Untitled
unknown
plain_text
a year ago
25 kB
11
Indexable
Environment size: 1621/131068 bytes
VAR_SOM_MX6(nand) U-Boot > setenv loadaddr 0x12000000
VAR_SOM_MX6(nand) U-Boot > setenv fdtaddr 0x18000000
VAR_SOM_MX6(nand) U-Boot > fatload mmc 0:1 ${loadaddr} uimage
reading uimage
9206008 bytes read in 439 ms (20 MiB/s)
VAR_SOM_MX6(nand) U-Boot > fatload mmc 0:1 ${fdtaddr} imx6dl-var-som-solo.dtb
reading imx6dl-var-som-solo.dtb
** Unable to read file imx6dl-var-som-solo.dtb **
VAR_SOM_MX6(nand) U-Boot > setenv fdtfile imx6dl-var-som-solo-cap.dtb
VAR_SOM_MX6(nand) U-Boot > fatload mmc 0:1 ${loadaddr} uimage
reading uimage
9206008 bytes read in 439 ms (20 MiB/s)
VAR_SOM_MX6(nand) U-Boot > fatload mmc 0:1 ${fdtaddr} ${fdtfile}
reading imx6dl-var-som-solo-cap.dtb
48913 bytes read in 20 ms (2.3 MiB/s)
VAR_SOM_MX6(nand) U-Boot > iminfo ${loadaddr}
## Checking Image at 12000000 ...
Legacy image found
Image Name: Linux-5.15.71-imx6+g042583ccf25a
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 9205944 Bytes = 8.8 MiB
Load Address: 10008000
Entry Point: 10008000
Verifying Checksum ... OK
VAR_SOM_MX6(nand) U-Boot > bootm ${loadaddr} - ${fdtaddr}
## Booting kernel from Legacy Image at 12000000 ...
Image Name: Linux-5.15.71-imx6+g042583ccf25a
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 9205944 Bytes = 8.8 MiB
Load Address: 10008000
Entry Point: 10008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 18000000
Booting using the fdt blob at 0x18000000
Loading Kernel Image ... OK
Using Device Tree in place at 18000000, end 1800ef10
Read SW1AB error!
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.15.71-imx6+g042583ccf25a (oe-user@oe-host) (arm-fsl-linux-gnueabi-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Thu Dec 14 11:15:05 UTC 3
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Variscite i.MX6 DualLite/Solo VAR-SOM-DUAL/VAR-SOM-SOLO
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x3c000000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000010000000-0x000000004fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff]
[ 0.000000] percpu: Embedded 12 pages/cpu s19020 r8192 d21940 u49152
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259840
[ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 689736K/1048576K available (12288K kernel code, 1319K rwdata, 4280K rodata, 1024K init, 449K bss, 31160K reserved, 327680K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C: DT/platform modifies aux control register: 0x32050000 -> 0x32450000
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001
[ 0.000000] Switching to timer-based delay loop, resolution 333ns
[ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[ 0.000031] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[ 0.001500] Console: colour dummy device 80x30
[ 0.001542] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
[ 0.001563] pid_max: default: 32768 minimum: 301
[ 0.001680] LSM: Security Framework initializing
[ 0.001818] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001841] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002771] CPU: Testing write buffer coherency: ok
[ 0.002833] CPU0: Spectre v2: using BPIALL workaround
[ 0.003115] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.004318] Setting up static identity map for 0x10100000 - 0x10100060
[ 0.004524] rcu: Hierarchical SRCU implementation.
[ 0.005084] smp: Bringing up secondary CPUs ...
[ 0.005939] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.005958] CPU1: Spectre v2: using BPIALL workaround
[ 0.006118] smp: Brought up 1 node, 2 CPUs
[ 0.006138] SMP: Total of 2 processors activated (12.00 BogoMIPS).
[ 0.006152] CPU: All CPU(s) started in SVC mode.
[ 0.006725] devtmpfs: initialized
[ 0.015859] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.016134] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.016166] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.036362] pinctrl core: initialized pinctrl subsystem
[ 0.037882] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.045889] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.046503] audit: initializing netlink subsys (disabled)
[ 0.046819] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.047396] thermal_sys: Registered thermal governor 'step_wise'
[ 0.047669] cpuidle: using governor menu
[ 0.047838] CPU identified as i.MX6DL, silicon rev 1.3
[ 0.065276] vdd1p1: supplied by regulator-dummy
[ 0.065866] vdd3p0: supplied by regulator-dummy
[ 0.066434] vdd2p5: supplied by regulator-dummy
[ 0.066978] vddarm: supplied by regulator-dummy
[ 0.067700] vddpu: supplied by regulator-dummy
[ 0.068094] vddsoc: supplied by regulator-dummy
[ 0.068914] mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator
[ 0.069571] mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator
[ 0.080547] platform 21dc000.mipi: Fixing up cyclic dependency with 20e0000.iomuxc-gpr:ipu1_csi1_mux
[ 0.080636] platform 21dc000.mipi: Fixing up cyclic dependency with 20e0000.iomuxc-gpr:ipu1_csi0_mux
[ 0.082250] platform 2400000.ipu: Fixing up cyclic dependency with ldb
[ 0.082331] platform 2400000.ipu: Fixing up cyclic dependency with 20e0000.iomuxc-gpr:ipu1_csi1_mux
[ 0.082406] platform 2400000.ipu: Fixing up cyclic dependency with 20e0000.iomuxc-gpr:ipu1_csi0_mux
[ 0.087336] No ATAGs?
[ 0.087462] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.087481] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.088673] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver
[ 0.091184] imx mu driver is registered.
[ 0.091684] imx rpmsg driver is registered.
[ 0.101570] Kprobes globally optimized
[ 0.122344] vgaarb: loaded
[ 0.123291] SCSI subsystem initialized
[ 0.123812] usbcore: registered new interface driver usbfs
[ 0.123872] usbcore: registered new interface driver hub
[ 0.123923] usbcore: registered new device driver usb
[ 0.124078] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator
[ 0.124267] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests
[ 0.124442] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator
[ 0.124584] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests
[ 0.126233] i2c i2c-0: IMX I2C adapter registered
[ 0.137734] i2c i2c-1: IMX I2C adapter registered
[ 0.139174] i2c i2c-2: IMX I2C adapter registered
[ 0.139739] mc: Linux media interface: v0.10
[ 0.139789] videodev: Linux video capture interface: v2.00
[ 0.139933] pps_core: LinuxPPS API ver. 1 registered
[ 0.139948] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.139971] PTP clock support registered
[ 0.176001] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.177750] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[ 0.178513] mxc_mipi_csi2 21dc000.mipi: i.MX MIPI CSI2 driver probed
[ 0.178533] mxc_mipi_csi2 21dc000.mipi: i.MX MIPI CSI2 dphy version is 0x3130302a
[ 0.178798] MIPI CSI2 driver module loaded
[ 0.178854] Advanced Linux Sound Architecture Driver Initialized.
[ 0.180037] Bluetooth: Core ver 2.22
[ 0.180103] NET: Registered PF_BLUETOOTH protocol family
[ 0.180116] Bluetooth: HCI device and connection manager initialized
[ 0.180135] Bluetooth: HCI socket layer initialized
[ 0.180150] Bluetooth: L2CAP socket layer initialized
[ 0.180177] Bluetooth: SCO socket layer initialized
[ 0.180919] clocksource: Switched to clocksource mxc_timer1
[ 0.181161] VFS: Disk quotas dquot_6.6.0
[ 0.181236] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.189736] NET: Registered PF_INET protocol family
[ 0.190003] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.191549] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.191598] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.191629] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.191713] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.191847] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.191973] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.192029] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.192263] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.192999] RPC: Registered named UNIX socket transport module.
[ 0.193020] RPC: Registered udp transport module.
[ 0.193029] RPC: Registered tcp transport module.
[ 0.193039] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.193058] PCI: CLS 0 bytes, default 64
[ 0.193395] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing.
[ 0.193675] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.196143] Bus freq driver module loaded
[ 0.197100] Initialise system trusted keyrings
[ 0.197386] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.203201] NFS: Registering the id_resolver key type
[ 0.203257] Key type id_resolver registered
[ 0.203270] Key type id_legacy registered
[ 0.203366] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.203381] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.203423] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.203870] fuse: init (API version 7.34)
[ 0.297653] Key type asymmetric registered
[ 0.297676] Asymmetric key parser 'x509' registered
[ 0.297931] io scheduler mq-deadline registered
[ 0.297951] io scheduler kyber registered
[ 0.302268] imx6q-pcie 1ffc000.pcie: supply epdev_on not found, using dummy regulator
[ 0.303483] pwm-backlight backlight: supply power not found, using dummy regulator
[ 0.309181] mxc_hdmi 20e0000.hdmi_video: supply HDMI not found, using dummy regulator
[ 0.311170] mxc_sdc_fb fb@0: registered mxc display driver ldb
[ 0.341060] imx6q-pcie 1ffc000.pcie: iATU unroll: disabled
[ 0.341078] imx6q-pcie 1ffc000.pcie: Detected iATU regions: 4 outbound, 4 inbound
[ 0.341104] imx6q-pcie 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges:
[ 0.341177] imx6q-pcie 1ffc000.pcie: IO 0x0001f80000..0x0001f8ffff -> 0x0000000000
[ 0.341215] imx6q-pcie 1ffc000.pcie: MEM 0x0001000000..0x0001efffff -> 0x0001000000
[ 0.341364] imx6q-pcie 1ffc000.pcie: iATU unroll: disabled
[ 0.341376] imx6q-pcie 1ffc000.pcie: Detected iATU regions: 4 outbound, 4 inbound
[ 0.394969] Console: switching to colour frame buffer device 100x30
[ 0.421998] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0x1a:0xa0:0xc1
[ 0.422041] fbcvt: 1920x1080@60: CVT Name - 2.073M9
[ 0.422178] mxc_sdc_fb fb@1: registered mxc display driver hdmi
[ 0.422196] mxc_sdc_fb fb@1: ipu0-di0 already in use
[ 0.422213] mxc_sdc_fb: probe of fb@1 failed with error -16
[ 0.424569] mxs-dma 110000.dma-apbh: initialized
[ 0.431402] pfuze100-regulator 1-0008: unrecognized pfuze chip ID!
[ 0.433172] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX
[ 1.341677] imx6q-pcie 1ffc000.pcie: Phy link never came up
[ 1.343241] printk: console [ttymxc0] enabled
[ 1.350302] imx6q-pcie: probe of 1ffc000.pcie failed with error -110
[ 1.352540] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 82, base_baud = 5000000) is a IMX
[ 1.523733] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 83, base_baud = 5000000) is a IMX
[ 1.534223] imx sema4 driver is registered.
[ 1.553362] brd: module loaded
[ 1.563653] loop: module loaded
[ 1.570446] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
[ 1.576855] nand: Micron MT29F1G08ABAEAWP
[ 1.580870] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.588580] gpmi-nand 112000.nand-controller: use legacy bch geometry
[ 1.595374] Scanning device for bad blocks
[ 1.718830] 4 fixed-partitions partitions found on MTD device gpmi-nand
[ 1.725490] Creating 4 MTD partitions on "gpmi-nand":
[ 1.730553] 0x000000000000-0x000000200000 : "spl"
[ 1.736806] 0x000000200000-0x000000400000 : "bootloader"
[ 1.743601] 0x000000400000-0x000001000000 : "kernel"
[ 1.750020] 0x000001000000-0x000040000000 : "rootfs"
[ 1.755047] mtd: partition "rootfs" extends beyond the end of device "gpmi-nand" -- size truncated to 0x7000000
[ 1.767092] gpmi-nand 112000.nand-controller: driver registered.
[ 1.777351] tun: Universal TUN/TAP device driver, 1.6
[ 1.782702] CAN device driver interface
[ 1.790833] pps pps0: new PPS source ptp0
[ 1.931564] fec 2188000.ethernet eth0: registered PHC device 0
[ 1.938522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.945118] ehci-pci: EHCI PCI platform driver
[ 1.949677] usbcore: registered new interface driver usb-storage
[ 1.958990] SPI driver ads7846 has no spi_device_id for ti,tsc2046
[ 1.965219] SPI driver ads7846 has no spi_device_id for ti,ads7843
[ 1.971420] SPI driver ads7846 has no spi_device_id for ti,ads7845
[ 1.977606] SPI driver ads7846 has no spi_device_id for ti,ads7873
[ 1.984457] edt_ft5x06 2-0038: supply vcc not found, using dummy regulator
[ 1.991595] edt_ft5x06 2-0038: supply iovcc not found, using dummy regulator
[ 1.992735] i2c_dev: i2c /dev entries driver
[ 1.999247] edt_ft5x06 2-0038: touchscreen probe failed
[ 2.005056] mxc_v4l2_output v4l2_out: V4L2 device registered as video16
[ 2.014987] mxc_v4l2_output v4l2_out: V4L2 device registered as video17
[ 2.025344] Bluetooth: HCI UART driver ver 2.3
[ 2.029807] Bluetooth: HCI UART protocol H4 registered
[ 2.034987] Bluetooth: HCI UART protocol BCSP registered
[ 2.040340] Bluetooth: HCI UART protocol LL registered
[ 2.045525] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 2.051837] Bluetooth: HCI UART protocol Marvell registered
[ 2.057473] usbcore: registered new interface driver btusb
[ 2.064189] sdhci: Secure Digital Host Controller Interface driver
[ 2.070380] sdhci: Copyright(c) Pierre Ossman
[ 2.074778] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.082974] usbcore: registered new interface driver usbhid
[ 2.083294] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO
[ 2.088567] usbhid: USB HID core driver
[ 2.093676] mxc_hdmi_cec soc:hdmi_cec@120000: HDMI CEC initialized
[ 2.098059] sdhci-esdhc-imx 2194000.mmc: Got WP GPIO
[ 2.108914] mxc_vpu 2040000.vpu_fsl: VPU initialized
[ 2.121378] fsl-ssi-dai 202c000.ssi: No cache defaults, reading back from HW
[ 2.130281] fsl-hdmi-dai soc:hdmi_audio@120000: failed to probe. Load HDMI-video first.
[ 2.133635] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
[ 2.138378] fsl-hdmi-dai: probe of soc:hdmi_audio@120000 failed with error -12
[ 2.154919] imx6qdl-audio-hdmi sound-hdmi: initialize HDMI-audio failed. load HDMI-video first!
[ 2.163935] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA
[ 2.164009] NET: Registered PF_LLC protocol family
[ 2.176345] NET: Registered PF_INET6 protocol family
[ 2.182703] Segment Routing with IPv6
[ 2.186442] In-situ OAM (IOAM) with IPv6
[ 2.190472] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.197089] NET: Registered PF_PACKET protocol family
[ 2.202209] can: controller area network core
[ 2.206653] NET: Registered PF_CAN protocol family
[ 2.207483] mmc1: new high speed SDHC card at address 5048
[ 2.211511] can: raw protocol
[ 2.220095] can: broadcast manager protocol
[ 2.220480] mmcblk1: mmc1:5048 SD04G 3.71 GiB
[ 2.224383] can: netlink gateway - max_hops=1
[ 2.233618] Bluetooth: RFCOMM TTY layer initialized
[ 2.235010] mmcblk1: p1 p2
[ 2.238532] Bluetooth: RFCOMM socket layer initialized
[ 2.246595] Bluetooth: RFCOMM ver 1.11
[ 2.250369] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.254061] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA
[ 2.255745] Bluetooth: BNEP filters: protocol multicast
[ 2.267969] Bluetooth: BNEP socket layer initialized
[ 2.273078] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.279023] Bluetooth: HIDP socket layer initialized
[ 2.284233] lib80211: common routines for IEEE802.11 drivers
[ 2.289980] Key type dns_resolver registered
[ 2.296376] Registering SWP/SWPB emulation handler
[ 2.301602] Loading compiled-in X.509 certificates
[ 2.322295] imx_epdc_fb 20f4000.epdc: can't get/select pinctrl
[ 2.352882] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.357800] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 2.390954] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.396877] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 2.405393] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.413077] usb usb1: Product: EHCI Host Controller
[ 2.418073] usb usb1: Manufacturer: Linux 5.15.71-imx6+g042583ccf25a ehci_hcd
[ 2.425259] usb usb1: SerialNumber: ci_hdrc.0
[ 2.430248] hub 1-0:1.0: USB hub found
[ 2.434157] hub 1-0:1.0: 1 port detected
[ 2.439711] imx_usb 2184200.usb: No over current polarity defined
[ 2.449428] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 2.454460] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 2.500987] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 2.506773] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 2.515119] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.522580] usb usb2: Product: EHCI Host Controller
[ 2.527550] usb usb2: Manufacturer: Linux 5.15.71-imx6+g042583ccf25a ehci_hcd
[ 2.534708] usb usb2: SerialNumber: ci_hdrc.1
[ 2.539592] hub 2-0:1.0: USB hub found
[ 2.543494] hub 2-0:1.0: 1 port detected
[ 2.550316] imx_thermal 20c8000.anatop:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C
[ 2.562620] fsl-ssi-dai 202c000.ssi: No cache defaults, reading back from HW
[ 2.569822] fsl-ssi-dai 202c000.ssi: Unbalanced pm_runtime_enable!
[ 2.578758] fsl-ssi-dai 202c000.ssi: No cache defaults, reading back from HW
[ 2.586039] fsl-ssi-dai 202c000.ssi: Unbalanced pm_runtime_enable!
[ 2.594406] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 2.602310] ALSA device list:
[ 2.603467] fsl-ssi-dai 202c000.ssi: No cache defaults, reading back from HW
[ 2.605295] No soundcards found.
[ 2.616082] fsl-ssi-dai 202c000.ssi: Unbalanced pm_runtime_enable!
[ 2.625231] VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0): error -6
[ 2.633043] Please append a correct "root=" boot option; here are the available partitions:
[ 2.641537] 0100 65536 ram0
[ 2.641552] (driver?)
[ 2.647666] 0101 65536 ram1
[ 2.647674] (driver?)
[ 2.653866] 0102 65536 ram2
[ 2.653875] (driver?)
[ 2.659986] 0103 65536 ram3
[ 2.659992] (driver?)
[ 2.666167] 0104 65536 ram4
[ 2.666175] (driver?)
[ 2.672333] 0105 65536 ram5
[ 2.672341] (driver?)
[ 2.678452] 0106 65536 ram6
[ 2.678459] (driver?)
[ 2.684609] 0107 65536 ram7
[ 2.684619] (driver?)
[ 2.690728] 0108 65536 ram8
[ 2.690734] (driver?)
[ 2.696890] 0109 65536 ram9
[ 2.696898] (driver?)
[ 2.703050] 010a 65536 ram10
[ 2.703058] (driver?)
[ 2.709252] 010b 65536 ram11
[ 2.709260] (driver?)
[ 2.715471] 010c 65536 ram12
[ 2.715477] (driver?)
[ 2.721704] 010d 65536 ram13
[ 2.721712] (driver?)
[ 2.727908] 010e 65536 ram14
[ 2.727915] (driver?)
[ 2.734133] 010f 65536 ram15
[ 2.734140] (driver?)
[ 2.740346] 1f00 2048 mtdblock0
[ 2.740353] (driver?)
[ 2.746912] 1f01 2048 mtdblock1
[ 2.746919] (driver?)
[ 2.753477] 1f02 12288 mtdblock2
[ 2.753484] (driver?)
[ 2.760026] 1f03 114688 mtdblock3
[ 2.760033] (driver?)
[ 2.766602] b300 3887104 mmcblk1
[ 2.766609] driver: mmcblk
[ 2.773425] b301 26093 mmcblk1p1 25641b6e-01
[ 2.773433]
[ 2.780233] b302 281270 mmcblk1p2 25641b6e-02
[ 2.780240]
[ 2.787087] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 2.795364] CPU0: stopping
[ 2.798082] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.71-imx6+g042583ccf25a #1
[ 2.805747] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 2.812285] [<8010f1ac>] (unwind_backtrace) from [<8010a214>] (show_stack+0x10/0x14)
[ 2.820051] [<8010a214>] (show_stack) from [<80c6ac2c>] (dump_stack_lvl+0x40/0x4c)
[ 2.827641] [<80c6ac2c>] (dump_stack_lvl) from [<8010cec0>] (do_handle_IPI+0xf4/0x11c)
[ 2.835571] [<8010cec0>] (do_handle_IPI) from [<8010cf00>] (ipi_handler+0x18/0x20)
[ 2.843150] [<8010cf00>] (ipi_handler) from [<8018a20c>] (handle_percpu_devid_irq+0x78/0x13c)
[ 2.851692] [<8018a20c>] (handle_percpu_devid_irq) from [<80184158>] (handle_domain_irq+0x5c/0x78)
[ 2.860669] [<80184158>] (handle_domain_irq) from [<805d9630>] (gic_handle_irq+0x7c/0x90)
[ 2.868863] [<805d9630>] (gic_handle_irq) from [<80100b8c>] (__irq_svc+0x6c/0xa8)
[ 2.876356] Exception stack(0x81301ec8 to 0x81301f10)
[ 2.881413] 1ec0: 00000000 f4a00608 00000001 81300000 00000001 a6089293
[ 2.889596] 1ee0: 8130aa28 ab61e138 00000001 00000000 00000001 00000000 00a9d324 81301f18
[ 2.897775] 1f00: 801b4c48 809494e0 20000113 ffffffff
[ 2.902831] [<80100b8c>] (__irq_svc) from [<809494e0>] (cpuidle_enter_state+0x170/0x354)
[ 2.910938] [<809494e0>] (cpuidle_enter_state) from [<80949708>] (cpuidle_enter+0x30/0x40)
[ 2.919211] [<80949708>] (cpuidle_enter) from [<8016288c>] (do_idle+0x20c/0x2ec)
[ 2.926626] [<8016288c>] (do_idle) from [<80162ce0>] (cpu_startup_entry+0x18/0x20)
[ 2.934211] [<80162ce0>] (cpu_startup_entry) from [<81201108>] (start_kernel+0x60c/0x64c)
[ 2.942412] [<81201108>] (start_kernel) from [<00000000>] (0x0)
[ 2.948350] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
Editor is loading...
Leave a Comment