Untitled

avatar
unknown
plain_text
9 months ago
15 kB
7
Indexable
// Script File Name : nvram.txt
// Created on 01/15/25 at 17:16:09    
// AMISCE Utility. Ver 5.05.01.0002
// Copyright (c) 2021 AMI. All rights reserved.
HIICrc32= 1FCB4C68

Setup Question	=   Wi-Fi Core
Help String	= This is an option intended to Enable/Disable Wi-Fi Core in CNVi
Token	=3BB	// Do NOT change this line
Offset	=737
Width	=01
BIOS Default	=[01]Enabled 
Options	=[01]Enabled	// Move "*" to the desired Option
         *[00]Disabled

Setup Question	=   BT Core
Help String	= This is an option intended to Enable/Disable BT Core in CNVi
Token	=3BC	// Do NOT change this line
Offset	=738
Width	=01
BIOS Default	=[01]Enabled 
Options	=[01]Enabled	// Move "*" to the desired Option
         *[00]Disabled

Setup Question	= PCI Delay Optimization
Help String	= Experimental ACPI additions for FW latency optimizations
Token	=399	// Do NOT change this line
Offset	=5B
Width	=01
BIOS Default	=[00]Disabled 
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= C6DRAM
Help String	= Enable/disable moving of DRAM contents to PRM memory when CPU is in C6 state
Token	=2725	// Do NOT change this line
Offset	=115
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= PCH Cross Throttling
Help String	= Enable/Disable the PCH Cross Throttling feature. Only ULT support this feature.
Token	=ABC	// Do NOT change this line
Offset	=6C0
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= RC6(Render Standby)
Help String	= Check to enable render standby support.
Token	=6D1	// Do NOT change this line
Offset	=2F
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= PCI Express Power Gating
Help String	= PCI Express Power Gating Enable/Disable for each root port.
Token	=A24	// Do NOT change this line
Offset	=2AB
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= PCI Express Clock Gating
Help String	= PCI Express Clock Gating Enable/Disable for each root port.
Token	=A4E	// Do NOT change this line
Offset	=2A8
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= PCI Express Power Gating
Help String	= PCI Express Power Gating Enable/Disable for each root port.
Token	=A4F	// Do NOT change this line
Offset	=2AC
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled


Setup Question	= PCI Express Clock Gating
Help String	= PCI Express Clock Gating Enable/Disable for each root port.
Token	=A79	// Do NOT change this line
Offset	=2A9
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= PCI Express Power Gating
Help String	= PCI Express Power Gating Enable/Disable for each root port.
Token	=A7A	// Do NOT change this line
Offset	=2AD
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= PCI Express Root Port 3
Help String	= Control the PCI Express Root Port.
Token	=A77	// Do NOT change this line
Offset	=27C
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= WWAN Reset Workaround
Help String	= Enabling this workardound will result in BIOS asserting FULL_CARD_POWER_OFF#, PERST# and RESET# WWAN signals before the WWAN Device Power-On Sequence is executed.  Disabling it has no impact.
Token	=51C	// Do NOT change this line
Offset	=88F
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Disable DSX ACPRESENT PullDown
Help String	= Disable PCH internal ACPRESENT PullDown when DeepSx or G3 exit.
Token	=AB8	// Do NOT change this line
Offset	=07
Width	=01
BIOS Default	=[00]Disabled 
Options	=*[01]Enabled	// Move "*" to the desired Option
         [00]Disabled

Setup Question	= Legacy IO Low Latency
Help String	= Set to enable low latency of legacy IO. Some systems require lower IO latency irrespective of power. This is a tradeoff between power and IO latency.
Token	=27E8	// Do NOT change this line
Offset	=771
Width	=01
BIOS Default	=[00]Disabled 
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Windows 10 Thunderbolt support
Help String	= Windows 10 Thunderbolt support
Token	=2857	// Do NOT change this line
Offset	=7E2
Width	=01
BIOS Default	=[02]Enable + RTD3 
Options	=[02]Enable + RTD3	// Move "*" to the desired Option
         *[00]Disabled

Setup Question	= FIVR Spread Spectrum
Help String	= Enable or Disable the FIVR Spread Spectrum
Token	=623	// Do NOT change this line
Offset	=2F7
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Power Down Mode
Help String	= CKE Power Down Mode Control
Token	=2773	// Do NOT change this line
Offset	=1A4
Width	=01
BIOS Default	=[FF]Auto 
Options	=[FF]Auto	// Move "*" to the desired Option
         *[00]No Power Down
         [01]APD
         [06]PPD-DLLoff

Setup Question	= SelfRefresh Enable
Help String	= Enable, Disable(Enable= Def)
Token	=786	// Do NOT change this line
Offset	=225
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Per Bank Refresh
Help String	= Enables and Disables the per bank refresh.  This only impacts memory technologies that support PBR: LPDDR4, LPDDR5 and DDR5
Token	=676	// Do NOT change this line
Offset	=199
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= LPMode
Help String	= Control LPMode feature
Token	=6AF	// Do NOT change this line
Offset	=451
Width	=01
BIOS Default	=[00]Auto 
Options	=[00]Auto	// Move "*" to the desired Option
         [01]Enabled
         *[02]Disabled

Setup Question	= SMM Use Delay Indication
Help String	= Enable/Disable usage of SMM_DELAYED MSR for MP sync in SMI
Token	=550	// Do NOT change this line
Offset	=22C
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= SMM Use Block Indication
Help String	= Enable/Disable usage of SMM_BLOCKED MSR for MP sync in SMI
Token	=551	// Do NOT change this line
Offset	=22D
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= SMM Use SMM en-US Indication
Help String	= Enable/Disable usage of SMM_ENABLE MSR for MP sync in SMI
Token	=552	// Do NOT change this line
Offset	=22E
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Energy Efficient P-state
Help String	= Enables/disables the Energy Efficient P-state feature.  [0]: Disables access to ENERGY_PERFORMANCE_BIAS MSR and CPUID Function 6 ECX[3] does not support the Energy Efficiency policy setting.  [1]: Enables access to ENERGY_PERFORMANCE_BIAS MSR 1B0h and CPUID Function 6 ECX[3] supports the Energy Efficient policy setting.
Token	=5C4	// Do NOT change this line
Offset	=3D
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Per Core P State OS control mode
Help String	= Enable/Disable Per Core P state OS control mode. Disabling will set Bit 31 = 1 command 0x06. When set, the highest core request is used for all other core requests.
Token	=556	// Do NOT change this line
Offset	=0F
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Enable Hibernation
Help String	= Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may not be effective with some operating systems.
Token	=1345	// Do NOT change this line
Offset	=BF2
Width	=01
BIOS Default	=1 
Value	=0	// Enabled = 1, Disabled = 0

Setup Question	= ACPI Sleep State
Help String	= Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed.
Token	=1346	// Do NOT change this line
Offset	=BF0
Width	=02
BIOS Default	=[02]S3 (Suspend to RAM) 
Options	=*[00]Suspend Disabled	// Move "*" to the desired Option
         [02]S3 (Suspend to RAM)

Setup Question	= ClkReq for Clock0
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F59	// Do NOT change this line
Offset	=EE
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock1
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F5B	// Do NOT change this line
Offset	=EF
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock2
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F5D	// Do NOT change this line
Offset	=F0
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock3
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F5F	// Do NOT change this line
Offset	=F1
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock4
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F61	// Do NOT change this line
Offset	=F2
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock5
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F63	// Do NOT change this line
Offset	=F3
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock6
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F65	// Do NOT change this line
Offset	=F4
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock7
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F67	// Do NOT change this line
Offset	=F5
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock8
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F69	// Do NOT change this line
Offset	=F6
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock9
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F6B	// Do NOT change this line
Offset	=F7
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock10
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F6D	// Do NOT change this line
Offset	=F8
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock11
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F6F	// Do NOT change this line
Offset	=F9
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock12
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F71	// Do NOT change this line
Offset	=FA
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock13
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F73	// Do NOT change this line
Offset	=FB
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock14
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F75	// Do NOT change this line
Offset	=FC
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock15
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F77	// Do NOT change this line
Offset	=FD
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock16
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F79	// Do NOT change this line
Offset	=FE
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= ClkReq for Clock17
Help String	= Platform-POR = CLKREQ signal is assigned to CLKSRC according to board layout. Disabled = CLKREQ will not be used.
Token	=F7B	// Do NOT change this line
Offset	=FF
Width	=01
BIOS Default	=[00]Platform-POR 
Options	=[00]Platform-POR	// Move "*" to the desired Option
         *[FF]Disabled

Setup Question	= Machine Check
Help String	= Enables/disables Machine Check
Token	=545	// Do NOT change this line
Offset	=BC
Width	=01
BIOS Default	=[01]Enabled 
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
Editor is loading...
Leave a Comment