klippy.log
unknown
verilog
a year ago
61 kB
24
No Index
Starting Klippy...
Args: ['/home/klipper/klipper/klippy/klippy.py', '/home/klipper/printer_data/config/printer.cfg', '-l', '/home/klipper/printer_data/logs/klippy.log', '-I', '/home/klipper/printer_data/comms/klippy.serial', '-a', '/home/klipper/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-166-g957475421'
Branch: (HEAD detached at eddy/eddy)
Remote: eddy
Tracked URL: https://github.com/bigtreetech/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Sat Jun 15 13:48:46 2024 (1718470126.9 19.7)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT
[pause_resume]
[display_status]
[respond]
[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode =
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
{% set retract = client.cancel_retract|default(5.0)|abs %}
{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
else "X=" ~ client.park_at_cancel_x %}
{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
else "Y=" ~ client.park_at_cancel_y %}
{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
{% endif %}
{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
_CLIENT_RETRACT LENGTH={retract}
TURN_OFF_HEATERS
M106 S0
{client.user_cancel_macro|default("")}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
SET_PAUSE_NEXT_LAYER ENABLE=0
SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
CANCEL_PRINT_BASE
[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode =
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set idle_timeout = client.idle_timeout|default(0) %}
{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
{% set restore = False if printer.toolhead.extruder == ''
else True if params.RESTORE|default(1)|int == 1 else False %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
{% if idle_timeout > 0 %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
{% endif %}
PAUSE_BASE
{client.user_pause_macro|default("")}
_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}
[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode =
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
{% set sp_move = client.speed_move|default(velocity) %}
{% set runout_resume = True if client.runout_sensor|default("") == ""
else True if not printer[client.runout_sensor].enabled
else printer[client.runout_sensor].filament_detected %}
{% set can_extrude = True if printer.toolhead.extruder == ''
else printer[printer.toolhead.extruder].can_extrude %}
{% set do_resume = False %}
{% set prompt_txt = [] %}
{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
{% if last_extruder_temp.restore %}
RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
M109 S{last_extruder_temp.temp}
{% set do_resume = True %}
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
{% if runout_resume %}
{% if do_resume %}
{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
{client.user_resume_macro|default("")}
_CLIENT_EXTRUDE
RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
{% endif %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
{% endif %}
{% if not (runout_resume and do_resume) %}
RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
{% for element in prompt_txt %}
RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
{% endfor %}
RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
RESPOND TYPE=command MSG="action:prompt_show"
{% endif %}
[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode =
{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"
[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode =
{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
else params.LAYER is defined %}
{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"
[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode =
{% if pause_next_layer.enable %}
RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
{pause_next_layer.call}
SET_PAUSE_NEXT_LAYER ENABLE=0
{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
{pause_at_layer.call}
SET_PAUSE_AT_LAYER ENABLE=0
{% endif %}
SET_PRINT_STATS_INFO_BASE {rawparams}
[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode =
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
{% set use_custom = client.use_custom_pos|default(false)|lower == 'true' %}
{% set custom_park_x = client.custom_park_x|default(0.0) %}
{% set custom_park_y = client.custom_park_y|default(0.0) %}
{% set park_dz = client.custom_park_dz|default(2.0)|abs %}
{% set sp_hop = client.speed_hop|default(15) * 60 %}
{% set sp_move = client.speed_move|default(velocity) * 60 %}
{% set origin = printer.gcode_move.homing_origin %}
{% set act = printer.gcode_move.gcode_position %}
{% set max = printer.toolhead.axis_maximum %}
{% set cone = printer.toolhead.cone_start_z|default(max.z) %}
{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
else False %}
{% set z_min = params.Z_MIN|default(0)|float %}
{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
{% set x_park = params.X if params.X is defined
else custom_park_x if use_custom
else 0.0 if round_bed
else (max.x - 5.0) %}
{% set y_park = params.Y if params.Y is defined
else custom_park_y if use_custom
else (max.y - 5.0) if round_bed and z_park < cone
else 0.0 if round_bed
else (max.y - 5.0) %}
_CLIENT_RETRACT
{% if "xyz" in printer.toolhead.homed_axes %}
G90
G1 Z{z_park} F{sp_hop}
G1 X{x_park} Y{y_park} F{sp_move}
{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
{% else %}
RESPOND TYPE=echo MSG='Printer not homed'
{% endif %}
[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode =
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
{% if printer.toolhead.extruder != '' %}
{% if printer[printer.toolhead.extruder].can_extrude %}
{% if use_fw_retract %}
{% if length < 0 %}
G10
{% else %}
G11
{% endif %}
{% else %}
M83
G1 E{length} F{(speed|float|abs) * 60}
{% if absolute_extrude %}
M82
{% endif %}
{% endif %}
{% else %}
RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
{% endif %}
{% endif %}
[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode =
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
[stepper_x]
step_pin = PF13
dir_pin = !PF12
enable_pin = !PF14
microsteps = 8
rotation_distance = 40
endstop_pin = PG6
position_endstop = 0
position_max = 215
homing_speed = 50
[stepper_y]
step_pin = PG0
dir_pin = !PG1
enable_pin = !PF15
microsteps = 8
rotation_distance = 40
endstop_pin = PG9
position_endstop = 0
position_max = 205
homing_speed = 50
[stepper_z]
step_pin = PF11
dir_pin = !PG3
enable_pin = !PG5
microsteps = 80
rotation_distance = 8
endstop_pin = probe:z_virtual_endstop
position_min = -2
position_max = 150
[extruder]
step_pin = PE6
dir_pin = PA14
enable_pin = !PE0
rotation_distance = 14.28
microsteps = 36
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PA2
sensor_pin = PF4
sensor_type = EPCOS 100K B57560G104F
min_temp = 0
max_temp = 300
pressure_advance = 0.055
control = pid
pid_kp = 12.874
pid_ki = 0.335
pid_kd = 123.589
[heater_bed]
heater_pin = PA1
sensor_pin = PF3
sensor_type = ATC Semitec 104GT-2
min_temp = 0
max_temp = 130
control = pid
pid_kp = 68.986
pid_ki = 1.451
pid_kd = 820.075
[fan]
pin = PA8
[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f429xx_310041000750314B33323220-if00
[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 2
max_z_accel = 1000
[safe_z_home]
home_xy_position = 100, 110
speed = 50
z_hop = 10
z_hop_speed = 5
[force_move]
enable_force_move = True
[board_pins]
aliases =
EXP1_1=PE8, EXP1_2=PE7,
EXP1_3=PE9, EXP1_4=PE10,
EXP1_5=PE12, EXP1_6=PE13,
EXP1_7=PE14, EXP1_8=PE15,
EXP1_9=<GND>, EXP1_10=<5V>,
EXP2_1=PA6, EXP2_2=PA5,
EXP2_3=PB1, EXP2_4=PA4,
EXP2_5=PB2, EXP2_6=PA7,
EXP2_7=PC15, EXP2_8=<RST>,
EXP2_9=<GND>, EXP2_10=PC5
[mcu eddy]
serial = /dev/serial/by-id/usb-Klipper_rp2040_4550357128894FD8-if00
[probe_eddy_current btt_eddy]
sensor_type = ldc1612
i2c_mcu = eddy
i2c_bus = i2c0f
x_offset = 0
y_offset = -30
data_rate = 500
reg_drive_current = 15
calibrate =
0.050000:3220682.742,0.100000:3220028.282,0.150000:3219059.766,
0.200000:3218437.685,0.250000:3217470.490,0.300000:3216586.269,
0.350000:3215648.047,0.400000:3215044.837,0.450000:3214065.592,
0.500000:3213582.119,0.550000:3212737.944,0.600000:3212159.732,
0.650000:3211298.347,0.700000:3210454.844,0.750000:3209668.687,
0.800000:3209153.545,0.850000:3208406.930,0.900000:3207907.465,
0.950000:3207255.218,1.000000:3206787.066,1.050000:3206150.209,
1.100000:3205543.390,1.150000:3204956.705,1.200000:3204479.800,
1.250000:3203864.357,1.300000:3203458.079,1.350000:3202895.760,
1.400000:3202501.080,1.450000:3201881.029,1.500000:3201478.595,
1.550000:3200931.625,1.600000:3200350.066,1.650000:3199741.073,
1.700000:3199376.386,1.750000:3198876.455,1.800000:3198491.661,
1.850000:3198012.985,1.900000:3197554.579,1.950000:3197105.557,
2.000000:3196680.113,2.050000:3196239.147,2.100000:3195851.023,
2.150000:3195427.809,2.200000:3195169.907,2.250000:3194741.835,
2.300000:3194297.723,2.350000:3193888.519,2.400000:3193521.893,
2.450000:3193169.300,2.500000:3192845.395,2.550000:3192468.076,
2.600000:3192220.557,2.650000:3191863.895,2.700000:3191491.318,
2.750000:3191195.037,2.800000:3190877.735,2.850000:3190590.157,
2.900000:3190383.265,2.950000:3190091.602,3.000000:3189857.651,
3.050000:3189553.435,3.100000:3189272.934,3.150000:3188953.634,
3.200000:3188642.928,3.250000:3188355.815,3.300000:3188141.094,
3.350000:3187853.974,3.400000:3187677.409,3.450000:3187427.600,
3.500000:3187140.396,3.550000:3186859.714,3.600000:3186640.913,
3.650000:3186419.347,3.700000:3186273.780,3.750000:3186013.273,
3.800000:3185898.237,3.850000:3185664.957,3.900000:3185492.686,
3.950000:3185297.528,4.000000:3185105.751,4.050000:3184853.705
calibration_temp = 35.000053
z_offset = 1.970
[temperature_sensor btt_eddy_mcu]
sensor_type = temperature_mcu
sensor_mcu = eddy
min_temp = 10
max_temp = 100
[temperature_probe btt_eddy]
sensor_type = Generic 3950
sensor_pin = eddy:gpio26
horizontal_move_z = 2.5
[bed_mesh]
horizontal_move_z = 2
speed = 50
mesh_min = 10, 10
mesh_max = 180, 175
probe_count = 5, 5
[bed_mesh default]
version = 1
points =
-1.014796, -0.958822, -0.936294, -1.041141, -1.165152
-0.822169, -0.752036, -0.722833, -0.682641, -0.928071
-0.824111, -0.716143, -0.617918, -0.631342, -0.832380
-0.825916, -0.725135, -0.600951, -0.538368, -0.756806
-0.780433, -0.701438, -0.603297, -0.524454, -0.575845
x_count = 5
y_count = 5
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 180.0
min_y = 10.0
max_y = 175.0
=======================
probe_eddy_current btt_eddy: No drift calibration configured, disabling temperature compensation
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 124 commands (v0.12.0-166-g957475421 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 CLOCK_FREQ=168000000 MCU=stm32f429xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'eddy': Starting serial connect
mcu 'eddy': got {'count': 401, 'sum': 35515, 'sumsq': 26919, '#name': 'stats', '#sent_time': 21.432539839, '#receive_time': 21.469910153}
Loaded MCU 'eddy' 112 commands (v0.12.0-166-g957475421 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'eddy' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'eddy' nominal base=437.226612 slope=-1917.489831
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'eddy' printer configuration...
Configured MCU 'eddy' (1024 moves)
Starting heater checks for heater_bed
bed_mesh: generated points
Index | Tool Adjusted | Probe
0 | (10.0, 40.0) | (10.0, 10.0)
1 | (52.5, 40.0) | (52.5, 10.0)
2 | (95.0, 40.0) | (95.0, 10.0)
3 | (137.5, 40.0) | (137.5, 10.0)
4 | (180.0, 40.0) | (180.0, 10.0)
5 | (180.0, 81.2) | (180.0, 51.2)
6 | (137.5, 81.2) | (137.5, 51.2)
7 | (95.0, 81.2) | (95.0, 51.2)
8 | (52.5, 81.2) | (52.5, 51.2)
9 | (10.0, 81.2) | (10.0, 51.2)
10 | (10.0, 122.5) | (10.0, 92.5)
11 | (52.5, 122.5) | (52.5, 92.5)
12 | (95.0, 122.5) | (95.0, 92.5)
13 | (137.5, 122.5) | (137.5, 92.5)
14 | (180.0, 122.5) | (180.0, 92.5)
15 | (180.0, 163.8) | (180.0, 133.8)
16 | (137.5, 163.8) | (137.5, 133.8)
17 | (95.0, 163.8) | (95.0, 133.8)
18 | (52.5, 163.8) | (52.5, 133.8)
19 | (10.0, 163.8) | (10.0, 133.8)
20 | (10.0, 205.0) | (10.0, 175.0)
21 | (52.5, 205.0) | (52.5, 175.0)
22 | (95.0, 205.0) | (95.0, 175.0)
23 | (137.5, 205.0) | (137.5, 175.0)
24 | (180.0, 205.0) | (180.0, 175.0)
Starting heater checks for extruder
Stats 21.7: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1161 bytes_read=4649 bytes_retransmit=9 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167975682 eddy: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=878 bytes_read=4296 bytes_retransmit=9 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000791 adj=12002848 heater_bed: target=0 temp=0.0 pwm=0.000 temperature_probe btt_eddy: temp=0.0 btt_eddy_mcu: temp=0.0 sysload=0.46 cputime=1.083 memavail=532908 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 22.7: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1167 bytes_read=4665 bytes_retransmit=9 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167986732 eddy: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=884 bytes_read=4312 bytes_retransmit=9 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000640 adj=12002518 heater_bed: target=0 temp=0.0 pwm=0.000 temperature_probe btt_eddy: temp=0.0 btt_eddy_mcu: temp=0.0 sysload=0.46 cputime=1.086 memavail=532164 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 23.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=1173 bytes_read=4786 bytes_retransmit=9 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167994552 eddy: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=890 bytes_read=4415 bytes_retransmit=9 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000429 adj=12001128 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.4 btt_eddy_mcu: temp=32.1 sysload=0.46 cputime=1.091 memavail=529944 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 24.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=1179 bytes_read=4892 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167994209 eddy: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=896 bytes_read=4547 bytes_retransmit=9 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000385 adj=11999931 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.4 btt_eddy_mcu: temp=32.2 sysload=0.46 cputime=1.095 memavail=528844 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
webhooks client 4135161088: New connection
webhooks client 4135161088: Client info {'program': 'Moonraker', 'version': 'v0.8.0-268-ga23187b'}
Stats 25.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=1185 bytes_read=5013 bytes_retransmit=9 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167994547 eddy: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=902 bytes_read=4650 bytes_retransmit=9 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000372 adj=12000122 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.4 btt_eddy_mcu: temp=32.3 sysload=0.66 cputime=1.104 memavail=528464 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 4135161088
webhooks: registering remote method 'reboot_machine' for connection id: 4135161088
webhooks: registering remote method 'pause_job_queue' for connection id: 4135161088
webhooks: registering remote method 'start_job_queue' for connection id: 4135161088
Stats 26.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=1191 bytes_read=5134 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167994604 eddy: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=908 bytes_read=4767 bytes_retransmit=9 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000363 adj=12000210 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.4 btt_eddy_mcu: temp=32.2 sysload=0.66 cputime=1.119 memavail=524736 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 27.7: gcodein=0 mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=1197 bytes_read=5240 bytes_retransmit=9 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167994818 eddy: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=914 bytes_read=4899 bytes_retransmit=9 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000362 adj=12000318 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.4 btt_eddy_mcu: temp=32.3 sysload=0.66 cputime=1.136 memavail=525272 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 28.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=1203 bytes_read=5375 bytes_retransmit=9 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167994813 eddy: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=920 bytes_read=5002 bytes_retransmit=9 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000375 adj=12000382 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.4 btt_eddy_mcu: temp=32.3 sysload=0.66 cputime=1.144 memavail=521044 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 29.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=1209 bytes_read=5496 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167994855 eddy: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=926 bytes_read=5105 bytes_retransmit=9 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000363 adj=12000496 heater_bed: target=0 temp=22.6 pwm=0.000 temperature_probe btt_eddy: temp=29.4 btt_eddy_mcu: temp=32.2 sysload=0.66 cputime=1.151 memavail=521044 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 30.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=1215 bytes_read=5602 bytes_retransmit=9 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167994901 eddy: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=932 bytes_read=5237 bytes_retransmit=9 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000369 adj=12000513 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.5 btt_eddy_mcu: temp=32.1 sysload=0.61 cputime=1.159 memavail=524744 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 31.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=1221 bytes_read=5723 bytes_retransmit=9 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995088 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=938 bytes_read=5352 bytes_retransmit=9 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000362 adj=12000559 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.5 btt_eddy_mcu: temp=32.4 sysload=0.61 cputime=1.172 memavail=521096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 32.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=1227 bytes_read=5844 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995166 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=944 bytes_read=5455 bytes_retransmit=9 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000357 adj=12000532 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.5 btt_eddy_mcu: temp=32.2 sysload=0.61 cputime=1.180 memavail=518072 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 33.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=1402 bytes_read=5979 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=167995239 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=950 bytes_read=5587 bytes_retransmit=9 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000357 adj=12000538 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.5 btt_eddy_mcu: temp=32.4 sysload=0.61 cputime=1.197 memavail=517320 print_time=45.440 buffer_time=4.582 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 34.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=1424 bytes_read=6115 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995326 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=956 bytes_read=5690 bytes_retransmit=9 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000356 adj=12000711 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.5 btt_eddy_mcu: temp=32.1 sysload=0.61 cputime=1.206 memavail=521152 print_time=45.440 buffer_time=3.582 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 35.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=1430 bytes_read=6221 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995369 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=962 bytes_read=5793 bytes_retransmit=9 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000363 adj=12000694 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.5 btt_eddy_mcu: temp=32.2 sysload=0.56 cputime=1.215 memavail=515684 print_time=45.440 buffer_time=2.581 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 36.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=1436 bytes_read=6327 bytes_retransmit=9 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995381 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=968 bytes_read=5937 bytes_retransmit=9 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000365 adj=12000703 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.4 sysload=0.56 cputime=1.227 memavail=517384 print_time=45.460 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 37.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=1442 bytes_read=6463 bytes_retransmit=9 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995501 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=974 bytes_read=6040 bytes_retransmit=9 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000367 adj=12000706 heater_bed: target=0 temp=22.5 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.4 sysload=0.56 cputime=1.244 memavail=520168 print_time=45.460 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 38.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=1711 bytes_read=6747 bytes_retransmit=9 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995583 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=980 bytes_read=6143 bytes_retransmit=9 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000362 adj=12000690 heater_bed: target=0 temp=22.6 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.5 sysload=0.56 cputime=1.261 memavail=520524 print_time=46.060 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.1 pwm=0.000
Stats 39.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2098 bytes_read=7165 bytes_retransmit=9 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995646 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=986 bytes_read=6275 bytes_retransmit=9 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000361 adj=12000670 heater_bed: target=0 temp=22.6 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.6 sysload=0.56 cputime=1.287 memavail=520376 print_time=47.060 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 40.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2497 bytes_read=7632 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=167995609 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=992 bytes_read=6378 bytes_retransmit=9 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000358 adj=12000658 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.3 sysload=0.51 cputime=1.304 memavail=525324 print_time=48.060 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.2 pwm=0.000
Stats 41.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2851 bytes_read=7929 bytes_retransmit=103 bytes_invalid=0 send_seq=257 receive_seq=251 retransmit_seq=255 srtt=0.000 rttvar=0.000 rto=0.200 ready_bytes=0 upcoming_bytes=0 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000355 adj=12000656 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.51 cputime=1.319 memavail=524840 print_time=49.060 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
b'Got EOF when reading from device'
Stats 42.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=364 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=0.800 ready_bytes=0 upcoming_bytes=121 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1 freq=12000355 adj=12000641 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.51 cputime=1.330 memavail=524840 print_time=50.060 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
b'Got EOF when reading from device'
Stats 43.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=282 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=2 freq=12000355 adj=12000641 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.51 cputime=1.346 memavail=524680 print_time=51.060 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 44.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=464 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=3 freq=12000355 adj=12000642 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.51 cputime=1.364 memavail=524680 print_time=51.991 buffer_time=0.126 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Timeout with MCU 'mcu' (eventtime=45.671879)
Transition to shutdown state: Lost communication with MCU 'mcu'
Dumping gcode input 0 blocks
Dumping 20 requests for client 4135161088
Received 25.668670: b'{"id": 3896222696, "method": "objects/subscribe", "params": {"objects": {"webhooks": null}, "response_template": {"method": "process_status_update"}}}'
Received 25.669936: b'{"id": 3896222696, "method": "gcode/subscribe_output", "params": {"response_template": {"method": "process_gcode_response"}}}'
Received 25.671067: b'{"id": 3896222696, "method": "list_endpoints", "params": {}}'
Received 25.672494: b'{"id": 3896222216, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 25.921737: b'{"id": 3905146160, "method": "objects/list", "params": {}}'
Received 25.922996: b'{"id": 3905146160, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 26.173990: b'{"id": 3904700296, "method": "register_remote_method", "params": {"response_template": {"method": "shutdown_machine"}, "remote_method": "shutdown_machine"}}'
Received 26.175218: b'{"id": 3904700296, "method": "register_remote_method", "params": {"response_template": {"method": "reboot_machine"}, "remote_method": "reboot_machine"}}'
Received 26.176307: b'{"id": 3905962792, "method": "register_remote_method", "params": {"response_template": {"method": "pause_job_queue"}, "remote_method": "pause_job_queue"}}'
Received 26.177263: b'{"id": 3905962792, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 26.178700: b'{"id": 3896222048, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 26.178957: b'{"id": 3896222240, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 26.422877: b'{"id": 3896222048, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "temperature_probe btt_eddy": null, "temperature_sensor btt_eddy_mcu": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 26.673990: b'{"id": 3896202144, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "temperature_probe btt_eddy": null, "temperature_sensor btt_eddy_mcu": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 27.087263: b'{"id": 3896204640, "method": "info", "params": {}}'
Received 27.097463: b'{"id": 3896204568, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 27.191759: b'{"id": 3896205264, "method": "gcode/help", "params": {}}'
Received 27.217002: b'{"id": 3896204928, "method": "objects/query", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "extruder": null, "fan": null, "gcode_move": null, "heater_bed": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "motion_report": null, "firmware_retraction": null, "exclude_object": null, "manual_probe": null, "temperature_sensor btt_eddy_mcu": null}}}'
Received 27.437653: b'{"id": 3896204256, "method": "objects/subscribe", "params": {"objects": {"bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed"], "gcode_move": ["extrude_factor", "gcode_position", "homing_origin", "speed_factor", "speed"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "print_stats": null, "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "minimum_cruise_ratio", "max_velocity", "square_corner_velocity"], "virtual_sdcard": ["file_position", "is_active", "progress"], "webhooks": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "manual_probe": ["is_active"], "screws_tilt_adjust": ["results", "error"], "extruder": null, "heater_bed": null, "temperature_sensor btt_eddy_mcu": null, "temperature_probe btt_eddy": null}, "response_template": {"method": "process_status_update"}}}'
Received 32.951453: b'{"id": 3885964448, "method": "gcode/script", "params": {"script": "G28"}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[322.5, 0.0, 10.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (32.958496943, 0.0, 0.0)
Stats 45.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=465 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=4 freq=12000355 adj=12000642 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.55 cputime=1.373 memavail=513972 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Timeout with MCU 'eddy' (eventtime=46.672229)
Stats 46.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=479 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=6 freq=12000355 adj=12000642 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.55 cputime=1.381 memavail=509224 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 47.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=480 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=7 freq=12000355 adj=12000648 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.55 cputime=1.385 memavail=509224 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 48.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=481 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=12000355 adj=12000653 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.55 cputime=1.389 memavail=509224 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 49.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=482 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=9 freq=12000355 adj=12000657 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.55 cputime=1.393 memavail=509224 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 50.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=483 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=10 freq=12000355 adj=12000660 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.51 cputime=1.401 memavail=509228 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 51.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=484 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=12000355 adj=12000662 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.51 cputime=1.408 memavail=509472 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 52.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=485 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=12 freq=12000355 adj=12000664 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.51 cputime=1.412 memavail=506800 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 53.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=486 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=13 freq=12000355 adj=12000665 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.51 cputime=1.416 memavail=506860 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 54.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=487 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=14 freq=12000355 adj=12000665 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.51 cputime=1.420 memavail=506860 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 55.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=488 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=15 freq=12000355 adj=12000666 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.47 cputime=1.424 memavail=506860 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 56.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=489 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=16 freq=12000355 adj=12000667 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.47 cputime=1.430 memavail=523232 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 57.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=490 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=17 freq=12000355 adj=12000667 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.47 cputime=1.438 memavail=522608 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 58.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=491 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=18 freq=12000355 adj=12000667 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.47 cputime=1.443 memavail=521252 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 59.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=492 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=19 freq=12000355 adj=12000667 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.47 cputime=1.447 memavail=521252 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 60.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=493 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=20 freq=12000355 adj=12000668 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.43 cputime=1.452 memavail=521252 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 61.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=494 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=21 freq=12000355 adj=12000668 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.43 cputime=1.456 memavail=521256 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 62.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=495 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=22 freq=12000355 adj=12000668 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.43 cputime=1.461 memavail=521048 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 63.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=496 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=23 freq=12000355 adj=12000668 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.43 cputime=1.470 memavail=520292 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 64.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=497 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=24 freq=12000355 adj=12000668 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.43 cputime=1.475 memavail=519560 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 65.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=498 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=25 freq=12000355 adj=12000668 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.39 cputime=1.479 memavail=519560 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 66.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=499 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=26 freq=12000355 adj=12000668 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.39 cputime=1.484 memavail=519560 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Stats 67.7: gcodein=0 mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000005 bytes_write=2922 bytes_read=7929 bytes_retransmit=514 bytes_invalid=0 send_seq=263 receive_seq=251 retransmit_seq=263 srtt=0.000 rttvar=0.000 rto=1.600 ready_bytes=0 upcoming_bytes=500 freq=167995629 eddy: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=998 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=27 freq=12000355 adj=12000668 heater_bed: target=0 temp=22.4 pwm=0.000 temperature_probe btt_eddy: temp=29.6 btt_eddy_mcu: temp=32.1 sysload=0.39 cputime=1.488 memavail=519560 print_time=51.991 buffer_time=0.000 print_stall=0 extruder: target=0 temp=22.3 pwm=0.000
Editor is loading...