete log of this run can be found in: 0|mm | npm ERR! /root/.npm/_logs/2022-10-28T23_41_59_809Z-debug.log 0|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory 0|mm | npm ERR! code ENOENT 0|mm | npm ERR! syscall open 0|mm | npm ERR! path /root/package.json 0|mm | npm ERR! errno -2 0|mm | npm ERR! enoent ENOENT: no such file or directory, open '/root/package.json' 0|mm | npm ERR! enoent This is related to npm not being able to find a file. 0|mm | npm ERR! enoent 0|mm | 0|mm | npm ERR! A complete log of this run can be found in: 0|mm | npm ERR! /root/.npm/_logs/2022-10-28T23_42_00_054Z-debug.log 0|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory /root/.pm2/logs/mm-out.log last 15 lines: 0|mm | EAPOL: External notification - portValid=0 0|mm | wlan0: WPA: Clear old PMK and PTK 0|mm | wlan0: Cancelling delayed sched scan 0|mm | wlan0: Cancelling scan request 0|mm | wlan0: Cancelling authentication timeout 0|mm | Off-channel: Clear pending Action frame TX (pending_action_tx=(nil) 0|mm | nl80211: Data frame filter flags=0x0 0|mm | Off-channel: Action frame sequence done notification: pending_action_tx=(nil) drv_offchan_tx=1 action_tx_wait_time=0 off_channel_freq=0 roc_waiting_drv_freq=0 0|mm | Remove interface wlan0 from radio phy0 0|mm | Remove radio phy0 0|mm | nl80211: deinit ifname=wlan0 disabled_11b_rates=0 0|mm | nl80211: Remove monitor interface: refcount=0 0|mm | netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) 0|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 0|mm | nl80211: Unsubscribe mgmt frames handle 0x8876e209 (mode change) 0|mm | npm 0|mm | 0|mm | ERR! code ENOENT 0|mm | npm ERR! syscall open 0|mm | npm ERR! path /root/package.json 0|mm | npm ERR! errno -2 0|mm | npm 0|mm | ERR! enoent ENOENT: no such file or directory, open '/root/package.json' 0|mm | npm ERR! enoent This is related to npm not being able to find a file. 0|mm | npm ERR! enoent 0|mm | npm ERR! A complete log of this run can be found in: 0|mm | npm 0|mm | ERR! /root/.npm/_logs/2022-10-28T23_42_04_595Z-debug.log 0|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory 1|mm | npm 1|mm | 1|mm | ERR! code ENOENT 1|mm | npm ERR! syscall open 1|mm | npm ERR! 1|mm | path /root/package.json 1|mm | npm 1|mm | ERR! errno -2 1|mm | npm 1|mm | ERR! enoent ENOENT: no such file or directory, open '/root/package.json' 1|mm | npm ERR! enoent This is related to npm not being able to find a file. 1|mm | npm ERR! enoent 0|mm | wpa_supplicant v2.9 0|mm | random: getrandom() support available 0|mm | Successfully initialized wpa_supplicant 0|mm | Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' 0|mm | Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' 0|mm | Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' 0|mm | ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=netdev' 0|mm | update_config=1 0|mm | country='BR' 1|mm | npm ERR! A complete log of this run can be found in: 1|mm | npm ERR! 1|mm | /root/.npm/_logs/2022-10-28T23_42_04_814Z-debug.log 0|mm | Priority group 0 0|mm | id=0 ssid='Magic kingdom' 0|mm | nl80211: Using driver-based roaming 0|mm | nl80211: Supported cipher 00-0f-ac:1 0|mm | nl80211: Supported cipher 00-0f-ac:5 0|mm | nl80211: Supported cipher 00-0f-ac:2 0|mm | nl80211: Supported cipher 00-0f-ac:4 0|mm | nl80211: Using driver-based off-channel TX 0|mm | nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1 0|mm | nl80211: Use separate P2P group interface (driver advertised support) 0|mm | nl80211: Enable multi-channel concurrent (driver advertised support) 0|mm | nl80211: use P2P_DEVICE support 0|mm | nl80211: interface wlan0 in phy phy0 0|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 0|mm | nl80211: Subscribe to mgmt frames with non-AP handle 0x11b9a80 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=0104 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 01 04 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=040a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=040b 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0b 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=040c 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0c 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=040d 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0d 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=090a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=090b 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0b 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=090c 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0c 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=090d 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0d 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=0409506f9a09 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=7f506f9a09 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=0409506f9a1a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 1a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=0801 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 08 01 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=12 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=1): 12 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=06 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=1): 06 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=0a07 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 0a 07 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=0a11 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 0a 11 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=0a1a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 0a 1a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=1101 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 11 01 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=1102 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 11 02 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=0505 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 05 05 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x11b9a80 match=0500 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 05 00 0|mm | nl80211: Failed to register Action frame processing - ignore for now 0|mm | rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 0|mm | netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT) 0|mm | Add interface wlan0 to a new radio phy0 0|mm | nl80211: Regulatory information - country=BR (DFS-FCC) 0|mm | nl80211: 2402-2482 @ 40 MHz 20 mBm 0|mm | nl80211: 5170-5250 @ 80 MHz 17 mBm 0|mm | nl80211: 5250-5330 @ 80 MHz 24 mBm (DFS) 0|mm | nl80211: 5490-5730 @ 160 MHz 24 mBm (DFS) 0|mm | nl80211: 5735-5835 @ 80 MHz 30 mBm 0|mm | nl80211: Added 802.11b mode based on 802.11g information 0|mm | nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 0|mm | nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 1|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory 0|mm | wlan0: Own MAC address: b8:27:eb:b7:7c:96 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 0|mm | nl80211: set_key failed; err=-22 Invalid argument) 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 0|mm | nl80211: set_key failed; err=-22 Invalid argument) 0|mm | wlan0: RSN: flushing PMKID list in the driver 0|mm | nl80211: Flush PMKIDs 0|mm | TDLS: TDLS operation not supported by driver 0|mm | TDLS: Driver uses internal link setup 0|mm | TDLS: Driver does not support TDLS channel switching 0|mm | wlan0: WPS: UUID based on MAC address: a45bde59-72ec-5544-b55e-be60a1c0f5ed 0|mm | ENGINE: Loading builtin engines 0|mm | ENGINE: Loading builtin engines 0|mm | EAPOL: SUPP_PAE entering state DISCONNECTED 0|mm | EAPOL: Supplicant port status: Unauthorized 0|mm | nl80211: Skip set_supp_port(unauthorized) while not associated 0|mm | EAPOL: KEY_RX entering state NO_KEY_RECEIVE 0|mm | EAPOL: SUPP_BE entering state INITIALIZE 0|mm | EAP: EAP entering state DISABLED 0|mm | Using existing control interface directory. 0|mm | ctrl_interface_group=109 (from group name 'netdev') 0|mm | ctrl_iface bind(PF_UNIX) failed: Address already in use 0|mm | ctrl_iface exists and seems to be in use - cannot override it 0|mm | Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore 0|mm | Failed to initialize control interface 'DIR=/var/run/wpa_supplicant GROUP=netdev'. 0|mm | You may have another wpa_supplicant process already running or the file was 0|mm | left by an unclean termination of wpa_supplicant in which case you will need 0|mm | to manually remove this file before starting wpa_supplicant again. 0|mm | Failed to add interface wlan0 0|mm | wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 (DEAUTH_LEAVING) state=DISCONNECTED 0|mm | TDLS: Tear down peers 0|mm | nl80211: Data frame filter flags=0x0 0|mm | wlan0: State: DISCONNECTED -> DISCONNECTED 0|mm | nl80211: Set wlan0 operstate 0->0 (DORMANT) 0|mm | netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) 0|mm | EAPOL: External notification - portEnabled=0 0|mm | EAPOL: External notification - portValid=0 1|mm | wpa_supplicant v2.9 1|mm | random: getrandom() support available 1|mm | Successfully initialized wpa_supplicant 1|mm | Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' 1|mm | Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' 1|mm | Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' 1|mm | ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=netdev' 1|mm | update_config=1 1|mm | country='BR' 1|mm | Priority group 0 1|mm | id=0 ssid='Magic kingdom' 1|mm | nl80211: Using driver-based roaming 1|mm | nl80211: Supported cipher 00-0f-ac:1 1|mm | nl80211: Supported cipher 00-0f-ac:5 1|mm | nl80211: Supported cipher 00-0f-ac:2 1|mm | nl80211: Supported cipher 00-0f-ac:4 1|mm | nl80211: Using driver-based off-channel TX 1|mm | nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1 1|mm | nl80211: Use separate P2P group interface (driver advertised support) 1|mm | nl80211: Enable multi-channel concurrent (driver advertised support) 1|mm | nl80211: use P2P_DEVICE support 1|mm | nl80211: interface wlan0 in phy phy0 1|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 1|mm | nl80211: Subscribe to mgmt frames with non-AP handle 0x177ca80 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=0104 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 01 04 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=040a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=040b 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0b 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=040c 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0c 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=040d 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0d 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=090a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=090b 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0b 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=090c 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0c 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=090d 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0d 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=0409506f9a09 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=7f506f9a09 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=0409506f9a1a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 1a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=0801 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 08 01 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=12 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=1): 12 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=06 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=1): 06 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=0a07 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 07 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=0a11 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 11 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=0a1a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 1a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=1101 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 11 01 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=1102 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 11 02 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=0505 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 05 05 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x177ca80 match=0500 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 05 00 1|mm | nl80211: Failed to register Action frame processing - ignore for now 1|mm | rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 1|mm | netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT) 1|mm | Add interface wlan0 to a new radio phy0 1|mm | nl80211: Regulatory information - country=BR (DFS-FCC) 1|mm | nl80211: 2402-2482 @ 40 MHz 20 mBm 1|mm | nl80211: 5170-5250 @ 80 MHz 17 mBm 1|mm | nl80211: 5250-5330 @ 80 MHz 24 mBm (DFS) 1|mm | nl80211: 5490-5730 @ 160 MHz 24 mBm (DFS) 1|mm | nl80211: 5735-5835 @ 80 MHz 30 mBm 1|mm | nl80211: Added 802.11b mode based on 802.11g information 1|mm | nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 1|mm | nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 0|mm | wlan0: WPA: Clear old PMK and PTK 0|mm | wlan0: Cancelling delayed sched scan 0|mm | wlan0: Cancelling scan request 0|mm | wlan0: Cancelling authentication timeout 0|mm | Off-channel: Clear pending Action frame TX (pending_action_tx=(nil) 0|mm | nl80211: Data frame filter flags=0x0 0|mm | Off-channel: Action frame sequence done notification: pending_action_tx=(nil) drv_offchan_tx=1 action_tx_wait_time=0 off_channel_freq=0 roc_waiting_drv_freq=0 0|mm | Remove interface wlan0 from radio phy0 0|mm | Remove radio phy0 0|mm | nl80211: deinit ifname=wlan0 disabled_11b_rates=0 0|mm | nl80211: Remove monitor interface: refcount=0 0|mm | netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) 0|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 0|mm | nl80211: Unsubscribe mgmt frames handle 0x89931209 (mode change) 1|mm | wlan0: Own MAC address: b8:27:eb:b7:7c:96 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 1|mm | nl80211: set_key failed; err=-22 Invalid argument) 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 1|mm | nl80211: set_key failed; err=-22 Invalid argument) 1|mm | wlan0: RSN: flushing PMKID list in the driver 1|mm | nl80211: Flush PMKIDs 1|mm | TDLS: TDLS operation not supported by driver 1|mm | TDLS: Driver uses internal link setup 1|mm | TDLS: Driver does not support TDLS channel switching 1|mm | wlan0: WPS: UUID based on MAC address: a45bde59-72ec-5544-b55e-be60a1c0f5ed 1|mm | ENGINE: Loading builtin engines 1|mm | ENGINE: Loading builtin engines 1|mm | EAPOL: SUPP_PAE entering state DISCONNECTED 1|mm | EAPOL: Supplicant port status: Unauthorized 1|mm | nl80211: Skip set_supp_port(unauthorized) while not associated 1|mm | EAPOL: KEY_RX entering state NO_KEY_RECEIVE 1|mm | EAPOL: SUPP_BE entering state INITIALIZE 1|mm | EAP: EAP entering state DISABLED 1|mm | Using existing control interface directory. 1|mm | ctrl_interface_group=109 (from group name 'netdev') 1|mm | ctrl_iface bind(PF_UNIX) failed: Address already in use 1|mm | ctrl_iface exists and seems to be in use - cannot override it 1|mm | Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore 1|mm | Failed to initialize control interface 'DIR=/var/run/wpa_supplicant GROUP=netdev'. 1|mm | You may have another wpa_supplicant process already running or the file was 1|mm | left by an unclean termination of wpa_supplicant in which case you will need 1|mm | to manually remove this file before starting wpa_supplicant again. 1|mm | Failed to add interface wlan0 1|mm | wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 (DEAUTH_LEAVING) state=DISCONNECTED 1|mm | TDLS: Tear down peers 1|mm | nl80211: Data frame filter flags=0x0 1|mm | wlan0: State: DISCONNECTED -> DISCONNECTED 1|mm | nl80211: Set wlan0 operstate 0->0 (DORMANT) 1|mm | netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) 1|mm | EAPOL: External notification - portEnabled=0 1|mm | EAPOL: External notification - portValid=0 1|mm | wlan0: WPA: Clear old PMK and PTK 1|mm | wlan0: Cancelling delayed sched scan 1|mm | wlan0: Cancelling scan request 1|mm | wlan0: Cancelling authentication timeout 1|mm | Off-channel: Clear pending Action frame TX (pending_action_tx=(nil) 1|mm | nl80211: Data frame filter flags=0x0 1|mm | Off-channel: Action frame sequence done notification: pending_action_tx=(nil) drv_offchan_tx=1 action_tx_wait_time=0 off_channel_freq=0 roc_waiting_drv_freq=0 1|mm | Remove interface wlan0 from radio phy0 1|mm | Remove radio phy0 1|mm | nl80211: deinit ifname=wlan0 disabled_11b_rates=0 1|mm | nl80211: Remove monitor interface: refcount=0 1|mm | netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) 1|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 1|mm | nl80211: Unsubscribe mgmt frames handle 0x89ff4209 (mode change) 0|mm | npm 0|mm | 0|mm | ERR! code ENOENT 0|mm | npm ERR! syscall open 0|mm | npm ERR! 0|mm | path /root/package.json 0|mm | npm ERR! errno -2 0|mm | npm 0|mm | ERR! enoent ENOENT: no such file or directory, open '/root/package.json' 0|mm | npm ERR! enoent This is related to npm not being able to find a file. 0|mm | npm ERR! enoent 0|mm | npm ERR! 0|mm | A complete log of this run can be found in: 0|mm | npm ERR! /root/.npm/_logs/2022-10-28T23_42_09_146Z-debug.log 0|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory 0|mm | wpa_supplicant v2.9 0|mm | random: getrandom() support available 0|mm | Successfully initialized wpa_supplicant 0|mm | Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' 0|mm | Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' 0|mm | Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' 0|mm | ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=netdev' 0|mm | update_config=1 0|mm | country='BR' 0|mm | Priority group 0 0|mm | id=0 ssid='Magic kingdom' 0|mm | nl80211: Using driver-based roaming 0|mm | nl80211: Supported cipher 00-0f-ac:1 0|mm | nl80211: Supported cipher 00-0f-ac:5 0|mm | nl80211: Supported cipher 00-0f-ac:2 0|mm | nl80211: Supported cipher 00-0f-ac:4 0|mm | nl80211: Using driver-based off-channel TX 0|mm | nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1 0|mm | nl80211: Use separate P2P group interface (driver advertised support) 0|mm | nl80211: Enable multi-channel concurrent (driver advertised support) 0|mm | nl80211: use P2P_DEVICE support 0|mm | nl80211: interface wlan0 in phy phy0 0|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 0|mm | nl80211: Subscribe to mgmt frames with non-AP handle 0xfe9a80 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=0104 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 01 04 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=040a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=040b 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0b 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=040c 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0c 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=040d 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0d 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=090a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=090b 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0b 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=090c 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0c 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=090d 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0d 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=0409506f9a09 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=7f506f9a09 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=0409506f9a1a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 1a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=0801 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 08 01 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=12 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=1): 12 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=06 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=1): 06 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=0a07 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 0a 07 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=0a11 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 0a 11 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=0a1a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 0a 1a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=1101 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 11 01 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=1102 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 11 02 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=0505 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 05 05 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xfe9a80 match=0500 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 05 00 0|mm | nl80211: Failed to register Action frame processing - ignore for now 0|mm | rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 0|mm | netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT) 0|mm | Add interface wlan0 to a new radio phy0 0|mm | nl80211: Regulatory information - country=BR (DFS-FCC) 0|mm | nl80211: 2402-2482 @ 40 MHz 20 mBm 0|mm | nl80211: 5170-5250 @ 80 MHz 17 mBm 0|mm | nl80211: 5250-5330 @ 80 MHz 24 mBm (DFS) 0|mm | nl80211: 5490-5730 @ 160 MHz 24 mBm (DFS) 0|mm | nl80211: 5735-5835 @ 80 MHz 30 mBm 0|mm | nl80211: Added 802.11b mode based on 802.11g information 0|mm | nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 0|mm | nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 1|mm | npm 0|mm | wlan0: Own MAC address: b8:27:eb:b7:7c:96 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 0|mm | nl80211: set_key failed; err=-22 Invalid argument) 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 0|mm | nl80211: set_key failed; err=-22 Invalid argument) 0|mm | wlan0: RSN: flushing PMKID list in the driver 0|mm | nl80211: Flush PMKIDs 1|mm | ERR! 1|mm | code ENOENT 1|mm | npm ERR! syscall open 1|mm | npm ERR! path /root/package.json 1|mm | npm ERR! errno -2 1|mm | npm 1|mm | ERR! enoent ENOENT: no such file or directory, open '/root/package.json' 1|mm | npm ERR! enoent This is related to npm not being able to find a file. 1|mm | npm ERR! 1|mm | enoent 0|mm | TDLS: TDLS operation not supported by driver 0|mm | TDLS: Driver uses internal link setup 0|mm | TDLS: Driver does not support TDLS channel switching 0|mm | wlan0: WPS: UUID based on MAC address: a45bde59-72ec-5544-b55e-be60a1c0f5ed 0|mm | ENGINE: Loading builtin engines 0|mm | ENGINE: Loading builtin engines 0|mm | EAPOL: SUPP_PAE entering state DISCONNECTED 0|mm | EAPOL: Supplicant port status: Unauthorized 0|mm | nl80211: Skip set_supp_port(unauthorized) while not associated 0|mm | EAPOL: KEY_RX entering state NO_KEY_RECEIVE 0|mm | EAPOL: SUPP_BE entering state INITIALIZE 0|mm | EAP: EAP entering state DISABLED 0|mm | Using existing control interface directory. 0|mm | ctrl_interface_group=109 (from group name 'netdev') 0|mm | ctrl_iface bind(PF_UNIX) failed: Address already in use 0|mm | ctrl_iface exists and seems to be in use - cannot override it 0|mm | Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore 0|mm | Failed to initialize control interface 'DIR=/var/run/wpa_supplicant GROUP=netdev'. 0|mm | You may have another wpa_supplicant process already running or the file was 0|mm | left by an unclean termination of wpa_supplicant in which case you will need 0|mm | to manually remove this file before starting wpa_supplicant again. 0|mm | Failed to add interface wlan0 0|mm | wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 (DEAUTH_LEAVING) state=DISCONNECTED 0|mm | TDLS: Tear down peers 0|mm | nl80211: Data frame filter flags=0x0 0|mm | wlan0: State: DISCONNECTED -> DISCONNECTED 0|mm | nl80211: Set wlan0 operstate 0->0 (DORMANT) 0|mm | netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) 0|mm | EAPOL: External notification - portEnabled=0 0|mm | EAPOL: External notification - portValid=0 1|mm | npm 1|mm | 1|mm | ERR! A complete log of this run can be found in: 1|mm | npm ERR! /root/.npm/_logs/2022-10-28T23_42_09_547Z-debug.log 0|mm | wlan0: WPA: Clear old PMK and PTK 0|mm | wlan0: Cancelling delayed sched scan 0|mm | wlan0: Cancelling scan request 0|mm | wlan0: Cancelling authentication timeout 0|mm | Off-channel: Clear pending Action frame TX (pending_action_tx=(nil) 0|mm | nl80211: Data frame filter flags=0x0 0|mm | Off-channel: Action frame sequence done notification: pending_action_tx=(nil) drv_offchan_tx=1 action_tx_wait_time=0 off_channel_freq=0 roc_waiting_drv_freq=0 0|mm | Remove interface wlan0 from radio phy0 0|mm | Remove radio phy0 0|mm | nl80211: deinit ifname=wlan0 disabled_11b_rates=0 1|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory 0|mm | nl80211: Remove monitor interface: refcount=0 0|mm | netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) 0|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 0|mm | nl80211: Unsubscribe mgmt frames handle 0x88761209 (mode change) 1|mm | wpa_supplicant v2.9 1|mm | random: getrandom() support available 1|mm | Successfully initialized wpa_supplicant 1|mm | Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' 1|mm | Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' 1|mm | Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' 1|mm | ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=netdev' 1|mm | update_config=1 1|mm | country='BR' 1|mm | Priority group 0 1|mm | id=0 ssid='Magic kingdom' 1|mm | nl80211: Using driver-based roaming 1|mm | nl80211: Supported cipher 00-0f-ac:1 1|mm | nl80211: Supported cipher 00-0f-ac:5 1|mm | nl80211: Supported cipher 00-0f-ac:2 1|mm | nl80211: Supported cipher 00-0f-ac:4 1|mm | nl80211: Using driver-based off-channel TX 1|mm | nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1 1|mm | nl80211: Use separate P2P group interface (driver advertised support) 1|mm | nl80211: Enable multi-channel concurrent (driver advertised support) 1|mm | nl80211: use P2P_DEVICE support 1|mm | nl80211: interface wlan0 in phy phy0 1|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 1|mm | nl80211: Subscribe to mgmt frames with non-AP handle 0xde4a80 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=0104 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 01 04 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=040a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=040b 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0b 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=040c 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0c 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=040d 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0d 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=090a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=090b 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0b 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=090c 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0c 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=090d 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0d 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=0409506f9a09 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=7f506f9a09 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=0409506f9a1a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 1a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=0801 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 08 01 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=12 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=1): 12 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=06 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=1): 06 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=0a07 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 07 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=0a11 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 11 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=0a1a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 1a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=1101 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 11 01 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=1102 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 11 02 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=0505 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 05 05 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xde4a80 match=0500 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 05 00 1|mm | nl80211: Failed to register Action frame processing - ignore for now 1|mm | rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 1|mm | netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT) 1|mm | Add interface wlan0 to a new radio phy0 1|mm | nl80211: Regulatory information - country=BR (DFS-FCC) 1|mm | nl80211: 2402-2482 @ 40 MHz 20 mBm 1|mm | nl80211: 5170-5250 @ 80 MHz 17 mBm 1|mm | nl80211: 5250-5330 @ 80 MHz 24 mBm (DFS) 1|mm | nl80211: 5490-5730 @ 160 MHz 24 mBm (DFS) 1|mm | nl80211: 5735-5835 @ 80 MHz 30 mBm 1|mm | nl80211: Added 802.11b mode based on 802.11g information 1|mm | nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 1|mm | nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 1|mm | wlan0: Own MAC address: b8:27:eb:b7:7c:96 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 1|mm | nl80211: set_key failed; err=-22 Invalid argument) 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 1|mm | nl80211: set_key failed; err=-22 Invalid argument) 1|mm | wlan0: RSN: flushing PMKID list in the driver 1|mm | nl80211: Flush PMKIDs 1|mm | TDLS: TDLS operation not supported by driver 1|mm | TDLS: Driver uses internal link setup 1|mm | TDLS: Driver does not support TDLS channel switching 1|mm | wlan0: WPS: UUID based on MAC address: a45bde59-72ec-5544-b55e-be60a1c0f5ed 1|mm | ENGINE: Loading builtin engines 1|mm | ENGINE: Loading builtin engines 1|mm | EAPOL: SUPP_PAE entering state DISCONNECTED 1|mm | EAPOL: Supplicant port status: Unauthorized 1|mm | nl80211: Skip set_supp_port(unauthorized) while not associated 1|mm | EAPOL: KEY_RX entering state NO_KEY_RECEIVE 1|mm | EAPOL: SUPP_BE entering state INITIALIZE 1|mm | EAP: EAP entering state DISABLED 1|mm | Using existing control interface directory. 1|mm | ctrl_interface_group=109 (from group name 'netdev') 1|mm | ctrl_iface bind(PF_UNIX) failed: Address already in use 1|mm | ctrl_iface exists and seems to be in use - cannot override it 1|mm | Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore 1|mm | Failed to initialize control interface 'DIR=/var/run/wpa_supplicant GROUP=netdev'. 1|mm | You may have another wpa_supplicant process already running or the file was 1|mm | left by an unclean termination of wpa_supplicant in which case you will need 1|mm | to manually remove this file before starting wpa_supplicant again. 1|mm | Failed to add interface wlan0 1|mm | wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 (DEAUTH_LEAVING) state=DISCONNECTED 1|mm | TDLS: Tear down peers 1|mm | nl80211: Data frame filter flags=0x0 1|mm | wlan0: State: DISCONNECTED -> DISCONNECTED 1|mm | nl80211: Set wlan0 operstate 0->0 (DORMANT) 1|mm | netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) 1|mm | EAPOL: External notification - portEnabled=0 1|mm | EAPOL: External notification - portValid=0 1|mm | wlan0: WPA: Clear old PMK and PTK 1|mm | wlan0: Cancelling delayed sched scan 1|mm | wlan0: Cancelling scan request 1|mm | wlan0: Cancelling authentication timeout 1|mm | Off-channel: Clear pending Action frame TX (pending_action_tx=(nil) 1|mm | nl80211: Data frame filter flags=0x0 1|mm | Off-channel: Action frame sequence done notification: pending_action_tx=(nil) drv_offchan_tx=1 action_tx_wait_time=0 off_channel_freq=0 roc_waiting_drv_freq=0 1|mm | Remove interface wlan0 from radio phy0 1|mm | Remove radio phy0 1|mm | nl80211: deinit ifname=wlan0 disabled_11b_rates=0 1|mm | nl80211: Remove monitor interface: refcount=0 1|mm | netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) 1|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 1|mm | nl80211: Unsubscribe mgmt frames handle 0x8856c209 (mode change) 0|mm | npm 0|mm | 0|mm | ERR! code ENOENT 0|mm | npm ERR! syscall 0|mm | open 0|mm | npm ERR! path /root/package.json 0|mm | npm 0|mm | ERR! errno -2 0|mm | npm 0|mm | ERR! enoent ENOENT: no such file or directory, open '/root/package.json' 0|mm | npm ERR! enoent This is related to npm not being able to find a file. 0|mm | npm ERR! enoent 0|mm | 0|mm | npm 0|mm | ERR! A complete log of this run can be found in: 0|mm | npm ERR! /root/.npm/_logs/2022-10-28T23_42_13_843Z-debug.log 0|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory 0|mm | wpa_supplicant v2.9 0|mm | random: getrandom() support available 0|mm | Successfully initialized wpa_supplicant 0|mm | Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' 0|mm | Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' 0|mm | Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' 0|mm | ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=netdev' 0|mm | update_config=1 0|mm | country='BR' 0|mm | Priority group 0 0|mm | id=0 ssid='Magic kingdom' 0|mm | nl80211: Using driver-based roaming 0|mm | nl80211: Supported cipher 00-0f-ac:1 0|mm | nl80211: Supported cipher 00-0f-ac:5 0|mm | nl80211: Supported cipher 00-0f-ac:2 0|mm | nl80211: Supported cipher 00-0f-ac:4 0|mm | nl80211: Using driver-based off-channel TX 0|mm | nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1 0|mm | nl80211: Use separate P2P group interface (driver advertised support) 0|mm | nl80211: Enable multi-channel concurrent (driver advertised support) 0|mm | nl80211: use P2P_DEVICE support 0|mm | nl80211: interface wlan0 in phy phy0 0|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 0|mm | nl80211: Subscribe to mgmt frames with non-AP handle 0xe8aa80 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=0104 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 01 04 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=040a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=040b 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0b 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=040c 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0c 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=040d 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 04 0d 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=090a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=090b 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0b 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=090c 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0c 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=090d 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 09 0d 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=0409506f9a09 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=7f506f9a09 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=0409506f9a1a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 1a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=0801 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 08 01 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=12 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=1): 12 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=06 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=1): 06 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=0a07 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 0a 07 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=0a11 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 0a 11 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=0a1a 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 0a 1a 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=1101 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 11 01 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=1102 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 11 02 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=0505 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 05 05 0|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xe8aa80 match=0500 0|mm | nl80211: kernel reports: Match already configured 0|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 0|mm | nl80211: Register frame match - hexdump(len=2): 05 00 0|mm | nl80211: Failed to register Action frame processing - ignore for now 0|mm | rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 0|mm | netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT) 0|mm | Add interface wlan0 to a new radio phy0 0|mm | nl80211: Regulatory information - country=BR (DFS-FCC) 0|mm | nl80211: 2402-2482 @ 40 MHz 20 mBm 0|mm | nl80211: 5170-5250 @ 80 MHz 17 mBm 0|mm | nl80211: 5250-5330 @ 80 MHz 24 mBm (DFS) 0|mm | nl80211: 5490-5730 @ 160 MHz 24 mBm (DFS) 0|mm | nl80211: 5735-5835 @ 80 MHz 30 mBm 0|mm | nl80211: Added 802.11b mode based on 802.11g information 0|mm | nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 0|mm | nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 0|mm | wlan0: Own MAC address: b8:27:eb:b7:7c:96 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 0|mm | nl80211: set_key failed; err=-22 Invalid argument) 0|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 0|mm | nl80211: set_key failed; err=-22 Invalid argument) 0|mm | wlan0: RSN: flushing PMKID list in the driver 0|mm | nl80211: Flush PMKIDs 1|mm | npm 1|mm | 1|mm | ERR! code ENOENT 1|mm | npm ERR! syscall 1|mm | open 1|mm | npm ERR! path /root/package.json 1|mm | npm ERR! errno -2 0|mm | TDLS: TDLS operation not supported by driver 0|mm | TDLS: Driver uses internal link setup 0|mm | TDLS: Driver does not support TDLS channel switching 0|mm | wlan0: WPS: UUID based on MAC address: a45bde59-72ec-5544-b55e-be60a1c0f5ed 1|mm | npm 1|mm | ERR! enoent ENOENT: no such file or directory, open '/root/package.json' 1|mm | npm ERR! enoent This is related to npm not being able to find a file. 1|mm | npm ERR! 1|mm | enoent 0|mm | ENGINE: Loading builtin engines 0|mm | ENGINE: Loading builtin engines 0|mm | EAPOL: SUPP_PAE entering state DISCONNECTED 0|mm | EAPOL: Supplicant port status: Unauthorized 0|mm | nl80211: Skip set_supp_port(unauthorized) while not associated 0|mm | EAPOL: KEY_RX entering state NO_KEY_RECEIVE 0|mm | EAPOL: SUPP_BE entering state INITIALIZE 0|mm | EAP: EAP entering state DISABLED 0|mm | Using existing control interface directory. 0|mm | ctrl_interface_group=109 (from group name 'netdev') 0|mm | ctrl_iface bind(PF_UNIX) failed: Address already in use 0|mm | ctrl_iface exists and seems to be in use - cannot override it 0|mm | Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore 0|mm | Failed to initialize control interface 'DIR=/var/run/wpa_supplicant GROUP=netdev'. 0|mm | You may have another wpa_supplicant process already running or the file was 0|mm | left by an unclean termination of wpa_supplicant in which case you will need 0|mm | to manually remove this file before starting wpa_supplicant again. 0|mm | Failed to add interface wlan0 0|mm | wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 (DEAUTH_LEAVING) state=DISCONNECTED 0|mm | TDLS: Tear down peers 0|mm | nl80211: Data frame filter flags=0x0 0|mm | wlan0: State: DISCONNECTED -> DISCONNECTED 0|mm | nl80211: Set wlan0 operstate 0->0 (DORMANT) 0|mm | netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) 0|mm | EAPOL: External notification - portEnabled=0 0|mm | EAPOL: External notification - portValid=0 1|mm | npm ERR! 1|mm | A complete log of this run can be found in: 1|mm | npm ERR! /root/.npm/_logs/2022-10-28T23_42_14_283Z-debug.log 0|mm | wlan0: WPA: Clear old PMK and PTK 0|mm | wlan0: Cancelling delayed sched scan 0|mm | wlan0: Cancelling scan request 0|mm | wlan0: Cancelling authentication timeout 0|mm | Off-channel: Clear pending Action frame TX (pending_action_tx=(nil) 0|mm | nl80211: Data frame filter flags=0x0 0|mm | Off-channel: Action frame sequence done notification: pending_action_tx=(nil) drv_offchan_tx=1 action_tx_wait_time=0 off_channel_freq=0 roc_waiting_drv_freq=0 0|mm | Remove interface wlan0 from radio phy0 0|mm | Remove radio phy0 0|mm | nl80211: deinit ifname=wlan0 disabled_11b_rates=0 0|mm | nl80211: Remove monitor interface: refcount=0 0|mm | netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) 0|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 0|mm | nl80211: Unsubscribe mgmt frames handle 0x88602209 (mode change) 1|mm | /root/mm.sh: line 1: cd: /root/MagicMirror: No such file or directory 1|mm | wpa_supplicant v2.9 1|mm | random: getrandom() support available 1|mm | Successfully initialized wpa_supplicant 1|mm | Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' 1|mm | Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf' 1|mm | Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' 1|mm | ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=netdev' 1|mm | update_config=1 1|mm | country='BR' 1|mm | Priority group 0 1|mm | id=0 ssid='Magic kingdom' 1|mm | nl80211: Using driver-based roaming 1|mm | nl80211: Supported cipher 00-0f-ac:1 1|mm | nl80211: Supported cipher 00-0f-ac:5 1|mm | nl80211: Supported cipher 00-0f-ac:2 1|mm | nl80211: Supported cipher 00-0f-ac:4 1|mm | nl80211: Using driver-based off-channel TX 1|mm | nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1 1|mm | nl80211: Use separate P2P group interface (driver advertised support) 1|mm | nl80211: Enable multi-channel concurrent (driver advertised support) 1|mm | nl80211: use P2P_DEVICE support 1|mm | nl80211: interface wlan0 in phy phy0 1|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 1|mm | nl80211: Subscribe to mgmt frames with non-AP handle 0x1d50a80 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=0104 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 01 04 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=040a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=040b 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0b 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=040c 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0c 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=040d 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 04 0d 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=090a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=090b 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0b 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=090c 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0c 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=090d 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 09 0d 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=0409506f9a09 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=7f506f9a09 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=0409506f9a1a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 1a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=0801 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 08 01 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=12 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=1): 12 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=06 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=1): 06 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=0a07 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 07 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=0a11 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 11 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=0a1a 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 0a 1a 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=1101 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 11 01 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=1102 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 11 02 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=0505 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 05 05 1|mm | nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1d50a80 match=0500 1|mm | nl80211: kernel reports: Match already configured 1|mm | nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) 1|mm | nl80211: Register frame match - hexdump(len=2): 05 00 1|mm | nl80211: Failed to register Action frame processing - ignore for now 1|mm | rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 1|mm | netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT) 1|mm | Add interface wlan0 to a new radio phy0 1|mm | nl80211: Regulatory information - country=BR (DFS-FCC) 1|mm | nl80211: 2402-2482 @ 40 MHz 20 mBm 1|mm | nl80211: 5170-5250 @ 80 MHz 17 mBm 1|mm | nl80211: 5250-5330 @ 80 MHz 24 mBm (DFS) 1|mm | nl80211: 5490-5730 @ 160 MHz 24 mBm (DFS) 1|mm | nl80211: 5735-5835 @ 80 MHz 30 mBm 1|mm | nl80211: Added 802.11b mode based on 802.11g information 1|mm | nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 1|mm | nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED] 1|mm | wlan0: Own MAC address: b8:27:eb:b7:7c:96 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 1|mm | nl80211: set_key failed; err=-22 Invalid argument) 1|mm | wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 1|mm | nl80211: set_key failed; err=-22 Invalid argument) 1|mm | wlan0: RSN: flushing PMKID list in the driver 1|mm | nl80211: Flush PMKIDs 1|mm | TDLS: TDLS operation not supported by driver 1|mm | TDLS: Driver uses internal link setup 1|mm | TDLS: Driver does not support TDLS channel switching 1|mm | wlan0: WPS: UUID based on MAC address: a45bde59-72ec-5544-b55e-be60a1c0f5ed 1|mm | ENGINE: Loading builtin engines 1|mm | ENGINE: Loading builtin engines 1|mm | EAPOL: SUPP_PAE entering state DISCONNECTED 1|mm | EAPOL: Supplicant port status: Unauthorized 1|mm | nl80211: Skip set_supp_port(unauthorized) while not associated 1|mm | EAPOL: KEY_RX entering state NO_KEY_RECEIVE 1|mm | EAPOL: SUPP_BE entering state INITIALIZE 1|mm | EAP: EAP entering state DISABLED 1|mm | Using existing control interface directory. 1|mm | ctrl_interface_group=109 (from group name 'netdev') 1|mm | ctrl_iface bind(PF_UNIX) failed: Address already in use 1|mm | ctrl_iface exists and seems to be in use - cannot override it 1|mm | Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore 1|mm | Failed to initialize control interface 'DIR=/var/run/wpa_supplicant GROUP=netdev'. 1|mm | You may have another wpa_supplicant process already running or the file was 1|mm | left by an unclean termination of wpa_supplicant in which case you will need 1|mm | to manually remove this file before starting wpa_supplicant again. 1|mm | Failed to add interface wlan0 1|mm | wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 (DEAUTH_LEAVING) state=DISCONNECTED 1|mm | TDLS: Tear down peers 1|mm | nl80211: Data frame filter flags=0x0 1|mm | wlan0: State: DISCONNECTED -> DISCONNECTED 1|mm | nl80211: Set wlan0 operstate 0->0 (DORMANT) 1|mm | netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) 1|mm | EAPOL: External notification - portEnabled=0 1|mm | EAPOL: External notification - portValid=0 1|mm | wlan0: WPA: Clear old PMK and PTK 1|mm | wlan0: Cancelling delayed sched scan 1|mm | wlan0: Cancelling scan request 1|mm | wlan0: Cancelling authentication timeout 1|mm | Off-channel: Clear pending Action frame TX (pending_action_tx=(nil) 1|mm | nl80211: Data frame filter flags=0x0 1|mm | Off-channel: Action frame sequence done notification: pending_action_tx=(nil) drv_offchan_tx=1 action_tx_wait_time=0 off_channel_freq=0 roc_waiting_drv_freq=0 1|mm | Remove interface wlan0 from radio phy0 1|mm | Remove radio phy0 1|mm | nl80211: deinit ifname=wlan0 disabled_11b_rates=0 1|mm | nl80211: Remove monitor interface: refcount=0 1|mm | netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) 1|mm | nl80211: Set mode ifindex 3 iftype 2 (STATION) 1|mm | nl80211: Unsubscribe mgmt frames handle 0x895d8209 (mode change)